chiark / gitweb /
keep some of our own settings
[reprap-play.git] / slic3r-config.ini
1 # generated by Slic3r 0.9.1 on Fri Aug 10 20:20:22 2012
2 acceleration = 0
3 bed_size = 140,140
4 bed_temperature = 60
5 bridge_fan_speed = 100
6 bridge_flow_ratio = 1
7 bridge_speed = 60
8 brim_width = 0
9 complete_objects = 0
10 cooling = 0
11 disable_fan_first_layers = 1
12 duplicate = 1
13 duplicate_distance = 6
14 duplicate_grid = 1,1
15 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
16 external_perimeter_speed = 100%
17 extra_perimeters = 1
18 extruder_clearance_height = 20
19 extruder_clearance_radius = 20
20 extruder_offset = 0x0
21 extrusion_axis = E
22 extrusion_multiplier = 1
23 extrusion_width = 0
24 fan_always_on = 0
25 fan_below_layer_time = 60
26 filament_diameter = 1.77
27 fill_angle = 45
28 fill_density = 0.4
29 fill_pattern = rectilinear
30 first_layer_bed_temperature = 65
31 first_layer_extrusion_width = 200%
32 first_layer_height = 0.5
33 first_layer_speed = 30%
34 first_layer_temperature = 195
35 g0 = 0
36 gcode_arcs = 0
37 gcode_comments = 0
38 gcode_flavor = reprap
39 infill_acceleration = 50
40 infill_every_layers = 1
41 infill_extruder = 1
42 infill_extrusion_width = 0
43 infill_speed = 60
44 layer_gcode = 
45 layer_height = 0.4
46 max_fan_speed = 100
47 min_fan_speed = 35
48 min_print_speed = 10
49 notes = 
50 nozzle_diameter = 0.5
51 output_filename_format = [input_filename_base].gcode
52 perimeter_acceleration = 25
53 perimeter_extruder = 1
54 perimeter_extrusion_width = 0
55 perimeter_speed = 30
56 perimeters = 3
57 post_process = 
58 print_center = 70,70
59 randomize_start = 1
60 retract_before_travel = 2
61 retract_length = 4.5
62 retract_lift = 0.1
63 retract_restart_extra = 0.1
64 retract_speed = 30
65 rotate = 0
66 scale = 1
67 skirt_distance = 12
68 skirt_height = 1
69 skirts = 2
70 slowdown_below_layer_time = 15
71 small_perimeter_speed = 30
72 solid_fill_pattern = rectilinear
73 solid_infill_speed = 60
74 solid_layers = 3
75 start_gcode = G28 ; home all axes
76 support_material = 0
77 support_material_angle = 0
78 support_material_extruder = 1
79 support_material_extrusion_width = 0
80 support_material_pattern = rectilinear
81 support_material_spacing = 2.5
82 support_material_threshold = 45
83 temperature = 190
84 threads = 8
85 top_solid_infill_speed = 50
86 travel_speed = 130
87 use_relative_e_distances = 0
88 z_offset = 0.0