From 892532a9395d6b2c9cbaddde8b658fefa13bf7dc Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Fri, 23 Dec 2005 00:06:54 +0100 Subject: [PATCH 1/1] scsi_id: read page 0x80 with libata drives Signed-off-by: Kay Sievers --- extras/scsi_id/scsi_id.config | 39 ++++------------------------------- 1 file changed, 4 insertions(+), 35 deletions(-) diff --git a/extras/scsi_id/scsi_id.config b/extras/scsi_id/scsi_id.config index 4f31b1c49..d1768509a 100644 --- a/extras/scsi_id/scsi_id.config +++ b/extras/scsi_id/scsi_id.config @@ -1,11 +1,8 @@ # -# Informational and example scsi_id.config file for use with scsi_id. -# - -# General syntax is: +# scsi_id configuration # # lower or upper case has no affect on the left side. Quotes (") are -# required if you need spaces in values. Model is the same as the SCSI +# required for spaces in values. Model is the same as the SCSI # INQUIRY product identification field. Per the SCSI INQUIRY, the vendor # is limited to 8 bytes, model to 16 bytes. # @@ -13,36 +10,8 @@ # if you do not want such a match space fill the extra bytes. If no model # is specified, only the vendor string need match. # -# The "options" line is searched for when scsi_id starts up, and is -# primarily for use with hotplug. -# # options= -# # vendor=string[,model=string],options= -# -# If you normally don't need scsi id's, or might be attaching devices of -# an unknown functionality, black list everyone. This is the default -# behaviour (if no -b or -g is specified). -# -options=-b - -# -# Then white list devices on your system that have correct and useful id's: -# -vendor=someone, model=nicedrive, options=-g - -# If you know all the scsi devices on your system support valid id's, -# remove the options=-b line, and mark all devices as good: - -## options=-g - -# Then black list any offenders. Missing entries here could be dangerous -# if you rely on the id for persistent naming or multi-path configuration. - -## vendor=ELBONIA, model=borken, options=-b - -# EMC SYMMETRIX models 4 and 5, and some model 6 systems return the VSI -# field of the page 83 reply according to SCSI-2 format. This format is -# binary encoded hexa-decimal as opposed to the Identifiscation descriptor -# utilized by both SPC-2 and SPC-3 compliant systems. +# some libata drives require vpd page 0x80 +vendor="ATA",options=-p 0x80 -- 2.30.2