chiark / gitweb /
crossbar-computer-led-mount: wip TowerBulkCrossSection
[reprap-play.git] / slic3r-config.ini
1 # generated by Slic3r 0.9.7 on Sun Dec 16 20:42:19 2012
2 acceleration = 0
3 bed_size = 140,140
4 bed_temperature = 100
5 bottom_solid_layers = 3
6 bridge_fan_speed = 100
7 bridge_flow_ratio = 1
8 bridge_speed = 60
9 brim_width = 0
10 complete_objects = 0
11 cooling = 1
12 disable_fan_first_layers = 1
13 duplicate = 1
14 duplicate_distance = 6
15 duplicate_grid = 1,1
16 end_gcode = M83 ; extruder relative\nG1 F1000 ;1000mm/min extrusion\nG1 E-10; retract\nG1 X0 Y0 F10000\nG28 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off bed\nM84     ; disable motors
17 external_perimeter_speed = 100%
18 extra_perimeters = 1
19 extruder_clearance_height = 20
20 extruder_clearance_radius = 20
21 extruder_offset = 0x0
22 extrusion_axis = E
23 extrusion_multiplier = 1.0
24 extrusion_width = 0
25 fan_always_on = 0
26 fan_below_layer_time = 60
27 filament_diameter = 1.77
28 fill_angle = 45
29 fill_density = 0.2
30 fill_pattern = rectilinear
31 first_layer_bed_temperature = 90
32 first_layer_extrusion_width = 200%
33 first_layer_height = 0.4
34 first_layer_speed = 30%
35 first_layer_temperature = 215
36 g0 = 0
37 gap_fill_speed = 20
38 gcode_arcs = 0
39 gcode_comments = 0
40 gcode_flavor = reprap
41 infill_acceleration = 50
42 infill_every_layers = 1
43 infill_extruder = 1
44 infill_extrusion_width = 0
45 infill_speed = 60
46 layer_gcode = 
47 layer_height = 0.4
48 max_fan_speed = 100
49 min_fan_speed = 35
50 min_print_speed = 10
51 min_skirt_length = 0
52 notes = 
53 nozzle_diameter = 0.50
54 only_retract_when_crossing_perimeters = 0
55 output_filename_format = [input_filename_base].gcode
56 perimeter_acceleration = 25
57 perimeter_extruder = 1
58 perimeter_extrusion_width = 100%
59 perimeter_speed = 30
60 perimeters = 2
61 post_process = 
62 print_center = 70,70
63 randomize_start = 1
64 retract_before_travel = 2
65 retract_length = 4.5
66 retract_length_toolchange = 3
67 retract_lift = 0.1
68 retract_restart_extra = 0
69 retract_restart_extra_toolchange = 0
70 retract_speed = 30
71 rotate = 0
72 scale = 1
73 skirt_distance = 3
74 skirt_height = 1
75 skirts = 2
76 slowdown_below_layer_time = 15
77 small_perimeter_speed = 30
78 solid_fill_pattern = rectilinear
79 solid_infill_below_area = 70
80 solid_infill_every_layers = 0
81 solid_infill_speed = 60
82 start_gcode = G28 ; home all axes
83 support_material = 0
84 support_material_angle = 0
85 support_material_extruder = 1
86 support_material_extrusion_width = 0
87 support_material_pattern = rectilinear
88 support_material_spacing = 2.5
89 support_material_speed = 60
90 support_material_threshold = 45
91 temperature = 205
92 threads = 8
93 top_solid_infill_speed = 50
94 top_solid_layers = 3
95 travel_speed = 130
96 use_relative_e_distances = 0
97 vibration_limit = 0
98 z_offset = 0