X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=elogind.git;a=blobdiff_plain;f=README;h=0d25b84fad9f2c604ad83271c51572e49b6c7eb2;hp=476ee2ec6e12bf4a43cf34800a1c029b2986cd46;hb=e216e514cf0c3bc6352f43fa3a7ffad221200bca;hpb=00ecb6745b4021a9cae6056132dc5be3cfcc26b5 diff --git a/README b/README index 476ee2ec6..0d25b84fa 100644 --- a/README +++ b/README @@ -7,17 +7,22 @@ does not recommend replacing a distro's udev installation with the upstream version. The upstream udev project's set of default rules may require a most recent -kernel release to work properly. This is currently version 2.6.31. +kernel release to work properly. This is currently version 2.6.32. Tools and rules shipped by udev are not public API and may change at any time. -Never call any private tool in /lib/udev from any external application; it might -just go away in the next release. Access to udev information is only offered -by udevadm and libudev. Tools and rules in /lib/udev and the entire contents of -the /dev/.udev directory are private to udev and do change whenever needed. +Never call any private tool in /usr/lib/udev from any external application; it +might just go away in the next release. Access to udev information is only offered +by udevadm and libudev. Tools and rules in /usr/lib/udev and the entire contents +of the /run/udev directory are private to udev and do change whenever needed. Requirements: - - Version 2.6.27 of the Linux kernel with sysfs, procfs, signalfd, inotify, - unix domain sockets, networking and hotplug enabled: + - Version 2.6.34 of the Linux kernel with sysfs, procfs, signalfd, inotify, + unix domain sockets, networking and hotplug enabled + + - Some architectures might need a later kernel, that supports accept4(), + or need to backport the accept4() syscall wiring in the kernel. + + - These options are needed: CONFIG_HOTPLUG=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_NET=y @@ -25,9 +30,11 @@ Requirements: CONFIG_SYSFS=y CONFIG_SYSFS_DEPRECATED*=n CONFIG_PROC_FS=y - CONFIG_TMPFS=y CONFIG_INOTIFY_USER=y CONFIG_SIGNALFD=y + + - These options might be needed: + CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes) CONFIG_BLK_DEV_BSG=y (SCSI devices) @@ -45,28 +52,28 @@ Requirements: be mounted at /sys. No other locations are supported by a standard udev installation. - - The system must have the following group names resolvable at udev startup: + - The default rule sset requires the following group names resolvable at udev startup: disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, and kmem. Especially in LDAP setups, it is required that getgrnam() be able to resolve these group names with only the rootfs mounted and while no network is available. - - The 'udev extras' has the following dependencies: - libacl, libglib2, libusb, usbutils, pciutils, and gperf. - These dependencies can be disabled with the --disable-extras configure option. + - Some udev extras have external dependencies like: + libacl, libglib2, usbutils, pciutils, and gperf. + All these extras can be disabled with configure options. Setup: - At bootup, the /dev directory should get the 'devtmpfs' filesystem mounted. Udev manages the permissions and ownership of the kernel-created device nodes, and udev possibly creates additional symlinks. If needed, udev also - works on an empty 'tmpfs' filesystem, but some static device nodes like - /dev/null, /dev/console, /dev/kmsg are needed to be able to start udev itself. + works on an empty 'tmpfs' filesystem, but some device nodes like + /dev/null, /dev/console, /dev/kmsg should be created before udevd is started. - The udev daemon should be started to handle device events sent by the kernel. - During bootup, the kernel can be asked to send events for all already existing - devices so that they too can be configured by udev. This is usually done by: - /sbin/udevadm trigger --type=subsystems - /sbin/udevadm trigger --type=devices + During bootup, the events for already existing devices can be replayed, so + that they are configured by udev. This is usually done by: + udevadm trigger --action=add --type=subsystems + udevadm trigger --action=add --type=devices - Restarting the daemon never applies any rules to existing devices. @@ -75,13 +82,13 @@ Setup: Operation: - Based on events the kernel sends out on device creation/removal, udev - creates/removes device nodes in the /dev directory. + creates/removes device nodes and symlinks in the /dev directory. - All kernel events are matched against a set of specified rules, which possibly hook into the event processing and load required kernel - modules to set up devices. For all devices the kernel exports a major/minor + modules to set up devices. For all devices, the kernel exports a major/minor number; if needed, udev creates a device node with the default kernel - name. If specified, udev applies permissions/ownership to the device + device name. If specified, udev applies permissions/ownership to the device node, creates additional symlinks pointing to the node, and executes programs to handle the device. @@ -90,7 +97,8 @@ Operation: http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/ http://www.kernel.org/pub/linux/utils/kernel/hotplug/gudev/ -For more details about udev and udev rules see the udev(7) man page. +For more details about udev and udev rules, see the udev man pages: + http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev/ Please direct any comment/question to the linux-hotplug mailing list at: linux-hotplug@vger.kernel.org