chiark / gitweb /
systemctl: introduce reset-maintenance command
[elogind.git] / src / systemctl.c
index 6388d231df5f6b85fa99de3df1a2d8fcbeadc52b..acb89a5a8767719027acaf279dd5d3f47dbd9652 100644 (file)
@@ -188,7 +188,8 @@ static int list_units(DBusConnection *bus, char **args, unsigned n) {
 
         dbus_message_iter_recurse(&iter, &sub);
 
-        printf("%-45s %-6s %-12s %-12s %-15s %s\n", "UNIT", "LOAD", "ACTIVE", "SUB", "JOB", "DESCRIPTION");
+        if (isatty(STDOUT_FILENO))
+                printf("%-45s %-6s %-12s %-12s %-15s %s\n", "UNIT", "LOAD", "ACTIVE", "SUB", "JOB", "DESCRIPTION");
 
         while (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_INVALID) {
                 const char *id, *description, *load_state, *active_state, *sub_state, *unit_path, *job_type, *job_path, *dot;
@@ -218,7 +219,7 @@ static int list_units(DBusConnection *bus, char **args, unsigned n) {
 
                 if ((!arg_type || ((dot = strrchr(id, '.')) &&
                                    streq(dot+1, arg_type))) &&
-                    (arg_all || !streq(active_state, "inactive"))) {
+                    (arg_all || !streq(active_state, "inactive") || job_id > 0)) {
 
                         int a = 0, b = 0;
 
@@ -228,7 +229,7 @@ static int list_units(DBusConnection *bus, char **args, unsigned n) {
                         printf("%-45s %-6s %-12s %-12s%n", id, load_state, active_state, sub_state, &a);
 
                         if (job_id != 0)
-                                printf(" %-15s%n", job_type, &b);
+                                printf(" => %-12s%n", job_type, &b);
                         else
                                 b = 1 + 15;
 
@@ -249,10 +250,18 @@ static int list_units(DBusConnection *bus, char **args, unsigned n) {
                 dbus_message_iter_next(&sub);
         }
 
-        if (arg_all)
-                printf("\n%u units listed.\n", k);
-        else
-                printf("\n%u units listed. Pass --all to see inactive units, too.\n", k);
+        if (isatty(STDOUT_FILENO)) {
+
+                printf("\nLOAD   = Load State, reflects whether the unit configuration was properly loaded.\n"
+                       "ACTIVE = Active State, the high-level unit activation state, i.e. generalization of the substate.\n"
+                       "SUB    = Substate, the low-level unit activation state, possible values depend on unit type.\n"
+                       "JOB    = Job, shows pending jobs for the unit.\n");
+
+                if (arg_all)
+                        printf("\n%u units listed.\n", k);
+                else
+                        printf("\n%u units listed. Pass --all to see inactive units, too.\n", k);
+        }
 
         r = 0;
 
