slic3r-config.ini

   1 # generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
   2 acceleration = 0
   3 bed_size = 140,140
   4 bed_temperature = 100
   5 bottom_solid_layers = 3
   6 bridge_fan_speed = 100
   7 bridge_flow_ratio = 1
   8 bridge_speed = 60
   9 brim_width = 0
  10 complete_objects = 0
  11 cooling = 1
  12 disable_fan_first_layers = 1
  13 duplicate = 1
  14 duplicate_distance = 6
  15 duplicate_grid = 1,1
  16 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
  17 external_perimeter_speed = 100%
  18 extra_perimeters = 1
  19 extruder_clearance_height = 20
  20 extruder_clearance_radius = 20
  21 extruder_offset = 0x0
  22 extrusion_axis = E
  23 extrusion_multiplier = 1.0
  24 extrusion_width = 0
  25 fan_always_on = 0
  26 fan_below_layer_time = 60
  27 filament_diameter = 1.77
  28 fill_angle = 45
  29 fill_density = 0.2
  30 fill_pattern = rectilinear
  31 first_layer_bed_temperature = 90
  32 first_layer_extrusion_width = 200%
  33 first_layer_height = 0.4
  34 first_layer_speed = 30%
  35 first_layer_temperature = 215
  36 g0 = 0
  37 gap_fill_speed = 20
  38 gcode_arcs = 0
  39 gcode_comments = 0
  40 gcode_flavor = reprap
  41 infill_acceleration = 50
  42 infill_every_layers = 1
  43 infill_extruder = 1
  44 infill_extrusion_width = 0
  45 infill_speed = 60
  46 layer_gcode =
  47 layer_height = 0.4
  48 max_fan_speed = 100
  49 min_fan_speed = 35
  50 min_print_speed = 10
  51 min_skirt_length = 0
  52 notes =
  53 nozzle_diameter = 0.50
  54 only_retract_when_crossing_perimeters = 0
  55 output_filename_format = [input_filename_base].gcode
  56 perimeter_acceleration = 25
  57 perimeter_extruder = 1
  58 perimeter_extrusion_width = 100%
  59 perimeter_speed = 30
  60 perimeters = 2
  61 post_process =
  62 print_center = 70,70
  63 randomize_start = 1
  64 retract_before_travel = 2
  65 retract_length = 4.5
  66 retract_length_toolchange = 3
  67 retract_lift = 0.1
  68 retract_restart_extra = 0
  69 retract_restart_extra_toolchange = 0
  70 retract_speed = 30
  71 rotate = 0
  72 scale = 1
  73 skirt_distance = 3
  74 skirt_height = 1
  75 skirts = 2
  76 slowdown_below_layer_time = 15
  77 small_perimeter_speed = 30
  78 solid_fill_pattern = rectilinear
  79 solid_infill_below_area = 70
  80 solid_infill_every_layers = 0
  81 solid_infill_speed = 60
  82 start_gcode = G28 ; home all axes
  83 support_material = 0
  84 support_material_angle = 0
  85 support_material_extruder = 1
  86 support_material_extrusion_width = 0
  87 support_material_pattern = rectilinear
  88 support_material_spacing = 2.5
  89 support_material_speed = 60
  90 support_material_threshold = 45
  91 temperature = 205
  92 threads = 8
  93 top_solid_infill_speed = 50
  94 top_solid_layers = 3
  95 travel_speed = 130
  96 use_relative_e_distances = 0
  97 vibration_limit = 0
  98 z_offset = 0