X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=shell-completion%2Fzsh%2F_systemd;h=78cb0611813794fcbf11da5dc7d6feba8a3d0099;hp=1ab1311ec149b0ffc4333ca608f712c95acd27f9;hb=a06225fcc168cc3e62edc7efcb42d94cf68f159a;hpb=4f87c47b35cf9c1f58872559ae67a2656712fdd6 diff --git a/shell-completion/zsh/_systemd b/shell-completion/zsh/_systemd index 1ab1311ec..78cb06118 100644 --- a/shell-completion/zsh/_systemd +++ b/shell-completion/zsh/_systemd @@ -1,142 +1,9 @@ -#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl +#compdef systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent machinectl _ctls() { local curcontext="$curcontext" state lstate line case "$service" in - systemctl) - # -s for aggregated options like -aP - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \ - \*{-p,--property=}'[Show only properties by specific name]:unit property' \ - {-a,--all}'[Show all units/properties, including dead/empty ones]' \ - '--reverse[Show reverse dependencies]' \ - '--after[Show units ordered after]' \ - '--before[Show units ordered before]' \ - '--failed[Show only failed units]' \ - {-l,--full}"[Don't ellipsize unit names on output]" \ - '--fail[When queueing a new job, fail if conflicting jobs are pending]' \ - '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - {-q,--quiet}'[Suppress output]' \ - '--no-block[Do not wait until operation finished]' \ - "--no-wall[Don't send wall message before halt/power-off/reboot]" \ - "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \ - '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not ask for system passwords]' \ - '--system[Connect to system manager]' \ - '--user[Connect to user service manager]' \ - '--global[Enable/disable unit files globally]' \ - {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \ - '--root=[Enable unit files in the specified root directory]:directory:_directories' \ - '--runtime[Enable unit files only temporarily until next reboot]' \ - {-n,--lines=}'[Journal entries to show]:number of entries' \ - {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \ - '*::systemctl command:_systemctl_command' - ;; - loginctl) - _arguments -s \ - {-h,--help}'[Show help]' \ - '--version[Show package version]' \ - \*{-p,--property=}'[Show only properties by this name]:unit property' \ - {-a,--all}'[Show all properties, including empty ones]' \ - '--kill-who=[Who to send signal to]:killwho:(main control all)' \ - {-s,--signal=}'[Which signal to send]:signal:_signals' \ - '--no-ask-password[Do not ask for system passwords]' \ - {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \ - {-P,--privileged}'[Acquire privileges before execution]' \ - '--no-pager[Do not pipe output into a pager]' \ - '*::loginctl command:_loginctl_command' - ;; - - hostnamectl) - _arguments -s \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--transient[Only set transient hostname]' \ - '--static[Only set static hostname]' \ - '--pretty[Only set pretty hostname]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::hostnamectl commands:_hostnamectl_command' - ;; - journalctl) - _arguments -s \ - '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ - '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \ - {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \ - '--system[Show system and kernel messages]' \ - '--user[Show messages from user services]' \ - {-b,--this-boot}'[Show data only from current boot]' \ - {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \ - '--user-unit[Show data only from the specified user session unit]:units:_journal_fields _SYSTEMD_USER_UNIT' \ - {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \ - {-f,--follow}'[Follow journal]' \ - {-n,--lines=}'[Number of journal entries to show]:integer' \ - '--no-tail[Show all lines, even in follow mode]' \ - {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \ - {-l,--full}'[Show long fields in full]' \ - {-a,--all}'[Show all fields, including long and unprintable]' \ - {-q,--quiet}"[Don't show privilege warning]" \ - '--no-pager[Do not pipe output into a pager]' \ - {-m,--merge}'[Show entries from all available journals]' \ - {-D,--directory=}'[Show journal files from directory]:directories:_directories' \ - '--interval=[Time interval for changing the FSS sealing key]:time interval' \ - '--verify-key=[Specify FSS verification key]:FSS key' \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--new-id128[Generate a new 128 Bit ID]' \ - '--header[Show journal header information]' \ - '--disk-usage[Show total disk usage]' \ - {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \ - '--setup-keys[Generate new FSS key pair]' \ - '--verify[Verify journal file consistency]' \ - '--list-catalog[List messages in catalog]' \ - '--update-catalog[Update binary catalog database]' \ - '*::default: _journal_none' - ;; - localectl) - _arguments \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - "--no-convert[Don't convert keyboard mappings]" \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::localectl commands:_localectl_command' - ;; - systemd-coredumpctl) - _arguments \ - {-o,--output=}'[Write output to FILE]:output file:_files' \ - '--no-pager[Do not pipe output into a pager]' \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '*::systemd-coredumpctl commands:_systemd-coredumpctl_command' - - ;; - timedatectl) - _arguments -s \ - {-h,--help}'[Show this help]' \ - '--version[Show package version]' \ - '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \ - '--no-pager[Do not pipe output into a pager]' \ - '--no-ask-password[Do not prompt for password]' \ - {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \ - '*::timedatectl commands:_timedatectl_command' - ;; - udevadm) - _arguments \ - '--debug[Print debug messages to stderr]' \ - '--version[Print version number]' \ - '--help[Print help text]' \ - '*::udevadm commands:_udevadm_command' - ;; systemd-analyze) _arguments \ {-h,--help}'[Show help text.]' \ @@ -341,597 +208,6 @@ _outputmodes() { _describe -t output 'output mode' _output_opts || compadd "$@" } - -(( $+functions[_systemctl_command] )) || _systemctl_command() -{ - local -a _systemctl_cmds - _systemctl_cmds=( - "list-units:List units" - "start:Start (activate) one or more units" - "stop:Stop (deactivate) one or more units" - "reload:Reload one or more units" - "restart:Start or restart one or more units" - "condrestart:Restart one or more units if active" - "try-restart:Restart one or more units if active" - "reload-or-restart:Reload one or more units if possible, otherwise start or restart" - "force-reload:Reload one or more units if possible, otherwise restart if active" - "hibernate:Hibernate the system" - "hybrid-sleep:Hibernate and suspend the system" - "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active" - "isolate:Start one unit and stop all others" - "kill:Send signal to processes of a unit" - "is-active:Check whether units are active" - "is-failed:Check whether units are failed" - "status:Show runtime status of one or more units" - "show:Show properties of one or more units/jobs or the manager" - "reset-failed:Reset failed state for all, one, or more units" - "load:Load one or more units" - "list-unit-files:List installed unit files" - "enable:Enable one or more unit files" - "disable:Disable one or more unit files" - "reenable:Reenable one or more unit files" - "preset:Enable/disable one or more unit files based on preset configuration" - "help:Show documentation for specified units" - "list-dependencies:Show unit dependency tree" - "mask:Mask one or more units" - "unmask:Unmask one or more units" - "link:Link one or more units files into the search path" - "is-enabled:Check whether unit files are enabled" - "list-jobs:List jobs" - "cancel:Cancel all, one, or more jobs" - "dump:Dump server status" - "snapshot:Create a snapshot" - "delete:Remove one or more snapshots" - "show-environment:Dump environment" - "set-environment:Set one or more environment variables" - "unset-environment:Unset one or more environment variables" - "daemon-reload:Reload systemd manager configuration" - "daemon-reexec:Reexecute systemd manager" - "default:Enter system default mode" - "rescue:Enter system rescue mode" - "emergency:Enter system emergency mode" - "halt:Shut down and halt the system" - "suspend:Suspend the system" - "poweroff:Shut down and power-off the system" - "reboot:Shut down and reboot the system" - "kexec:Shut down and reboot the system with kexec" - "exit:Ask for user instance termination" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@" - else - local curcontext="$curcontext" - - cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}" - # Deal with any aliases - case $cmd in - condrestart) cmd="try-restart";; - force-reload) cmd="reload-or-try-restart";; - esac - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:systemctl-${cmd}:" - - local update_policy - zstyle -s ":completion:${curcontext}:" cache-policy update_policy - if [[ -z "$update_policy" ]]; then - zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy - fi - - _call_function ret _systemctl_$cmd || _message 'no more arguments' - else - _message "unknown systemctl command: $words[1]" - fi - return ret - fi -} - -__systemctl() -{ - local -a _modes - _modes=("--user" "--system") - systemctl ${words:*_modes} --full --no-legend --no-pager "$@" -} - - -# Fills the unit list -_systemctl_all_units() -{ - if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) && - ! _retrieve_cache SYS_ALL_UNITS; - then - _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) ) - _store_cache SYS_ALL_UNITS _sys_all_units - fi -} - -# Fills the unit list including all file units -_systemctl_really_all_units() -{ - local -a all_unit_files; - local -a really_all_units; - if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) && - ! _retrieve_cache SYS_REALLY_ALL_UNITS; - then - all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) ) - _systemctl_all_units - really_all_units=($_sys_all_units $all_unit_files) - _sys_really_all_units=(${(u)really_all_units}) - _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units - fi -} - -_filter_units_by_property() { - local property=$1 value=$2 ; shift ; shift - local -a units ; units=($*) - local prop unit - for ((i=1; $i <= ${#units[*]}; i++)); do - # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for - # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to - # revert to calling 'systemctl show' once for all units, which is way - # faster - unit=${units[i]} - prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"} - if [[ "${prop}" = "$property=$value" ]]; then - echo " ${unit}" - fi - done -} - -_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )} -_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" || $c == "failed" ]] && echo " $a"; done; }) )} -_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo " $a"; done; }) )} -_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo " $a"; done; }) )} -_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo " $a"; done; }) )} -_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo " $a"; done; }) )} - -# Completion functions for ALL_UNITS -for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_really_all_units - compadd "$@" -a - _sys_really_all_units - } -done - -# Completion functions for ENABLED_UNITS -for fun in disable reenable ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_enabled_units - _systemctl_disabled_units - compadd "$@" -a - _sys_enabled_units _sys_disabled_units - } -done - -# Completion functions for DISABLED_UNITS -(( $+functions[_systemctl_enable] )) || _systemctl_enable() -{ - _systemctl_disabled_units - compadd "$@" -a - _sys_disabled_units -} - -# Completion functions for FAILED_UNITS -(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed() -{ - _systemctl_failed_units - compadd "$@" -a - _sys_failed_units || _message "no failed unit found" -} - -# Completion functions for STARTABLE_UNITS -(( $+functions[_systemctl_start] )) || _systemctl_start() -{ - _systemctl_inactive_units - compadd "$@" -a - _sys_inactive_units -} - -# Completion functions for STOPPABLE_UNITS -for fun in stop kill try-restart condrestart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanStop yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for ISOLATABLE_UNITS -(( $+functions[_systemctl_isolate] )) || _systemctl_isolate() -{ - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property AllowIsolate yes \ - ${_sys_all_units[*]} ) -} - -# Completion functions for RELOADABLE_UNITS -for fun in reload reload-or-try-restart force-reload ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_active_units - compadd "$@" - $( _filter_units_by_property CanReload yes \ - ${_sys_active_units[*]} ) - } -done - -# Completion functions for RESTARTABLE_UNITS -for fun in restart reload-or-restart ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - _systemctl_all_units - compadd "$@" - $( _filter_units_by_property CanStart yes \ - ${_sys_all_units[*]} | while read line; do \ - [[ "$line" =~ \.device$ ]] || echo " $line"; \ - done ) - } -done - -# Completion functions for MASKED_UNITS -(( $+functions[_systemctl_unmask] )) || _systemctl_unmask() -{ - _systemctl_masked_units - compadd "$@" -a - _sys_masked_units || _message "no masked unit found" -} - -# Completion functions for JOBS -(( $+functions[_systemctl_cancel] )) || _systemctl_cancel() -{ - compadd "$@" - $(__systemctl list-jobs \ - | cut -d' ' -f1 2>/dev/null ) || _message "no job found" -} - -# Completion functions for SNAPSHOTS -(( $+functions[_systemctl_delete] )) || _systemctl_delete() -{ - compadd "$@" - $(__systemctl list-units --type snapshot --all \ - | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found" -} - -# Completion functions for ENVS -for fun in set-environment unset-environment ; do - (( $+functions[_systemctl_$fun] )) || _systemctl_$fun() - { - local fun=$0 ; fun=${fun##_systemctl_} - local suf - if [[ "${fun}" = "set-environment" ]]; then - suf='-S=' - fi - - compadd "$@" ${suf} - $(systemctl show-environment \ - | while read line; do echo " ${line%%\=}";done ) - } -done - -(( $+functions[_systemctl_link] )) || _systemctl_link() { _files } - -# no systemctl completion for: -# [STANDALONE]='daemon-reexec daemon-reload default dump -# emergency exit halt kexec list-jobs list-units -# list-unit-files poweroff reboot rescue show-environment' -# [NAME]='snapshot load' - -_systemctl_caching_policy() -{ - local _sysunits - local -a oldcache - - # rebuild if cache is more than a day old - oldcache=( "$1"(mh+1) ) - (( $#oldcache )) && return 0 - - _sysunits=($(__systemctl --all | cut -d' ' -f1)) - - if (( $#_sysunits )); then - for unit in $_sysunits; do - [[ "$unit" -nt "$1" ]] && return 0 - done - fi - - return 1 -} - -_list_fields() { - local -a journal_fields - journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC} - ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID} - _{P,U,G}ID _COMM _EXE _CMDLINE - _AUDIT_{SESSION,LOGINUID} - _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID} - _SYSTEMD_USER_UNIT - _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP - _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT - _KERNEL_{DEVICE,SUBSYSTEM} - _UDEV_{SYSNAME,DEVNODE,DEVLINK} - __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP) - _describe 'possible fields' journal_fields -} - -_journal_none() { - local -a _commands _files - _commands=( ${(f)"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} ) - _alternative : \ - 'files:/dev files:_files -W /dev -P /dev/' \ - "commands:commands:($_commands[@])" \ - 'fields:fields:_list_fields' -} - -_journal_fields() { - local -a _fields cmd - cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" ) - _fields=( ${(f)"$(_call_program fields $cmd[@])"} ) - typeset -U _fields - _describe 'possible values' _fields -} - - -_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo " $a"; done; }) )} -_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo " $a"; done; }) )} -_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo " $a"; done; }) )} - -# Completion functions for SESSIONS -for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { - _loginctl_all_sessions - compadd "$@" -a - _sys_all_sessions - } -done - -# Completion functions for USERS -for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { - _loginctl_all_users - compadd "$@" -a - _sys_all_users - } -done - -# Completion functions for SEATS -(( $+functions[_loginctl_seats] )) || _loginctl_seats() -{ - _loginctl_all_seats - compadd "$@" -a - _sys_all_seats -} -for fun in seat-status show-seat terminate-seat ; do - (( $+functions[_loginctl_$fun] )) || _loginctl_$fun() - { _loginctl_seats } -done - -# Completion functions for ATTACH -(( $+functions[_loginctl_attach] )) || _loginctl_attach() -{ - _loginctl_all_seats - - _arguments -w -C -S -s \ - ':seat:_loginctl_seats' \ - '*:device:_files' -} - -# no loginctl completion for: -# [STANDALONE]='list-sessions list-users list-seats flush-devices' - -(( $+functions[_loginctl_command] )) || _loginctl_command() -{ - local -a _loginctl_cmds - _loginctl_cmds=( - "list-sessions:List sessions" - "session-status:Show session status" - "show-session:Show properties of one or more sessions" - "activate:Activate a session" - "lock-session:Screen lock one or more sessions" - "unlock-session:Screen unlock one or more sessions" - "terminate-session:Terminate one or more sessions" - "kill-session:Send signal to processes of a session" - "list-users:List users" - "user-status:Show user status" - "show-user:Show properties of one or more users" - "enable-linger:Enable linger state of one or more users" - "disable-linger:Disable linger state of one or more users" - "terminate-user:Terminate all sessions of one or more users" - "kill-user:Send signal to processes of a user" - "list-seats:List seats" - "seat-status:Show seat status" - "show-seat:Show properties of one or more seats" - "attach:Attach one or more devices to a seat" - "flush-devices:Flush all device associations" - "terminate-seat:Terminate all sessions on one or more seats" - ) - - if (( CURRENT == 1 )); then - _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@" - else - local curcontext="$curcontext" - - cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}" - - if (( $#cmd )); then - curcontext="${curcontext%:*:*}:loginctl-${cmd}:" - - _call_function ret _loginctl_$cmd || _message 'no more arguments' - else - _message "unknown loginctl command: $words[1]" - fi - return ret - fi -} - -_hostnamectl_command() { - local -a _hostnamectl_cmds - _hostnamectl_cmds=( - "status:Show current hostname settings" - "set-hostname:Set system hostname" - "set-icon-name:Set icon name for host" - ) - if (( CURRENT == 1 )); then - _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@" - else - local curcontext="$curcontext" - cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - [[ $cmd == status ]] && msg="no options" || msg="options for $cmd" - _message "$msg" - else - _message "unknown hostnamectl command: $words[1]" - fi - fi -} - -_localectl_set-locale() { - local -a _confs _locales - local expl suf - _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} ) - _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} ) - if [[ -prefix 1 *\= ]]; then - local conf=${PREFIX%%\=*} - compset -P1 '*=' - _wanted locales expl "locales configs" \ - _combination localeconfs confs=$conf locales "$@" - - else - compadd -S '=' $_confs - fi -} - -_localectl_set-keymap() { - local -a _keymaps - _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} ) - if (( CURRENT <= 3 )); then - _describe keymaps _keymaps - else - _message "no more options" - fi -} - -_localectl_set-x11-keymap() { - if (( $+commands[pkg-config] )); then - local -a _file _layout _model _variant _options - local _xorg_lst - _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"} - _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} ) - _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} ) - _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} ) - _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} ) - _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} ) - #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} ) - #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} ) - #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} ) - #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} ) - - case $CURRENT in - 2) _describe layouts _layout ;; - 3) _describe models _model;; - 4) _describe variants _variant;; - 5) _describe options _options;; - *) _message "no more options" - esac - fi -} - - -_localectl_command() { - local -a _localectl_cmds - _localectl_cmds=( - 'status:Show current locale settings' - 'set-locale:Set system locale' - 'list-locales:Show known locales' - 'set-keymap:Set virtual console keyboard mapping' - 'list-keymaps:Show known virtual console keyboard mappings' - 'set-x11-keymap:Set X11 keyboard mapping' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'localectl command' _localectl_cmds - else - local curcontext="$curcontext" - cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $+functions[_localectl_$cmd] )); then - _localectl_$cmd - else - _message "no more options" - fi - fi -} - -_timedatectl_set-timezone(){ - local -a _timezones - _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} ) - compadd "$_timezones[@]" -} - -_timedatectl_set-time(){ - _message "YYYY-MM-DD HH:MM:SS" -} - -_timedatectl_set-local-rtc(){ - local -a _options - _options=( - '0:Maintain RTC in universal time' - '1:Maintain RTC in local time' - ) - _describe options _options -} - -_timedatectl_set-ntp(){ - local -a _options - _options=( - '0:Disable NTP based network time configuration' - '1:Enable NTP based network time configuration' - ) - _describe options _options -} - -_timedatectl_command(){ - local -a _timedatectl_cmds - _timedatectl_cmds=( - 'status:Show current time settings' - 'set-time:Set system time' - 'set-timezone:Set system timezone' - 'list-timezones:Show known timezones' - 'set-local-rtc:Control whether RTC is in local time' - 'set-ntp:Control whether NTP is enabled' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'timedatectl command' _timedatectl_cmds - else - local curcontext="$curcontext" - cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - if (( $+functions[_timedatectl_$cmd] )); then - _timedatectl_$cmd - else - _message "no more options" - fi - else - _message "unknown timedatectl command: $words[1]" - fi - fi -} -_systemd-coredumpctl_command(){ - local -a _systemd_coredumpctl_cmds - _systemd_coredumpctl_cmds=( - 'list:List available coredumps' - 'dump:Print coredump to std' - ) - if (( CURRENT == 1 )); then - _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds - else - local curcontext="$curcontext" - local -a _dumps - cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}" - if (( $#cmd )); then - # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid - _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" ) - if [[ -n "$_dumps" ]]; then - _describe -t pids 'coredumps' _dumps - else - _message "no coredumps" - fi - else - _message "no more options" - fi - - fi - -} - (( $+functions[_machinectl_command] )) || _machinectl_command() { local -a _machinectl_cmds @@ -964,139 +240,6 @@ _systemd-coredumpctl_command(){ fi } -_udevadm_info(){ - _arguments \ - '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \ - '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \ - '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \ - '--root[Print absolute paths in name or symlink query.]' \ - '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \ - '--export[Print output as key/value pairs.]' \ - '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \ - '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \ - '--export-db[Export the content of the udev database.]' \ - '--cleanup-db[Cleanup the udev database.]' -} - -_udevadm_trigger(){ - _arguments \ - '--verbose[Print the list of devices which will be triggered.]' \ - '--dry-run[Do not actually trigger the event.]' \ - '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \ - '--action=[Type of event to be triggered.]:actions:(add change remove)' \ - '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \ - '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \ - '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \ - '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \ - '--property-match=[Trigger events for devices with a matching property value.]' \ - '--tag-match=property[Trigger events for devices with a matching tag.]' \ - '--sysname-match=[Trigger events for devices with a matching sys device name.]' \ - '--parent-match=[Trigger events for all children of a given device.]' -} - -_udevadm_settle(){ - _arguments \ - '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \ - '--seq-start=[Wait only for events after the given sequence number.]' \ - '--seq-end=[Wait only for events before the given sequence number.]' \ - '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \ - '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \ - '--help[Print help text.]' -} - -_udevadm_control(){ - _arguments \ - '--exit[Signal and wait for systemd-udevd to exit.]' \ - '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \ - '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \ - '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \ - '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \ - '--property=[Set a global property for all events.]' \ - '--children-max=[Set the maximum number of events.]' \ - '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \ - '--help[Print help text.]' -} - -_udevadm_monitor(){ - _arguments \ - '--kernel[Print the kernel uevents.]' \ - '--udev[Print the udev event after the rule processing.]' \ - '--property[Also print the properties of the event.]' \ - '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \ - '--tag-match=[Filter events by property.]' \ - '--help[Print help text.]' -} - -_udevadm_test(){ - _arguments \ - '--action=[The action string.]:actions:(add change remove)' \ - '--subsystem=[The subsystem string.]' \ - '--help[Print help text.]' \ - '*::devpath:_files -P /sys/ -W /sys' -} - -_udevadm_test-builtin(){ - if (( CURRENT == 2 )); then - _arguments \ - '--help[Print help text]' \ - '*::builtins:(blkid btrfs hwdb input_id kmod path_id usb_id uaccess)' - elif (( CURRENT == 3 )); then - _arguments \ - '--help[Print help text]' \ - '*::syspath:_files -P /sys -W /sys' - else - _arguments \ - '--help[Print help text]' - fi -} - -_udevadm_mounts(){ - local dev_tmp dpath_tmp mp_tmp mline - - tmp=( "${(@f)$(< /etc/mtab)}" ) - dev_tmp=( "${(@)${(@)tmp%% *}:#none}" ) - mp_tmp=( "${(@)${(@)tmp#* }%% *}" ) - - local MATCH - mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}") - dpath_tmp=( "${(@Mq)dev_tmp:#/*}" ) - dev_tmp=( "${(@q)dev_tmp:#/*}" ) - - _alternative \ - 'device-paths: device path:compadd -a dpath_tmp' \ - 'directories:mount point:compadd -a mp_tmp' -} - - -_udevadm_command(){ - local -a _udevadm_cmds - _udevadm_cmds=( - 'info:query sysfs or the udev database' - 'trigger:request events from the kernel' - 'settle:wait for the event queue to finish' - 'control:control the udev daemon' - 'monitor:listen to kernel and udev events' - 'test:test an event run' - 'test-builtin:test a built-in command' - ) - - if ((CURRENT == 1)); then - _describe -t commands 'udevadm commands' _udevadm_cmds - else - local curcontext="$curcontext" - cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}" - if (($#cmd)); then - if (( $+functions[_udevadm_$cmd] )); then - _udevadm_$cmd - else - _message "no options for $cmd" - fi - else - _message "no more options" - fi - fi -} - _ctls "$@" #vim: set ft=zsh sw=4 ts=4 et