X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=man%2Fsystemctl.xml;h=dd9fd995b3f45cc802722380208baf5a0c66df9c;hp=155dab31088d58896f98d4ff94e684ffbd93c696;hb=b619ec8f83ee3f524dae1f4692b26731bbe68616;hpb=5aded369782f28255bc6b494ca905d7acaea7a56 diff --git a/man/systemctl.xml b/man/systemctl.xml index 155dab310..dd9fd995b 100644 --- a/man/systemctl.xml +++ b/man/systemctl.xml @@ -1,4 +1,4 @@ - + @@ -60,10 +60,12 @@ along with systemd; If not, see . Description - systemctl may be used to - introspect and control the state of the + systemctl may be used to introspect and + control the state of the systemd system and + service manager. Please refer to systemd1 - system and service manager. + for an introduction into the basic concepts and functionality this + tool manages. @@ -96,9 +98,10 @@ along with systemd; If not, see . - The argument should be a comma-separated list of unit LOAD, - SUB, or ACTIVE states. When listing units, show only those - in specified states. + The argument should be a comma-separated list of unit + LOAD, SUB, or ACTIVE states. When listing units, show only + those in specified states. Use + to show only failed units. @@ -148,9 +151,12 @@ along with systemd; If not, see . Show reverse dependencies between units with - list-dependencies, i.e. units with - dependencies of type Wants= or - Requires= on the given unit. + list-dependencies, i.e. follow + dependencies of type WantedBy=, + RequiredBy=, + RequiredByOverrridable=, + PartOf=, BoundBy=, + instead of Wants= and similar. @@ -161,10 +167,20 @@ along with systemd; If not, see . With list-dependencies, show the units that are ordered before the specified unit. In other - words, list the units that are in the After= - directive of the specified unit, have the specified unit in - their Before= directive, or are otherwise - implicit dependencies of the specified unit. + words, recursively list units following the + After= dependency. + + Note that any After= dependency is + automatically mirrored to create a + Before= dependency. Temporal dependencies + may be specified explicitly, but are also created implicitly + for units which are WantedBy= targets + (see + systemd.target5), + and as a result of other directives (for example + RequiresMountsFor=). Both explicitly + and implicitly introduced dependencies are shown with + list-dependencies. @@ -174,10 +190,8 @@ along with systemd; If not, see . With list-dependencies, show the units that are ordered after the specified unit. In other - words, list the units that are in the Before= - directive of the specified unit, have the specified unit in - their After= directive, or otherwise depend - on the specified unit. + words, recursively list units following the + Before= dependency. @@ -319,6 +333,11 @@ along with systemd; If not, see . + + @@ -367,7 +386,6 @@ along with systemd; If not, see . querying the user for authentication for privileged operations. - @@ -463,7 +481,7 @@ along with systemd; If not, see . When used with enable, - disable, + disable, edit, (and related commands), make changes only temporarily, so that they are lost on the next reboot. This will have the effect that changes are not made in subdirectories of @@ -578,7 +596,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service See also the options , - , and . + , and . @@ -592,7 +610,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service See also the options and - . + . @@ -637,8 +655,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service file. This command should not be confused with the - daemon-reload or load - commands. + daemon-reload command. @@ -687,7 +704,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service Start the unit specified on the command line and its - dependencies and stop all others. + dependencies and stop all others. If a unit name with no + extension is given, an extension of + .target will be assumed. This is similar to changing the runlevel in a traditional init system. The isolate @@ -841,15 +860,30 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service - list-dependencies NAME + + list-dependencies + NAME + - Shows required and wanted units of the specified - unit. If no unit is specified, - default.target is implied. Target units - are recursively expanded. When is - passed, all other units are recursively expanded as - well. + Shows units required and wanted by the specified + unit. This recursively lists units following the + Requires=, + RequiresOverridable=, + Requisite=, + RequisiteOverridable=, + Wants=, BindsTo= + dependencies. If no unit is specified, + default.target is implied. + + By default, only target units are recursively + expanded. When is passed, all other + units are recursively expanded as well. + + Options , + , + may be used to change what types of dependencies + are shown. @@ -923,6 +957,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service the system, or for all future logins of all users, or only this boot. Note that in the last case, no systemd daemon configuration is reloaded. + + Using enable on masked units + results in an error. @@ -954,6 +991,56 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service + + reenable NAME... + + + Reenable one or more unit files, as specified on the + command line. This is a combination of + disable and enable and + is useful to reset the symlinks a unit is enabled with to + the defaults configured in the [Install] + section of the unit file. + + + + + preset NAME... + + + Reset one or more unit files, as specified on the + command line, to the defaults configured in the preset + policy files. This has the same effect as + disable or enable, + depending how the unit is listed in the preset files. + + Use to control + whether units shall be enabled and disabled, or only + enabled, or only disabled. + + For more information on the preset policy format, + see + systemd.preset5. + For more information on the concept of presets, please + consult the Preset + document. + + + + + preset-all + + + Resets all installed unit files to the defaults + configured in the preset policy file (see above). + + Use to control + whether units shall be enabled and disabled, or only + enabled, or only disabled. + + + is-enabled NAME... @@ -981,7 +1068,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service enabled - Enabled through a symlink in .wants directory (permanently or just in /run) + Enabled through a symlink in .wants directory (permanently or just in /run). 0 @@ -989,7 +1076,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service linked - Made available through a symlink to the unit file (permanently or just in /run) + Made available through a symlink to the unit file (permanently or just in /run). 1 @@ -997,7 +1084,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service masked - Disabled entirely (permanently or just in /run) + Disabled entirely (permanently or just in /run). 1 @@ -1005,12 +1092,17 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service static - Unit is not enabled, but has no provisions for enabling in [Install] section + Unit file is not enabled, and has no provisions for enabling in the [Install] section. + 0 + + + indirect + Unit file itself is not enabled, but it has a non-empty Also= setting in the [Install] section, listing other unit files that might be enabled. 0 disabled - Unit is not enabled + Unit file is not enabled. 1 @@ -1020,56 +1112,6 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service - - reenable NAME... - - - Reenable one or more unit files, as specified on the - command line. This is a combination of - disable and enable and - is useful to reset the symlinks a unit is enabled with to - the defaults configured in the [Install] - section of the unit file. - - - - - preset NAME... - - - Reset one or more unit files, as specified on the - command line, to the defaults configured in the preset - policy files. This has the same effect as - disable or enable, - depending how the unit is listed in the preset files. - - Use to control - whether units shall be enabled and disabled, or only - enabled, or only disabled. - - For more information on the preset policy format, - see - systemd.preset5. - For more information on the concept of presets, please - consult the Preset - document. - - - - - preset-all - - - Resets all installed unit files to the defaults - configured in the preset policy file (see above). - - Use to control - whether units shall be enabled and disabled, or only - enabled, or only disabled. - - - mask NAME... @@ -1079,8 +1121,8 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service /dev/null, making it impossible to start them. This is a stronger version of disable, since it prohibits all kinds of - activation of the unit, including manual activation. Use - this option with care. This honors the + activation of the unit, including enablement and manual + activation. Use this option with care. This honors the option to only mask temporarily until the next reboot of the system. @@ -1110,12 +1152,69 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service + + add-wants TARGET + NAME... + add-requires TARGET + NAME... + + + Adds Wants= resp. Requires= + dependency to the specified TARGET for + one or more units. + + This command honors , + , and + in a similar way as + enable. + + + + + + edit NAME... + + + Edit a drop-in snippet or a whole replacement file if + is specified, to extend or override the + specified unit. + + Depending on whether (the default), + , or is specified, + this creates a drop-in file for each unit either for the system, + for the calling user or for all futures logins of all users. Then, + the editor (see the "Environment" section below) is invoked on + temporary files which will be written to the real location if the + editor exits successfully. + + If is specified, this will copy the + original units instead of creating drop-in files. + + If is specified, the changes will + be made temporarily in /run and they will be + lost on the next reboot. + + If the temporary file is empty upon exit the modification of + the related unit is canceled + + After the units have been edited, systemd configuration is + reloaded (in a way that is equivalent to daemon-reload). + + + Note that this command cannot be used to remotely edit units + and that you cannot temporarily edit units which are in + /etc since they take precedence over + /run. + + + get-default - Get the default target specified - via default.target link. + Return the default target to boot into. This returns + the target unit name default.target + is aliased (symlinked) to. @@ -1123,10 +1222,12 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service set-default NAME - Set the default target to boot into. Command links - default.target to the given unit. + Set the default target to boot into. This sets + (symlinks) the default.target alias + to the given target unit. + @@ -1274,10 +1375,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service Reload systemd manager configuration. This will reload all unit files and recreate the entire dependency tree. While the daemon is being reloaded, all sockets systemd - listens on on behalf of user configuration will stay + listens on behalf of user configuration will stay accessible. This command should not be confused - with the load or - reload commands. + with the reload command. @@ -1305,13 +1405,62 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service is-system-running - Checks whether the system is running. This returns - success when the system is fully up and running, meaning - not in startup, shutdown or maintainance mode. Failure is - returned otherwise. In addition, the current state is - printed in a short string to standard output. Use - to suppress output of this state - string. + Checks whether the system is operational. This + returns success when the system is fully up and running, + meaning not in startup, shutdown or maintenance + mode. Failure is returned otherwise. In addition, the + current state is printed in a short string to standard + output, see table below. Use to + suppress this output. + + + Manager Operational States + + + + + + Name + Description + + + + + initializing + Early bootup, before + basic.target is reached + or the maintenance state entered. + + + + starting + Late bootup, before the job queue + becomes idle for the first time, or one of the + rescue targets are reached. + + + running + The system is fully + operational. + + + degraded + The system is operational but one or more + units failed. + + + maintenance + The rescue or emergency target is + active. + + + stopping + The manager is shutting + down. + + + +
@@ -1400,6 +1549,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service firmware over the air update. + kexec @@ -1413,6 +1563,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service immediately followed by the reboot. + exit @@ -1422,8 +1573,29 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service with the option) and will fail otherwise. + + + switch-root ROOT INIT + + + Switches to a different root directory and executes a + new system manager process below it. This is intended for + usage in initial RAM disks ("initrd"), and will transition + from the initrd's system manager process (a.k.a "init" + process) to the main system manager process. This call takes two + arguments: the directory that is to become the new root directory, and + the path to the new system manager binary below it to + execute as PID 1. If the latter is omitted or the empty + string, a systemd binary will automatically be searched for + and used as init. If the system manager path is omitted or + equal to the empty string, the state of the initrd's system + manager process is passed to the main system manager, which + allows later introspection of the state of the services + involved in the initrd boot. + + suspend @@ -1433,6 +1605,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service + hibernate @@ -1442,6 +1615,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service + hybrid-sleep @@ -1451,26 +1625,6 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service hybrid-sleep.target target. - - switch-root ROOT INIT - - - Switches to a different root directory and executes a - new system manager process below it. This is intended for - usage in initial RAM disks ("initrd"), and will transition - from the initrd's system manager process (a.k.a "init" - process) to the main system manager process. This call takes two - arguments: the directory that is to become the new root directory, and - the path to the new system manager binary below it to - execute as PID 1. If the latter is omitted or the empty - string, a systemd binary will automatically be searched for - and used as init. If the system manager path is omitted or - equal to the empty string, the state of the initrd's system - manager process is passed to the main system manager, which - allows later introspection of the state of the services - involved in the initrd boot. - - @@ -1489,9 +1643,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service # systemctl start sshd and # systemctl start sshd.service are equivalent, as are - # systemctl isolate snapshot-11 + # systemctl isolate default and - # systemctl isolate snapshot-11.snapshot + # systemctl isolate default.target Note that (absolute) paths to device nodes are automatically converted to device unit names, and other (absolute) paths to mount unit names. @@ -1537,7 +1691,28 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service code otherwise. - + + Environment + + + + $SYSTEMD_EDITOR + + Editor to use when editing units; overrides + $EDITOR and $VISUAL. If neither + $SYSTEMD_EDITOR nor $EDITOR nor + $VISUAL are present or if it is set to an empty + string or if their execution failed, systemctl will try to execute well + known editors in this order: + nano1, + vim1, + vi1. + + + + + + See Also @@ -1550,7 +1725,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service systemd.resource-management5, systemd.special7, wall1, - systemd.preset5 + systemd.preset5, glob7