-/*-*- Mode: C; c-basic-offset: 8 -*-*/
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
/***
This file is part of systemd.
#include "path-lookup.h"
#include "conf-parser.h"
#include "sd-daemon.h"
+#include "shutdownd.h"
+#include "exit-status.h"
static const char *arg_type = NULL;
static char **arg_property = NULL;
static bool arg_full = false;
static bool arg_force = false;
static bool arg_defaults = false;
+static bool arg_sysv_compat = false; /* this is undocumented, and
+ * exists simply to make
+ * implementation of SysV
+ * compatible shell glue
+ * easier */
static char **arg_wall = NULL;
+static usec_t arg_when = 0;
static enum action {
ACTION_INVALID,
ACTION_SYSTEMCTL,
ACTION_RELOAD,
ACTION_REEXEC,
ACTION_RUNLEVEL,
+ ACTION_CANCEL_SHUTDOWN,
_ACTION_MAX
} arg_action = ACTION_SYSTEMCTL;
static enum dot {
return b ? ANSI_HIGHLIGHT_GREEN_ON : ANSI_HIGHLIGHT_OFF;
}
-static bool error_is_no_service(DBusError *error) {
-
+static bool error_is_no_service(const DBusError *error) {
assert(error);
if (!dbus_error_is_set(error))
utmp_wall(table[action]);
}
+struct unit_info {
+ const char *id;
+ const char *description;
+ const char *load_state;
+ const char *active_state;
+ const char *sub_state;
+ const char *following;
+ const char *unit_path;
+ uint32_t job_id;
+ const char *job_type;
+ const char *job_path;
+};
+
+static int compare_unit_info(const void *a, const void *b) {
+ const char *d1, *d2;
+ const struct unit_info *u = a, *v = b;
+
+ d1 = strrchr(u->id, '.');
+ d2 = strrchr(v->id, '.');
+
+ if (d1 && d2) {
+ int r;
+
+ if ((r = strcasecmp(d1, d2)) != 0)
+ return r;
+ }
+
+ return strcasecmp(u->id, v->id);
+}
+
static int list_units(DBusConnection *bus, char **args, unsigned n) {
DBusMessage *m = NULL, *reply = NULL;
DBusError error;
int r;
DBusMessageIter iter, sub, sub2;
- unsigned k = 0;
+ unsigned c = 0, k, n_units = 0;
+ struct unit_info *unit_infos = NULL;
dbus_error_init(&error);
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_iter_recurse(&iter, &sub);
- if (isatty(STDOUT_FILENO))
- printf("%-45s %-6s %-12s %-12s %-15s %s\n", "UNIT", "LOAD", "ACTIVE", "SUB", "JOB", "DESCRIPTION");
-
while (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_INVALID) {
- const char *id, *description, *load_state, *active_state, *sub_state, *following, *unit_path, *job_type, *job_path, *dot;
- uint32_t job_id;
+ struct unit_info *u;
if (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_STRUCT) {
log_error("Failed to parse reply.");
goto finish;
}
+ if (c >= n_units) {
+ struct unit_info *w;
+
+ n_units = MAX(2*c, 16);
+ w = realloc(unit_infos, sizeof(struct unit_info) * n_units);
+
+ if (!w) {
+ log_error("Failed to allocate unit array.");
+ r = -ENOMEM;
+ goto finish;
+ }
+
+ unit_infos = w;
+ }
+
+ u = unit_infos+c;
+
dbus_message_iter_recurse(&sub, &sub2);
- if (bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &id, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &description, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &load_state, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &active_state, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &sub_state, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &following, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_OBJECT_PATH, &unit_path, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_UINT32, &job_id, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &job_type, true) < 0 ||
- bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_OBJECT_PATH, &job_path, false) < 0) {
+ if (bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->id, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->description, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->load_state, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->active_state, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->sub_state, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->following, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_OBJECT_PATH, &u->unit_path, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_UINT32, &u->job_id, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_STRING, &u->job_type, true) < 0 ||
+ bus_iter_get_basic_and_next(&sub2, DBUS_TYPE_OBJECT_PATH, &u->job_path, false) < 0) {
log_error("Failed to parse reply.");
r = -EIO;
goto finish;
}
- if ((!arg_type || ((dot = strrchr(id, '.')) &&
+ dbus_message_iter_next(&sub);
+ c++;
+ }
+
+ qsort(unit_infos, c, sizeof(struct unit_info), compare_unit_info);
+
+ if (isatty(STDOUT_FILENO)) {
+ if (columns() >= 80+12 || arg_full)
+ printf("%-25s %-6s %-12s %-18s %-15s %s\n", "UNIT", "LOAD", "ACTIVE", "SUB", "JOB", "DESCRIPTION");
+ else
+ printf("%-25s %-6s %-12s %-18s %-15s\n", "UNIT", "LOAD", "ACTIVE", "SUB", "JOB");
+ }
+
+ for (k = 0; k < c; k++) {
+ const char *dot;
+ struct unit_info *u = unit_infos+k;
+
+ if ((!arg_type || ((dot = strrchr(u->id, '.')) &&
streq(dot+1, arg_type))) &&
- (arg_all || !(streq(active_state, "inactive") || following[0]) || job_id > 0)) {
+ (arg_all || !(streq(u->active_state, "inactive") || u->following[0]) || u->job_id > 0)) {
char *e;
int a = 0, b = 0;
- const char *on, *off;
+ const char *on_loaded, *off_loaded;
+ const char *on_active, *off_active;
- if (streq(active_state, "maintenance")) {
- on = ansi_highlight(true);
- off = ansi_highlight(false);
+ if (!streq(u->load_state, "loaded")) {
+ on_loaded = ansi_highlight(true);
+ off_loaded = ansi_highlight(false);
} else
- on = off = "";
+ on_loaded = off_loaded = "";
+
+ if (streq(u->active_state, "failed")) {
+ on_active = ansi_highlight(true);
+ off_active = ansi_highlight(false);
+ } else
+ on_active = off_active = "";
+
+ e = arg_full ? NULL : ellipsize(u->id, 25, 33);
+
+ printf("%-25s %s%-6s%s %s%-12s %-18s%s%n",
+ e ? e : u->id,
+ on_loaded, u->load_state, off_loaded,
+ on_active, u->active_state, u->sub_state, off_active,
+ &a);
- e = arg_full ? NULL : ellipsize(id, 45, 33);
- printf("%-45s %-6s %s%-12s %-12s%s%n", e ? e : id, load_state, on, active_state, sub_state, off, &a);
free(e);
- a -= strlen(on) + strlen(off);
+ a -= strlen(on_loaded) + strlen(off_loaded);
+ a -= strlen(on_active) + strlen(off_active);
- if (job_id != 0)
- printf(" => %-12s%n", job_type, &b);
+ if (u->job_id != 0)
+ printf(" %-15s%n", u->job_type, &b);
else
b = 1 + 15;
- if (a + b + 2 < columns()) {
- if (job_id == 0)
+ if (a + b + 1 < columns()) {
