<filename><replaceable>target</replaceable>.target</filename>,
<filename><replaceable>path</replaceable>.path</filename>,
<filename><replaceable>timer</replaceable>.timer</filename>,
- <filename><replaceable>snapshot</replaceable>.snapshot</filename></para>
+ <filename><replaceable>snapshot</replaceable>.snapshot</filename>,
+ <filename><replaceable>slice</replaceable>.slice</filename>,
+ <filename><replaceable>scope</replaceable>.scope</filename></para>
<para><literallayout><filename>/etc/systemd/system/*</filename>
<filename>/run/systemd/system/*</filename>
<filename>...</filename>
</literallayout></para>
- <para><literallayout><filename>/etc/systemd/user/*</filename>
+ <para><literallayout><filename>$HOME/.config/systemd/user/*</filename>
+<filename>/etc/systemd/user/*</filename>
<filename>/run/systemd/user/*</filename>
<filename>/usr/lib/systemd/user/*</filename>
<filename>...</filename>
<para>A unit configuration file encodes information
about a service, a socket, a device, a mount point, an
automount point, a swap file or partition, a start-up
- target, a file system path, or a timer controlled and
- supervised by
- <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>. The
- syntax is inspired by <ulink
+ target, a watched file system path, a timer controlled
+ and supervised by
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ a temporary system state snapshot, a resource
+ management slice or a group of externally created
+ processes. The syntax is inspired by <ulink
url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG
- Desktop Entry Specification</ulink> <filename>.desktop</filename> files, which are in turn
+ Desktop Entry Specification</ulink>
+ <filename>.desktop</filename> files, which are in turn
inspired by Microsoft Windows
<filename>.ini</filename> files.</para>
<citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.snapshot</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
+ <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>Unit files are loaded from a set of paths
<para>Unit files may contain additional options on top
of those listed here. If systemd encounters an unknown
- option it will write a warning log message but
+ option, it will write a warning log message but
continue loading the unit. If an option is prefixed
- with <option>X-</option> it is ignored completely by
+ with <option>X-</option>, it is ignored completely by
systemd. Applications may use this to include
additional information in the unit files.</para>
written in various formats. For positive settings the
strings <option>1</option>, <option>yes</option>,
<option>true</option> and <option>on</option> are
- equivalent. For negative settings the strings
+ equivalent. For negative settings, the strings
<option>0</option>, <option>no</option>,
<option>false</option> and <option>off</option> are
equivalent.</para>
space character. This may be used to wrap long lines.</para>
<para>Along with a unit file
- <filename>foo.service</filename> the directory
+ <filename>foo.service</filename>, the directory
<filename>foo.service.wants/</filename> may exist. All
unit files symlinked from such a directory are
implicitly added as dependencies of type
<varname>Wanted=</varname> to the unit. This is useful
to hook units into the start-up of other units,
without having to modify their unit files. For details
- about the semantics of <varname>Wanted=</varname> see
+ about the semantics of <varname>Wanted=</varname>, see
below. The preferred way to create symlinks in the
<filename>.wants/</filename> directory of a unit file
is with the <command>enable</command> command of the
<filename>.requires/</filename> in this case.</para>
<para>Along with a unit file
- <filename>foo.service</filename> a directory
+ <filename>foo.service</filename>, a directory
<filename>foo.service.d/</filename> may exist. All
- files with the suffix <filename>.conf</filename> from
+ files with the suffix <literal>.conf</literal> from
this directory will be parsed after the file itself is
parsed. This is useful to alter or add configuration
settings to a unit, without having to modify their
file system namespace. Example: a device unit
<filename>dev-sda.device</filename> refers to a device
with the device node <filename noindex='true'>/dev/sda</filename> in
- the file system namespace. If this applies a special
+ the file system namespace. If this applies, a special
way to escape the path name is used, so that the
result is usable as part of a filename. Basically,
given a path, "/" is replaced by "-", and all
<para>Optionally, units may be instantiated from a
template file at runtime. This allows creation of
multiple units from a single configuration file. If
- systemd looks for a unit configuration file it will
+ systemd looks for a unit configuration file, it will
first search for the literal unit name in the
filesystem. If that yields no success and the unit
name contains an <literal>@</literal> character, systemd will look for a
configuration options. See below for details.</para>
<para>If a unit file is empty (i.e. has the file size
- 0) or is symlinked to <filename>/dev/null</filename>
+ 0) or is symlinked to <filename>/dev/null</filename>,
its configuration will not be loaded and it appears
with a load state of <literal>masked</literal>, and
cannot be activated. Use this as an effective way to
<para>Unit files are loaded from a set of paths
determined during compilation, described in the two
- tables below. Unit files found in directories higher
- in the hierarchy override files with the same name
- lower in the hierarchy, thus allowing overrides.
- </para>
+ tables below. Unit files found in directories listed
+ earlier override files with the same name in
+ directories lower in the list.</para>
<para>When systemd is running in user mode
(<option>--user</option>) and the variable
</row>
</thead>
<tbody>
- <row>
- <entry><filename>/run/systemd/generator.early</filename></entry>
- <entry>Generated units (early)</entry>
- </row>
<row>
<entry><filename>/etc/systemd/system</filename></entry>
<entry>Local configuration</entry>
</row>
<row>
- <entry><filename>/run/systemd/systemd</filename></entry>
- <entry>Volatile units</entry>
- </row>
- <row>
- <entry><filename>/run/systemd/generator</filename></entry>
- <entry>Generated units (middle)</entry>
- </row>
- <row>
- <entry><filename>/usr/local/lib/systemd/system</filename></entry>
- <entry>Units for local packages</entry>
+ <entry><filename>/run/systemd/system</filename></entry>
+ <entry>Runtime units</entry>
</row>
<row>
<entry><filename>/usr/lib/systemd/system</filename></entry>
- <entry>Units for installed packages</entry>
- </row>
- <row>
- <entry><filename>/run/systemd/generator.late</filename></entry>
- <entry>Generated units (late)</entry>
+ <entry>Units of installed packages</entry>
</row>
</tbody>
</tgroup>
<table>
<title>
- Load path when running in session mode (<option>--user</option>).
+ Load path when running in user mode (<option>--user</option>).
</title>
<tgroup cols='2'>
</thead>
<tbody>
<row>
- <entry><filename>/tmp/systemd-generator.early.<replaceable>XXXXXX</replaceable></filename></entry>
- <entry>Generated units (early)</entry>
+ <entry><filename>$HOME/.config/systemd/user</filename></entry>
+ <entry>User configuration</entry>
</row>
<row>
<entry><filename>/etc/systemd/user</filename></entry>
</row>
<row>
<entry><filename>/run/systemd/user</filename></entry>
- <entry>Volatile units</entry>
- </row>
- <row>
- <entry><filename>/tmp/systemd-generator.<replaceable>XXXXXX</replaceable></filename></entry>
- <entry>Generated units (middle)</entry>
- </row>
- <row>
- <entry><filename>/usr/local/lib/systemd/user</filename></entry>
- <entry>Units for local packages</entry>
+ <entry>Runtime units</entry>
</row>
<row>
<entry><filename>/usr/lib/systemd/user</filename></entry>
- <entry>Units for installed packages</entry>
- </row>
- <row>
- <entry><filename>/tmp/systemd-generator.late.<replaceable>XXXXXX</replaceable></filename></entry>
- <entry>Generated units (late)</entry>
+ <entry>Units of installed packages</entry>
</row>
</tbody>
</tgroup>
<para>Additional units might be loaded into systemd
("linked") from directories not on the unit load
path. See the <command>link</command> command for
- <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. Also,
+ some units are dynamically created via generators
+ <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/Generators/">Generators</ulink>.
