slic3r-config.ini

   1 # generated by Slic3r 0.9.1 on Tue Jan 22 02:22:06 2013
   2  =
   3 acceleration = 0
   4 bed_size = 140,150
   5 bed_temperature = 90
   6 bridge_fan_speed = 100
   7 bridge_flow_ratio = 1
   8 bridge_speed = 60
   9 brim_width = 0
  10 complete_objects = 0
  11 cooling = 1
  12 disable_fan_first_layers = 1
  13 duplicate = 1
  14 duplicate_distance = 6
  15 duplicate_grid = 1,1
  16 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
  17 external_perimeter_speed = 100%
  18 extra_perimeters = 1
  19 extruder_clearance_height = 20
  20 extruder_clearance_radius = 20
  21 extruder_offset = 0x0
  22 extrusion_axis = E
  23 extrusion_multiplier = 1.0
  24 extrusion_width = 0
  25 fan_always_on = 0
  26 fan_below_layer_time = 60
  27 filament_diameter = 1.77
  28 fill_angle = 45
  29 fill_density = 0.2
  30 fill_pattern = rectilinear
  31 first_layer_bed_temperature = 80
  32 first_layer_extrusion_width = 200%
  33 first_layer_height = 0.4
  34 first_layer_speed = 30%
  35 first_layer_temperature = 215
  36 g0 = 0
  37 gcode_arcs = 0
  38 gcode_comments = 0
  39 gcode_flavor = reprap
  40 infill_acceleration = 50
  41 infill_every_layers = 1
  42 infill_extruder = 1
  43 infill_extrusion_width = 0
  44 infill_speed = 60
  45 layer_gcode =
  46 layer_height = 0.4
  47 max_fan_speed = 100
  48 min_fan_speed = 35
  49 min_print_speed = 10
  50 notes =
  51 nozzle_diameter = 0.50
  52 output_filename_format = [input_filename_base].gcode
  53 perimeter_acceleration = 25
  54 perimeter_extruder = 1
  55 perimeter_extrusion_width = 100%
  56 perimeter_speed = 30
  57 perimeters = 2
  58 post_process =
  59 print_center = 70,70
  60 randomize_start = 1
  61 retract_before_travel = 2
  62 retract_length = 4.5
  63 retract_lift = 0.1
  64 retract_restart_extra = 0
  65 retract_speed = 30
  66 rotate = 0
  67 scale = 1
  68 skirt_distance = 3
  69 skirt_height = 1
  70 skirts = 2
  71 slowdown_below_layer_time = 15
  72 small_perimeter_speed = 30
  73 solid_fill_pattern = rectilinear
  74 solid_infill_speed = 60
  75 solid_layers = 3
  76 start_gcode = G28 ; home all axes
  77 support_material = 0
  78 support_material_angle = 0
  79 support_material_extruder = 1
  80 support_material_extrusion_width = 0
  81 support_material_pattern = rectilinear
  82 support_material_spacing = 2.5
  83 support_material_threshold = 45
  84 temperature = 205
  85 threads = 8
  86 top_solid_infill_speed = 50
  87 travel_speed = 130
  88 use_relative_e_distances = 0
  89 z_offset = 0