From: Lennart Poettering Date: Thu, 26 Dec 2013 23:26:05 +0000 (+0100) Subject: bus: add some preliminary docs for porting existing dbus1 client libraries to kdbus X-Git-Tag: v209~624 X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=commitdiff_plain;h=0058679911db806b6db2fa445a1ce879a436c9d6;hp=81efa1da643326f13370dce52d8bf064c1226118 bus: add some preliminary docs for porting existing dbus1 client libraries to kdbus --- diff --git a/TODO b/TODO index e63463923..df578808c 100644 --- a/TODO +++ b/TODO @@ -124,6 +124,8 @@ Features: - NameLost/NameAcquired obsolete - GVariant - "const" properties (posted) + - port exit-on-idle logic to byebye ioctl + - make use of "drop" ioctl in pid 1 bus activation * sd-event - allow multiple signal handlers per signal? diff --git a/src/libsystemd-bus/DIFFERENCES b/src/libsystemd-bus/DIFFERENCES index 1c2bf99dd..d60ac1091 100644 --- a/src/libsystemd-bus/DIFFERENCES +++ b/src/libsystemd-bus/DIFFERENCES @@ -24,3 +24,5 @@ Known differences between dbus1 and kdbus: - NameOwnerChanged is a synthetic message, generated locally and not by the driver. + +- There's no standard per-session bus anymore. Only a per-user bus. diff --git a/src/libsystemd-bus/PORTING-DBUS1 b/src/libsystemd-bus/PORTING-DBUS1 new file mode 100644 index 000000000..0f0ab6e90 --- /dev/null +++ b/src/libsystemd-bus/PORTING-DBUS1 @@ -0,0 +1,538 @@ +A few hints on supporting kdbus as backend in your favourite D-Bus library. + +~~~ + +Before you read this, have a look at the DIFFERENCES and +GVARIANT_SERIALIZATION texts, you find in the same directory where you +found this. + +We invite you to port your favourite D-Bus protocol implementation +over to kdbus. However, there are a couple of complexities +involved. On kdbus we only speak GVariant marshalling, kdbus clients +ignore traffic in dbus1 marshalling. Thus, you need to add a second, +GVariant compatible marshaller to your libary first. + +After you have done that: here's the basic principle how kdbus works: + +You connect to a bus by opening its bus node in /dev/kdbus/. All +busses have a device node there, that starts with a numeric UID of the +owner of the bus, followed by a dash and a string identifying the +bus. The system bus is thus called /dev/kdbus/0-system, and for user +busses the device node is /dev/kdbus/1000-user (if 1000 is your user +id). + +(Before we proceed, please always keep a copy of libsystemd-bus next +to you, ultimately that's where the details are, this document simply +is a rough overview to help you grok things.) + +CONNECTING + +To connect to a bus, simply open() its device node, and issue the +KDBUS_CMD_HELLO call. That's it. Now you are connected. Do not send +Hello messages or so (as you would on dbus1), that does not exist for +kdbus. + +The structure you pass to the ioctl will contain a couple of +parameters that you need to know to operate on the bus. + +There are two flags fields, one indicating features of the kdbus +kernel side ("conn_flags"), the other one ("bus_flags") indicating +features of the bus owner (i.e. systemd). Both flags fields are 64bit +in width. + +When calling into the ioctl, you need to place your own supported +feature bits into these fields. This tells the kernel about the +features you support. When the ioctl returns it will contain the +features the kernel supports. + +If any of the higher 32bit are set on the two flags fields and your +client does not know what they mean, it must disconnect. The upper +32bit are used to indicate "incompatible" feature additions on the bus +system, the lower 32bit indicate "compatible" feature additions. A +client that does not support a "compatible" feature addition can go on +communicating with the bus, however a client that does not support an +"incompatible" feature must not proceed with the connection. + +The hello structure also contains another flags field "attach_flags" +which indicate meta data that is optionally attached to all incoming +messages. You probably want to set KDBUS_ATTACH_NAMES unconditionally +in it. This has the effect that all well-known names of a sender are +attached to all incoming messages. You need this information to +implement matches that match on a message sender name correctly. Of +course, you should only request attachment of as little metadata +fields as you need. + +The kernel will return in the "id" field your unique id. This is a +simple numeric value. For compatibility with classic dbus1 simply +format this as string and prefix ":0.". + +The kernel will also return the bloom filter size used for the