@@ -737,6 +746,77 @@ finish:
         return r;
 }
 
+static bool unit_need_daemon_reload(DBusConnection *bus, const char *unit) {
+        DBusMessage *m, *reply;
+        dbus_bool_t b = FALSE;
+        DBusMessageIter iter, sub;
+        const char
+                *interface = "org.freedesktop.systemd1.Unit",
+                *property = "NeedDaemonReload",
+                *path;
+
+        /* We ignore all errors here, since this is used to show a warning only */
+
+        if (!(m = dbus_message_new_method_call(
+                              "org.freedesktop.systemd1",
+                              "/org/freedesktop/systemd1",
+                              "org.freedesktop.systemd1.Manager",
+                              "GetUnit")))
+                goto finish;
+
+        if (!dbus_message_append_args(m,
+                                      DBUS_TYPE_STRING, &unit,
+                                      DBUS_TYPE_INVALID))
+                goto finish;
+
+        if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, NULL)))
+                goto finish;
+
+        if (!dbus_message_get_args(reply, NULL,
+                                   DBUS_TYPE_OBJECT_PATH, &path,
+                                   DBUS_TYPE_INVALID))
+                goto finish;
+
+        dbus_message_unref(m);
+        if (!(m = dbus_message_new_method_call(
+                              "org.freedesktop.systemd1",
+                              path,
+                              "org.freedesktop.DBus.Properties",
+                              "Get")))
+                goto finish;
+
+        if (!dbus_message_append_args(m,
+                                      DBUS_TYPE_STRING, &interface,
+                                      DBUS_TYPE_STRING, &property,
+                                      DBUS_TYPE_INVALID)) {
+                goto finish;
+        }
+
+        dbus_message_unref(reply);
+        if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, NULL)))
+                goto finish;
+
+        if (!dbus_message_iter_init(reply, &iter) ||
+            dbus_message_iter_get_arg_type(&iter) != DBUS_TYPE_VARIANT)
+                goto finish;
+
+        dbus_message_iter_recurse(&iter, &sub);
+
+        if (dbus_message_iter_get_arg_type(&sub) != DBUS_TYPE_BOOLEAN)
+                goto finish;
+
+        dbus_message_iter_get_basic(&sub, &b);
+
+finish:
+        if (m)
+                dbus_message_unref(m);
+
+        if (reply)
+                dbus_message_unref(reply);
+
+        return b;
+}
+
 typedef struct WaitData {
         Set *set;
         bool failed;
@@ -855,6 +935,7 @@ static int start_unit_one(
 
         DBusMessage *m = NULL, *reply = NULL;
         DBusError error;
+        const char *path;
         int r;
 
         assert(bus);
@@ -898,18 +979,21 @@ static int start_unit_one(
                 goto finish;
         }
 
+        if (!dbus_message_get_args(reply, &error,
+                                   DBUS_TYPE_OBJECT_PATH, &path,
+                                   DBUS_TYPE_INVALID)) {
+                log_error("Failed to parse reply: %s", error.message);
+                r = -EIO;
+                goto finish;
+        }
+
+        if (unit_need_daemon_reload(bus, name))
+                log_warning("Unit file of created job changed on disk, 'systemctl %s daemon-reload' recommended.",
+                            arg_session ? "--session" : "--system");
+
         if (!arg_no_block) {
-                const char *path;
                 char *p;
 
-                if (!dbus_message_get_args(reply, &error,
-                                           DBUS_TYPE_OBJECT_PATH, &path,
-                                           DBUS_TYPE_INVALID)) {
-                        log_error("Failed to parse reply: %s", error.message);
-                        r = -EIO;
-                        goto finish;
-                }
-
                 if (!(p = strdup(path))) {
                         log_error("Failed to duplicate path.");
                         r = -ENOMEM;
@@ -1282,6 +1366,8 @@ typedef struct UnitStatusInfo {
         const char *fragment_path;
         const char *default_control_group;
 
+        bool need_daemon_reload;
+
         /* Service */
         pid_t main_pid;
         pid_t control_pid;
@@ -1444,6 +1530,10 @@ static void print_status_info(UnitStatusInfo *i) {
 
                 show_cgroup_by_path(i->default_control_group, "\t\t  ", c);
         }
+
+        if (i->need_daemon_reload)
+                printf("\n" ANSI_HIGHLIGHT_ON "Warning:" ANSI_HIGHLIGHT_OFF " Unit file changed on disk, 'systemctl %s daemon-reload' recommended.\n",
+                       arg_session ? "--session" : "--system");
 }
 
 static int status_property(const char *name, DBusMessageIter *iter, UnitStatusInfo *i) {
@@ -1490,6 +1580,8 @@ static int status_property(const char *name, DBusMessageIter *iter, UnitStatusIn
 
                 if (streq(name, "Accept"))
                         i->accept = b;
+                else if (streq(name, "NeedDaemonReload"))
+                        i->need_daemon_reload = b;
 
                 break;
         }
@@ -2547,10 +2639,11 @@ static int clear_jobs(DBusConnection *bus, char **args, unsigned n) {
                 assert(arg_action == ACTION_SYSTEMCTL);
 
                 method =
-                        streq(args[0], "clear-jobs")    ? "ClearJobs" :
-                        streq(args[0], "daemon-reload") ? "Reload" :
-                        streq(args[0], "daemon-reexec") ? "Reexecute" :
-                                                          "Exit";
+                        streq(args[0], "clear-jobs")        ? "ClearJobs" :
+                        streq(args[0], "daemon-reload")     ? "Reload" :
+                        streq(args[0], "daemon-reexec")     ? "Reexecute" :
+                        streq(args[0], "reset-maintenance") ? "ResetMaintenance" :
+                                                              "Exit";
         }
 
         if (!(m = dbus_message_new_method_call(
@@ -2590,6 +2683,63 @@ finish:
         return r;
 }
 
+static int reset_maintenance(DBusConnection *bus, char **args, unsigned n) {
+        DBusMessage *m = NULL, *reply = NULL;
+        unsigned i;
+        int r;
+        DBusError error;
+
+        assert(bus);
+        dbus_error_init(&error);
+
+        if (n <= 1)
+                return clear_jobs(bus, args, n);
+
+        for (i = 1; i < n; i++) {
+
+                if (!(m = dbus_message_new_method_call(
+                                      "org.freedesktop.systemd1",
+                                      "/org/freedesktop/systemd1",
+                                      "org.freedesktop.systemd1.Manager",
+                                      "ResetMaintenanceUnit"))) {
+                        log_error("Could not allocate message.");
+                        r = -ENOMEM;
+                        goto finish;
+                }
+
+                if (!dbus_message_append_args(m,
+                                              DBUS_TYPE_STRING, args + i,
+                                              DBUS_TYPE_INVALID)) {
+                        log_error("Could not append arguments to message.");
+                        r = -ENOMEM;
+                        goto finish;
+                }
+
+                if (!(reply = dbus_connection_send_with_reply_and_block(bus, m, -1, &error))) {
+                        log_error("Failed to issue method call: %s", error.message);
+                        r = -EIO;
+                        goto finish;
+                }
+
+                dbus_message_unref(m);
+                dbus_message_unref(reply);
+                m = reply = NULL;
+        }
+
+        r = 0;
+
+finish:
+        if (m)
+                dbus_message_unref(m);
+
+        if (reply)
+                dbus_message_unref(reply);
+
+        dbus_error_free(&error);
+
+        return r;
+}
+
 static int show_enviroment(DBusConnection *bus, char **args, unsigned n) {
         DBusMessage *m = NULL, *reply = NULL;
         DBusError error;
@@ -2740,7 +2890,7 @@ finish:
 static int systemctl_help(void) {
 
         printf("%s [OPTIONS...] {COMMAND} ...\n\n"
-               "Send control commands to the systemd manager.\n\n"
+               "Send control commands to or query the systemd manager.\n\n"
                "  -h --help          Show this help\n"
                "  -t --type=TYPE     List only units of a particular type\n"
                "  -p --property=NAME Show only properties by this name\n"
@@ -2770,6 +2920,8 @@ static int systemctl_help(void) {
                "  status [NAME...]                Show status of one or more units\n"
                "  show [NAME...|JOB...]           Show properties of one or more\n"
                "                                  units/jobs/manager\n"
+               "  reset-maintenance [NAME...]     Reset maintenance state for all, one\n"
+               "                                  or more units\n"
                "  load [NAME...]                  Load one or more units\n"
                "  list-jobs                       List jobs\n"
                "  cancel [JOB...]                 Cancel one or more jobs\n"
@@ -3487,6 +3639,7 @@ static int systemctl_main(DBusConnection *bus, int argc, char *argv[]) {
                 { "default",           EQUAL, 1, start_special   },
                 { "rescue",            EQUAL, 1, start_special   },
                 { "emergency",         EQUAL, 1, start_special   },
+                { "reset-maintenance", MORE,  1, reset_maintenance },
         };
 
         int left;