chiark / gitweb /
7 years agotmpfiles: --clean -- check for bind mounts of the same filesystem and skip them
Kay Sievers [Wed, 13 Mar 2013 12:12:36 +0000 (13:12 +0100)]
tmpfiles: --clean -- check for bind mounts of the same filesystem and skip them

7 years agocryptsetup-generator: use _cleanup_ where possible
Harald Hoyer [Fri, 8 Mar 2013 09:50:33 +0000 (10:50 +0100)]
cryptsetup-generator: use _cleanup_ where possible

7 years agoadd and
Harald Hoyer [Mon, 4 Mar 2013 18:01:05 +0000 (19:01 +0100)]
add and

Instead of using local-fs*.target in the initrd, use for
sysroot.mount and for /sysroot/usr and friends.

Using would mean to carry over the activated to the isolated and thus in
the real root. Having already active after
deserialization causes ordering problems with the real root services and

We better isolate to targets for, which are
only available in the initrd.

7 years agobuild-sys: use -f with ln -s
Zbigniew Jędrzejewski-Szmek [Wed, 13 Mar 2013 04:55:32 +0000 (00:55 -0400)]
build-sys: use -f with ln -s

Parallel builds would sometimes try to recreate the link,
and fail since 'ln -s' would refuse to overwrite.

7 years agoman: Document the actual behaviour of ExecStopPost
Mathieu Bridon [Wed, 13 Mar 2013 04:43:40 +0000 (12:43 +0800)]
man: Document the actual behaviour of ExecStopPost

The documentation makes it sound like ExecStopPost is only run when
stopping the service with `systemctl stop foo.service`

However, that is not the case, as it also gets run when the service
unexpectedly exists, crashes, or gets SIGKILLed.

7 years agoman,html: say 'systemd 198' in the header
Zbigniew Jędrzejewski-Szmek [Wed, 13 Mar 2013 03:57:09 +0000 (23:57 -0400)]
man,html: say 'systemd 198' in the header

This should help readers of the man or HTML pages know if the documentation
is out of date. An alternative to use a date generated from 'git log' was
considered, but since we try to keep user visible documentation up to date,
showing the project version should be enough.

7 years agoman: strip the comments in man page headers
Zbigniew Jędrzejewski-Szmek [Tue, 12 Mar 2013 21:22:19 +0000 (17:22 -0400)]
man: strip the comments in man page headers

They contained the date, which creates a problem with multiarch
packages, since the generated file would be different each time.

7 years agobuild-sys: break dependency loop between and
Zbigniew Jędrzejewski-Szmek [Wed, 13 Mar 2013 03:05:20 +0000 (23:05 -0400)]
build-sys: break dependency loop between and

The loop was added in d848b9cbfa0ba72 'Move generic specifier functions to shared'.

7 years agoshutdown: move attribute packed to the end of the declaration, so it is not ignored
Michal Sekletar [Tue, 12 Mar 2013 17:32:52 +0000 (18:32 +0100)]
shutdown: move attribute packed to the end of the declaration, so it is not ignored

7 years agomanager: push back animation timer whenever a job finishes
Michal Schmidt [Tue, 12 Mar 2013 21:28:44 +0000 (22:28 +0100)]
manager: push back animation timer whenever a job finishes

The running jobs animation is supposed to hide itself when jobs are
progressing sufficiently fast.

7 years want
Harald Hoyer [Tue, 12 Mar 2013 17:24:44 +0000 (18:24 +0100)] want

This pulls in if is needed.

Previously was not active, if no remote fs was
mounted from /etc/fstab. So, every manual remote fs mount was ordered
against the inactive and

Because was not active, the remote fs was umounted
at time, which was too late (network already down).

Now is active, even if no remote fs is mounted.
On shutdown it is deactivated in the correct order and all manual remote
fs mounts also.

7 years agocore: fix getting information about mount unit
Michal Sekletar [Fri, 8 Mar 2013 14:13:43 +0000 (15:13 +0100)]
core: fix getting information about mount unit

We should not try to get information about mount unit from fragment
if the unit was created because of /proc/self/mountinfo event.

