X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=README;h=5cac0213ad1b1464c5c61850df8afaae9ebbf537;hp=0af212de9c625c3aae3856d6d49e39098302e0f0;hb=bde1af68b61f0f36127de09eee5a5051ae5c9167;hpb=05b9640022d25a75923cc7809409914491a5f9da diff --git a/README b/README index 0af212de9..5cac0213a 100644 --- a/README +++ b/README @@ -1,91 +1,96 @@ -udev - userspace device management +udev - Linux userspace device management -For more information see the files in the docs/ directory. +Integrating udev in the system has complex dependencies and may differ from +distribution to distribution. A system may not be able to boot up or work +reliably without a properly installed udev version. The upstream udev project +does not recommend replacing a distro's udev installation with the upstream +version. -Important Note: - Integrating udev in the system has complex dependencies and differs from distro - to distro. All major distros depend on udev these days and the system may not - work without a properly installed version. The upstream udev project does not - recommend to replace a distro's udev installation with the upstream version. +The upstream udev project's set of default rules may require a most recent +kernel release to work properly. This is currently version 2.6.31. + +Tools and rules shipped by udev are not public API and may change at any time. +Never call any private tool in /lib/udev from any external application; it might +just go away in the next release. Access to udev information is only offered +by udevadm and libudev. Tools and rules in /lib/udev and the entire contents of +the /dev/.udev directory are private to udev and do change whenever needed. Requirements: - - Version 2.6.18 of the Linux kernel for reliable operation of this release of - udev. The kernel may have a requirement on udev too, see Documentation/Changes - in the kernel source tree for the actual dependency. + - Version 2.6.27 of the Linux kernel with sysfs, procfs, signalfd, inotify, + unix domain sockets, networking and hotplug enabled: + CONFIG_HOTPLUG=y + CONFIG_UEVENT_HELPER_PATH="" + CONFIG_NET=y + CONFIG_UNIX=y + CONFIG_SYSFS=y + CONFIG_SYSFS_DEPRECATED*=n + CONFIG_PROC_FS=y + CONFIG_TMPFS=y + CONFIG_INOTIFY_USER=y + CONFIG_SIGNALFD=y + CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes) + CONFIG_BLK_DEV_BSG=y (SCSI devices) + + - Udev does not work with the CONFIG_SYSFS_DEPRECATED* option. + + - Unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work, + but it is not supported. + + - The deprecated hotplug helper /sbin/hotplug should be disabled in the + kernel configuration, it is not needed today, and may render the system + unusable because the kernel may create too many processes in parallel + so that the system runs out-of-memory. + + - The proc filesystem must be mounted on /proc, and the sysfs filesystem must + be mounted at /sys. No other locations are supported by a standard + udev installation. + + - The system must have the following group names resolvable at udev startup: + disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, and kmem. + Especially in LDAP setups, it is required, that getgrnam() is able to resolve + these group names with only the rootfs mounted, and while no network is + available. + + - To build all 'udev extras', libacl, libglib2, libusb, usbutils, pciutils, + and gperf are needed. These dependencies can be disabled with the + --disable-extras configure option. + +Setup: + - At bootup, the /dev directory should get the 'devtmpfs' filesystem + mounted. Udev manages the permissions and ownership of the kernel-created + device nodes, and udev possibly creates additional symlinks. If needed, udev also + works on an empty 'tmpfs' filesystem, but some static device nodes like + /dev/null, /dev/console, /dev/kmsg are needed to be able to start udev itself. + + - The udev daemon should be started to handle device events sent by the kernel. + During bootup, the kernel can be asked to send events for all already existing + devices, to apply the configuration to these devices. This is usually done by: + /sbin/udevadm trigger --type=subsystems + /sbin/udevadm trigger --type=devices + + - Restarting the daemon does never apply any rules to existing devices. + + - New/changed rule files are picked up automatically; there is no daemon + restart or signal needed. - - The kernel must have sysfs, unix domain sockets and networking enabled. - (unix domain sockets (CONFIG_UNIX) as a loadable kernel module may work, - but it does not make any sense - don't complain if anything goes wrong.) +Operation: + - Udev creates/removes device nodes in /dev, based on events the kernel + sends out on device creation/removal. - - The proc filesystem must be mounted on /proc, the sysfs filesystem must - be mounted at /sys. No other locations are supported by udev. + - All kernel events are matched against a set of specified rules, which + possibly hook into the event processing and load required kernel + modules to setup devices. For all devices the kernel exports a major/minor + number; if needed, udev creates a device node with the default kernel + name. If specified, udev applies permissions/ownership to the device + node, creates additional symlinks pointing to the node, and executes + programs to handle the device. + - The events udev handles, and the information udev merges into its device + database, can be accessed with libudev: + http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/ + http://www.kernel.org/pub/linux/utils/kernel/hotplug/gudev/ -Operation: - Udev creates and removes device nodes in /dev, based on events the kernel - sends out on device discovery or removal. - - - Very early in the boot process, the /dev directory should get a 'tmpfs' - filesystem mounted, which is populated from scratch by udev. Created nodes - or changed permissions will not survive a reboot, which is intentional. - - - The content of /lib/udev/devices directory which contains the nodes, - symlinks and directories, which are always expected to be in /dev, should - be copied over to the tmpfs mounted /dev, to provide the required nodes - to initialize udev and continue booting. - - - The old hotplug helper /sbin/hotplug should be disabled on bootup, before - actions like loading kernel modules are taken, which may cause a lot of - events. - - - The udevd daemon must be started on bootup to receive netlink uevents - from the kernel driver core. - - - All kernel events are matched against a set of specified rules in - /lib/udev/rules.d/ which make it possible to hook into the event - processing to load required kernel modules and setup devices. For all - devices the kernel exports a major/minor number, udev will create a - device node with the default kernel name, or the one specified by a - matching udev rule. - - -Compile Options: - DESTDIR - Prefix of install target, used for package building. - USE_LOG - If set to 'true', udev is able to pass errors or debug information - to syslog. This is very useful to see what udev is doing or not doing. - It is enabled by default, don't expect any useful answer, if you - need to hunt a bug, but you can't enable syslog. - DEBUG - If set to 'true', very verbose debugging messages will be compiled - into the udev binaries. The actual level of debugging is specified - in the udev config file. - USE_SELINUX - If set to 'true', udev will be built with SELinux support - enabled. This is disabled by default. - EXTRAS - list of helper programs in extras/ to build. - make EXTRAS="extras/cdrom_id extras/scsi_id extras/volume_id" - - -Installation: - - The install target intalls the udev binaries in the default locations, - All binaries will be installed in /lib/udev or /sbin. - - - The default location for scripts and binaries that are called from - rules is /lib/udev. Other packages who install udev rules, may use - that directory too. - - - It is recommended to use the /lib/udev/devices/ directory to place - device nodes and symlinks in, which are copied to /dev at every boot. - That way, nodes for broken subsystems or devices which can't be - detected automatically by the kernel, will always be available. - - - Default udev rules and persistent device naming rules are required by other - software that depends on the data udev collects from the devices, - and should be installed by default with every udev installation. - -Please direct any comment/question/concern to the linux-hotplug-devel mailing list at: - linux-hotplug@vger.kernel.org +For more details about udev and udev rules see the udev(7) man page. +Please direct any comment/question to the linux-hotplug mailing list at: + linux-hotplug@vger.kernel.org