Makefile

   1
   2 HRR=/home/reprap
   3 SLIC3R=$(HRR)/Slic3r/bin/slic3r
   4 SKEINFORGE=python $(HRR)/reprappro-software.git/skeinforge/skeinforge_application/skeinforge_utilities/skeinforge_craft.py
   5
   6 CWD := $(shell pwd)
   7 PLAY ?= $(CWD)
   8
   9 CONFIG=slic3r-config.ini
  10
  11 USING_AUTOS ?= filamentspool
  12 AUTO_TOPLEVELS := $(foreach m,$(USING_AUTOS),$(shell $(PLAY)/toplevel-find $m))
  13
  14 scads:          $(addsuffix .auto.scad, $(AUTO_TOPLEVELS))
  15 stls:           $(addsuffix .auto.stl, $(AUTO_TOPLEVELS))
  16
  17 %.auto.scads:
  18         $(MAKE) $(addsuffix .auto.scad, $(shell $(PLAY)/toplevel-find $*))
  19 %.auto.stls:
  20         $(MAKE) $(addsuffix .auto.stl, $(shell $(PLAY)/toplevel-find $*))
  21
  22 default:
  23
  24 -include .*.d
  25
  26 %.stl:          %.scad
  27                 openscad -d .$@.d.tmp -o $*.tmp.stl $<
  28                 @rm -f $@
  29                 @sed -e 's/\.tmp\.stl:/.stl:/' <.$@.d.tmp >.$@.d
  30                 @rm .$@.d.tmp
  31                 mv -f $*.tmp.stl $@
  32
  33 %.gcode:        $(CONFIG) %.stl
  34                 $(SLIC3R) --load $^ --ignore-nonexistent-config --load $*.slic3r --output $@.tmp
  35                 @mv -f $@.tmp $@
  36
  37 #%.gcode:       %.stl
  38 #               $(SKEINFORGE) $<
  39
  40 %.gcode:        manual-gcode-generator %.m-g
  41                 $(PLAY)/$^ >$@.tmp && mv -f $@.tmp $@
  42
  43 dovecliptest.stl: doveclip.scad
  44
  45 %.auto.scad: $(PLAY)/toplevel-make Makefile $(PLAY)/toplevel-find
  46                 @echo ' write $@'
  47                 $< $@ >$@.tmp
  48                 @mv -f $@.tmp $@
  49
  50 .PRECIOUS:      %.stl %.gcode
  51
  52 clean:
  53                 rm -f *~ *.stl *.auto.scad *.gcode .*.d