+ if (u->job_id == 0)
printf(" ");
- printf(" %.*s", columns() - a - b - 2, description);
+ if (arg_full)
+ printf(" %s", u->description);
+ else
+ printf(" %.*s", columns() - a - b - 1, u->description);
}
fputs("\n", stdout);
- k++;
}
-
- dbus_message_iter_next(&sub);
}
if (isatty(STDOUT_FILENO)) {
- printf("\nLOAD = Load State, reflects whether the unit configuration was properly loaded.\n"
- "ACTIVE = Active State, the high-level unit activation state, i.e. generalization of the substate.\n"
- "SUB = Substate, the low-level unit activation state, possible values depend on unit type.\n"
- "JOB = Job, shows pending jobs for the unit.\n");
+ printf("\nLOAD = Reflects whether the unit definition was properly loaded.\n"
+ "ACTIVE = The high-level unit activation state, i.e. generalization of SUB.\n"
+ "SUB = The low-level unit activation state, values depend on unit type.\n"
+ "JOB = Pending job for the unit.\n");
if (arg_all)
- printf("\n%u units listed.\n", k);
+ printf("\n%u units listed.\n", c);
else
- printf("\n%u units listed. Pass --all to see inactive units, too.\n", k);
+ printf("\n%u units listed. Pass --all to see inactive units, too.\n", c);
}
r = 0;
if (reply)
dbus_message_unref(reply);
+ free(unit_infos);
+
dbus_error_free(&error);
return r;
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_iter_recurse(&iter, &sub);
- printf("%4s %-45s %-17s %-7s\n", "JOB", "UNIT", "TYPE", "STATE");
+ if (isatty(STDOUT_FILENO))
+ printf("%4s %-25s %-15s %-7s\n", "JOB", "UNIT", "TYPE", "STATE");
while (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_INVALID) {
const char *name, *type, *state, *job_path, *unit_path;
goto finish;
}
- e = arg_full ? NULL : ellipsize(name, 45, 33);
- printf("%4u %-45s %-17s %-7s\n", id, e ? e : name, type, state);
+ e = arg_full ? NULL : ellipsize(name, 25, 33);
+ printf("%4u %-25s %-15s %-7s\n", id, e ? e : name, type, state);
free(e);
k++;
dbus_message_iter_next(&sub);
}
- printf("\n%u jobs listed.\n", k);
+ if (isatty(STDOUT_FILENO))
+ printf("\n%u jobs listed.\n", k);
+
r = 0;
finish:
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_unref(reply);
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_BOOLEAN, &success,
DBUS_TYPE_INVALID))
- log_error("Failed to parse message: %s", error.message);
+ log_error("Failed to parse message: %s", bus_error_message(&error));
else {
char *p;
&error);
if (dbus_error_is_set(&error)) {
- log_error("Failed to add match: %s", error.message);
+ log_error("Failed to add match: %s", bus_error_message(&error));
dbus_error_free(&error);
return -EIO;
}
goto finish;
}
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!arg_no_block)
- r = wait_for_jobs(bus, s);
+ if ((r = wait_for_jobs(bus, s)) < 0)
+ goto finish;
+
+ r = 1;
finish:
if (s)
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_unref(reply);
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!arg_quiet)
puts(state);
- if (streq(state, "active") || startswith(state, "reloading"))
+ if (streq(state, "active") || streq(state, "reloading"))
r = 0;
dbus_message_unref(m);
const char *path;
const char *default_control_group;
+ usec_t inactive_exit_timestamp;
+ usec_t active_enter_timestamp;