7 years agoudevd: sort into sysinit instead of basic target
Kay Sievers [Tue, 12 Mar 2013 14:35:17 +0000 (15:35 +0100)]
udevd: sort into sysinit instead of basic target

7 years agocore/smack: downgrade info to debug
Zbigniew Jędrzejewski-Szmek [Mon, 11 Mar 2013 22:03:13 +0000 (18:03 -0400)]
core/smack: downgrade info to debug

BogdanR> I think it's cool it supports SMACK and that it encourages
         them to use a propper mount point for smackfs but I don't
         think it's cool that it's printing on the screen even when
         I parse quiet to the kernel that "SMACK support is not
         enabled ...".

7 years agoRemove or indent #define GNU_SOURCE
Zbigniew Jędrzejewski-Szmek [Mon, 11 Mar 2013 22:03:13 +0000 (18:03 -0400)]
Remove or indent #define GNU_SOURCE

It is only needed in files designed to be usable in standalone
compilation. In those files the #ifdefinery is indented. When
compiling in-tree, GNU_SOURCE is always defined, so remove one

7 years agobootchart: bump RLIMIT_NOFILE only after we forked us off, so that the init system...
Lennart Poettering [Mon, 11 Mar 2013 21:54:36 +0000 (22:54 +0100)]
bootchart: bump RLIMIT_NOFILE only after we forked us off, so that the init system inherits the kernel default

7 years agobootchart: various superficial cleanups
Lennart Poettering [Mon, 11 Mar 2013 21:47:58 +0000 (22:47 +0100)]
bootchart: various superficial cleanups

Let's update bootchar to share the coding style a bit more with the rest
of the package.

- Some tabs/spaces fixes

- add #pragma to header

- split up header so that we have a 1:1 relation between .c and .h files
  like everywhere else

- Prefix user command line arguments/configuration settings with "arg_".

- other coding style fixes

7 years agobootchart: rename log.c to store.c to aovid confusion with src/shared/log.c
Lennart Poettering [Mon, 11 Mar 2013 18:18:50 +0000 (19:18 +0100)]
bootchart: rename log.c to store.c to aovid confusion with src/shared/log.c

7 years agoupdate TODO
Lennart Poettering [Mon, 11 Mar 2013 16:49:33 +0000 (17:49 +0100)]
update TODO

7 years agoUpdate .gitignore
Michael Biebl [Mon, 11 Mar 2013 16:07:01 +0000 (17:07 +0100)]
Update .gitignore

for the changes in 7b40ce553f0ec9487077e53f5bdc46580025901c

7 years agojournald: allow priority of 999, too
Lennart Poettering [Mon, 11 Mar 2013 14:10:29 +0000 (15:10 +0100)]
journald: allow priority of 999, too

7 years agoMove udevadm to rootbindir
Michael Biebl [Mon, 11 Mar 2013 06:17:39 +0000 (07:17 +0100)]
Move udevadm to rootbindir

The udevadm utility is needed during early boot, so move it to
rootbindir to support split-/usr configurations.

7 years agobootctl: print Options only when found
Kay Sievers [Sun, 10 Mar 2013 22:18:50 +0000 (23:18 +0100)]
bootctl: print Options only when found

7 years agobootctl: print secure boot flags
Kay Sievers [Sun, 10 Mar 2013 21:47:56 +0000 (22:47 +0100)]
bootctl: print secure boot flags

7 years agoFix typos of /etc/systemd/systemd
Zbigniew Jędrzejewski-Szmek [Sat, 9 Mar 2013 23:55:31 +0000 (18:55 -0500)]
Fix typos of /etc/systemd/systemd

<Lekensteyn> The 198 announcement mentions
             "/etc/systemd/systemd/foobar.service.d/*.conf", is that a
             typo? I only have a /etc/systemd/system/. Is there a
             manpage describing this new feature?