signal +broadcast bloom filter (see below). + +The kernel will also return the bus ID of the bus in an 128bit field. + +The pool size field returned by the kernel indicates the size of the +memory mapped buffer. + +After the calling the hello ioctl, you should memory map the kdbus +fd. Use the pool size returned by the hello ioctl as map size. In this +memory mapped region the kernel will place all your incoming messages. + +SENDING MESSAGES + +Use the MSG_SEND ioctl to send a message to another peer. The ioctl +takes a structure that contains a variety of fields: + +The flags field corresponds closely to the old dbus1 message header +flags field, though the DONT_EXPECT_REPLY field got inverted into +EXPECT_REPLY. + +The dst_id/src_id field contains the unique id of the destination and +the sender. The sender field is overriden by the kernel usually, hence +you shouldn't fill it in. The destination field can also take the +special value KDBUS_DST_ID_BROADCAST for broadcast messages. For +messages intended to a well-known name set the field to +KDBUS_DST_ID_NAME, and attach the name in a special "items" entry to +the message (see below). + +The payload field indicates the payload. For all dbus traffic it +should carry the value 0x4442757344427573ULL. (Which encodes +'DBusDBus'). + +The cookie field corresponds with the "serial" field of classic +dbus1. We simply renamed it here (and extended it to 64bit) since we +didn't want to imply the monotonicity of the assignment the way the +word "serial" indicates it. + +When sending a message that expects a reply, you need to set the +EXPECT_REPLY flag in the message flag field. In this case you should +also fill out the "timeout_ns" value which indicates the timeout in +nsec for this call. If the peer does not respond in this time you will +get a notifcation of a timeout. Note that this is also used for +security purposes: a single reply messages is only allowed through the +bus as long as the timeout has not ended. With this timeout value you +hence "open a time window" in which the peer might respond to your +request and the policy allows the response to go through. + +When sending a message that is a reply, you need to fill in the +cookie_reply field, which is similar to the reply_serial field of +dbus1. Note that a message cannot have EXPECT_REPLY and a reply_serial +at the same time! + +This pretty much explains the ioctl header. The actual payload of the +data is now referenced in additional items that are attached to this +ioctl header structure at the end. When sending a message, you attach +items of the type PAYLOAD_VEC, PAYLOAD_MEMFD, FDS, BLOOM, DST_NAME to +it: + + KDBUS_ITEM_PAYLOAD_VEC: contains a pointer + length pair for + referencing arbitrary user memory. This is how you reference most + of your data. It's a lot like the good old iovec structure of glibc. + + KDBUS_ITEM_PAYLOAD_MEMFD: for large data blocks it is prefereable + to send prepared "memfds" (see below) over. This is item contains an + fd for a memfd plus a size. + + KDBUS_ITEM_PAYLOAD_FDS: for sending over fds attach an item of this + type with an array of fds. + + KDBUS_ITEM_BLOOM: the calculated bloom filter of this message, only + for undericted (broadcast) message. + + KDBUS_DST_NAME: for messages that are directed to a well-known name + (instead of a unique name), this item contains the well-known name + field. + +A single message may consists on no, one or more payload items of type +PAYLOAD_VEC or PAYLOAD_MEMFD. D-Bus protocol implementations should +treat them as a single block that just happens to be split up into +multiple items. Some restrictions apply however: + + The message header in its entirety must be contained in a single + PAYLOAD_VEC item + + You may only split your messsage up right in front of each GVariant + contained in the payload as well is immediately before framing of a + Gvariant, as well after as any padding bytes if there are any. The + padding bytes must be wholly contained in the preceding + PAYLOAD_VEC/PAYLOAD_MEMFD item. You may not split up simple types + nor arrays of trivial types. The latter is necessary to allow APIs + to return direct pointers to linear chunks of fixed size trivial + arrays. Examples: The simple types "u", "s", "t" have to be in the + same payload item. The array of simple types "ay", "ai" have to be + fully in contained in the same payload item. For an array "as" or + "a(si)" the only restriction however is to keep each string + individually in an uninterrupted item, to keep the framing of each + element and the array in a single uninterrupted item, however the + various strings might end up in different items. + +Note again that splitting up messages into seperate items is up to the +implementation. Also note that the kdbus kernel side might merge +seperate items if it deems this to be useful. However, the order in +which items are contained in the message is left untouched. + +PAYLOAD_MEMFD items allow zero-copy data transfer (see below regarding +the memfd concept). Note however that the overhead of mapping these +makes them relatively expensive, and only worth the trouble for memory +blocks > 128K (this value appears to be quite universal across +architectures, as we tested). Thus we recommend sending PAYLOAD_VEC +items over for small messages and restore to PAYLOAD_MEMFD items for +messages > 128K. Since while building up the message you might not +know yet whether it will grow beyond this boundary a good approach is +to simply build the message unconditionally in a memfd +object. However, when the message is sealed to be sent away check for +the size limit. If the size of the message is < 128K, then simply send +the data as PAYLOAD_VEC and reuse the memfd. If it is >= 128K, seal +the memfd and send it as PAYLOAD_MEMFD, and allocate a new memfd for +the next message. + +RECEIVING MESSAGES + +Use the MSG_RECV ioctl to read a message from kdbus. This will return +an offset into the pool memory map, relative to its beginning. + +The received message structure more or less follows the structure of +the message originally sent. However, certain changes have been +made. In the header the src_id field will be filled in. + +The payload items might have gotten merged and PAYLOAD_VEC items are +not used. Instead you will only find PAYLOAD_OFF and PAYLOAD_MEMFD +items. The former contain an offset and size into your memory mapped +pool where you find the payload. + +If during the HELLO ioctl you asked for getting meta data attached to +your message you will find additional KDBUS_ITEM_CREDS, +KDBUS_ITEM_PID_COMM, KDBUS_ITEM_TID_COMM, KDBUS_ITEM_TIMESTAMP, +KDBUS_ITEM_EXE, KDBUS_ITEM_CMDLINE, KDBUS_ITEM_CGROUP, +KDBUS_ITEM_CAPS, KDBUS_ITEM_SECLABEL, KDBUS_ITEM_AUDIT items that +contain this metadata. This metadata will be for the sender at the +point in time it sent the message. This information is hence uncached, +and since it is appended by the kernel trustable. The +KDBUS_ITEM_SECLABEL item usually contains the SELinux security label +if it is used. + +After processing the message you need to call the KDBUS_CMD_FREE +ioctl, which releases the message from the pool, and allows the kernel +to store another message there. Note that the memory used by the pool +is normal anonymous, swappable memory that is backed by tmpfs. Hence +there is no need to copy the message out of it quickly, instead you +can just leave it there as long as you need it and release it via the +FREE ioctl only after that's done. + +BLOOM FILTERS + +The kernel does not understand dbus marshalling, it will not look into +the message payload. To allow clients to subscribe to specific subsets +of the broadcast matches we emply bloom filters. + +When broadcasting messages a bloom filter needs to be attached to the +message in a KDBUS_ITEM_BLOOM item (and only for broadcasting +messages!). If you don't know what bloom filters are, read up now on +Wikipedia. In short: they are a very efficient way how to +probabilistically check whether a certain word is contained in a +vocabulary. It knows no false negatives, but it does know false +positives. + +The bloom filter that needs to be included has the parameters m=512 +(bits in the filter), k=8 (nr of hash functions). The underlying hash +function is SipHash-2-4. We calculate two hash values for an input +strings, one with the hash key b9660bf0467047c18875c49c54b9bd15 (this +is supposed to be read as a series of 16 hexadecimially formatted +bytes), and one with the hash key +aaa154a2e0714b39bfe1dd2e9fc54a3b. This results in two 64bit hash +values, A and B. The 8 hash functions for the bloom filter require a 9 +bit output each (since m=512=2^9), to generate these we XOR combine +the first 8 bit of A shifted to the left by 1, with the first 8 bit of +B. Then, for the next hash function we use the second 8 bit pair, and +so on. + +For each message to send across the bus we populate the bloom filter +with all possible matchable strings. If a client then wants to +subscribe to messages of this type it simply tells the kernel to test +its own calculated bit mask against the bloom filter of each message. + +More