X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=man%2Fsystemd.unit.xml;h=39da614a821cae36c7440e3e52c5c88efb1cb37d;hp=14da607a95f1f3288bb93455812d779c4b7056a8;hb=9f7dad774ebfad23269800b7096eaad087481deb;hpb=f14e15f8affe906a45d8afc76c302a49cd1f70ee
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
index 14da607a9..39da614a8 100644
--- a/man/systemd.unit.xml
+++ b/man/systemd.unit.xml
@@ -139,7 +139,10 @@
with the enable command of the
systemctl1
tool which reads information from the [Install]
- section of unit files. (See below.)
+ section of unit files. (See below.) A similar
+ functionality exists for Requires=
+ type dependencies as well, the directory suffix is
+ .requires/ in this case.
Note that while systemd offers a flexible
dependency system between units it is recommended to
@@ -216,21 +219,6 @@
dependent on the type of unit:
-
- Names=
-
- Additional names for
- this unit. The names listed here must
- have the same suffix (i.e. type) as
- the unit file name. This option may be
- specified more than once, in which
- case all listed names are used. Note
- that this option is different from the
- Alias= option from
- the [Install] section mentioned
- below. See below for details.
-
- Description=
@@ -281,7 +269,6 @@
services.
-
RequiresOverridable=
@@ -340,6 +327,23 @@
details see above.
+
+ BindTo=
+
+ Configures requirement
+ dependencies, very similar in style to
+ Requires=, however
+ in addition to this behaviour it also
+ declares that this unit is stopped
+ when any of the units listed suddenly
+ disappears. Units can suddenly,
+ unexpectedly disappear if a service
+ terminates on its own choice, a device
+ is unplugged or a mount point
+ unmounted without involvement of
+ systemd.
+
+
Conflicts=
@@ -441,27 +445,43 @@
- StopRetroactively=
+ OnFailureIsolate=
+
+ Takes a boolean
+ argument. If the
+ unit listed in
+ OnFailure= will be
+ enqueued in isolation mode, i.e. all
+ units that are not its dependency will
+ be stopped. If this is set only a
+ single unit may be listed in
+ OnFailure=. Defaults
+ to
+ .
+
+
+
+ IgnoreOnIsolate=Takes a boolean
- argument. If and
- a unit this unit requires stops
- without this being requested by the
- user, this unit will be stopped as
- well. (e.g. if a service exits or
- crashes on its own behalf, units this
- flag is set for that require it will
- be stopped.) Note that normally if a
- unit stops without a user request,
- units depending on it will not be
- terminated. Only if the user requested
- shutdown of a unit, all units
- depending on that unit will be shut
- down as well and at the same
- time. Defaults to
+ argument. If
+ this unit will not be stopped when
+ isolating another unit. Defaults to
.
+
+ IgnoreOnSnapshot=
+
+ Takes a boolean
+ argument. If
+ this unit will not be included in
+ snapshots. Defaults to
+ for device and
+ snapshot units,
+ for the others.
+
+
StopWhenUnneeded=
@@ -549,20 +569,6 @@
ones.
-
- IgnoreDependencyFailure=
-
- Takes a boolean
- argument. If and
- a requirement dependency of this unit
- fails to start up this unit will be
- started nonetheless, ignoring that
- failure. If
- (the default) and a dependency unit
- fails the unit will immediately fail
- too and the job is removed.
-
-
JobTimeoutSec=
@@ -593,13 +599,18 @@
ConditionPathExists=
+ ConditionPathIsDirectory=
+ ConditionDirectoryNotEmpty=ConditionKernelCommandLine=
+ ConditionVirtualization=
+ ConditionSecurity=
+ ConditionNull=Before starting a unit
verify that the specified condition is
true. With
ConditionPathExists=
- a file existance condition can be
+ a file existence condition can be
checked before a unit is started. If
the specified absolute path name does
not exist startup of a unit will not
@@ -613,25 +624,108 @@
is prefixed with an exclamation mark
(!), the test is negated, and the unit
only started if the path does not
- exist. Similarly
+ exist. ConditionPathIsDirectory=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a directory.
+ ConditionDirectoryNotEmpty=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a non-empty
+ directory. Similarly
ConditionKernelCommandLine=
may be used to check whether a
specific kernel command line option is
set (or if prefixed with the
exclamation mark unset). The argument
must either be a single word, or an
- assignment (i.e. two words, seperated
+ assignment (i.e. two words, separated
by the equality sign). In the former
- case the kernel command line is search
- for the word appearing as is, or as
- left hand side of an assignment. In
- the latter case the exact assignment
- is looked for with right and left hand
- side matching. If multiple conditions
- are specified the unit will be
- executed iff at least one of them
- apply (i.e. a logical OR is
- applied).
+ case the kernel command line is
+ searched for the word appearing as is,
+ or as left hand side of an
+ assignment. In the latter case the
+ exact assignment is looked for with
+ right and left hand side
+ matching. ConditionVirtualization=
+ may be used to check whether the
+ system is executed in a virtualized
+ environment and optionally test
+ whether it is a specific
+ implementation. Takes either boolean
+ value to check if being executed in
+ any virtual environment or one of the
+ qemu,
+ kvm,
+ vmware,
+ microsoft,
+ oracle,
+ xen,
+ pidns,
+ openvz to test
+ against a specific implementation. The
+ test may be negated by prepending an
+ exclamation mark.
+ ConditionSecurity=
+ may be used to check whether the given security
+ module is enabled on the system.
+ Currently the only recognized value is
+ selinux.
+ The test may be negated by prepending an
+ exclamation mark. Finally,
+ ConditionNull= may
+ be used to add a constant condition
+ check value to the unit. It takes a
+ boolean argument. If set to
+ false the condition
+ will always fail, otherwise
+ succeed. If multiple conditions are
+ specified the unit will be executed if
+ all of them apply (i.e. a logical AND
+ is applied). Condition checks can be
+ prefixed with a pipe symbol (|) in
+ which case a condition becomes a
+ triggering condition. If at least one
+ triggering condition is defined for a
+ unit then the unit will be executed if
+ at least one of the triggering
+ conditions apply and all of the
+ non-triggering conditions. If you
+ prefix an argument with the pipe
+ symbol and an exclamation mark the
+ pipe symbol must be passed first, the
+ exclamation second.
+
+
+
+ Names=
+
+ Additional names for
+ this unit. The names listed here must
+ have the same suffix (i.e. type) as
+ the unit file name. This option may be
+ specified more than once, in which
+ case all listed names are used. Note
+ that this option is different from the
+ Alias= option from
+ the [Install] section mentioned
+ below. See below for details. Note
+ that in almost all cases this option
+ is not what you want. A symlink alias
+ in the file system is generally
+ preferable since it can be used as
+ lookup key. If a unit with a symlinked
+ alias name is not loaded and needs to
+ be it is easily found via the
+ symlink. However, if a unit with an
+ alias name configured with this
+ setting is not loaded it will not be
+ discovered. This settings' only use is
+ in conjunction with service
+ instances.
+