7 years agoTODO: update
Kay Sievers [Sat, 9 Mar 2013 17:14:54 +0000 (18:14 +0100)]
TODO: update

7 years agopython/docs: use the same links on top as in man pages
Zbigniew Jędrzejewski-Szmek [Sat, 9 Mar 2013 14:55:03 +0000 (09:55 -0500)]
python/docs: use the same links on top as in man pages

I forgot to commit the layout file, because it was gitignored.
Fixed now.

7 years agohtml: make python docs look more like the rest
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 18:46:21 +0000 (13:46 -0500)]
html: make python docs look more like the rest

The result is ugly enough, I hope, to motivate someone with
design skills to fix it.

7 years agosystemd-python: provide version info to sphinx
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 16:45:37 +0000 (11:45 -0500)]
systemd-python: provide version info to sphinx

7 years agoman: use lxml for faster generation and pretty printing
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 01:13:40 +0000 (20:13 -0500)]
man: use lxml for faster generation and pretty printing

7 years agobuild-sys: generate links for html alias pages
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 16:03:50 +0000 (11:03 -0500)]
build-sys: generate links for html alias pages

7 years agobuild-sys: assemble HTML in docs/html
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 15:27:44 +0000 (10:27 -0500)]
build-sys: assemble HTML in docs/html

The goal is to be able to preview how the documenation
will look when uploaded. Just point your browser at

7 years agobuild-sys: clean up make clean
Zbigniew Jędrzejewski-Szmek [Fri, 8 Mar 2013 14:58:29 +0000 (09:58 -0500)]
build-sys: clean up make clean

7 years agobuild-sys: fix distcheck
Zbigniew Jędrzejewski-Szmek [Sat, 9 Mar 2013 04:06:55 +0000 (23:06 -0500)]
build-sys: fix distcheck

7 years agobuild-sys: don't hard-code binary paths in initrd-*.service
Michael Biebl [Sat, 9 Mar 2013 08:46:11 +0000 (09:46 +0100)]
build-sys: don't hard-code binary paths in initrd-*.service

Instead use @bindir@ for udevadm and @rootbindir@ for systemctl.

7 years agoanalyze: use defines where we don't need static variables
Lennart Poettering [Fri, 8 Mar 2013 18:10:24 +0000 (19:10 +0100)]
analyze: use defines where we don't need static variables

7 years agoanalyze: by now, systemd-analyze is hardly all my work
Lennart Poettering [Fri, 8 Mar 2013 18:03:50 +0000 (19:03 +0100)]
analyze: by now, systemd-analyze is hardly all my work

7 years agoanalyze: various cleanups
Lennart Poettering [Fri, 8 Mar 2013 17:58:08 +0000 (18:58 +0100)]
analyze: various cleanups

Update systemd-analyze to follow the coding style of the other tools
more closely. Also, update the CODING_STYLE to document this for future


- Always use usec_t for time units, so that we always use the same types
  everywhere, and format times the same way as everywhere else.

- Add "static" to global variables

- Make sure we can always distuingish OOM and other errors: ensure we
  always return useful error codes from all functions.

- Always free unit_times array

7 years agoupdate TODO
Lennart Poettering [Fri, 8 Mar 2013 13:01:06 +0000 (14:01 +0100)]
update TODO

7 years agoupdate TODO
Lennart Poettering [Fri, 8 Mar 2013 12:49:14 +0000 (13:49 +0100)]
update TODO

7 years agojournal: allow priority 0 in stdout stream
Michal Schmidt [Fri, 8 Mar 2013 11:05:48 +0000 (12:05 +0100)]
journal: allow priority 0 in stdout stream

Priority 0 is acceptable (it's LOG_EMERG).

BTW, I'm not sure why we allow priorities up to 999, but I'm leaving
this be for now.

7 years agoutil: fix printing of welcome message
Michal Schmidt [Fri, 8 Mar 2013 09:46:26 +0000 (10:46 +0100)]
util: fix printing of welcome message

Commit 984a2be4 failed to adjust this caller of status_printf().

