chiark / gitweb /
Makefile: better handling of slic3r config
[reprap-play.git] / slic3r-config.ini
1 acceleration = 0
2 bed_size = 140,140
3 bed_temperature = 70
4 bridge_fan_speed = 100
5 bridge_flow_ratio = 1
6 bridge_speed = 60
7 brim_width = 0
8 complete_objects = 0
9 cooling = 0
10 disable_fan_first_layers = 1
11 duplicate = 1
12 duplicate_distance = 6
13 duplicate_grid = 1,1
14 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 F240 ;240mm/min vertical move\nG1 Z70\nG28 X0 Y0 ; home X and Y axis\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
15 extra_perimeters = 1
16 extruder_clearance_height = 20
17 extruder_clearance_radius = 20
18 extrusion_axis = E
19 extrusion_multiplier = 1.1
20 extrusion_width = 0
21 fan_always_on = 0
22 fan_below_layer_time = 60
23 filament_diameter = 1.8
24 fill_angle = 45
25 fill_density = 0.4
26 fill_pattern = rectilinear
27 first_layer_bed_temperature = 80
28 first_layer_extrusion_width = 0
29 first_layer_height = 100%
30 first_layer_speed = 30%
31 first_layer_temperature = 190
32 g0 = 0
33 gcode_arcs = 0
34 gcode_comments = 0
35 gcode_flavor = reprap
36 infill_acceleration = 50
37 infill_every_layers = 1
38 infill_extrusion_width = 0
39 infill_speed = 60
40 layer_gcode = 
41 layer_height = 0.4
42 max_fan_speed = 100
43 min_fan_speed = 35
44 min_print_speed = 10
45 notes = 
46 nozzle_diameter = 0.5
47 output_filename_format = [input_filename_base].gcode
48 perimeter_acceleration = 25
49 perimeter_speed = 30
50 perimeters = 3
51 perimeters_extrusion_width = 0
52 post_process = 
53 print_center = 70,70
54 randomize_start = 1
55 retract_before_travel = 2
56 retract_length = 4.5
57 retract_lift = 0.1
58 retract_restart_extra = 0.1
59 retract_speed = 30
60 rotate = 0
61 scale = 1
62 skirt_distance = 12
63 skirt_height = 1
64 skirts = 2
65 slowdown_below_layer_time = 15
66 small_perimeter_speed = 30
67 solid_fill_pattern = rectilinear
68 solid_infill_speed = 60
69 solid_layers = 3
70 start_gcode = G28 ; home all axes
71 support_material = 0
72 support_material_angle = 0
73 support_material_pattern = rectilinear
74 support_material_spacing = 2.5
75 support_material_threshold = 45
76 support_material_tool = 0
77 temperature = 190
78 threads = 8
79 top_solid_infill_speed = 50
80 travel_speed = 130
81 use_relative_e_distances = 0
82 z_offset = 0.0