</para>
</refsect1>
describing the unit. This is intended
for use in UIs to show descriptive
information along with the unit
- name.</para></listitem>
+ name. The description should contain a name
+ that means something to the end user.
+ <literal>Apache2 Web Server</literal> is a good
+ example. Bad examples are
+ <literal>high-performance light-weight HTTP
+ server</literal> (too generic) or
+ <literal>Apache2</literal> (too specific and
+ meaningless for people who do not know
+ Apache).</para></listitem>
</varlistentry>
<varlistentry>
the start-up was pulled in indirectly
by some dependency or automatic
start-up of units that is not
- requested by the user this dependency
+ requested by the user, this dependency
must be fulfilled and otherwise the
transaction fails. Hence, this option
may be used to configure dependencies
type <varname>After=</varname> or
<varname>Before=</varname>. If two
units have no ordering dependencies
- between them they are shut down
+ between them, they are shut down
or started up simultaneously, and
no ordering takes
place. </para></listitem>
<term><varname>OnFailureIsolate=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option> the
+ argument. If <option>true</option>, the
unit listed in
<varname>OnFailure=</varname> will be
enqueued in isolation mode, i.e. all
units that are not its dependency will
- be stopped. If this is set only a
+ be stopped. If this is set, only a
single unit may be listed in
<varname>OnFailure=</varname>. Defaults
to
<term><varname>IgnoreOnIsolate=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
this unit will not be stopped when
isolating another unit. Defaults to
<option>false</option>.</para></listitem>
<term><varname>IgnoreOnSnapshot=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
this unit will not be included in
snapshots. Defaults to
<option>true</option> for device and
<term><varname>StopWhenUnneeded=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
this unit will be stopped when it is
no longer used. Note that in order to
minimize the work to be executed,
<term><varname>RefuseManualStop=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
this unit can only be activated
or deactivated indirectly. In
- this case explicit start-up
+ this case, explicit start-up
or termination requested by the
user is denied, however if it is
started or stopped as a
<term><varname>AllowIsolate=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
this unit may be used with the
<command>systemctl isolate</command>
- command. Otherwise this will be
+ command. Otherwise, this will be
refused. It probably is a good idea to
leave this disabled except for target
units that shall be used similar to
<term><varname>DefaultDependencies=</varname></term>
<listitem><para>Takes a boolean
- argument. If <option>true</option>
+ argument. If <option>true</option>,
(the default), a few default
dependencies will implicitly be
created for the unit. The actual
highly recommended to leave this
option enabled for the majority of
common units. If set to
- <option>false</option> this option
+ <option>false</option>, this option
does not disable all implicit
dependencies, just non-essential
ones.</para></listitem>
<listitem><para>When clients are
waiting for a job of this unit to
complete, time out after the specified
- time. If this time limit is reached
+ time. If this time limit is reached,
the job will be cancelled, the unit
however will not change state or even
enter the <literal>failed</literal>
<listitem><para>Before starting a unit
verify that the specified condition is
- true. If it is not true the starting
+ true. If it is not true, the starting
of the unit will be skipped, however
all ordering dependencies of it are
still respected. A failing condition
a file existence condition is
checked before a unit is started. If
the specified absolute path name does
- not exist the condition will
+ not exist, the condition will
fail. If the absolute path name passed
to
<varname>ConditionPathExists=</varname>
<varname>xen</varname>,
<varname>bochs</varname>,
<varname>chroot</varname>,
+ <varname>uml</varname>,
<varname>openvz</varname>,
<varname>lxc</varname>,
<varname>lxc-libvirt</varname>,
<varname>systemd-nspawn</varname> to
test against a specific
implementation. If multiple
- virtualization technologies are nested
+ virtualization technologies are nested,
only the innermost is considered. The