7 years agopath: avoid an allocation in path_spec_watch
Michal Schmidt [Wed, 6 Mar 2013 18:28:55 +0000 (19:28 +0100)]
path: avoid an allocation in path_spec_watch

No need for strdup. We can slice the path in place if we always undo it

7 years agoshared: inline trivial auto-cleanup functions
Michal Schmidt [Wed, 6 Mar 2013 13:44:51 +0000 (14:44 +0100)]
shared: inline trivial auto-cleanup functions

7 years agoshared: remove pointless checks in auto-cleanup functions
Michal Schmidt [Wed, 6 Mar 2013 13:17:59 +0000 (14:17 +0100)]
shared: remove pointless checks in auto-cleanup functions

The argument given to the __attribute__((cleanup)) functions is the
address of the variable that's going out of scope. It cannot be NULL.
The "if (!s)" check in set_freep() is pointless.

Perhaps "if (!*s)" was intented. But that's pointless too, because
set_free()/set_free_free() are OK to call with a NULL argument (just
like free()).

Setting "*s = NULL" is pointless, because the variable that s points
to is about to go out of scope.

The same holds for strv_freep().

7 years agoupdate TODO
Lennart Poettering [Thu, 7 Mar 2013 12:39:57 +0000 (13:39 +0100)]
update TODO

7 years agotest-util: add more tests
Thomas Hindoe Paaboel Andersen [Thu, 7 Mar 2013 21:45:22 +0000 (22:45 +0100)]
test-util: add more tests

Improve test coverage a bit with tests for
  strappend (to cover all ways through strnappend)

7 years agocore: if we cannot JOB_ISOLATE the default target JOB_REPLACE it instead v198
Lennart Poettering [Thu, 7 Mar 2013 21:18:34 +0000 (22:18 +0100)]
core: if we cannot JOB_ISOLATE the default target JOB_REPLACE it instead

In order to maintain compatibility with older initrds which do not have
AllowIsolate=yes set for their target units, fallback to JOB_REPLACE if
JOB_ISOLATE doesn't work, but complain about it.

7 years agobuild-sys: bump release and sonames
Lennart Poettering [Thu, 7 Mar 2013 20:53:53 +0000 (21:53 +0100)]
build-sys: bump release and sonames

7 years agojournalctl: imply -n1000 when -e is used
Lennart Poettering [Thu, 7 Mar 2013 20:49:12 +0000 (21:49 +0100)]
journalctl: imply -n1000 when -e is used

Make sure the pager does not have to buffer an unbounded number of log
messages, by default.

7 years agoupdate TODO
Lennart Poettering [Thu, 7 Mar 2013 20:48:17 +0000 (21:48 +0100)]
update TODO

7 years agopager: add -M to $LESS to make the bottom line nicer
Lennart Poettering [Thu, 7 Mar 2013 20:42:25 +0000 (21:42 +0100)]
pager: add -M to $LESS to make the bottom line nicer

7 years agoRevert "bootchart: use _cleanup_close_"
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 20:28:03 +0000 (15:28 -0500)]
Revert "bootchart: use _cleanup_close_"

This reverts commit 0ea9530d401827e299c6e04a433e69a7a2a89d80.

attribute(cleanup) can only be used inside functions (*of, sysfd
are leaked).

Cleanup functions are only called once when exiting scope (*f
is leaked twice).

7 years agosystemd-python: fix segfault on double close
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 20:32:33 +0000 (15:32 -0500)]
systemd-python: fix segfault on double close

7 years agosystemd-python: fix typos
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 20:27:30 +0000 (15:27 -0500)]
systemd-python: fix typos

7 years agoman/*.html: link to directives, python, guvev, libudev in headers
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 18:13:44 +0000 (13:13 -0500)]
man/*.html: link to directives, python, guvev, libudev in headers

Since the HTML files are in different directories during build
and on fd.o, links are broken in the build directory. This could
be fixed by moving stuff around, or by modifying the files during
upload, but I think that people do not usually create HTML files
for local browsing, and this is not necessary.