specifically the following strings are added to the bloom filter +of each message that is broadcast: + + The string "interface:" suffixed by the interface name + + The string "member:" suffixed by the member name + + The string "path:" suffixed by the path name + + The string "path-slash-prefix:" suffixed with the path name, and + also all prefixes of the path name (cut off at "/"), also prefixed + with "path-slash-prefix". + + The string "message-type:" suffixed with the strings "signal", + "method_call", "error" or "method_return" for the respective message + type of the message. + + If the first argument of the message is a string, "arg0:" suffixed + with the first argument. + + If the first argument of the message is a string, "arg0-dot-prefix" + suffixed with the first argument, and also all prefixes of the + argument (cut off at "."), also prefixed with "arg0-dot-prefix". + + If the first argument of the message is a string, + "arg0-slash-prefix" suffixed with the first argument, and also all + prefixes of the argument (cut off at "/"), also prefixed with + "arg0-slash-prefix". + + Similar for all further arguments that are strings up to 63, for the + arguments and their "dot" and "slash" prefixes. On the first + argument that is not a string addition to the bloom filter should be + stopped however. + +(Note that the bloom filter does not container sender nor receiver +names!) + +When a client wants to subscribe to messages matching a certain +expression it should calculate the bloom mask following the same +algorithm. The kernel will then simply test the mask againt the +attached bloom filters. + +Note that bloom filters are probabilistic, which means that clients +might get messages they did not expect. You bus protocol +implementation must be capable of dealing with these unexpected +messages (which it needs to anyway, given that transfers are +relatively unrestricted on kdbus and people can send you all kinds of +non-sense.). + +INSTALLING MATCHES + +To install matches for broadcast messages use the KDBUS_CMD_ADD_MATCH +ioctl. It takes a structure that contains an encoded match expression, +and that is followed by one or more items, which are combined in an +AND way. (Meaning: a messages is matched exactly when all items +attached to the original ioctl struct match). + +To match against other user messages add a KDBUS_ITEM_BLOOM item in +the match (see above). Note that the bloom filter does not include +matches to the sender names. To additionally check against sender +names, use the KDBUS_ITEM_ID (for unique id matches) and +KDBUS_ITEM_NAME (for well-known name matches) item types. + +To match against kernel generated messages (see below) you should add +items of the same type as the kernel messages include, +i.e. KDBUS_ITEM_NAME_ADD, KDBUS_ITEM_NAME_REMOVE, +KDBUS_ITEM_NAME_CHANGE, KDBUS_ITEM_ID_ADD, KDBUS_ITEM_ID_REMOVE and +fill them out. Note however, that you have some wildcards in this +case, for example the .id field of KDBUS_ITEM_ADD/KDBUS_ITEM_REMOVE +structures may be set to 0 to match against any id addition/removal. + +Note that dbus match strings do no map 1:1 to these ioctl() calls. In +many cases (where the match string is "underspecified") you might need +to issue up to six different ioctl() calls for the same match. For +example, the empty match (which matches against all messages), would +translate into one KDBUS_ITEM_BLOOM ioctl, one KDBUS_ITEM_NAME_ADD, +one KDBUS_ITEM_NAME_CHANGE, one KDBUS_ITEM_NAME_REMOVE, one +KDBUS_ITEM_ID_ADD and one KDBUS_ITEM_ID_REMOVE. + +When creating a match you may attach a "cookie" value to them, which +is used for deleting a match again. The cookie can be selected freely +be the client. When issuing KDBUS_CMD_REMOVE_MATCH simply pass the +same cookie as before and all matches matching the same "cookie" value +will be removed. This is particulary handy for the case where multiple +ioctl()s are added for a single match strings. + +MEMFDS + +The "memfd" concept is used for zero-copy data transfers (see +above). memfds are file descriptors to memory chunks of arbitrary +sizes. If you have a memfd you can mmap() it to get access to the data +it contains or write to it. They are comparable to file descriptors to +unlinked files on a tmpfs, or to anonymous memory that one may refer +to with an fd. They have one particular property: they can be +"sealed". A memfd that is "sealed" is protected from alteration. Only +memfds that are currently not mapped and to which a single fd refers +may be sealed (they may also be unsealed in