</refnamediv>
<refsynopsisdiv>
- <para><filename>systemd.socket</filename></para>
+ <para><filename><replaceable>socket</replaceable>.socket</filename></para>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>A unit configuration file whose name ends in
- <filename>.socket</filename> encodes information about
+ <literal>.socket</literal> encodes information about
an IPC or network socket or a file system FIFO
controlled and supervised by systemd, for socket-based
activation.</para>
<option>ExecStartPre=</option>,
<option>ExecStartPost=</option>,
<option>ExecStopPre=</option> and
- <option>ExecStoptPost=</option> commands are executed
+ <option>ExecStopPost=</option> commands are executed
in, and in
- <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which define the way the processes are
- terminated.</para>
+ terminated, and in
+ <citerefentry><refentrytitle>systemd.cgroup</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ which configure control group settings for the
+ processes of the service.</para>
<para>For each socket file a matching service file
(see
<filename>foo.socket</filename> needs a matching
service <filename>foo.service</filename> if
<option>Accept=false</option> is set. If
- <option>Accept=true</option> is set a service template
+ <option>Accept=true</option> is set, a service template
file <filename>foo@.service</filename> must exist from
which services are instantiated for each incoming
connection.</para>
options specific to the [Socket] section of socket
units are the following:</para>
- <variablelist>
+ <variablelist class='unit-directives'>
<varlistentry>
<term><varname>ListenStream=</varname></term>
<term><varname>ListenDatagram=</varname></term>
<term><varname>ListenSequentialPacket=</varname></term>
<listitem><para>Specifies an address
to listen on for a stream
- (SOCK_STREAM), datagram (SOCK_DGRAM)
- resp. sequential packet
- (SOCK_SEQPACKET) socket. The address
+ (<constant>SOCK_STREAM</constant>), datagram (<constant>SOCK_DGRAM</constant>),
+ or sequential packet
+ (<constant>SOCK_SEQPACKET</constant>) socket, respectively. The address
can be written in various formats:</para>
<para>If the address starts with a
- slash (/), it is read as file system
- socket in the AF_UNIX socket
+ slash (<literal>/</literal>), it is read as file system
+ socket in the <constant>AF_UNIX</constant> socket
family.</para>
- <para>If the address starts with an
- at symbol (@) it is read as abstract
- namespace socket in the AF_UNIX
- family. The @ is replaced with a NUL
- character before binding. For details
- see
+ <para>If the address starts with an at
+ symbol (<literal>@</literal>), it is read as abstract
+ namespace socket in the
+ <constant>AF_UNIX</constant>
+ family. The <literal>@</literal> is
+ replaced with a
+ <constant>NUL</constant> character
+ before binding. For details, see
<citerefentry><refentrytitle>unix</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para>
<para>If the address string is a
- single number it is read as port
- number to listen on for both IPv4 and
- IPv6.</para>
+ single number, it is read as port
+ number to listen on via
+ IPv6. Depending on the value of
+ <varname>BindIPv6Only=</varname> (see below) this
+ might result in the service being
+ available via both IPv6 and IPv4 (default) or
+ just via IPv6.
+ </para>
<para>If the address string is a
- string in the format v.w.x.y:z it is
+ string in the format v.w.x.y:z, it is
read as IPv4 specifier for listening
on an address v.w.x.y on a port
z.</para>
<para>If the address string is a
- string in the format [x]:y it is read
- as IPv6 address x on a port y.</para>
-
- <para>Note that SOCK_SEQPACKET
+ string in the format [x]:y, it is read
+ as IPv6 address x on a port y. Note
+ that this might make the service
+ available via IPv4, too, depending on
+ the <varname>BindIPv6Only=</varname>
+ setting (see below).