7 years agobuild-sys: move sphinx output to docs/python-systemd
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 19:42:27 +0000 (14:42 -0500)]
build-sys: move sphinx output to docs/python-systemd

And on fd.o it goes into a dir parallel to man/.

7 years agopager: always override LESS
Lennart Poettering [Thu, 7 Mar 2013 20:28:09 +0000 (21:28 +0100)]
pager: always override LESS

Primary reason to do this is to ensure "-e" works as intended, and is
not ignored because the user set his own LESS variable.

7 years agoUpdate NEWS
Lennart Poettering [Thu, 7 Mar 2013 20:28:05 +0000 (21:28 +0100)]
Update NEWS

7 years agopager: introduce "jump to end" option
Harald Hoyer [Thu, 7 Mar 2013 19:44:35 +0000 (20:44 +0100)]
pager: introduce "jump to end" option

$ journalctl -be

is what you want :)

7 years agoupdate NEWS
Lennart Poettering [Thu, 7 Mar 2013 20:08:04 +0000 (21:08 +0100)]
update NEWS

7 years agoNEWS: update
Kay Sievers [Thu, 7 Mar 2013 20:07:52 +0000 (21:07 +0100)]
NEWS: update

<mbiebl> "this allows resetting" <- I was told this is not correct English, too: "this allows one to reset"
<notting> "adds the ability to reset"?

7 years ago<mbiebl> poettering: small typo in the NEWS file: directory systems looks for <-...
Kay Sievers [Thu, 7 Mar 2013 20:04:30 +0000 (21:04 +0100)]
<mbiebl> poettering: small typo in the NEWS file: directory systems looks for <- systemd
<mbiebl> the sentence reads a bit strange "looks for units in"
<mbiebl> " by assigning the empty strings to them" <- an empty string or the empty string
<mbiebl> "this allows resetting" <- I was told this is not correct English, too: "this allows one to reset"

7 years agoupdate TODO
Lennart Poettering [Thu, 7 Mar 2013 19:46:35 +0000 (20:46 +0100)]
update TODO

7 years agoupdate NEWS
Lennart Poettering [Thu, 7 Mar 2013 19:46:27 +0000 (20:46 +0100)]
update NEWS

7 years agobootchart: use _cleanup_close_
Nathaniel Chen [Thu, 7 Mar 2013 19:09:16 +0000 (11:09 -0800)]
bootchart: use _cleanup_close_

use _cleanup_{close_,fclose_} to close streams and file descriptors

7 years agocore: mount and initialize Smack
Nathaniel Chen [Thu, 7 Mar 2013 19:06:58 +0000 (11:06 -0800)]
core: mount and initialize Smack

SMACK is the Simple Mandatory Access Control Kernel, a minimal
approach to Access Control implemented as a kernel LSM.

The kernel exposes the smackfs filesystem API through which access
rules can be loaded. At boot time, we want to load the access rules
as early as possible to ensure all early boot steps are checked by Smack.

This patch mounts smackfs at the new location at /sys/fs/smackfs for
kernels 3.8 and above. The /smack mountpoint is not supported.
After mounting smackfs, rules are loaded from the usual location.

For more information about Smack see:

7 years agocore: move mount_setup_early() to main.c
Nathaniel Chen [Thu, 7 Mar 2013 19:06:57 +0000 (11:06 -0800)]
core: move mount_setup_early() to main.c

move mount_setup_early() call to main.c, before security module setup,
so there are no more repeat calls.

7 years agoNEWS: update
Kay Sievers [Thu, 7 Mar 2013 19:44:26 +0000 (20:44 +0100)]
NEWS: update

7 years agoTODO: update
Kay Sievers [Thu, 7 Mar 2013 19:39:12 +0000 (20:39 +0100)]
TODO: update

7 years agoupdate NEWS
Lennart Poettering [Thu, 7 Mar 2013 19:25:12 +0000 (20:25 +0100)]
update NEWS

7 years agohwdb: update
Kay Sievers [Thu, 7 Mar 2013 18:42:51 +0000 (19:42 +0100)]
hwdb: update

7 years agobuild-sys: check if manpage ids match file names
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 18:04:17 +0000 (13:04 -0500)]
build-sys: check if manpage ids match file names

Commit ed1553a fixed current errors, but this error is easy to
make. A wrong id messes up the indexes and linking, so it is
better to catch this automatically.