that case). + +The concept of "sealing" makes memfds useful for using them as +transport for kdbus messages: only when the receiver knows that the +message it received cannot change while looking at it can safely parse +it without having to copy it to a safe memory error. memfds can also +be reused in multiple messages. A sender may send the same memfd to +multiple peers, and since it is sealed in can rely that the received +will not be able to modify it. "Sealing" hence provides both sides of +a transactiom with the guarantee that the data stays constant and is +reusable. + +memfds are a generic concept that can be used outside of the immediate +kdbus usecase. You can send them across AF_UNIX sockets too, sealed or +unsealed. In kdbus themselves they can be used to send zero-copy +payloads, but may also be sent as normal fds. + +memfds are allocated KDBUS_CMD_MEMFD_NEW ioctl. After allocation +simply memory map them and write to them. To set their size use +KDBUS_CMD_MEMFD_SIZE_SET. Note that memfds will ne increased in size +automatically if you touch previously unallocated pages. However, the +size will only be increased in multiples of the page size in that +case. Thus, in almost all cases, an explicitl KDBUS_CMD_MEMFD_SIZE_SET +is necessary, since it allows setting memfd sizes in finer +granularity. To seal a memfd use the KDBUS_CMD_MEMFD_SEAL_SET ioctl +call. It will only succeeds if the caller has the only fd reference to +the memfd open, and if the memfd is currently unmapped. + +memfds may be sent across kdbus via KDBUS_ITEM_PAYLOAD_MEMFD items +attached to messages. If this is done the data included in the memfd +is considered part of the payload stream of a message, and are treated +the same way as KDBUS_ITEM_PAYLOAD_VEC by the receiving side. It is +possible to interleave KDBUS_ITEM_PAYLOAD_MEMFD and +KDBUS_ITEM_PAYLOAD_VEC items freely, by the reader they will be +considered a single stream of bytes in the order these items appear in +the message, that just happens to be split up at various places +(regarding rules how they may be split up, see above). The kernel will +refuse taking KDBUS_ITEM_PAYLOAD_MEMFD items that refer to memfds that +are not sealed. + +Note that sealed memfds may be unsealed again if they are not mapped +you have the only fd reference to them. + +Alternatively to sending memfds as KDBUS_ITEM_PAYLOAD_MEMFD items +(where they just form part of the payload stream of a message) you can +also simply attach their fds to a message using +KDBUS_ITEM_PAYLOAD_FDS. In this case the memfd contents is not +considered part of the payload stream of the message, but simply fds +like any other that happen to be attached to the message. + +MESSAGES FROM THE KERNEL + +A couple of messages previousl generated by the dbus1 bus driver are +now generated by the kernel. Since the kernel does not understand the +payload marshalling they are shipped in a different format +though. This is indicated with a the "payload type" field of the +messages set to 0. Library implementations should take these messages +and synthesize traditional driver messages for them on reception. + +More specifically: + + Instead of the NameOwnerChanged, NameLost, NameAcquired signals + there are kernel messages containing KDBUS_ITEM_NAME_ADD, + KDBUS_ITEM_NAME_REMOVE, KDBUS_ITEM_NAME_CHANGE, KDBUS_ITEM_ID_ADD, + KDBUS_ITEM_ID_REMOVE items are generated (each message will contain + exactly one of these items). Note that in In libsystemd-bus we have + obsoleted NameLost/NameAcquired messages, since they are entirely + redundant to NameOwnerChanged. This library will hence only + synthesize NameOwnerChanged messages from these kernel messages, + and never generate NameLost/NameAcquired. If you library needs to + stay compatible to the old dbus1 userspace, you possibly might need + to synthesize both a NameOwnerChanged and NameLost/NameAcquired + message from the same kernel message. + + When a method call times out KDBUS_ITEM_REPLY_TIMEOUT message is + generated. This should be synthesized into a method error reply + message to the original call. + + When a method call fails because the peer terminated the connection + before responding a KDBUS_ITEM_REPLY_DEAD message is + generated. Simiarl, it should be synthesized into a method error + reply message. + +For synthesized messages we recommend setting the cookie field to +(uint32_t) -1 (and not (uint64_t) -1!), so that the cookie is not 0 +(which the dbus1 spec does not allow), but clearly recognizable as +synthetic. + +Note that the KDBUS_ITEM_NAME_XYZ messages