+ </para>
+
+ <para>Note that <constant>SOCK_SEQPACKET</constant>
(i.e. <varname>ListenSequentialPacket=</varname>)
- is only available for AF_UNIX
- sockets. SOCK_STREAM
+ is only available for <constant>AF_UNIX</constant>
+ sockets. <constant>SOCK_STREAM</constant>
(i.e. <varname>ListenStream=</varname>)
when used for IP sockets refers to TCP
- sockets, SOCK_DGRAM
+ sockets, <constant>SOCK_DGRAM</constant>
(i.e. <varname>ListenDatagram=</varname>)
to UDP.</para>
<para>These options may be specified
more than once in which case incoming
- traffic on any of the sockets will trigger
- service activation, and all listed
- sockets will be passed to the service,
- regardless whether there is incoming
- traffic on them or not.</para>
-
- <para>If an IP address is used here, it
- is often desirable to listen on it
+ traffic on any of the sockets will
+ trigger service activation, and all
+ listed sockets will be passed to the
+ service, regardless whether there is
+ incoming traffic on them or not. If
+ the empty string is assigned to any of
+ these options, the list of addresses
+ to listen on is reset, all prior uses
+ of any of these options will have no
+ effect.</para>
+
+ <para>If an IP address is used here,
+ it is often desirable to listen on it
before the interface it is configured
on is up and running, and even
regardless whether it will be up and
- running ever at all. To deal with this it is
- recommended to set the
+ running ever at all. To deal with this
+ it is recommended to set the
<varname>FreeBind=</varname> option
described below.</para></listitem>
</varlistentry>
<listitem><para>Specifies a Netlink
family to create a socket for to
listen on. This expects a short string
- referring to the AF_NETLINK family
+ referring to the <constant>AF_NETLINK</constant> family
name (such as <varname>audit</varname>
or <varname>kobject-uevent</varname>)
as argument, optionally suffixed by a
<option>ipv6-only</option>, they will
be accessible via IPv6 only. If
<option>default</option> (which is the
- default, surprise!) the system wide
+ default, surprise!), the system wide
default setting is used, as controlled
by
- <filename>/proc/sys/net/ipv6/bindv6only</filename>.</para>
+ <filename>/proc/sys/net/ipv6/bindv6only</filename>,
+ which in turn defaults to the
+ equivalent of
+ <option>both</option>.</para>
</listitem>
</varlistentry>
<term><varname>BindToDevice=</varname></term>
<listitem><para>Specifies a network
interface name to bind this socket
- to. If set traffic will only be
+ to. If set, traffic will only be
accepted from the specified network
interfaces. This controls the
SO_BINDTODEVICE socket option (see
<varlistentry>
<term><varname>DirectoryMode=</varname></term>
<listitem><para>If listening on a file
- system socket of FIFO, the parent
+ system socket or FIFO, the parent
directories are automatically created
if needed. This option specifies the
file system access mode used when
<varlistentry>
<term><varname>SocketMode=</varname></term>
<listitem><para>If listening on a file
- system socket of FIFO, this option
+ system socket or FIFO, this option
specifies the file system access mode
used when creating the file
node. Takes an access mode in octal
and only one service unit is spawned
for all connections (also see
above). This value is ignored for
- datagram sockets and FIFOs where
- a single service unit unconditionally
+ datagram sockets and FIFOs where a
+ single service unit unconditionally
handles all incoming traffic. Defaults
to <option>false</option>. For
performance reasons, it is recommended
to write new daemons only in a way
that is suitable for
- <option>Accept=false</option>. This
- option is mostly useful to allow
- daemons designed for usage with
- <citerefentry><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <option>Accept=false</option>. A
+ daemon listening on an <constant>AF_UNIX</constant> socket
+ may, but does not need to, call
+ <citerefentry><refentrytitle>close</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ on the received socket before
+ exiting. However, it must not unlink
+ the socket from a file system. It
+ should not invoke
+ <citerefentry><refentrytitle>shutdown</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ on sockets it got with
+ <varname>Accept=false</varname>, but
+ it may do so for sockets it got with
+ <varname>Accept=true</varname> set.
