<para>Turn on CPU usage accounting for this unit. Takes a
boolean argument. Note that turning on CPU accounting for
one unit might also implicitly turn it on for all units
- contained in the same slice and for all its parent slices and
- the units contained therein.</para>
+ contained in the same slice and for all its parent slices
+ and the units contained therein. The system default for this
+ setting maybe controlled with
+ <varname>DefaultCPUAccounting=</varname> in
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>CPUShares=<replaceable>weight</replaceable></varname></term>
+ <term><varname>StartupCPUShares=<replaceable>weight</replaceable></varname></term>
<listitem>
- <para>Assign the specified overall CPU time share weight to
- the processes executed. Takes an integer value. This
- controls the <literal>cpu.shares</literal> control group
+ <para>Assign the specified CPU time share weight to the
+ processes executed. Those options take an integer value and
+ control the <literal>cpu.shares</literal> control group
attribute, which defaults to 1024. For details about this
control group attribute, see <ulink
+ url="https://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt">sched-design-CFS.txt</ulink>.
+ The available CPU time is split up among all units within
+ one slice relative to their CPU time share weight.</para>
+
+ <para>While <varname>StartupCPUShares=</varname> only
+ applies to the startup phase of the system,
+ <varname>CPUShares=</varname> applies to normal runtime of
+ the system, and if the former is not set also to the startup
+ phase. Using <varname>StartupCPUShares=</varname> allows
+ priorizing specific services at boot-up differently than
+ during normal runtime.</para>
+
+ <para>Those options imply
+ <literal>CPUAccounting=true</literal>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>CPUQuota=</varname></term>
+
+ <listitem>
+ <para>Assign the specified CPU time quota to the processes
+ executed. Takes a percentage value, suffixed with "%". The
+ percentage specifies how much CPU time the unit shall get at
+ maximum, relative to the total CPU time available on one
+ CPU. Use values > 100% for alloting CPU time on more than
+ one CPU. This controls the
+ <literal>cpu.cfs_quota_us</literal> control group
+ attribute. For details about this control group attribute,
+ see <ulink
url="https://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt">sched-design-CFS.txt</ulink>.</para>
+ <para>Example: <varname>CPUShares=20%</varname> ensures that
+ the executed processes will never get more than 20% CPU time
+ on one CPU.</para>
+
<para>Implies <literal>CPUAccounting=true</literal>.</para>
</listitem>
</varlistentry>
<para>Turn on process and kernel memory accounting for this
unit. Takes a boolean argument. Note that turning on memory
accounting for one unit might also implicitly turn it on for
- all units contained in the same slice and for all its parent
- slices and the units contained therein.</para>
+ all its parent slices. The system default for this setting
+ maybe controlled with
+ <varname>DefaultMemoryAccounting=</varname> in
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
</listitem>
</varlistentry>
<para>Turn on Block IO accounting for this unit. Takes a
boolean argument. Note that turning on block IO accounting
for one unit might also implicitly turn it on for all units
- contained in the same slice and all for its parent slices and
- the units contained therein.</para>
+ contained in the same slice and all for its parent slices
+ and the units contained therein. The system default for this
+ setting maybe controlled with
+ <varname>DefaultBlockIOAccounting=</varname> in
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>BlockIOWeight=<replaceable>weight</replaceable></varname></term>
-
- <listitem><para>Set the default
- overall block IO weight for the
- executed processes. Takes a single
- weight value (between 10 and 1000) to
- set the default block IO weight. This
- controls the
- <literal>blkio.weight</literal>
- control group attribute, which
- defaults to 1000. For details about
- this control group attribute, see
- <ulink
- url="https://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.</para>
+ <term><varname>StartupBlockIOWeight=<replaceable>weight</replaceable></varname></term>
+
+ <listitem><para>Set the default overall block IO weight for
+ the executed processes. Takes a single weight value (between
+ 10 and 1000) to set the default block IO weight. This controls
+ the <literal>blkio.weight</literal> control group attribute,
+ which defaults to 1000. For details about this control group
+ attribute, see <ulink
+ url="https://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.
+ The available IO bandwidth is split up among all units within
+ one slice relative to their block IO weight.</para>
+
+ <para>While <varname>StartupBlockIOWeight=</varname> only
+ applies to the startup phase of the system,
+ <varname>BlockIOWeight=</varname> applies to the later runtime
+ of the system, and if the former is not set also to the
+ startup phase. This allows priorizing specific services at
+ boot-up differently than during runtime.</para>
<para>Implies
<literal>BlockIOAccounting=true</literal>.</para>
case the backing block device of the file system of the file
is used. If the bandwidth is suffixed with K, M, G, or T,
the specified bandwidth is parsed as Kilobytes, Megabytes,
- Gigabytes, or Terabytes, respectively (Example:
+ Gigabytes, or Terabytes, respectively, to the base of
+ 1000. (Example:
"/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 5M"). This
controls the <literal>blkio.read_bps_device</literal> and
<literal>blkio.write_bps_device</literal> control group
attributes. Use this option multiple times to set bandwidth
limits for multiple devices. For details about these control
- group attributes, see
- <ulink url="https://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.
+ group attributes, see <ulink
+ url="https://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.
</para>
<para>Implies
followed by a device group name, as listed in
<filename>/proc/devices</filename>. The latter is useful to
whitelist all current and future devices belonging to a
- specific device group at once. Examples:
- <filename>/dev/sda5</filename> is a path to a device node,
- referring to an ATA or SCSI block
+ specific device group at once. The device group is matched
+ according to file name globbing rules, you may hence use the
+ <literal>*</literal> and <literal>?</literal>
+ wildcards. Examples: <filename>/dev/sda5</filename> is a
+ path to a device node, referring to an ATA or SCSI block
device. <literal>char-pts</literal> and
<literal>char-alsa</literal> are specifiers for all pseudo
- TTYs and all ALSA sound devices, respectively.</para>
+ TTYs and all ALSA sound devices,
+ respectively. <literal>char-cpu/*</literal> is a specifier
+ matching all CPU related device groups.</para>
</listitem>
</varlistentry>
~ianmdlvl / elogind.git / blobdiff