+ usec_t active_exit_timestamp;
+ usec_t inactive_enter_timestamp;
+
bool need_daemon_reload;
/* Service */
pid_t main_pid;
pid_t control_pid;
const char *status_text;
- bool running;
+ bool running:1;
+ bool is_sysv:1;
usec_t start_timestamp;
usec_t exit_timestamp;
static void print_status_info(UnitStatusInfo *i) {
ExecStatusInfo *p;
const char *on, *off, *ss;
+ usec_t timestamp;
+ char since1[FORMAT_TIMESTAMP_PRETTY_MAX], *s1;
+ char since2[FORMAT_TIMESTAMP_MAX], *s2;
assert(i);
ss = streq_ptr(i->active_state, i->sub_state) ? NULL : i->sub_state;
- if (streq_ptr(i->active_state, "maintenance")) {
+ if (streq_ptr(i->active_state, "failed")) {
on = ansi_highlight(true);
off = ansi_highlight(false);
} else if (streq_ptr(i->active_state, "active") || streq_ptr(i->active_state, "reloading")) {
on = off = "";
if (ss)
- printf("\t Active: %s%s (%s)%s\n",
+ printf("\t Active: %s%s (%s)%s",
on,
strna(i->active_state),
ss,
off);
else
- printf("\t Active: %s%s%s\n",
+ printf("\t Active: %s%s%s",
on,
strna(i->active_state),
off);
+ timestamp = (streq_ptr(i->active_state, "active") ||
+ streq_ptr(i->active_state, "reloading")) ? i->active_enter_timestamp :
+ (streq_ptr(i->active_state, "inactive") ||
+ streq_ptr(i->active_state, "failed")) ? i->inactive_enter_timestamp :
+ streq_ptr(i->active_state, "activating") ? i->inactive_exit_timestamp :
+ i->active_exit_timestamp;
+
+ s1 = format_timestamp_pretty(since1, sizeof(since1), timestamp);
+ s2 = format_timestamp(since2, sizeof(since2), timestamp);
+
+ if (s1)
+ printf(" since [%s; %s]\n", s2, s1);
+ else if (s2)
+ printf(" since [%s]\n", s2);
+ else
+ printf("\n");
+
if (i->sysfs_path)
printf("\t Device: %s\n", i->sysfs_path);
else if (i->where)
continue;
t = strv_join(p->argv, " ");
- printf("\t Exited: %u (%s, code=%s, ", p->pid, strna(t), sigchld_code_to_string(p->code));
+ printf("\t Process: %u (%s, code=%s, ", p->pid, strna(t), sigchld_code_to_string(p->code));
free(t);
- if (p->code == CLD_EXITED)
+ if (p->code == CLD_EXITED) {
+ const char *c;
+
printf("status=%i", p->status);
- else
+
+ if ((c = exit_status_to_string(p->status, i->is_sysv ? EXIT_STATUS_LSB : EXIT_STATUS_SYSTEMD)))
+ printf("/%s", c);
+
+ } else
printf("signal=%s", signal_to_string(p->status));
printf(")\n");
printf("\t");
if (i->main_pid > 0) {
- printf(" Main: %u", (unsigned) i->main_pid);
+ printf("Main PID: %u", (unsigned) i->main_pid);
if (i->running) {
char *t = NULL;
} else if (i->exit_code > 0) {
printf(" (code=%s, ", sigchld_code_to_string(i->exit_code));
- if (i->exit_code == CLD_EXITED)
+ if (i->exit_code == CLD_EXITED) {
+ const char *c;
+
printf("status=%i", i->exit_status);
- else
+
+ if ((c = exit_status_to_string(i->exit_status, i->is_sysv ? EXIT_STATUS_LSB : EXIT_STATUS_SYSTEMD)))
+ printf("/%s", c);
+
+ } else
printf("signal=%s", signal_to_string(i->exit_status));
printf(")");
}
i->description = s;
else if (streq(name, "FragmentPath"))
i->path = s;
- else if (streq(name, "SysVPath"))
+ else if (streq(name, "SysVPath")) {
+ i->is_sysv = true;
i->path = s;
- else if (streq(name, "DefaultControlGroup"))
+ } else if (streq(name, "DefaultControlGroup"))
i->default_control_group = s;
else if (streq(name, "StatusText"))
i->status_text = s;
i->start_timestamp = (usec_t) u;
else if (streq(name, "ExecMainExitTimestamp"))
i->exit_timestamp = (usec_t) u;
+ else if (streq(name, "ActiveEnterTimestamp"))
+ i->active_enter_timestamp = (usec_t) u;
+ else if (streq(name, "InactiveEnterTimestamp"))
+ i->inactive_enter_timestamp = (usec_t) u;
+ else if (streq(name, "InactiveExitTimestamp"))
+ i->inactive_exit_timestamp = (usec_t) u;
+ else if (streq(name, "ActiveExitTimestamp"))
+ i->active_exit_timestamp = (usec_t) u;
break;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_iter_next(&sub);
}
- if (!show_properties)
- print_status_info(&info);
+ r = 0;
+
+ if (!show_properties) {
+ if (arg_sysv_compat &&
+ !streq_ptr(info.active_state, "active") &&
+ !streq_ptr(info.active_state, "reloading")) {
+
+ /* If the SysV compatibility mode is on, we
+ * will refuse to run "status" on units that
+ * aren't active */
+ log_error("Unit not active.");
+ r = -EADDRNOTAVAIL;
+ } else
+ print_status_info(&info);
+ }
while ((p = info.exec)) {
LIST_REMOVE(ExecStatusInfo, exec, info.exec, p);
exec_status_info_free(p);
}
- r = 0;
-
finish:
if (m)
dbus_message_unref(m);
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
if (!dbus_error_has_name(&error, DBUS_ERROR_ACCESS_DENIED)) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
DBUS_TYPE_STRING, &id,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID))
- log_error("Failed to parse message: %s", error.message);
+ log_error("Failed to parse message: %s", bus_error_message(&error));
else if (streq(dbus_message_get_member(message), "UnitNew"))
printf("Unit %s added.\n", id);
else
DBUS_TYPE_UINT32, &id,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID))
- log_error("Failed to parse message: %s", error.message);
+ log_error("Failed to parse message: %s", bus_error_message(&error));
else if (streq(dbus_message_get_member(message), "JobNew"))
printf("Job %u added.\n", id);
else
printf("Job %u removed.\n", id);
- } else if (dbus_message_is_signal(message, "org.freedesktop.systemd1.Unit", "Changed") ||
- dbus_message_is_signal(message, "org.freedesktop.systemd1.Job", "Changed")) {
+ } else if (dbus_message_is_signal(message, "org.freedesktop.DBus.Properties", "PropertiesChanged")) {
const char *path, *interface, *property = "Id";
DBusMessageIter iter, sub;
path = dbus_message_get_path(message);
- interface = dbus_message_get_interface(message);
+
+ if (!dbus_message_get_args(message, &error,
+ DBUS_TYPE_STRING, &interface,
+ DBUS_TYPE_INVALID)) {
+ log_error("Failed to parse message: %s", bus_error_message(&error));
+ goto finish;
+ }
+
+ if (!streq(interface, "org.freedesktop.systemd1.Job") &&
+ !streq(interface, "org.freedesktop.systemd1.Unit"))
+ goto finish;
if (!(m = dbus_message_new_method_call(
"org.freedesktop.systemd1",
}
if (!(reply = dbus_connection_send_with_reply_and_block(connection, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
goto finish;
}
&error);
if (dbus_error_is_set(&error)) {
- log_error("Failed to add match: %s", error.message);
- r = -EIO;
- goto finish;
- }
-
- dbus_bus_add_match(bus,
- "type='signal',"
- "sender='org.freedesktop.systemd1',"
- "interface='org.freedesktop.systemd1.Unit',"
- "member='Changed'",
- &error);
-
- if (dbus_error_is_set(&error)) {
- log_error("Failed to add match: %s", error.message);
+ log_error("Failed to add match: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_bus_add_match(bus,
"type='signal',"
"sender='org.freedesktop.systemd1',"
- "interface='org.freedesktop.systemd1.Job',"
- "member='Changed'",
+ "interface='org.freedesktop.DBus.Properties',"
+ "member='PropertiesChanged'",
&error);
if (dbus_error_is_set(&error)) {
- log_error("Failed to add match: %s", error.message);
+ log_error("Failed to add match: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_STRING, &text,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_unref(reply);
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
if (!dbus_message_get_args(reply, &error,
DBUS_TYPE_OBJECT_PATH, &path,
DBUS_TYPE_INVALID)) {
- log_error("Failed to parse reply: %s", error.message);
+ log_error("Failed to parse reply: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
dbus_message_unref(reply);
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
streq(args[0], "clear-jobs") ||
streq(args[0], "cancel") ? "ClearJobs" :
streq(args[0], "daemon-reexec") ? "Reexecute" :
- streq(args[0], "reset-maintenance") ? "ResetMaintenance" :
+ streq(args[0], "reset-failed") ? "ResetFailed" :
streq(args[0], "daemon-exit") ? "Exit" :
"Reload";
}
goto finish;
}
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
return r;
}
-static int reset_maintenance(DBusConnection *bus, char **args, unsigned n) {
+static int reset_failed(DBusConnection *bus, char **args, unsigned n) {
DBusMessage *m = NULL, *reply = NULL;
unsigned i;
int r;
"org.freedesktop.systemd1",
"/org/freedesktop/systemd1",
"org.freedesktop.systemd1.Manager",
- "ResetMaintenanceUnit"))) {
+ "ResetFailedUnit"))) {
log_error("Could not allocate message.");
r = -ENOMEM;
goto finish;
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
}
if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
" otherwise restart if active\n"
" isolate [NAME] Start one unit and stop all others\n"
" is-active [NAME...] Check whether units are active\n"
- " status [NAME...] Show runtime status of one or more units\n"
+ " status [NAME...|PID...] Show runtime status of one or more units\n"
" show [NAME...|JOB...] Show properties of one or more\n"
" units/jobs or the manager\n"
- " reset-maintenance [NAME...] Reset maintenance state for all, one,\n"
- " or more units\n"
+ " reset-failed [NAME...] Reset failed state for all, one, or more\n"
+ " units\n"
" enable [NAME...] Enable one or more unit files\n"
" disable [NAME...] Disable one or more unit files\n"
" is-enabled [NAME...] Check whether unit files are enabled\n"
static int shutdown_help(void) {
- printf("%s [OPTIONS...] [now] [WALL...]\n\n"
+ printf("%s [OPTIONS...] [TIME] [WALL...]\n\n"
"Shut down the system.\n\n"
" --help Show this help\n"
" -H --halt Halt the machine\n"
" -r --reboot Reboot the machine\n"
" -h Equivalent to --poweroff, overriden by --halt\n"
" -k Don't halt/power-off/reboot, just send warnings\n"
- " --no-wall Don't send wall message before halt/power-off/reboot\n",
+ " --no-wall Don't send wall message before halt/power-off/reboot\n"
+ " -c Cancel a pending shutdown\n",
program_invocation_short_name);
return 0;
ARG_FULL,
ARG_FORCE,
ARG_NO_RELOAD,
- ARG_DEFAULTS
+ ARG_DEFAULTS,
+ ARG_SYSV_COMPAT
};
static const struct option options[] = {
{ "require", no_argument, NULL, ARG_REQUIRE },
{ "force", no_argument, NULL, ARG_FORCE },
{ "no-reload", no_argument, NULL, ARG_NO_RELOAD },
- { "defaults", no_argument, NULL, ARG_DEFAULTS },
+ { "defaults", no_argument, NULL, ARG_DEFAULTS },
+ { "sysv-compat", no_argument, NULL, ARG_SYSV_COMPAT },
{ NULL, 0, NULL, 0 }
};
arg_defaults = true;
break;
+ case ARG_SYSV_COMPAT:
+ arg_sysv_compat = true;
+ break;
+
case '?':
return -EINVAL;
return 1;
}
+static int parse_time_spec(const char *t, usec_t *_u) {
+ assert(t);
+ assert(_u);
+
+ if (streq(t, "now"))
+ *_u = 0;
+ else if (t[0] == '+') {
+ uint64_t u;
+
+ if (safe_atou64(t + 1, &u) < 0)
+ return -EINVAL;
+
+ *_u = now(CLOCK_REALTIME) + USEC_PER_MINUTE * u;
+ } else {
+ char *e = NULL;
+ long hour, minute;
+ struct tm tm;
+ time_t s;
+ usec_t n;
+
+ errno = 0;
+ hour = strtol(t, &e, 10);
+ if (errno != 0 || *e != ':' || hour < 0 || hour > 23)
+ return -EINVAL;
+
+ minute = strtol(e+1, &e, 10);
+ if (errno != 0 || *e != 0 || minute < 0 || minute > 59)
+ return -EINVAL;
+
+ n = now(CLOCK_REALTIME);
+ s = (time_t) (n / USEC_PER_SEC);
+
+ zero(tm);
+ assert_se(localtime_r(&s, &tm));
+
+ tm.tm_hour = (int) hour;
+ tm.tm_min = (int) minute;
+ tm.tm_sec = 0;
+
+ assert_se(s = mktime(&tm));
+
+ *_u = (usec_t) s * USEC_PER_SEC;
+
+ while (*_u <= n)
+ *_u += USEC_PER_DAY;
+ }
+
+ return 0;
+}
+
static int shutdown_parse_argv(int argc, char *argv[]) {
enum {
{ NULL, 0, NULL, 0 }
};
- int c;
+ int c, r;
assert(argc >= 0);
assert(argv);
- while ((c = getopt_long(argc, argv, "HPrhkt:a", options, NULL)) >= 0) {
+ while ((c = getopt_long(argc, argv, "HPrhkt:afFc", options, NULL)) >= 0) {
switch (c) {
case ARG_HELP:
/* Compatibility nops */
break;
+ case 'c':
+ arg_action = ACTION_CANCEL_SHUTDOWN;
+ break;
+
case '?':
return -EINVAL;
}
}
- if (argc > optind && !streq(argv[optind], "now"))
- log_warning("First argument '%s' isn't 'now'. Ignoring.", argv[optind]);
+ if (argc > optind) {
+ if ((r = parse_time_spec(argv[optind], &arg_when)) < 0) {
+ log_error("Failed to parse time specification: %s", argv[optind]);
+ return r;
+ }
+ } else
+ arg_when = now(CLOCK_REALTIME) + USEC_PER_MINUTE;
- /* We ignore the time argument */
+ /* We skip the time argument */
if (argc > optind + 1)
arg_wall = argv + optind + 1;
goto finish;
}
- log_error("Failed to connect to Upstart bus: %s", error.message);
+ log_error("Failed to connect to Upstart bus: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
goto finish;
}
- log_error("Failed to issue method call: %s", error.message);
+ log_error("Failed to issue method call: %s", bus_error_message(&error));
r = -EIO;
goto finish;
}
{ "default", EQUAL, 1, start_special },
{ "rescue", EQUAL, 1, start_special },
{ "emergency", EQUAL, 1, start_special },
- { "reset-maintenance", MORE, 1, reset_maintenance },
+ { "reset-failed", MORE, 1, reset_failed },
{ "enable", MORE, 2, enable_unit },
{ "disable", MORE, 2, enable_unit },
{ "is-enabled", MORE, 2, enable_unit }
return verbs[i].dispatch(bus, argv + optind, left);
}
+static int send_shutdownd(usec_t t, char mode, bool warn, const char *message) {
+ int fd = -1;
+ struct msghdr msghdr;
+ struct iovec iovec;
+ union sockaddr_union sockaddr;
+ struct ucred *ucred;
+ union {
+ struct cmsghdr cmsghdr;
+ uint8_t buf[CMSG_SPACE(sizeof(struct ucred))];
+ } control;
+ struct shutdownd_command c;
+
+ zero(c);
+ c.elapse = t;
+ c.mode = mode;
+ c.warn_wall = warn;
+
+ if (message)
+ strncpy(c.wall_message, message, sizeof(c.wall_message));
+
+ if ((fd = socket(AF_UNIX, SOCK_DGRAM|SOCK_CLOEXEC, 0)) < 0)
+ return -errno;
+
+ zero(sockaddr);
+ sockaddr.sa.sa_family = AF_UNIX;
+ sockaddr.un.sun_path[0] = 0;
+ strncpy(sockaddr.un.sun_path+1, "/org/freedesktop/systemd1/shutdownd", sizeof(sockaddr.un.sun_path)-1);
+
+ zero(iovec);
+ iovec.iov_base = (char*) &c;
+ iovec.iov_len = sizeof(c);
+
+ zero(control);
+ control.cmsghdr.cmsg_level = SOL_SOCKET;
+ control.cmsghdr.cmsg_type = SCM_CREDENTIALS;
+ control.cmsghdr.cmsg_len = CMSG_LEN(sizeof(struct ucred));
+
+ ucred = (struct ucred*) CMSG_DATA(&control.cmsghdr);
+ ucred->pid = getpid();
+ ucred->uid = getuid();
+ ucred->gid = getgid();
+
+ zero(msghdr);
+ msghdr.msg_name = &sockaddr;
+ msghdr.msg_namelen = sizeof(sa_family_t) + 1 + sizeof("/org/freedesktop/systemd1/shutdownd") - 1;
+
+ msghdr.msg_iov = &iovec;
+ msghdr.msg_iovlen = 1;
+ msghdr.msg_control = &control;
+ msghdr.msg_controllen = control.cmsghdr.cmsg_len;
+
+ if (sendmsg(fd, &msghdr, MSG_NOSIGNAL) < 0) {
+ close_nointr_nofail(fd);
+ return -errno;
+ }
+
+ close_nointr_nofail(fd);
+ return 0;
+}
+
static int reload_with_fallback(DBusConnection *bus) {
if (bus) {
/* Nothing else worked, so let's try
* /dev/initctl */
- if (talk_initctl() != 0)
+ if (talk_initctl() > 0)
goto done;
log_error("Failed to talk to init daemon.");
int r;
if (geteuid() != 0) {
- log_error("Must to be root.");
+ log_error("Must be root.");
return -EPERM;
}
+ if (arg_when > 0) {
+ char *m;
+ char date[FORMAT_TIMESTAMP_MAX];
+
+ m = strv_join(arg_wall, " ");
+ r = send_shutdownd(arg_when,
+ arg_action == ACTION_HALT ? 'H' :
+ arg_action == ACTION_POWEROFF ? 'P' :
+ 'r',
+ !arg_no_wall,
+ m);
+ free(m);
+
+ if (r < 0)
+ log_warning("Failed to talk to shutdownd, proceeding with immediate shutdown: %s", strerror(-r));
+ else {
+ log_info("Shutdown scheduled for %s, use 'shutdown -c' to cancel.",
+ format_timestamp(date, sizeof(date), arg_when));
+ return 0;
+ }
+ }
+
if (!arg_dry && !arg_immediate)
return start_with_fallback(bus);
- if (!arg_no_wtmp)
- if ((r = utmp_put_shutdown(0)) < 0)
+ if (!arg_no_wtmp) {
+ if (sd_booted() > 0)
+ log_debug("Not writing utmp record, assuming that systemd-update-utmp is used.");
+ else if ((r = utmp_put_shutdown(0)) < 0)
log_warning("Failed to write utmp record: %s", strerror(-r));
+ }
if (!arg_no_sync)
sync();
dbus_error_init(&error);
log_parse_environment();
+ log_open();
if ((r = parse_argv(argc, argv)) < 0)
goto finish;
retval = reload_with_fallback(bus) < 0;
break;
+ case ACTION_CANCEL_SHUTDOWN:
+ retval = send_shutdownd(0, 0, false, NULL) < 0;
+ break;
+
case ACTION_INVALID:
case ACTION_RUNLEVEL:
default:
~ianmdlvl / elogind.git / blobdiff