+ Setting <varname>Accept=true</varname>
+ is mostly useful to allow daemons
+ designed for usage with
+ <citerefentry><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>
to work unmodified with systemd socket
activation.</para></listitem>
</varlistentry>
are coming in, they will be refused
until at least one existing connection
is terminated. This setting has no
- effect for sockets configured with
- <option>Accept=no</option> or datagram
+ effect on sockets configured with
+ <option>Accept=false</option> or datagram
sockets. Defaults to
64.</para></listitem>
</varlistentry>
<term><varname>SendBuffer=</varname></term>
<listitem><para>Takes an integer
argument controlling the receive
- resp. send buffer sizes of this
- socket. This controls the SO_RCVBUF
- resp. SO_SNDBUF socket options (see
+ or send buffer sizes of this
+ socket, respectively. This controls the SO_RCVBUF
+ and SO_SNDBUF socket options (see
<citerefentry><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details.).</para></listitem>
</varlistentry>
for details.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>ReusePort=</varname></term>
+ <listitem><para>Takes a boolean
+ value. If true, allows multiple <citerefentry><refentrytitle>bind</refentrytitle><manvolnum>2</manvolnum></citerefentry>s
+ to this TCP or UDP port. This
+ controls the SO_REUSEPORT socket
+ option. See
+ <citerefentry><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for details.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SmackLabel=</varname></term>
+ <term><varname>SmackLabelIPIn=</varname></term>
+ <term><varname>SmackLabelIPOut=</varname></term>
+ <listitem><para>Takes a string
+ value. Controls the extended
+ attributes
+ <literal>security.SMACK64</literal>,
+ <literal>security.SMACK64IPIN</literal>
+ and
+ <literal>security.SMACK64IPOUT</literal>,
+ respectively, i.e. the security label
+ of the FIFO, or the security label for
+ the incoming or outgoing connections
+ of the socket, respectively. See
+ <ulink
+ url="https://www.kernel.org/doc/Documentation/security/Smack.txt">Smack.txt</ulink>
+ for details.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>PipeSize=</varname></term>
<listitem><para>Takes an integer
value. Controls the pipe buffer size
of FIFOs configured in this socket
- unit. See
+ unit. See
<citerefentry><refentrytitle>fcntl</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for details.</para></listitem>
</varlistentry>
<varname>MessageQueueMessageSize=</varname></term>
<listitem><para>These two settings
take integer values and control the
- mq_maxmsg resp. mq_msgsize field when
+ mq_maxmsg field or the mq_msgsize field, respectively, when
creating the message queue. Note that
either none or both of these variables
need to be set. See
<term><varname>PassCredentials=</varname></term>
<listitem><para>Takes a boolean
value. This controls the SO_PASSCRED
- socket option, which allows AF_UNIX sockets to
+ socket option, which allows <constant>AF_UNIX</constant> sockets to
receive the credentials of the sending
process in an ancillary message.
Defaults to
<term><varname>PassSecurity=</varname></term>
<listitem><para>Takes a boolean
value. This controls the SO_PASSSEC
- socket option, which allows AF_UNIX
+ socket option, which allows <constant>AF_UNIX</constant>
sockets to receive the security
context of the sending process in an
- ancillary message. Defaults to
+ ancillary message. Defaults to
<option>false</option>.</para></listitem>
</varlistentry>
<term><varname>ExecStartPost=</varname></term>
<listitem><para>Takes one or more
command lines, which are executed
- before (resp. after) the listening
+ before or after the listening
sockets/FIFOs are created and
- bound. The first token of the command
- line must be an absolute file name,
+ bound, respectively. The first token of the command
+ line must be an absolute filename,
then followed by arguments for the
process. Multiple command lines may be
specified following the same scheme as
<term><varname>ExecStopPre=</varname></term>
<term><varname>ExecStopPost=</varname></term>
<listitem><para>Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the listening sockets/FIFOs are closed
- and removed. Multiple command lines
+ and removed, respectively. Multiple command lines
may be specified following the same
scheme as used for
<varname>ExecStartPre=</varname> of
will be considered failed and be shut
down again. All commands still running,
will be terminated forcibly via
- SIGTERM, and after another delay of
- this time with SIGKILL. (See
+ <constant>SIGTERM</constant>, and after another delay of
+ this time with <constant>SIGKILL</constant>. (See
<option>KillMode=</option> in <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.)
Takes a unit-less value in seconds, or
a time span value such as "5min
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.cgroup</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ </para>
+
+ <para>
+ For more extensive descriptions see the "systemd for Developers" series:
+ <ulink url="http://0pointer.de/blog/projects/socket-activation.html">Socket Activation</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/socket-activation2.html">Socket Activation, part II</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/inetd.html">Converting inetd Services</ulink>,
+ <ulink url="http://0pointer.de/blog/projects/socket-activated-containers.html">Socket Activated Internet Services and OS Containers</ulink>.
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff