// -*- C -*- include include pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall pxp6012_rad_outer = 32.0 / 2 - 0.5; s1930_y = 30.2 + 0.2; s1930_x = 22 + 0.2; s1930_y_outer = 36.4 + 0.2; s1930_x_outer = 27.6 + 0.2; s1930_recess = 3; s1930_around = 3; s1930_behind = 3; wallthick = 2.5; // origin is at centre on outer face wall // outside is towards positive x // mounting is vertical module S1930_Positive(){ d = s1930_recess + s1930_behind; translate([-d/2, 0,0]) cube([d, s1930_x_outer + s1930_around, s1930_y_outer + s1930_around], center=true); } module S1930_Negative(){ cube([60, s1930_x, s1930_y], center=true); translate([1, 0,0]) cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer], center=true); } module TestWall(){ ////toplevel sw_ctr = [25, wallthick, 25]; rotate([0,0,-90]){ difference(){ union(){ cube([50, wallthick, 42]); } translate([30, -1, 20]) rotate([-90,0,0]) cylinder(r = pxp6012_rad, h=10, $fn=60); rotate([90,0,0]) Commitid_BestCount([15,40]); } } difference(){ union(){ cube([50, wallthick, 50]); translate(sw_ctr) rotate([0,0,90]) S1930_Positive(); } translate(sw_ctr) { rotate([0,0,90]) S1930_Negative(); } } } floorth = 2.5; ceilth = 2.5; innertube = 1.0 + 0.2; lidoverlap = 1.5; lidoverhang = 6; tubesealrad = 2.0; ts_xbox = 30; ts_ybox = 25; ts_cnrrad = 10; ts_zbox = 8; include module TestSealBox(){ ////toplevel TestSealBoxBox(); translate(ts_cidoff) Commitid_BestCount([ts_xbox,ts_ybox] - 2*ts_cidoff); } module TestSealLid(){ ////toplevel difference(){ TestSealBoxLid(); translate([ts_xbox * .75, ts_ybox/2, 0]) cylinder(h=100, r=5); translate([-wallthick + ts_cnrrad*.5, ts_cnrrad*.5 - wallthick, ts_zbox + ceilth]) Commitid_BestCount([ts_xbox * .75 - 2.5 - (ts_cnrrad*.5), ts_ybox - (ts_cnrrad*.5 - wallthick)*2]); } } module TestSealLidPrint(){ ////toplevel rotate([180,0,0]) TestSealLid(); } module ProfileDemos(){ WallProfile(); color("blue") FloorProfile(); LidProfile(); color("blue") CeilProfile(); } //TestWall(); //ProfileDemos(); //TestSealBox(); //TestSealLid(); //FArcSegment_mask(350);