Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<refnamediv>
<refname>systemd.socket</refname>
- <refpurpose>systemd socket configuration files</refpurpose>
+ <refpurpose>Socket unit configuration</refpurpose>
</refnamediv>
<refsynopsisdiv>
- <para><filename>systemd.socket</filename></para>
+ <para><filename><replaceable>socket</replaceable>.socket</filename></para>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>A unit configuration file whose name ends in
- <filename>.socket</filename> encodes information about
+ <literal>.socket</literal> encodes information about
an IPC or network socket or a file system FIFO
controlled and supervised by systemd, for socket-based
activation.</para>
<option>ExecStartPre=</option>,
<option>ExecStartPost=</option>,
<option>ExecStopPre=</option> and
- <option>ExecStoptPost=</option> commands are executed
- in.</para>
-
- <para>For each socket file a matching service file
- (see
+ <option>ExecStopPost=</option> commands are executed
+ in, and in
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ which define the way the processes are terminated, and
+ in
+ <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ which configure resource control settings for the
+ processes of the socket.</para>
+
+ <para>For each socket file, a matching service file
+ must exist, describing the service to start on
+ incoming traffic on the socket (see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- for details) must exist, describing the service to
- start on incoming traffic on the socket. Depending on
- the setting of <option>Accept=</option> (see below),
- this must either be named like the socket unit, but
- with the suffix replaced; or it must be a template
- file named the same way. Example: a socket file
+ for more information about .service files). The name
+ of the .service unit is by default the same as the
+ name of the .socket unit, but can be altered with the
+ <option>Service=</option> option described below.
+ Depending on the setting of the <option>Accept=</option>
+ option described below, this .service unit must either
+ be named like the .socket unit, but with the suffix
+ replaced, unless overridden with
+ <option>Service=</option>; or it must be a template
+ unit named the same way. Example: a socket file
<filename>foo.socket</filename> needs a matching
service <filename>foo.service</filename> if
<option>Accept=false</option> is set. If
- <option>Accept=true</option> is set a service template
- file <filename>foo@.service</filename> must exist from
- which services are instantiated for each incoming
- connection.</para>
+ <option>Accept=true</option> is set, a service
+ template file <filename>foo@.service</filename> must
+ exist from which services are instantiated for each
+ incoming connection.</para>
<para>Unless <varname>DefaultDependencies=</varname>
is set to <option>false</option>, socket units will
boot or late system shutdown should disable this
option.</para>
+ <para>Socket units will have a
+ <varname>Before=</varname> dependency on the service
+ which they trigger added implicitly. No implicit
+ <varname>WantedBy=</varname> or
+ <varname>RequiredBy=</varname> dependency from the
+ socket to the service is added. This means that the
+ service may be started without the socket, in which
+ case it must be able to open sockets by itself. To
+ prevent this, an explicit <varname>Requires=</varname>
+ dependency may be added.</para>
+
<para>Socket units may be used to implement on-demand
starting of services, as well as parallelized starting
- of services.</para>
+ of services. See the blog stories linked at the end
+ for an introduction.</para>
<para>Note that the daemon software configured for
socket activation with socket units needs to be able
<citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for details) or via the traditional
<citerefentry><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>-style
- socket passing (i.e. sockets passed in via STDIN and
- STDOUT, using <varname>StandardInput=socket</varname>
+ socket passing (i.e. sockets passed in via standard input and
+ output, using <varname>StandardInput=socket</varname>
in the service file).</para>
</refsect1>
supervises. A number of options that may be used in
this section are shared with other unit types. These
options are documented in
- <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>. The
+ <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ and
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. The
options specific to the [Socket] section of socket
units are the following:</para>
- <variablelist>
+ <variablelist class='unit-directives'>
<varlistentry>
<term><varname>ListenStream=</varname></term>
<term><varname>ListenDatagram=</varname></term>
<term><varname>ListenSequentialPacket=</varname></term>
<listitem><para>Specifies an address
to listen on for a stream
- (SOCK_STREAM), datagram (SOCK_DGRAM)
- resp. sequential packet
- (SOCK_SEQPACKET) socket. The address
+ (<constant>SOCK_STREAM</constant>), datagram (<constant>SOCK_DGRAM</constant>),
+ or sequential packet
+ (<constant>SOCK_SEQPACKET</constant>) socket, respectively. The address
can be written in various formats:</para>
<para>If the address starts with a
- slash (/), it is read as file system
- socket in the AF_UNIX socket
+ slash (<literal>/</literal>), it is read as file system
+ socket in the <constant>AF_UNIX</constant> socket
family.</para>
- <para>If the address starts with an
- ampersand (@) it is read as abstract
- namespace socket in the AF_UNIX
- family. The @ is replaced with a NUL
- character before binding. For details
- see
- <citerefentry><refentrytitle>unix</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
+ <para>If the address starts with an at
+ symbol (<literal>@</literal>), it is read as abstract
+ namespace socket in the
+ <constant>AF_UNIX</constant>
+ family. The <literal>@</literal> is
+ replaced with a
+ <constant>NUL</constant> character
+ before binding. For details, see
+ <citerefentry project='man-pages'><refentrytitle>unix</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
<para>If the address string is a
- single number it is read as port
- number to listen on for both IPv4 and
- IPv6.</para>
+ single number, it is read as port
+ number to listen on via
+ IPv6. Depending on the value of
+ <varname>BindIPv6Only=</varname> (see below) this
+ might result in the service being
+ available via both IPv6 and IPv4 (default) or
+ just via IPv6.
+ </para>
<para>If the address string is a
- string in the format v.w.x.y:z it is
+ string in the format v.w.x.y:z, it is
read as IPv4 specifier for listening
on an address v.w.x.y on a port
z.</para>
<para>If the address string is a
- string in the format [x]:y it is read
- as IPv6 address x on a port y.</para>
-
- <para>Note that SOCK_SEQPACKET
+ string in the format [x]:y, it is read
+ as IPv6 address x on a port y. Note
+ that this might make the service
+ available via IPv4, too, depending on
+ the <varname>BindIPv6Only=</varname>
+ setting (see below).
+ </para>
+
+ <para>Note that <constant>SOCK_SEQPACKET</constant>
(i.e. <varname>ListenSequentialPacket=</varname>)
- is only available for AF_UNIX
- sockets. SOCK_STREAM
+ is only available for <constant>AF_UNIX</constant>
+ sockets. <constant>SOCK_STREAM</constant>
(i.e. <varname>ListenStream=</varname>)
when used for IP sockets refers to TCP
- sockets, SOCK_DGRAM
+ sockets, <constant>SOCK_DGRAM</constant>
(i.e. <varname>ListenDatagram=</varname>)
to UDP.</para>
<para>These options may be specified
more than once in which case incoming
- traffic on any of the sockets will trigger
- service activation, and all listed
- sockets will be passed to the service,
- regardless whether there is incoming
- traffic on them or not.</para>
-
- <para>If an IP address is used here, it
- is often desirable to listen on it
+ traffic on any of the sockets will
+ trigger service activation, and all
+ listed sockets will be passed to the
+ service, regardless of whether there is
+ incoming traffic on them or not. If
+ the empty string is assigned to any of
+ these options, the list of addresses
+ to listen on is reset, all prior uses
+ of any of these options will have no
+ effect.</para>
+
+ <para>It is also possible to have more
+ than one socket unit for the same
+ service when using
+ <varname>Service=</varname>, and the
+ service will receive all the sockets
+ configured in all the socket units.
+ Sockets configured in one unit are
+ passed in the order of configuration,
+ but no ordering between socket units
+ is specified.</para>
+
+ <para>If an IP address is used here,
+ it is often desirable to listen on it
before the interface it is configured
on is up and running, and even
- regardless whether it will be up and
- running ever at all. To deal with this it is
- recommended to set the
+ regardless of whether it will be up and
+ running at any point. To deal with this,
+ it is recommended to set the
<varname>FreeBind=</varname> option
described below.</para></listitem>
</varlistentry>
<listitem><para>Specifies a file
system FIFO to listen on. This expects
an absolute file system path as
- argument. Behaviour otherwise is very
+ argument. Behavior otherwise is very
similar to the
<varname>ListenDatagram=</varname>
directive above.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>ListenSpecial=</varname></term>
+ <listitem><para>Specifies a special
+ file in the file system to listen
+ on. This expects an absolute file
+ system path as argument. Behavior
+ otherwise is very similar to the
+ <varname>ListenFIFO=</varname>
+ directive above. Use this to open
+ character device nodes as well as
+ special files in
+ <filename>/proc</filename> and
+ <filename>/sys</filename>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>ListenNetlink=</varname></term>
+ <listitem><para>Specifies a Netlink
+ family to create a socket for to
+ listen on. This expects a short string
+ referring to the <constant>AF_NETLINK</constant> family
+ name (such as <varname>audit</varname>
+ or <varname>kobject-uevent</varname>)
+ as argument, optionally suffixed by a
+ whitespace followed by a multicast
+ group integer. Behavior otherwise is
+ very similar to the
+ <varname>ListenDatagram=</varname>
+ directive above.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>ListenMessageQueue=</varname></term>
+ <listitem><para>Specifies a POSIX
+ message queue name to listen on. This
+ expects a valid message queue name
+ (i.e. beginning with /). Behavior
+ otherwise is very similar to the
+ <varname>ListenFIFO=</varname>
+ directive above. On Linux message
+ queue descriptors are actually file
+ descriptors and can be inherited
+ between processes.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>BindIPv6Only=</varname></term>
<listitem><para>Takes a one of
<option>ipv6-only</option>, they will
be accessible via IPv6 only. If
<option>default</option> (which is the
- default, surprise!) the system wide
+ default, surprise!), the system wide
default setting is used, as controlled
by
- <filename>/proc/sys/net/ipv6/bindv6only</filename>.</para>
+ <filename>/proc/sys/net/ipv6/bindv6only</filename>,
+ which in turn defaults to the
+ equivalent of
+ <option>both</option>.</para>
</listitem>
</varlistentry>
<term><varname>BindToDevice=</varname></term>
<listitem><para>Specifies a network
interface name to bind this socket
- to. If set traffic will only be
+ to. If set, traffic will only be
accepted from the specified network
interfaces. This controls the
SO_BINDTODEVICE socket option (see
</varlistentry>
<varlistentry>
- <term><varname>DirectoryMode=</varname></term>
- <listitem><para>If listening on a file
- system socket of FIFO, the parent
- directories are automatically created
- if needed. This option specifies the
- file system access mode used when
- creating these directories. Takes an
- access mode in octal
- notation. Defaults to
- 0755.</para></listitem>
+ <term><varname>SocketUser=</varname></term>
+ <term><varname>SocketGroup=</varname></term>
+
+ <listitem><para>Takes a UNIX
+ user/group name. When specified,
+ all AF_UNIX sockets and FIFO nodes in
+ the file system are owned by the
+ specified user and group. If unset
+ (the default), the nodes are owned by
+ the root user/group (if run in system
+ context) or the invoking user/group
+ (if run in user context). If only a
+ user is specified but no group, then
+ the group is derived from the user's
+ default group.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>SocketMode=</varname></term>
<listitem><para>If listening on a file
- system socket of FIFO, this option
+ system socket or FIFO, this option
specifies the file system access mode
used when creating the file
node. Takes an access mode in octal
0666.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>DirectoryMode=</varname></term>
+ <listitem><para>If listening on a file
+ system socket or FIFO, the parent
+ directories are automatically created
+ if needed. This option specifies the
+ file system access mode used when
+ creating these directories. Takes an
+ access mode in octal
+ notation. Defaults to
+ 0755.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>Accept=</varname></term>
<listitem><para>Takes a boolean
and only one service unit is spawned
for all connections (also see
above). This value is ignored for
- datagram sockets and FIFOs where
- a single service unit unconditionally
+ datagram sockets and FIFOs where a
+ single service unit unconditionally
handles all incoming traffic. Defaults
to <option>false</option>. For
performance reasons, it is recommended
to write new daemons only in a way
that is suitable for
- <option>Accept=false</option>. This
- option is mostly useful to allow
- daemons designed for usage with
- <citerefentry><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <option>Accept=false</option>. A
+ daemon listening on an <constant>AF_UNIX</constant> socket
+ may, but does not need to, call
+ <citerefentry><refentrytitle>close</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ on the received socket before
+ exiting. However, it must not unlink
+ the socket from a file system. It
+ should not invoke
+ <citerefentry><refentrytitle>shutdown</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ on sockets it got with
+ <varname>Accept=false</varname>, but
+ it may do so for sockets it got with
+ <varname>Accept=true</varname> set.
