X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=man%2Fsystemd.xml;h=4abd8902a431d4a579316dfdaa27b8741796911b;hp=c1766e26a46edc4ef94df9f7a02dae1733f5698a;hb=deb480d1a7c3f3178c44f0aa73765181c0e2317f;hpb=75c982a79f68a9209f0bcaf422d50414167bc5d1 diff --git a/man/systemd.xml b/man/systemd.xml index c1766e26a..4abd8902a 100644 --- a/man/systemd.xml +++ b/man/systemd.xml @@ -8,16 +8,16 @@ Copyright 2010 Lennart Poettering systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or + under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. systemd is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - General Public License for more details. + Lesser General Public License for more details. - You should have received a copy of the GNU General Public License + You should have received a copy of the GNU Lesser General Public License along with systemd; If not, see . --> @@ -45,7 +45,7 @@ systemd init - systemd System and Service Manager + systemd system and service manager @@ -78,7 +78,7 @@ the configuration file system.conf, otherwise user.conf. See - systemd.conf5 + systemd-system.conf5 for more information. @@ -95,6 +95,12 @@ Prints a short help text and exits. + + + + Prints a systemd version + identifier and exits. + @@ -112,25 +118,11 @@ configuration items understood in unit definition files. - - - - Extract D-Bus - interface introspection data. This is - mostly useful at install time - to generate data suitable for the - D-Bus interfaces - repository. Optionally the interface - name for the introspection data may be - specified. If omitted, the - introspection data for all interfaces - is dumped. - Set default unit to - activate on startup. If not specified + activate on startup. If not specified, defaults to default.target. @@ -138,11 +130,13 @@ - Tell systemd to run a - system instance (resp. user - instance), even if the process ID is - not 1 (resp. is 1), i.e. systemd is - not (resp. is) run as init process. + For , + tell systemd to run a + system instance, even if the process ID is + not 1, i.e. systemd is not run as init process. + does the opposite, + running a user instance even if the process + ID is 1. Normally it should not be necessary to pass these options, as systemd automatically detects the mode it is @@ -191,26 +185,16 @@ interpreted as . - - - - Controls whether - output of SysV init scripts will be - directed to the console. This switch - has no effect when run as user - instance. Takes a boolean argument - which may be omitted which is - interpreted as - . - Set log target. Argument must be one of , + , , , + , , . @@ -235,7 +219,7 @@ Highlight important log messages. Argument is a boolean - value. If the argument is omitted it + value. If the argument is omitted, it defaults to . @@ -255,24 +239,26 @@ Sets the default - output resp. error output for all - services and sockets, i.e. controls + output or error output for all + services and sockets, respectively. That is, controls the default for - resp. + and (see systemd.exec5 for details). Takes one of , , , + , + , , , , . If the argument is omitted - defaults to + defaults to and to @@ -285,25 +271,27 @@ Concepts systemd provides a dependency system between - various entities called "units". Units encapsulate - various objects that are relevant for system boot-up - and maintenance. The majority of units are configured - in unit configuration files, whose syntax and basic - set of options is described in + various entities called "units" of 12 different + types. Units encapsulate various objects that are + relevant for system boot-up and maintenance. The + majority of units are configured in unit configuration + files, whose syntax and basic set of options is + described in systemd.unit5, however some are created automatically from other - configuration or dynamically from system state. Units - may be 'active' (meaning started, bound, plugged in, - ... depending on the unit type, see below), or - 'inactive' (meaning stopped, unbound, unplugged, ...), - as well as in the process of being activated or - deactivated, i.e. between the two states (these states - are called 'activating', 'deactivating'). A special - 'failed' state is available as well which is very - similar to 'inactive' and is entered when the service - failed in some way (process returned error code on - exit, or crashed, or an operation timed out). If this - state is entered the cause will be logged, for later + configuration, dynamically from system state or + programmatically at runtime. Units may be "active" + (meaning started, bound, plugged in, ..., depending on + the unit type, see below), or "inactive" (meaning + stopped, unbound, unplugged, ...), as well as in the + process of being activated or deactivated, + i.e. between the two states (these states are called + "activating", "deactivating"). A special "failed" + state is available as well, which is very similar to + "inactive" and is entered when the service failed in + some way (process returned error code on exit, or + crashed, or an operation timed out). If this state is + entered, the cause will be logged, for later reference. Note that the various unit types may have a number of additional substates, which are mapped to the five generalized unit states described @@ -312,7 +300,7 @@ The following unit types are available: - Service units, which control + Service units, which start and control daemons and the processes they consist of. For details see systemd.service5. @@ -369,6 +357,18 @@ objects change or are modified. See systemd.path5. + Slice units may be used to + group units which manage system processes + (such as service and scope units) in a + hierarchical tree for resource management + purposes. See + systemd.slice5. + + Scope units are similar to + service units, but manage foreign processes + instead of starting them as well. See + systemd.scope5. + Units are named as their configuration @@ -393,7 +393,7 @@ and ordering dependencies are placed between two units. Also note that the majority of dependencies are implicitly created and maintained by systemd. In most - cases it should be unnecessary to declare additional + cases, it should be unnecessary to declare additional dependencies manually, however it is possible to do this. @@ -415,7 +415,7 @@ multi-user.target (for limited console-only boots for use in embedded or server environments, or similar; a subset of - graphical.target). However it is at the discretion of + graphical.target). However, it is at the discretion of the administrator to configure it as an alias to any other target unit. See systemd.special7 @@ -425,7 +425,7 @@ individual Linux control groups named after the unit which they belong to in the private systemd hierarchy. (see cgroups.txt + url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt for more information about control groups, or short "cgroups"). systemd uses this to effectively keep track of processes. Control group information is @@ -473,14 +473,14 @@ Systemd contains native implementations of various tasks that need to be executed as part of the - boot process. For example, it sets the host name or + boot process. For example, it sets the hostname or configures the loopback network device. It also sets up and mounts various API file systems, such as /sys or /proc. For more information about the concepts and - ideas behind systemd please refer to the Original Design Document. @@ -488,6 +488,21 @@ by systemd are covered by the Interface Stability Promise. + + Units may be generated dynamically at boot and + system manager reload time, for example based on other + configuration files or parameters passed on the kernel + command line. For details see the Generators + Specification. + + Systems which invoke systemd in a container + or initrd environment should implement the + Container + Interface or initrd + Interface specifications, respectively. @@ -520,7 +535,9 @@ disable commands of the systemctl1 - tool. + tool. Full list of directories is provided in + systemd.unit5. + @@ -549,7 +566,9 @@ tool can handle both global (i.e. for all users) and private (for one user) enabling/disabling of - units. + units. Full list of directories is provided in + systemd.unit5. + @@ -592,7 +611,7 @@ - SIGTERM + SIGTERM Upon receiving this signal the systemd system manager @@ -612,7 +631,7 @@ - SIGINT + SIGINT Upon receiving this signal the systemd system manager will @@ -624,11 +643,11 @@ systemd user managers treat this signal the same way as - SIGTERM. + SIGTERM. - SIGWINCH + SIGWINCH When this signal is received the systemd system manager @@ -644,7 +663,7 @@ - SIGPWR + SIGPWR When this signal is received the systemd manager @@ -656,7 +675,7 @@ - SIGUSR1 + SIGUSR1 When this signal is received the systemd manager will try @@ -665,7 +684,7 @@ - SIGUSR2 + SIGUSR2 When this signal is received the systemd manager will log @@ -676,7 +695,7 @@ - SIGHUP + SIGHUP Reloads the complete daemon configuration. This is mostly @@ -685,7 +704,7 @@ - SIGRTMIN+0 + SIGRTMIN+0 Enters default mode, starts the default.target @@ -695,7 +714,7 @@ - SIGRTMIN+1 + SIGRTMIN+1 Enters rescue mode, starts the @@ -706,7 +725,7 @@ - SIGRTMIN+2 + SIGRTMIN+2 Enters emergency mode, starts the @@ -717,7 +736,7 @@ - SIGRTMIN+3 + SIGRTMIN+3 Halts the machine, starts the @@ -728,7 +747,7 @@ - SIGRTMIN+4 + SIGRTMIN+4 Powers off the machine, starts the @@ -739,7 +758,7 @@ - SIGRTMIN+5 + SIGRTMIN+5 Reboots the machine, starts the @@ -750,7 +769,7 @@ - SIGRTMIN+6 + SIGRTMIN+6 Reboots the machine via kexec, starts the @@ -761,31 +780,31 @@ - SIGRTMIN+13 + SIGRTMIN+13 Immediately halts the machine. - SIGRTMIN+14 + SIGRTMIN+14 Immediately powers off the machine. - SIGRTMIN+15 + SIGRTMIN+15 Immediately reboots the machine. - SIGRTMIN+16 + SIGRTMIN+16 Immediately reboots the machine with kexec. - SIGRTMIN+20 + SIGRTMIN+20 Enables display of status messages on the console, as @@ -796,7 +815,7 @@ - SIGRTMIN+21 + SIGRTMIN+21 Disables display of status messages on the console, as @@ -807,39 +826,52 @@ - SIGRTMIN+22 - SIGRTMIN+23 + SIGRTMIN+22 + SIGRTMIN+23 Sets the log level to debug - (resp. info on - SIGRTMIN+23), as + (or info on + SIGRTMIN+23), as controlled via systemd.log_level=debug - (resp. systemd.log_level=info - on SIGRTMIN+23) on + (or systemd.log_level=info + on SIGRTMIN+23) on the kernel command line. - SIGRTMIN+27 - SIGRTMIN+28 - SIGRTMIN+29 + SIGRTMIN+24 + + Immediately exits the + manager (only available for --user + instances). + + + + SIGRTMIN+26 + SIGRTMIN+27 + SIGRTMIN+28 + SIGRTMIN+29 Sets the log level to - console - (resp. kmsg on - SIGRTMIN+28; - resp. syslog-or-kmsg - on SIGRTMIN+29), as + journal-or-kmsg + (or console on + SIGRTMIN+27, + kmsg on + SIGRTMIN+28, + or syslog-or-kmsg + on SIGRTMIN+29), as controlled via - systemd.log_target=console - (resp. systemd.log_target=kmsg - on SIGRTMIN+28; - resp + systemd.log_target=journal-or-kmsg + (or systemd.log_target=console + on SIGRTMIN+27, + systemd.log_target=kmsg + on SIGRTMIN+28, + or systemd.log_target=syslog-or-kmsg - on SIGRTMIN+29) on + on SIGRTMIN+29) on the kernel command line. @@ -849,7 +881,7 @@ Environment - + $SYSTEMD_LOG_LEVEL systemd reads the @@ -948,11 +980,21 @@ Kernel Command Line - When run as system instance systemd parses a few kernel command line arguments: + When run as system instance systemd parses a + number of kernel command line + argumentsIf run inside a Linux + container these arguments may be passed as command + line arguments to systemd itself, next to any of the + command line options listed in the Options section + above. If run outside of Linux containers, these + arguments are parsed from + /proc/cmdline + instead.: - + systemd.unit= + rd.systemd.unit= Overrides the unit to activate on boot. Defaults to @@ -962,17 +1004,21 @@ rescue.target or emergency.service. See systemd.special7 - for details about these - units. + for details about these units. The + option prefixed with + rd. is honored + only in the initial RAM disk (initrd), + while the one that is not prefixed only + in the main system. systemd.dump_core= Takes a boolean - argument. If + argument. If , systemd dumps core when it - crashes. Otherwise no core dump is + crashes. Otherwise, no core dump is created. Defaults to . @@ -981,9 +1027,9 @@ systemd.crash_shell= Takes a boolean - argument. If + argument. If , systemd spawns a shell when it - crashes. Otherwise no shell is + crashes. Otherwise, no shell is spawned. Defaults to , for security reasons, as the shell is not protected @@ -998,14 +1044,14 @@ argument. If positive systemd activates the specified virtual terminal when it crashes. Defaults to - -1. + -1. systemd.confirm_spawn= Takes a boolean - argument. If + argument. If , asks for confirmation when spawning processes. Defaults to . @@ -1015,24 +1061,20 @@ systemd.show_status= Takes a boolean - argument. If - shows terse service status updates on - the console during bootup. Defaults to - . - - - - systemd.sysv_console= - - Takes a boolean - argument. If - output of SysV init scripts will be - directed to the console. Defaults to + argument or the constant + auto. If + , shows terse + service status updates on the console + during bootup. + auto behaves like + until a service + fails or there is a significant delay + in boot. Defaults to , unless is passed as kernel command line option in which case it defaults to - . + auto. @@ -1051,15 +1093,127 @@ systemd.default_standard_output= systemd.default_standard_error= Controls default - standard output/error output for + standard output and error output for services, with the same effect as the - resp. + and command line arguments described - above. + above, respectively. + + + + systemd.setenv= + + Takes a string + argument in the form VARIABLE=VALUE. + May be used to set default environment + variables to add to forked child processes. + May be used more than once to set multiple + variables. + + + + quiet + + Turn off + status output at boot, much like + systemd.show_status=false + would. Note that this option is also + read by the kernel itself and disables + kernel log output. Passing this option + hence turns off the usual output from + both the system manager and the kernel. + + + + + debug + + Turn on debugging + output. This is equivalent to + systemd.log_level=debug. + Note that this option is also read by + the kernel itself and enables kernel + debug output. Passing this option + hence turns on the debug output from + both the system manager and the + kernel. + + -b + emergency + + Boot into emergency + mode. This is equivalent to + systemd.unit=emergency.target + and provided for compatibility + reasons and to be easier to type. + + + + single + s + S + 1 + + Boot into rescue + mode. This is equivalent to + systemd.unit=rescue.target + and provided for compatibility reasons + and to be easier to + type. + + + + 2 + 3 + 4 + 5 + + Boot into the + specified legacy SysV runlevel. These + are equivalent to + systemd.unit=runlevel2.target, + systemd.unit=runlevel3.target, + systemd.unit=runlevel4.target, + and systemd.unit=runlevel5.target, respectively, + and provided for compatibility reasons + and to be easier to + type. + + + + locale.LANG= + locale.LANGUAGE= + locale.LC_CTYPE= + locale.LC_NUMERIC= + locale.LC_TIME= + locale.LC_COLLATE= + locale.LC_MONETARY= + locale.LC_MESSAGES= + locale.LC_PAPER= + locale.LC_NAME= + locale.LC_ADDRESS= + locale.LC_TELEPHONE= + locale.LC_MEASUREMENT= + locale.LC_IDENTIFICATION= + + Set the system locale + to use. This overrides the settings in + /etc/locale.conf. For + more information see + locale.conf5 + and + locale7. + + + + For other kernel command line parameters + understood by components of the core OS, please refer + to + kernel-command-line7. @@ -1071,33 +1225,20 @@ Daemon status notification socket. This is an - AF_UNIX datagram socket and is used to + AF_UNIX datagram socket and is used to implement the daemon notification logic as implemented by sd_notify3. - - /run/systemd/stdout-syslog-bridge - - Used internally by the - systemd-stdout-syslog-bridge.service - unit to connect STDOUT and/or STDERR - of spawned processes to - syslog3 - or the kernel log buffer. This is an - AF_UNIX stream - socket. - - /run/systemd/shutdownd Used internally by the shutdown8 tool to implement delayed - shutdowns. This is an AF_UNIX datagram + shutdowns. This is an AF_UNIX datagram socket. @@ -1108,7 +1249,7 @@ communication channel between systemctl1 and the systemd process. This is an - AF_UNIX stream socket. This interface + AF_UNIX stream socket. This interface is private to systemd and should not be used in external projects. @@ -1132,14 +1273,20 @@ See Also + The systemd Homepage, + systemd-system.conf5, + locale.conf5, systemctl1, - systemadm1, + journalctl1, systemd-notify1, daemon7, - sd-daemon7, + sd-daemon3, systemd.unit5, systemd.special5, - pkg-config1 + pkg-config1, + kernel-command-line7, + bootup7, + systemd.directives7