test may be negated by prepending an
exclamation mark.</para>
battery powered at the time of
activation of the unit. This takes a
boolean argument. If set to
- <varname>true</varname> the condition
+ <varname>true</varname>, the condition
will hold only if at least one AC
connector of the system is connected
to a power source, or if no AC
connectors are known. Conversely, if
- set to <varname>false</varname> the
+ set to <varname>false</varname>, the
condition will hold only if there is
at least one AC connector known and
all AC connectors are disconnected
be used to add a constant condition
check value to the unit. It takes a
boolean argument. If set to
- <varname>false</varname> the condition
+ <varname>false</varname>, the condition
will always fail, otherwise
succeed.</para>
<para>If multiple conditions are
- specified the unit will be executed if
+ specified, the unit will be executed if
all of them apply (i.e. a logical AND
is applied). Condition checks can be
prefixed with a pipe symbol (|) in
which case a condition becomes a
triggering condition. If at least one
triggering condition is defined for a
- unit then the unit will be executed if
+ unit, then the unit will be executed if
at least one of the triggering
conditions apply and all of the
non-triggering conditions. If you
prefix an argument with the pipe
- symbol and an exclamation mark the
+ symbol and an exclamation mark, the
pipe symbol must be passed first, the
exclamation second. Except for
<varname>ConditionPathIsSymbolicLink=</varname>,
all path checks follow symlinks. If
any of these options is assigned the
- empty string the list of conditions is
+ empty string, the list of conditions is
reset completely, all previous
condition settings (of any kind) will
have no effect.</para></listitem>
<term><varname>WantedBy=</varname></term>
<term><varname>RequiredBy=</varname></term>
- <listitem><para>Installs a symlink in
- the <filename>.wants/</filename>
- or <filename>.requires/</filename>
- subdirectory for a unit, respectively. This has the
- effect that when the listed unit name
- is activated the unit listing it is
- activated
- too. <command>WantedBy=foo.service</command>
+ <listitem><para>A symbolic link is
+ created in the
+ <filename>.wants/</filename> or
+ <filename>.requires/</filename> directory
+ of the listed unit when this unit is
+ activated by <command>systemctl
+ enable</command>. This has the effect
+ that a dependency of type
+ <varname>Wants=</varname> or
+ <varname>Requires=</varname> is added
+ from the listed unit to the current
+ unit. The primary result is that the
+ current unit will be started when the
+ listed unit is started. See the
+ description of
+ <varname>Wants=</varname> and
+ <varname>Requires=</varname> in the
+ [Unit] section for details.</para>
+
+ <para><command>WantedBy=foo.service</command>
in a service
<filename>bar.service</filename> is
mostly equivalent to
<command>Alias=foo.service.wants/bar.service</command>
- in the same file.</para></listitem>
+ in the same file. In case of template
+ units, <command>systemctl enable</command>
+ must be called with an instance name, and
+ this instance will be added to the
+ <filename>.wants/</filename> or
+ <filename>.requires/</filename> list
+ of the listed unit.
+ E.g. <command>WantedBy=getty.target</command>
+ in a service
+ <filename>getty@.service</filename>
+ will result in <command>systemctl
+ enable getty@tty2.service</command>
+ creating a
+ <filename>getty.target.wants/getty@tty2.service</filename>
+ link to <filename>getty@.service</filename>.
+ </para></listitem>
</varlistentry>
<varlistentry>
</variablelist>
<para>The following specifiers are interpreted in the
- Install section: %n, %N, %p, %i, %U, %u, %m, %H, %b.
+ Install section: %n, %N, %p, %i, %U, %u, %m, %H, %b, %v.
For their meaning see the next section.
</para>
</refsect1>
<entry>Host name</entry>
<entry>The hostname of the running system.</entry>
</row>
+ <row>
+ <entry><literal>%v</literal></entry>
+ <entry>Kernel release</entry>
+ <entry>Identical to <command>uname -r</command> output.</entry>
+ </row>
<row>
<entry><literal>%%</literal></entry>
<entry>Escaped %</entry>
<citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.snapshot</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>uname</refentrytitle><manvolnum>1</manvolnum></citerefentry>
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff