X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=man%2Fmachinectl.xml;h=91bdb5e111505b068d0dd34acf3c92e773fae908;hp=baa0e17e3679bad93c0a3d2310214f80286488cc;hb=b50191c23f4cb6bac1180491b52e1df1e6c79a0f;hpb=8b0cc9a36c8f92f010f2e8465942d2cd7c580d78
diff --git a/man/machinectl.xml b/man/machinectl.xml
index baa0e17e3..91bdb5e11 100644
--- a/man/machinectl.xml
+++ b/man/machinectl.xml
@@ -76,27 +76,31 @@
- When showing
- machine properties, limit the
- output to certain properties as
- specified by the argument. If not
- specified, all set properties are
- shown. The argument should be a
- property name, such as
- Name. If
- specified more than once, all
- properties with the specified names
- are shown.
+ When showing machine
+ or image properties, limit the output
+ to certain properties as specified by
+ the argument. If not specified, all
+ set properties are shown. The argument
+ should be a property name, such as
+ Name. If specified
+ more than once, all properties with
+ the specified names are
+ shown.
- When showing
- machine properties, show all
- properties regardless of whether they are
- set or not.
+ When showing machine
+ or image properties, show all
+ properties regardless of whether they
+ are set or not.
+
+ When listing VM or container
+ images, do not suppress images
+ beginning in a dot character
+ (.).
@@ -108,6 +112,14 @@
+
+
+
+ Do not query the user
+ for authentication for privileged
+ operations.
+
+
@@ -200,16 +212,24 @@
+
+
+
+ CommandsThe following commands are understood:
-
+ Machine Commands
+
listList currently running
- virtual machines and containers.
-
+ (online) virtual machines and
+ containers. To enumerate container
+ images that can be started,
+ use list-images
+ (see below).
@@ -256,30 +276,92 @@
output.
+
+ startNAME...
+
+ Start a container as a
+ system service, using
+ systemd-nspawn1.
+ This starts
+ systemd-nspawn@.service,
+ instantiated for the specified machine
+ name, similar to the effect of
+ systemctl start on
+ the service
+ name. systemd-nspawn
+ looks for a container image by the
+ specified name in
+ /var/lib/container
+ and runs it. Use
+ list-images (see
+ below), for listing available
+ container images to start.
+
+ Note that
+ systemd-machined.service8
+ also interfaces with a variety of
+ other container and VM managers,
+ systemd-nspawn is
+ just one implementation of it. Most of
+ the commands available in
+ machinectl may be
+ used on containers or VMs controlled
+ by other managers, not just
+ systemd-nspawn. Starting
+ VMs and container images on those
+ managers requires manager-specific
+ tools.
+
+ To interactively start a
+ container on the command line with
+ full access to the container's
+ console, please invoke
+ systemd-nspawn
+ directly. To stop a running container
+ use machinectl
+ poweroff, see
+ below.
+
+
loginNAME
- Open a terminal login
+ Open an interactive terminal login
session to a container. This will
create a TTY connection to a specific
container and asks for the execution of a
getty on it. Note that this is only
supported for containers running
systemd1
- as init system.
+ as init system.
+
+ This command will open a full
+ login prompt on the container, which
+ then asks for username and
+ password. Use
+ systemd-run1
+ with the
+ switch to invoke a single command,
+ either interactively or in the
+ background within a local
+ container.
- rebootNAME...
-
- Reboot one or more
- containers. This will trigger a reboot
- by sending SIGINT to the container's
- init process, which is roughly
- equivalent to pressing Ctrl+Alt+Del on
- a non-containerized system, and is
- compatible with containers running any
- init system.
+ enableNAME...
+ disableNAME...
+
+ Enable or disable a
+ container as a system service to start
+ at system boot, using
+ systemd-nspawn1.
+ This enables or disables
+ systemd-nspawn@.service,
+ instantiated for the specified machine
+ name, similar to the effect of
+ systemctl enable or
+ systemctl disable
+ on the service name.
@@ -294,8 +376,38 @@
not work on containers that do not run
a
systemd1-compatible
- init system, such as
- sysvinit.
+ init system, such as sysvinit. Use
+ terminate (see
+ below) to immediately terminate a
+ container or VM, without cleanly
+ shutting it down.
+
+
+
+ rebootNAME...
+
+ Reboot one or more
+ containers. This will trigger a reboot
+ by sending SIGINT to the container's
+ init process, which is roughly
+ equivalent to pressing Ctrl+Alt+Del on
+ a non-containerized system, and is
+ compatible with containers running any
+ system manager.
+
+
+
+ terminateNAME...
+
+ Immediately terminates
+ a virtual machine or container,
+ without cleanly shutting it down. This
+ kills all processes of the virtual
+ machine or container and deallocates
+ all resources attached to that
+ instance. Use
+ poweroff to issue a
+ clean shutdown request.
@@ -313,17 +425,6 @@
the signal to send.
-
- terminateNAME...
-
- Terminates a virtual
- machine or container. This kills all
- processes of the virtual machine or
- container and deallocates all
- resources attached to that
- instance.
-
-
bindNAMEPATH [PATH]
@@ -375,8 +476,122 @@
omitted the same as the source path is
used.
+
-
+ Image Commands
+
+
+ list-images
+
+ Show a list of locally
+ installed container and VM
+ images. This enumerates all raw disk
+ images and container directories and
+ subvolumes in
+ /var/lib/container/. Use
+ start (see above)
+ to run a container off one of the
+ listed images. Note that by default
+ containers whose name begins with a
+ dot (.) are not
+ shown. To show these too, specify
+ . Note that a
+ special image .host
+ always implicitly exists and refers to
+ the image the host itself is booted
+ from.
+
+
+
+ image-statusNAME...
+
+ Show terse status
+ information about one or more
+ container or VM images. This function
+ is intended to generate human-readable
+ output. Use
+ show-image (see
+ below) to generate computer-parsable
+ output instead.
+
+
+
+ show-imageNAME...
+
+ Show properties of one
+ or more registered virtual machine or
+ container images, or the manager
+ itself. If no argument is specified,
+ properties of the manager will be
+ shown. If an NAME is specified,
+ properties of this virtual machine or
+ container image are shown. By default,
+ empty properties are suppressed. Use
+ to show those
+ too. To select specific properties to
+ show, use
+ . This
+ command is intended to be used
+ whenever computer-parsable output is
+ required. Use
+ image-status if you
+ are looking for formatted
+ human-readable
+ output.
+
+
+
+ cloneNAMENAME
+
+ Clones a container or
+ disk image. The arguments specify the
+ name of the image to clone and the
+ name of the newly cloned image. Note
+ that plain directory container images
+ are cloned into subvolume images with
+ this command. Note that cloning a
+ container or VM image is optimized for
+ btrfs file systems, and might not be
+ efficient on others, due to file
+ system limitations.
+
+
+
+ renameNAMENAME
+
+ Renames a container or
+ disk image. The arguments specify the
+ name of the image to rename and the
+ new name of the
+ image.
+
+
+
+ read-onlyNAME [BOOL]
+
+ Marks or (unmarks) a
+ container or disk image
+ read-only. Takes a VM or container
+ image name, followed by a boolean as
+ arguments. If the boolean is omitted,
+ positive is implied, i.e. the image is
+ marked read-only.
+
+
+
+
+ removeNAME...
+
+ Removes one or more
+ container or disk images. The special
+ image .host, which
+ refers to the host's own directory
+ tree may not be
+ removed.
+
+
+
+