-<?xml version='1.0'?> <!--*-nxml-*-->
+<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
-<refentry id="systemctl">
+<refentry id="systemctl"
+ xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>systemctl</title>
<refsect1>
<title>Description</title>
- <para><command>systemctl</command> may be used to
- introspect and control the state of the
+ <para><command>systemctl</command> may be used to introspect and
+ control the state of the <literal>systemd</literal> system and
+ service manager. Please refer to
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- system and service manager.</para>
+ for an introduction into the basic concepts and functionality this
+ tool manages.</para>
</refsect1>
<refsect1>
<para>The following options are understood:</para>
<variablelist>
- <varlistentry>
- <term><option>-h</option></term>
- <term><option>--help</option></term>
-
- <listitem><para>Prints a short help
- text and exits.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--version</option></term>
-
- <listitem>
- <para>Prints a short version string and exits.</para>
- </listitem>
- </varlistentry>
-
<varlistentry>
<term><option>-t</option></term>
<term><option>--type=</option></term>
<term><option>--state=</option></term>
<listitem>
- <para>The argument should be a comma-separated list of unit LOAD,
- SUB, or ACTIVE states. When listing units, show only those
- in specified states.</para>
+ <para>The argument should be a comma-separated list of unit
+ LOAD, SUB, or ACTIVE states. When listing units, show only
+ those in specified states. Use <option>--state=failed</option>
+ to show only failed units.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>-r</option></term>
+ <term><option>--recursive</option></term>
+
+ <listitem>
+ <para>When listing units, also show units of local
+ containers. Units of local containers will be prefixed with
+ the container name, separated by a single colon character
+ (<literal>:</literal>).</para>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><option>--reverse</option></term>
<listitem>
<para>Show reverse dependencies between units with
- <command>list-dependencies</command>, i.e. units with
- dependencies of type <varname>Wants=</varname> or
- <varname>Requires=</varname> on the given unit.
+ <command>list-dependencies</command>, i.e. follow
+ dependencies of type <varname>WantedBy=</varname>,
+ <varname>RequiredBy=</varname>,
+ <varname>RequiredByOverrridable=</varname>,
+ <varname>PartOf=</varname>, <varname>BoundBy=</varname>,
+ instead of <varname>Wants=</varname> and similar.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>--after</option></term>
+
+ <listitem>
+ <para>With <command>list-dependencies</command>, show the
+ units that are ordered before the specified unit. In other
+ words, recursively list units following the
+ <varname>After=</varname> dependency.</para>
+
+ <para>Note that any <varname>After=</varname> dependency is
+ automatically mirrored to create a
+ <varname>Before=</varname> dependency. Temporal dependencies
+ may be specified explicitly, but are also created implicitly
+ for units which are <varname>WantedBy=</varname> targets
+ (see
+ <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>),
+ and as a result of other directives (for example
+ <varname>RequiresMountsFor=</varname>). Both explicitly
+ and implicitly introduced dependencies are shown with
+ <command>list-dependencies</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><option>--before</option></term>
<listitem>
- <para>Show which units are started after or before
- with <command>list-dependencies</command>, respectively.
- </para>
+ <para>With <command>list-dependencies</command>, show the
+ units that are ordered after the specified unit. In other
+ words, recursively list units following the
+ <varname>Before=</varname> dependency.</para>
</listitem>
</varlistentry>
<term><option>--full</option></term>
<listitem>
- <para>Do not ellipsize unit names, process tree entries, and
- truncate unit descriptions in the output of
- <command>list-units</command> and
- <command>list-jobs</command>.</para>
+ <para>Do not ellipsize unit names, process tree entries,
+ journal output, or truncate unit descriptions in the output
+ of <command>status</command>, <command>list-units</command>,
+ <command>list-jobs</command>, and
+ <command>list-timers</command>.</para>
</listitem>
</varlistentry>
<term><option>--job-mode=</option></term>
<listitem>
- <para>When queuing a new job, control how to deal with already
- queued jobs. Takes one of <literal>fail</literal>,
+ <para>When queuing a new job, this option controls how to deal with
+ already queued jobs. It takes one of <literal>fail</literal>,
<literal>replace</literal>,
<literal>replace-irreversibly</literal>,
<literal>isolate</literal>,
<para>If <literal>replace-irreversibly</literal> is specified,
operate like <literal>replace</literal>, but also mark the new
jobs as irreversible. This prevents future conflicting
- transactions from replacing these jobs. The jobs can still be
- cancelled using the <command>cancel</command> command.</para>
+ transactions from replacing these jobs (or even being enqueued
+ while the irreversible jobs are still pending). Irreversible
+ jobs can still be cancelled using the <command>cancel</command>
+ command.</para>
<para><literal>isolate</literal> is only valid for start
operations and causes all other units to be stopped when the
applications.</para>
<para><literal>ignore-requirements</literal> is similar to
- <literal>ignore-dependencies</literal> but only causes the
+ <literal>ignore-dependencies</literal>, but only causes the
requirement dependencies to be ignored, the ordering
dependencies will still be honoured.</para>
</listitem>
sleep state. Any user may take these locks and privileged
users may override these locks. If any locks are taken,
shutdown and sleep state requests will normally fail
- (regardless if privileged or not) and a list of active locks
+ (regardless of whether privileged or not) and a list of active locks
is printed. However, if <option>--ignore-inhibitors</option>
is specified, the locks are ignored and not printed, and the
operation attempted anyway, possibly requiring additional
<command>snapshot</command>,
<command>is-active</command>,
<command>is-failed</command>,
+ <command>is-enabled</command>,
+ <command>is-system-running</command>,
<command>enable</command> and
<command>disable</command>.</para>
</listitem>
<term><option>--no-legend</option></term>
<listitem>
- <para>Do not print a legend, i.e. the column headers and
+ <para>Do not print the legend, i.e. the column headers and
the footer with hints.</para>
</listitem>
</varlistentry>
- <varlistentry>
- <term><option>--no-pager</option></term>
-
- <listitem>
- <para>Do not pipe output into a pager.</para>
- </listitem>
- </varlistentry>
+ <xi:include href="user-system-options.xml" xpointer="user" />
+ <xi:include href="user-system-options.xml" xpointer="system" />
- <varlistentry>
- <term><option>--system</option></term>
-
- <listitem>
- <para>Talk to the systemd system manager. (Default)</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--user</option></term>
-
- <listitem>
- <para>Talk to the systemd manager of the calling
- user.</para>
- </listitem>
- </varlistentry>
+ <!-- we do not document -failed here, as it has been made
+ redundant by -state=failed, which it predates. To keep
+ things simple we only document the new switch, while
+ keeping the old one around for compatibility only. -->
<varlistentry>
<term><option>--no-wall</option></term>
querying the user for authentication for privileged
operations.</para>
</listitem>
-
</varlistentry>
<varlistentry>
<listitem>
<para>When used with <command>kill</command>, choose which
- processes to kill. Must be one of <option>main</option>,
- <option>control</option> or <option>all</option> to select
- whether to kill only the main process of the unit, the
- control process or all processes of the unit. If omitted,
- defaults to <option>all</option>.</para>
+ processes to send a signal to. Must be one of
+ <option>main</option>, <option>control</option> or
+ <option>all</option> to select whether to kill only the main
+ process, the control process or all processes of the
+ unit. The main process of the unit is the one that defines
+ the life-time of it. A control process of a unit is one that
+ is invoked by the manager to induce state changes of it. For
+ example, all processes started due to the
+ <varname>ExecStartPre=</varname>,
+ <varname>ExecStop=</varname> or
+ <varname>ExecReload=</varname> settings of service units are
+ control processes. Note that there is only one control
+ process per unit at a time, as only one state change is
+ executed at a time. For services of type
+ <varname>Type=forking</varname>, the initial process started
+ by the manager for <varname>ExecStart=</varname> is a
+ control process, while the process ultimately forked off by
+ that one is then considered the main process of the unit (if
+ it can be determined). This is different for service units
+ of other types, where the process forked off by the manager
+ for <varname>ExecStart=</varname> is always the main process
+ itself. A service unit consists of zero or one main process,
+ zero or one control process plus any number of additional
+ processes. Not all unit types manage processes of these
+ types however. For example, for mount units, control processes
+ are defined (which are the invocations of
+ <filename>/usr/bin/mount</filename> and
+ <filename>/usr/bin/umount</filename>), but no main process
+ is defined. If omitted, defaults to
+ <option>all</option>.</para>
</listitem>
</varlistentry>
safe option to request an immediate reboot. If
<option>--force</option> is specified twice for these
operations, they will be executed immediately without
- terminating any processes or umounting any file
+ terminating any processes or unmounting any file
systems. Warning: specifying <option>--force</option> twice
with any of these operations might result in data
loss.</para>
<listitem>
<para>When used with <command>enable</command>,
- <command>disable</command>, <command>is-enabled</command>
+ <command>disable</command>, <command>edit</command>,
(and related commands), make changes only temporarily, so
that they are lost on the next reboot. This will have the
effect that changes are not made in subdirectories of
with identical immediate effects, however, since the latter
is lost on reboot, the changes are lost too.</para>
- <para>Similar, when used with
+ <para>Similarly, when used with
<command>set-property</command>, make changes only
temporarily, so that they are lost on the next
reboot.</para>
</varlistentry>
<varlistentry>
- <term><option>-H</option></term>
- <term><option>--host</option></term>
+ <term><option>--preset-mode=</option></term>
<listitem>
- <para>Execute the operation remotely. Specify a hostname, or
- username and hostname separated by <literal>@</literal>, to
- connect to. This will use SSH to talk to the remote systemd
- instance.</para>
+ <para>Takes one of <literal>full</literal> (the default),
+ <literal>enable-only</literal>,
+ <literal>disable-only</literal>. When used with the
