pattress-boxes-3-cover.scad

   1 // -*- C -*-
   2
   3 patbox_side = 87;
   4 patbox_centres = 60.3;
   5
   6 lid_thinboxbase_overlap = 5;
   7 lid_fatbox_overlap = 12;
   8
   9 lid_thinbox_h = 9;
  10 lid_fatbox_h = 24;
  11 lid_fatbox_switches_h = 6+2;
  12
  13 lid_max_switches_w = 70;
  14 lid_switches_y_slop = 3;
  15
  16 total_len = 260;
  17 thinbox_len = 87;
  18
  19 rail_overlap = 8;
  20
  21 lid_top_wall = 1.5;
  22 lid_front_wall = 1.5;
  23 lid_side_wall = 1.5;
  24
  25 peg_engage_depth = 1;
  26 peg_engage_dia = 6.5;
  27 peg_main_dia = 9;
  28 peg_max_dia = 15;
  29 peg_inner_dia = 3.5;
  30 peg_top_thick = 1;
  31 peg_straight_len = 3;
  32
  33 peg_inner_slop = 0.2;
  34 peg_outer_slop = 0.1;
  35
  36 peg_slope = 1;
  37
  38 lid_side_slop = 0.5;
  39 lid_rail_behindslop = 0.5;
  40
  41 // computed
  42
  43 lid_inner_max_h =
  44   lid_thinboxbase_overlap + lid_fatbox_h + lid_fatbox_switches_h;
  45 lid_inner_min_h = lid_fatbox_overlap + lid_fatbox_switches_h;
  46
  47 lid_inner_kink = [thinbox_len, thinbox_len*2];
  48
  49 lid_inner_w_nom = patbox_side;
  50 lid_inner_w = lid_inner_w_nom + lid_side_slop * 2;
  51
  52 lid_seatline_w = (lid_inner_w - lid_max_switches_w)/2 - lid_switches_y_slop;
  53
  54 lid_seatline_h = lid_fatbox_switches_h;
  55
  56 echo(lid_seatline_w);
  57
  58 peg_main_height = peg_straight_len + (peg_max_dia - peg_main_dia)/2/peg_slope;
  59
  60 echo(peg_main_height);
  61
  62 thinbox_front_z = lid_fatbox_switches_h + lid_fatbox_h - lid_thinbox_h;
  63
  64 raillen = patbox_side/2 + rail_overlap;
  65
  66 module LidSideProfile(){
  67   polygon([[-lid_top_wall,     lid_inner_max_h],
  68            [lid_inner_kink[0], lid_inner_max_h],
  69            [lid_inner_kink[1], lid_inner_min_h],
  70            [total_len,         lid_inner_min_h],
  71            [total_len,         -lid_front_wall],
  72            [-lid_top_wall,     -lid_front_wall]]);
  73 }
  74
  75 module RailProfile(lslop=0.1){
  76   yt_base = thinbox_front_z;
  77   yt = yt_base - lid_rail_behindslop;
  78   pegx = (lid_inner_w_nom - patbox_centres)/2;
  79
  80   polygon([[-lslop,                  yt],
  81            [pegx - peg_main_dia/2, yt],
  82            [pegx - peg_main_dia/2, yt_base - peg_straight_len],
  83            [-lslop,
  84             yt_base - peg_straight_len - (pegx - peg_main_dia/2)/peg_slope
  85            -0.1]]);
  86 }
  87
  88 module LidSide(){
  89   overlap = [0.1, 0.1, 0.1];
  90
  91   // main side profile
  92   rotate([90,0,0])
  93     linear_extrude(height= lid_side_wall)
  94     LidSideProfile();
  95
  96   // seatline
  97   translate(-overlap)
  98     cube(overlap + [total_len, lid_seatline_w, lid_seatline_h]);
  99
 100   // lid front
 101   translate([-0.1, -0.1, -lid_front_wall])
 102     cube([total_len+0.1, lid_inner_w/2 + 0.2, lid_front_wall]);
 103
 104   // lid top
 105   translate([-lid_top_wall, -lid_side_wall, -lid_front_wall])
 106     cube([lid_top_wall, lid_inner_w/2 + 10, lid_front_wall + lid_inner_max_h]);
 107
 108   // rail
 109   rotate([90,0,90])
 110     translate([0,0,-0.1])
 111     linear_extrude(height=raillen+0.1) //todo
 112     RailProfile();
 113
 114   // rail end
 115   translate([raillen, 0,0])
 116     intersection(){
 117       rotate_extrude($fn=50)
 118         RailProfile(lslop=0);
 119       translate([0, 25-0.1, 0])
 120         cube(50, center=true);
 121     }
 122 }
 123
 124 module PegProfile(){
 125   polygon([[-peg_engage_depth, (peg_engage_dia - peg_outer_slop)/2],
 126            [0,                 (peg_engage_dia - peg_outer_slop)/2],
 127            [0,                 (peg_main_dia - peg_outer_slop)/2],
 128            [peg_straight_len,  (peg_main_dia - peg_outer_slop)/2],
 129            [peg_main_height,   (peg_max_dia - peg_outer_slop)/2],
 130            [peg_main_height+peg_top_thick, (peg_max_dia - peg_outer_slop)/2],
 131            [peg_main_height+peg_top_thick, (peg_inner_dia + peg_inner_slop)/2],
 132            [-peg_engage_depth,  (peg_inner_dia + peg_inner_slop)/2]]);
 133 }
 134
 135 module Peg(){
 136   rotate_extrude($fn=50)
 137     rotate([0,0,-90])
 138     PegProfile();
 139 }
 140
 141 module AtFixingCentres(){
 142   for (fc=[-1,+1]) {
 143     translate([patbox_side/2 + fc*patbox_centres/2,
 144                patbox_side/2,
 145                0])
 146       children();
 147   }
 148 }
 149
 150 module TopPattressBox(){
 151   difference(){
 152     translate([0,0, -lid_thinbox_h])
 153       cube([patbox_side, patbox_side, lid_thinbox_h]);
 154     AtFixingCentres(){
 155       translate([0,0,-10]) cylinder(r=peg_engage_dia/2, h=20);
 156     }
 157   }
 158 }
 159
 160 module Demo(){
 161   translate([0, -lid_inner_w/2, 0]) LidSide();
 162   translate([0,0, thinbox_front_z])
 163     rotate([0,180,0]) translate([0, -patbox_side/2, 0])
 164     rotate([0,0,90]) union(){
 165       %TopPattressBox();
 166       color("blue") AtFixingCentres(){
 167         rotate([180,0,0]) Peg();
 168       }
 169   }
 170 }
 171
 172 //LidSide();
 173 //PegProfile();
 174 //Peg();
 175 //TopPattressBox();
 176 //RailProfile();
 177 Demo();