Makefile

   1
   2 HRR=/home/reprap
   3 SLIC3R=$(HRR)/Slic3r/bin/slic3r
   4 SKEINFORGE=python $(HRR)/reprappro-software.git/skeinforge/skeinforge_application/skeinforge_utilities/skeinforge_craft.py
   5
   6 CWD := $(shell pwd)
   7 PLAY ?= $(CWD)
   8
   9 CONFIG=$(PLAY)/slic3r-config.ini
  10
  11 USING_AUTOS ?= filamentspool xeno-drivebay-bracket dungeonquest-cone anke-gps-bracket cable-hole-trunking-cover anglepoise-neck crossbar-computer-led-mount wardrobe-hook
  12 AUTO_TOPLEVELS := $(foreach m,$(USING_AUTOS),$(shell $(PLAY)/toplevel-find $m))
  13
  14 AUTO_INCS = funcs.scad
  15
  16 default:        autoincs scads
  17
  18 autoincs:       $(AUTO_INCS)
  19 scads:          $(addsuffix .auto.scad, $(AUTO_TOPLEVELS))
  20 stls:           $(addsuffix .auto.stl, $(AUTO_TOPLEVELS))
  21
  22 %.auto.scads:
  23         $(MAKE) $(addsuffix .auto.scad, $(shell $(PLAY)/toplevel-find $*))
  24 %.auto.stls:
  25         $(MAKE) $(addsuffix .auto.stl, $(shell $(PLAY)/toplevel-find $*))
  26
  27 -include .*.d
  28
  29 %.stl:          %.scad $(AUTO_INCS)
  30                 openscad -d .$@.d.tmp -o $*.tmp.stl $<
  31                 @rm -f $@
  32                 @sed -e 's/\.tmp\.stl:/.stl:/' <.$@.d.tmp >.$@.d
  33                 @rm .$@.d.tmp
  34                 mv -f $*.tmp.stl $@
  35
  36 %.gcode:        %.stl $(CONFIG)
  37                 $(SLIC3R) --load $(CONFIG) \
  38                         --ignore-nonexistent-config --load $*.slic3r \
  39                         --output $@.tmp $<
  40                 @mv -f $@.tmp $@
  41
  42 %.gcode-sd:     %.gcode
  43                 mount /media/sd
  44                 cp $^ /media/sd/JOB.G
  45                 sleep 0.5
  46                 umount /media/sd
  47
  48 %:              %.cpp
  49                 cpp -nostdinc -P <$< >$@.tmp && mv -f $@.tmp $@
  50
  51 #%.gcode:       %.stl
  52 #               $(SKEINFORGE) $<
  53
  54 %.gcode:        manual-gcode-generator %.m-g
  55                 $(PLAY)/$^ >$@.tmp && mv -f $@.tmp $@
  56
  57 dovecliptest.stl: doveclip.scad $(AUTO_INCS)
  58
  59 KNIFEBLOCK_KNIVES= 0 1 2
  60 KNIFEBLOCK_TEMPLATES= bl hl
  61 KNIFEBLOCK_TEMPLATE_FILES=\
  62         $(foreach k,$(KNIFEBLOCK_KNIVES), \
  63         $(foreach t,$(KNIFEBLOCK_TEMPLATES), \
  64         knifeblock-knives-t$k$t.dxf))
  65
  66 knifeblock-knives-templates: $(KNIFEBLOCK_TEMPLATE_FILES)
  67
  68 knifeblock-knives-t%.dxf: knifeblock-knives-filter knifeblock-knives-trace.fig
  69                 ./$< $* <$(filter %.fig, $^) >$@.tmp.fig
  70                 fig2dev -D -30 -L eps <$@.tmp.fig >$@.tmp.eps
  71                 pstoedit -dt -f "dxf: -polyaslines -mm" $@.tmp.eps $@
  72
  73 %:              %.pl
  74                 ./$< >$@.tmp && mv -f $@.tmp $@
  75
  76 %.auto.scad: $(PLAY)/toplevel-make Makefile $(PLAY)/toplevel-find
  77                 @echo ' write $@'
  78                 $< $@ >$@.tmp
  79                 @mv -f $@.tmp $@
  80
  81 .PRECIOUS:      %.stl %.gcode
  82
  83 clean:
  84                 rm -f *~ *.stl *.auto.scad *.gcode .*.d $(AUTO_INCS)