will actually inform you +about all kinds of names, including activatable ones. Classic dbus1 +NameOwnerChanged messages OTOH are only generated when a name is +really acquired on the bus and not just simply activatable. This means +you must explictly check for the case where an activatable name +becomes acquired or an acquired name is lost and returns to be +activatable. + +NAME REGISTRY + +To acquire names on the bus use the KDBUS_CMD_NAME_ACQUIRE ioctl(). It +takes a flags field similar to dbus1's RequestName() bus driver call, +however the NO_QUEUE flag got inverted into a QUEUE flag instead. + +To release a previousl acquired name use the KDBUS_CMD_NAME_RELEASE +ioctl(). + +To list acquired names use the KDBUS_CMD_CONN_INFO ioctl. It may be +used to list unique names, well known names as well as activatable +names and clients currently queueing for ownership of a well-known +name. The ioctl will return an offset into the memory pool. After +reading all the data you need you need to release this via the +KDBUS_CMD_FREE ioctl(), similar how you release a received message. + +Note that the kernel does not know anything about properly formatted +dbus bus names. It is hence essential that you verify the validity of +all bus names returned by the kernel (for example in message meta data +or when listing acquired names), and ignore invalid entries. + +CREDENTIALS + +kdbus can optionally attach all kinds of metadata about the sender at +the point of time of sending ("credentials") to messages, on request +of the receiver. This is both supported on directed and undirected +(broadcast) messages. The metadata to attach is selected at time of +the HELLO ioctl of the receiver via a flags field (see above). Note +that clients must be able to handle that messages contain more +metadata than they asked for themselves, to simplify implementation of +broadcasting in the kernel. The receiver should not rely on this data +to be around though, even though it will be correct if it happens to +be attached. In order to avoid programming errors in application we'd +recommend though not to pass this data on to clients that did not +explicitly ask for it. + +Credentials may also be queried for a well-known or unique name. Use +the KDBUS_CMD_CONN_INFO for this. It will return an offset to the pool +area again, which will contain the same credential items as messages +have attached. Note that when issuing the ioctl you can select a +different set of credentials to gather than was originally requested +for being attached to incoming messages. + +Credentials are always specific to the sender namespace that was +current at the time of sending, and of the proceess that opened the +bus connection at the time of opening it. Note that this latter data +is cached! + +POLICY + +The kernel enforces only very limited policy on names. It will not do +access filtering by userspace payload, and thus not by interface or +method name. + +This ultimately means that most finegrained policy enforcement needs +to be done by the receiving process. We recommend using PolicyKit for +any more complex checks. However, libraries should make simple static +policy decisions regarding privileged/unprivileged method calls +easy. We recommend doing this by enabling KDBUS_ATTACH_CAPS and +KDBUS_ATTACH_CREDS for incoming messages, and then discerning client +access by some capability of if sender and receiver UIDs match. + +BUS ADDRESSES + +When connecting to kdbus use the "kernel:" protocol prefix in DBus +address strings. The device node path is encoded in its "path=" +parameter. + +Client libraries should use the following connection string when +connecting to the system bus: + + kernel:path=/dev/kdbus/0-system/bus;unix:path=/run/dbus/system_bus_socket + +This will ensure that kdbus is preferred over the legacy AF_UNIX +socket, but compatibility is kept. For the user bus use: + + kernel:path=/dev/kdbus/$UID-system/bus;unix:path=$XDG_RUNTIME_DIR/bus + +With $UID replaced by the callers numer user ID, and $XDG_RUNTIME_DIR +following the XDG basedir spec. + +Of course the $DBUS_SYSTEM_BUS_ADDRESS and $DBUS_SESSION_BUS_ADDRESS +variables should still take precedence. + +DISCLAIMER + +This all is just the status quo. We are putting this together, because +we are quite confident that further API changes will be smaller, but +to make this very clear: this is all subject to change, still! + +We invite you to port over your favourite dbus library to this new +scheme, but please be prepared to make minor changes when we still +change these interfaces!