7 years agoTODO: python stuff and freeze and standby
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 17:41:22 +0000 (12:41 -0500)]
TODO: python stuff and freeze and standby

7 years agocore: don't complain about kernel command line arguments in...
Lennart Poettering [Thu, 7 Mar 2013 17:39:06 +0000 (18:39 +0100)]
core: don't complain about kernel command line arguments in PID 1

7 years agosystemd-python: update documentation for new systemd-journal group
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 16:29:01 +0000 (11:29 -0500)]
systemd-python: update documentation for new systemd-journal group

7 years agosystemd-python: refuse path and flags together in __init__
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 16:28:44 +0000 (11:28 -0500)]
systemd-python: refuse path and flags together in __init__

It's better to explictly check, instead of just documenting it.

The return value from init is changed from 1 to -1 on error.
Python seems to ignore 1 every second time. Looks like a bug
in Python, but the return value doesn't seem to be documented
anywhere, and -1 works as expected... so let's just use that.

7 years agobuild-sys: force creation of symlink
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 15:15:20 +0000 (10:15 -0500)]
build-sys: force creation of symlink

For some reason make sometimes wants to rerun this, and
ln would refuse to recreate the link.

7 years agologind: don't hit an assert if an close() on an input device fd fails with ENODEV...
Lennart Poettering [Thu, 7 Mar 2013 15:48:14 +0000 (16:48 +0100)]
logind: don't hit an assert if an close() on an input device fd fails with ENODEV because the device is gone

7 years agosystemctl: mangle unit name in is-enabled
Lukas Nykryn [Thu, 7 Mar 2013 15:09:20 +0000 (16:09 +0100)]
systemctl: mangle unit name in is-enabled

7 years agobootchart: document -C, --cmdline parameter
Harald Hoyer [Thu, 7 Mar 2013 15:19:38 +0000 (16:19 +0100)]
bootchart: document -C, --cmdline parameter

7 years agobootchart: use _cleanup_fclose_
Harald Hoyer [Thu, 7 Mar 2013 07:52:56 +0000 (08:52 +0100)]
bootchart: use _cleanup_fclose_

7 years agobootchart: rename global len to samples_len
Harald Hoyer [Thu, 7 Mar 2013 07:52:55 +0000 (08:52 +0100)]
bootchart: rename global len to samples_len

7 years agobootchart: add parameter "-C" to expand process names to the full cmdline
Harald Hoyer [Thu, 7 Mar 2013 07:52:54 +0000 (08:52 +0100)]
bootchart: add parameter "-C" to expand process names to the full cmdline

7 years agoutil: Fix grammar in comment
Jan Janssen [Thu, 7 Mar 2013 14:12:46 +0000 (15:12 +0100)]
util: Fix grammar in comment

7 years agoman: Unify title for configuration files
Jan Janssen [Thu, 7 Mar 2013 14:12:45 +0000 (15:12 +0100)]
man: Unify title for configuration files

7 years agoman: Fix id attributes
Jan Janssen [Thu, 7 Mar 2013 14:12:44 +0000 (15:12 +0100)]
man: Fix id attributes

7 years agovirt: check for /sys/hypervisor/type for detecting xen PV
Lennart Poettering [Thu, 7 Mar 2013 14:59:26 +0000 (15:59 +0100)]
virt: check for /sys/hypervisor/type for detecting xen PV

7 years agonspawn: create a separate devpts namespace for nspawn containers
Lennart Poettering [Thu, 7 Mar 2013 12:34:07 +0000 (13:34 +0100)]
nspawn: create a separate devpts namespace for nspawn containers

7 years agoman/kernel-install.xml: fix paths to reflect actual behaviour
Harald Hoyer [Thu, 7 Mar 2013 08:27:59 +0000 (09:27 +0100)]
man/kernel-install.xml: fix paths to reflect actual behaviour

7 years agolibsystemd-journal: return 0 on success in get_data()
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 05:40:30 +0000 (00:40 -0500)]
libsystemd-journal: return 0 on success in get_data()

The man page says so. Right now 0 would be returned if the data was encrypted,
1 otherwise.