+ Setting <varname>Accept=true</varname>
+ is mostly useful to allow daemons
+ designed for usage with
+ <citerefentry><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>
to work unmodified with systemd socket
activation.</para></listitem>
</varlistentry>
are coming in, they will be refused
until at least one existing connection
is terminated. This setting has no
- effect for sockets configured with
- <option>Accept=no</option> or datagram
+ effect on sockets configured with
+ <option>Accept=false</option> or datagram
sockets. Defaults to
64.</para></listitem>
</varlistentry>
<term><varname>ReceiveBuffer=</varname></term>
<term><varname>SendBuffer=</varname></term>
<listitem><para>Takes an integer
- argument controlling the receive
- resp. send buffer sizes of this
- socket. This controls the SO_RCVBUF
- resp. SO_SNDBUF socket options (see
+ argument controlling the receive or
+ send buffer sizes of this socket,
+ respectively. This controls the
+ SO_RCVBUF and SO_SNDBUF socket options
+ (see
<citerefentry><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
- for details.).</para></listitem>
+ for details.). The usual suffixes K,
+ M, G are supported and are understood
+ to the base of 1024.</para></listitem>
</varlistentry>
<varlistentry>
for details.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>ReusePort=</varname></term>
+ <listitem><para>Takes a boolean
+ value. If true, allows multiple <citerefentry><refentrytitle>bind</refentrytitle><manvolnum>2</manvolnum></citerefentry>s
+ to this TCP or UDP port. This
+ controls the SO_REUSEPORT socket
+ option. See
+ <citerefentry><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for details.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SmackLabel=</varname></term>
+ <term><varname>SmackLabelIPIn=</varname></term>
+ <term><varname>SmackLabelIPOut=</varname></term>
+ <listitem><para>Takes a string
+ value. Controls the extended
+ attributes
+ <literal>security.SMACK64</literal>,
+ <literal>security.SMACK64IPIN</literal>
+ and
+ <literal>security.SMACK64IPOUT</literal>,
+ respectively, i.e. the security label
+ of the FIFO, or the security label for
+ the incoming or outgoing connections
+ of the socket, respectively. See
+ <ulink
+ url="https://www.kernel.org/doc/Documentation/security/Smack.txt">Smack.txt</ulink>
+ for details.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>PipeSize=</varname></term>
- <listitem><para>Takes an integer
- value. Controls the pipe buffer size
+ <listitem><para>Takes a size in
+ bytes. Controls the pipe buffer size
of FIFOs configured in this socket
- unit. See
+ unit. See
<citerefentry><refentrytitle>fcntl</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ for details. The usual suffixes K, M,
+ G are supported and are understood to
+ the base of 1024.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>MessageQueueMaxMessages=</varname>,
+ <varname>MessageQueueMessageSize=</varname></term>
+ <listitem><para>These two settings
+ take integer values and control the
+ mq_maxmsg field or the mq_msgsize field, respectively, when
+ creating the message queue. Note that
+ either none or both of these variables
+ need to be set. See
+ <citerefentry><refentrytitle>mq_setattr</refentrytitle><manvolnum>3</manvolnum></citerefentry>
for details.</para></listitem>
</varlistentry>
address. Defaults to <option>false</option>.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>Transparent=</varname></term>
+ <listitem><para>Takes a boolean
+ value. Controls the IP_TRANSPARENT
+ socket option. Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Broadcast=</varname></term>
+ <listitem><para>Takes a boolean
+ value. This controls the SO_BROADCAST
+ socket option, which allows broadcast
+ datagrams to be sent from this
+ socket. Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>PassCredentials=</varname></term>
+ <listitem><para>Takes a boolean
+ value. This controls the SO_PASSCRED
+ socket option, which allows <constant>AF_UNIX</constant> sockets to
+ receive the credentials of the sending
+ process in an ancillary message.
+ Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>PassSecurity=</varname></term>
+ <listitem><para>Takes a boolean
+ value. This controls the SO_PASSSEC
+ socket option, which allows <constant>AF_UNIX</constant>
+ sockets to receive the security
+ context of the sending process in an
+ ancillary message. Defaults to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>TCPCongestion=</varname></term>
<listitem><para>Takes a string
<term><varname>ExecStartPost=</varname></term>
<listitem><para>Takes one or more
command lines, which are executed
- before (resp. after) the listening
+ before or after the listening
sockets/FIFOs are created and
- bound. The first token of the command
- line must be an absolute file name,
+ bound, respectively. The first token of the command
+ line must be an absolute filename,
then followed by arguments for the
process. Multiple command lines may be
specified following the same scheme as
<term><varname>ExecStopPre=</varname></term>
<term><varname>ExecStopPost=</varname></term>
<listitem><para>Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the listening sockets/FIFOs are closed
- and removed. Multiple command lines
+ and removed, respectively. Multiple command lines
may be specified following the same
scheme as used for
<varname>ExecStartPre=</varname> of
finish. If a command does not exit
within the configured time, the socket
will be considered failed and be shut
- down again. All commands still running,
+ down again. All commands still running
will be terminated forcibly via
- SIGTERM, and after another delay of
- this time with SIGKILL. (See
- <option>KillMode=</option> below.)
+ <constant>SIGTERM</constant>, and after another delay of
+ this time with <constant>SIGKILL</constant>. (See
+ <option>KillMode=</option> in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.)
Takes a unit-less value in seconds, or
a time span value such as "5min
- 20s". Pass 0 to disable the timeout
- logic. Defaults to
- 60s.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>KillMode=</varname></term>
- <listitem><para>Specifies how
- processes of this socket unit shall be
- killed. One of
- <option>control-group</option>,
- <option>process</option>,
- <option>none</option>.</para>
-
- <para>This option is mostly equivalent
- to the <option>KillMode=</option>
- option of service files. See
- <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- for details.</para></listitem>
+ 20s". Pass <literal>0</literal> to disable the timeout
+ logic. Defaults to <varname>DefaultTimeoutStartSec=</varname> from the
+ manager configuration file
+ (see <citerefentry><refentrytitle>systemd-systemd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
+ </para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>KillSignal=</varname></term>
- <listitem><para>Specifies which signal
- to use when killing a process of this
- socket. Defaults to SIGTERM.
- </para></listitem>
+ <term><varname>Service=</varname></term>
+ <listitem><para>Specifies the service
+ unit name to activate on incoming
+ traffic. This setting is only allowed
+ for sockets with
+ <varname>Accept=no</varname>. It
+ defaults to the service that bears the
+ same name as the socket (with the
+ suffix replaced). In most cases, it
+ should not be necessary to use this
+ option.</para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>SendSIGKILL=</varname></term>
- <listitem><para>Specifies whether to
- send SIGKILL to remaining processes
- after a timeout, if the normal
- shutdown procedure left processes of
- the socket around. Takes a boolean
- value. Defaults to "yes".
- </para></listitem>
+ <term><varname>RemoveOnStop=</varname></term>
+ <listitem><para>Takes a boolean
+ argument. If enabled, any file nodes
+ created by this socket unit are
+ removed when it is stopped. This
+ applies to AF_UNIX sockets in the file
+ system, POSIX message queues, FIFOs,
+ as well as any symlinks to
+ them configured with
+ <varname>Symlinks=</varname>. Normally,
+ it should not be necessary to use this
+ option, and is not recommended as
+ services might continue to run after
+ the socket unit has been terminated
+ and it should still be possible to
+ communicate with them via their file
+ system node. Defaults to
+ off.</para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>Service=</varname></term>
- <listitem><para>Specifies the service
- unit name to activate on incoming
- traffic. This defaults to the service
- that bears the same name as the socket
- (ignoring the different suffixes). In
- most cases it should not be necessary
- to use this option.</para></listitem>
+ <term><varname>Symlinks=</varname></term>
+ <listitem><para>Takes a list of file
+ system paths. The specified paths will
+ be created as symlinks to the AF_UNIX
+ socket path or FIFO path of this
+ socket unit. If this setting is used,
+ only one AF_UNIX socket in the file
+ system or one FIFO may be configured
+ for the socket unit. Use this option
+ to manage one or more symlinked alias
+ names for a socket, binding their
+ lifecycle together. Defaults to the
+ empty list.</para></listitem>
</varlistentry>
</variablelist>
+
+ <para>Check
+ <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ and
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for more settings.</para>
+
</refsect1>
<refsect1>
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ </para>
+
+ <para>
+ For more extensive descriptions see the "systemd for Developers" series:
+ <ulink url="http://0pointer.de/blog/projects/socket-activation.html">Socket Activation</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/socket-activation2.html">Socket Activation, part II</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/inetd.html">Converting inetd Services</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/socket-activated-containers.html">Socket Activated Internet Services and OS Containers</ulink>.
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff