chiark / gitweb /
util: unify usage of on_tty() in util.c
[elogind.git] / src / systemctl / systemctl.c
index cc9c775251d813c740916b285acff37ff4241569..d77d534e0bde068ddebdfeb907d616f060bebea0 100644 (file)
@@ -132,26 +132,8 @@ static bool private_bus = false;
 static int daemon_reload(DBusConnection *bus, char **args);
 static void halt_now(enum action a);
 
-static bool on_tty(void) {
-        static int t = -1;
-
-        /* Note that this is invoked relatively early, before we start
-         * the pager. That means the value we return reflects whether
-         * we originally were started on a tty, not if we currently
-         * are. But this is intended, since we want colour and so on
-         * when run in our own pager. */
-
-        if (_unlikely_(t < 0))
-                t = isatty(STDOUT_FILENO) > 0;
-
-        return t;
-}
-
 static void pager_open_if_enabled(void) {
 
-        /* Cache result before we open the pager */
-        on_tty();
-
         if (arg_no_pager)
                 return;
 
@@ -186,6 +168,14 @@ static void polkit_agent_open_if_enabled(void) {
 }
 #endif
 
+static const char *ansi_highlight(bool b) {
+
+        if (!on_tty())
+                return "";
+
+        return b ? ANSI_HIGHLIGHT_ON : ANSI_HIGHLIGHT_OFF;
+}
+
 static const char *ansi_highlight_red(bool b) {
 
         if (!on_tty())
@@ -372,15 +362,6 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) {
         } else
                 id_len = max_id_len;
 
-        if (!arg_no_legend) {
-                printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD",
-                       active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB");
-                if (!arg_full && arg_no_pager)
-                        printf("%.*s\n", desc_len, "DESCRIPTION");
-                else
-                        printf("%s\n", "DESCRIPTION");
-        }
-
         for (u = unit_infos; u < unit_infos + c; u++) {
                 char *e;
                 const char *on_loaded, *off_loaded;
@@ -389,6 +370,15 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) {
                 if (!output_show_unit(u))
                         continue;
 
+                if (!n_shown && !arg_no_legend) {
+                        printf("%-*s %-6s %-*s %-*s %-*s ", id_len, "UNIT", "LOAD",
+                               active_len, "ACTIVE", sub_len, "SUB", job_len, "JOB");
+                        if (!arg_full && arg_no_pager)
+                                printf("%.*s\n", desc_len, "DESCRIPTION");
+                        else
+                                printf("%s\n", "DESCRIPTION");
+                }
+
                 n_shown++;
 
                 if (streq(u->load_state, "error")) {
@@ -420,17 +410,28 @@ static void output_units_list(const struct unit_info *unit_infos, unsigned c) {
         }
 
         if (!arg_no_legend) {
-                printf("\nLOAD   = Reflects whether the unit definition was properly loaded.\n"
-                       "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n"
-                       "SUB    = The low-level unit activation state, values depend on unit type.\n"
-                       "JOB    = Pending job for the unit.\n");
+                const char *on, *off;
+
+                if (n_shown) {
+                        printf("\nLOAD   = Reflects whether the unit definition was properly loaded.\n"
+                               "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n"
+                               "SUB    = The low-level unit activation state, values depend on unit type.\n"
+                               "JOB    = Pending job for the unit.\n\n");
+                        on = ansi_highlight(true);
+                        off = ansi_highlight(false);
+                } else {
+                        on = ansi_highlight_red(true);
+                        off = ansi_highlight_red(false);
+                }
 
                 if (arg_all)
-                        printf("\n%u loaded units listed.\n"
-                               "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown);
+                        printf("%s%u loaded units listed.%s\n"
+                               "To show all installed unit files use 'systemctl list-unit-files'.\n",
+                               on, n_shown, off);
                 else
-                        printf("\n%u loaded units listed. Pass --all to see loaded but inactive units, too.\n"
-                               "To show all installed unit files use 'systemctl list-unit-files'.\n", n_shown);
+                        printf("%s%u loaded units listed.%s Pass --all to see loaded but inactive units, too.\n"
+                               "To show all installed unit files use 'systemctl list-unit-files'.\n",
+                               on, n_shown, off);
         }
 }
 
@@ -1445,7 +1446,7 @@ static void check_triggering_units(
                 DBusConnection *bus,
                 const char *unit_name) {
 
-        DBusMessage _cleanup_dbus_msg_unref_ *reply = NULL;
+        _cleanup_dbus_message_unref_ DBusMessage *reply = NULL;
         DBusMessageIter iter, sub;
         char *service_trigger = NULL;
         const char *interface = "org.freedesktop.systemd1.Unit",
@@ -1523,7 +1524,7 @@ static int start_unit_one(
                 DBusError *error,
                 Set *s) {
 
-        DBusMessage _cleanup_dbus_msg_unref_ *reply = NULL;
+        _cleanup_dbus_message_unref_ DBusMessage *reply = NULL;
         const char *path;
         int r;
         _cleanup_free_ char *n, *p = NULL;
@@ -2274,14 +2275,19 @@ static void print_status_info(UnitStatusInfo *i) {
         if (i->id && arg_transport != TRANSPORT_SSH) {
                 int flags =
                         arg_all * OUTPUT_SHOW_ALL |
+                        (!on_tty() || pager_have()) * OUTPUT_FULL_WIDTH |
+                        on_tty() * OUTPUT_COLOR |
                         arg_follow * OUTPUT_FOLLOW |
-                        !arg_quiet * OUTPUT_WARN_CUTOFF |
-                        on_tty() * OUTPUT_COLOR;
+                        !arg_quiet * OUTPUT_WARN_CUTOFF;
 
                 printf("\n");
-                show_journal_by_unit(i->id, arg_output, 0,
+                show_journal_by_unit(stdout,
+                                     i->id,
+                                     arg_output,
+                                     0,
                                      i->inactive_exit_timestamp_monotonic,
-                                     arg_lines, flags);
+                                     arg_lines,
+                                     flags);
         }
 
         if (i->need_daemon_reload)
@@ -3571,7 +3577,15 @@ static int mangle_names(char **original_names, char ***mangled_names) {
 
         i = l;
         STRV_FOREACH(name, original_names) {
-                *i = unit_name_mangle(*name);
+
+                /* When enabling units qualified path names are OK,
+                 * too, hence allow them explicitly. */
+
+                if (is_path(*name))
+                        *i = strdup(*name);
+                else
+                        *i = unit_name_mangle(*name);
+
                 if (!*i) {
                         strv_free(l);
                         return log_oom();
@@ -3916,7 +3930,7 @@ static int systemctl_help(void) {
                "  -n --lines=INTEGER  Journal entries to show\n"
                "     --follow         Follow journal\n"
                "  -o --output=STRING  Change journal output mode (short, short-monotonic,\n"
-               "                      verbose, export, json, json-pretty, cat)\n\n"
+               "                      verbose, export, json, json-pretty, json-sse, cat)\n\n"
                "Unit Commands:\n"
                "  list-units                      List loaded units\n"
                "  start [NAME...]                 Start (activate) one or more units\n"