7 years agosystemd-python: export sd_j_get_fd, sd_j_reliable_fd, sd_j_close
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 05:35:28 +0000 (00:35 -0500)]
systemd-python: export sd_j_get_fd, sd_j_reliable_fd, sd_j_close

sd_journal_get_fd(j) is called j.fileno(), for compatiblity with
Python conventions for file-like objects.

More importantly, those new .seek_head() and .seek_tail() do not
call .get_next(). This is better, if one wants to skip before
retrieving an entry.

7 years agosystemd-python: split .seek() into .seek_head() and .seek_tail()
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 05:26:24 +0000 (00:26 -0500)]
systemd-python: split .seek() into .seek_head() and .seek_tail()

This way python code follows the original interface more closely.
Also, .seek(0, journal.SEEK_END) was just to much to type.

7 years agosystemd-python: catch only ValueErrors in conversion code
Zbigniew Jędrzejewski-Szmek [Thu, 7 Mar 2013 03:15:46 +0000 (22:15 -0500)]
systemd-python: catch only ValueErrors in conversion code

First of all, 'try: ... except: ...' (with no exception specified) is
always a no-no, since it catches all BaseExceptions, which includes ^C
and other stuff which should almost never be caught.

Now the conversion is stricter, and only one conversion is attempted,
and only a ValueEror is caught. It seems reasonable to catch ValueErrors,
since the entries in the journal are not verified, and any erroneous
application might log a field which cannot be converted. The consumer
of events must only check if a field is an instance of bytes and can
otherwise assume that the conversion was performed correctly.

Order of arguments in Reader.__init__ has been changed to match order
in _Reader.__init__.

Conversions have been updated to work under Python 2 and 3.

7 years agoman: fix compilation of example
Zbigniew Jędrzejewski-Szmek [Wed, 6 Mar 2013 22:07:42 +0000 (17:07 -0500)]
man: fix compilation of example

7 years agoservice: sysv - properly handle init scripts with .sh suffix
Michael Biebl [Wed, 6 Mar 2013 22:24:31 +0000 (23:24 +0100)]
service: sysv - properly handle init scripts with .sh suffix

Dropping the distribution specific #ifdefs in
88516c0c952b9502e8ef1d6a1481af61b0fb422d broke the .sh suffix stripping
since we now always used the else clause of the rc. check.

We eventually want to drop the rc. prefix stripping, but for now we
assume that no sysv init script uses both an rc. prefix and .sh suffix,
so make the check for the .sh suffix and rc. prefix mutually exclusive.

7 years agolibsystemd-journal: export new function, increase library version
Zbigniew Jędrzejewski-Szmek [Wed, 6 Mar 2013 18:19:45 +0000 (13:19 -0500)]
libsystemd-journal: export new function, increase library version

Since sd_journal_reliable_fd wasn't exported before, it is as if
it was added now. Library "current" number must be bumped.

michich> Someone links with the fixed version and produces a RPM with
         his program. The RPM will happily install on a system with an
         old systemd version (the deps will appear fine), but the
         program will fail to run.

7 years agoREADME: more CONFIG_* updates
Kay Sievers [Wed, 6 Mar 2013 19:01:45 +0000 (20:01 +0100)]
README: more CONFIG_* updates

7 years agoREADME: remove CONFIG_HOTPLUG, add CONFIG_NET
Kay Sievers [Wed, 6 Mar 2013 18:51:52 +0000 (19:51 +0100)]

7 years agoREADME: add kernel config options
Kay Sievers [Wed, 6 Mar 2013 18:36:39 +0000 (19:36 +0100)]
README: add kernel config options