+ <command>preset</command> or <command>preset-all</command>
+ commands, controls whether units shall be disabled and
+ enabled according to the preset rules, or only enabled, or
+ only disabled.</para>
</listitem>
</varlistentry>
- <varlistentry>
- <term><option>-M</option></term>
- <term><option>--machine=</option></term>
-
- <listitem><para>Execute the operation on a local
- container. Specify a container name to connect
- to.</para></listitem>
- </varlistentry>
-
<varlistentry>
<term><option>-n</option></term>
<term><option>--lines=</option></term>
</listitem>
</varlistentry>
+ <xi:include href="user-system-options.xml" xpointer="host" />
+ <xi:include href="user-system-options.xml" xpointer="machine" />
+
+ <xi:include href="standard-options.xml" xpointer="help" />
+ <xi:include href="standard-options.xml" xpointer="version" />
+ <xi:include href="standard-options.xml" xpointer="no-pager" />
</variablelist>
</refsect1>
<variablelist>
<varlistentry>
- <term><command>list-units <optional><replaceable>PATTERN...</replaceable></optional></command></term>
+ <term><command>list-units <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
<para>List known units (subject to limitations specified
</varlistentry>
<varlistentry>
- <term><command>list-sockets <optional><replaceable>PATTERN...</replaceable></optional></command></term>
+ <term><command>list-sockets <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
- <para>List socket units ordered by the listening address.
+ <para>List socket units ordered by listening address.
If one or more <replaceable>PATTERN</replaceable>s are
specified, only socket units matching one of them are
shown. Produces output similar to
[::]:22 sshd.socket sshd.service
kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
-5 sockets listed.
- </programlisting>
+5 sockets listed.</programlisting>
Note: because the addresses might contains spaces, this output
is not suitable for programmatic consumption.
</para>
<para>See also the options <option>--show-types</option>,
- <option>--all</option>, and <option>--failed</option>.</para>
+ <option>--all</option>, and <option>--state=</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>list-timers <optional><replaceable>PATTERN...</replaceable></optional></command></term>
+ <term><command>list-timers <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
<para>List timer units ordered by the time they elapse
</para>
<para>See also the options <option>--all</option> and
- <option>--failed</option>.</para>
+ <option>--state=</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>start <replaceable>NAME</replaceable>...</command></term>
+ <term><command>start <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Start (activate) one or more units specified on the
command line.</para>
+
+ <para>Note that glob patterns operate on a list of currently
+ loaded units. Units which are not active and are not in a
+ failed state usually are not loaded, and would not be
+ matched by any pattern. In addition, in case of
+ instantiated units, systemd is often unaware of the
+ instance name until the instance has been started. Therefore,
+ using glob patterns with <command>start</command>
+ has limited usefulness.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>stop <replaceable>NAME</replaceable>...</command></term>
+ <term><command>stop <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Stop (deactivate) one or more units specified on the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Asks all units listed on the command line to reload
file.</para>
<para>This command should not be confused with the
- <command>daemon-reload</command> or <command>load</command>
- commands.</para>
+ <command>daemon-reload</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
<listitem>
<para>Start the unit specified on the command line and its
- dependencies and stop all others.</para>
+ dependencies and stop all others. If a unit name with no
+ extension is given, an extension of
+ <literal>.target</literal> will be assumed.</para>
<para>This is similar to changing the runlevel in a
traditional init system. The <command>isolate</command>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>kill <replaceable>NAME</replaceable>...</command></term>
+ <term><command>kill <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Send a signal to one or more processes of the
unit. Use <option>--kill-who=</option> to select which
- process to kill. Use <option>--kill-mode=</option> to select
- the kill mode and <option>--signal=</option> to select the
- signal to send.</para>
+ process to kill. Use <option>--signal=</option> to select
+ the signal to send.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-active <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-active <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Check whether any of the specified units are active
- (i.e. running). Returns an exit code 0 if at least one is
- active, non-zero otherwise. Unless <option>--quiet</option>
- is specified, this will also print the current unit state to
- STDOUT.</para>
+ (i.e. running). Returns an exit code
+ <constant>0</constant> if at least one is active, or
+ non-zero otherwise. Unless <option>--quiet</option> is
+ specified, this will also print the current unit state to
+ standard output.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-failed <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-failed <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
- <para>Check whether any of the specified units are in a "failed" state.
- Returns an exit code 0 if at least one has failed, non-zero
- otherwise. Unless <option>--quiet</option> is specified, this
- will also print the current unit state to
- STDOUT.</para>
+ <para>Check whether any of the specified units are in a
+ "failed" state. Returns an exit code
+ <constant>0</constant> if at least one has failed,
+ non-zero otherwise. Unless <option>--quiet</option> is
+ specified, this will also print the current unit state to
+ standard output.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>status [<replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...]</command></term>
+ <term><command>status</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...]</optional></term>
<listitem>
<para>Show terse runtime status information about one or
more units, followed by most recent log data from the
- journal. If no units are specified, show all units (subject
- to limitations specified with <option>-t</option>). If a PID
- is passed, show information about the unit the process
- belongs to.</para>
+ journal. If no units are specified, show system status. If
+ combined with <option>--all</option>, also show the status of
+ all units (subject to limitations specified with
+ <option>-t</option>). If a PID is passed, show information
+ about the unit the process belongs to.</para>
<para>This function is intended to generate human-readable
- output. If you are looking for computer-parsable output, use
- <command>show</command> instead.</para>
+ output. If you are looking for computer-parsable output,
+ use <command>show</command> instead. By default this
+ function only shows 10 lines of output and ellipsizes
+ lines to fit in the terminal window. This can be changes
+ with <option>--lines</option> and <option>--full</option>,
+ see above. In addition, <command>journalctl
+ --unit=<replaceable>NAME</replaceable></command> or
+ <command>journalctl
+ --user-unit=<replaceable>NAME</replaceable></command> use
+ a similar filter for messages and might be more
+ convenient.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>show [<replaceable>NAME</replaceable>...|<replaceable>JOB</replaceable>...]</command></term>
+ <term><command>show</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>JOB</replaceable>...</optional></term>
<listitem>
<para>Show properties of one or more units, jobs, or the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>cat <replaceable>NAME</replaceable>...</command></term>
+ <term><command>cat <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Show backing files of one or more units. Prints the
</varlistentry>
<varlistentry>
- <term><command>help <replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...</command></term>
+ <term><command>help <replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...</command></term>
<listitem>
<para>Show manual pages for one or more units, if
</varlistentry>
<varlistentry>
- <term><command>reset-failed [<replaceable>NAME</replaceable>...]</command></term>
+ <term><command>reset-failed [<replaceable>PATTERN</replaceable>...]</command></term>
<listitem>
<para>Reset the <literal>failed</literal> state of the
</varlistentry>
<varlistentry>
- <term><command>list-dependencies <replaceable>NAME</replaceable></command></term>
+ <term>
+ <command>list-dependencies</command>
+ <optional><replaceable>NAME</replaceable></optional>
+ </term>
<listitem>
- <para>Shows required and wanted units of the specified
- unit. If no unit is specified,
- <filename>default.target</filename> is implied. Target units
- are recursively expanded. When <option>--all</option> is
- passed, all other units are recursively expanded as
- well.</para>
+ <para>Shows units required and wanted by the specified
+ unit. This recursively lists units following the
+ <varname>Requires=</varname>,
+ <varname>RequiresOverridable=</varname>,
+ <varname>Requisite=</varname>,
+ <varname>RequisiteOverridable=</varname>,
+ <varname>Wants=</varname>, <varname>BindsTo=</varname>
+ dependencies. If no unit is specified,
+ <filename>default.target</filename> is implied.</para>
+
+ <para>By default, only target units are recursively
+ expanded. When <option>--all</option> is passed, all other
+ units are recursively expanded as well.</para>
+
+ <para>Options <option>--reverse</option>,
+ <option>--after</option>, <option>--before</option>
+ may be used to change what types of dependencies
+ are shown.</para>
</listitem>
</varlistentry>
</variablelist>
the system, or for all future logins of all users, or only this
boot. Note that in the last case, no systemd daemon
configuration is reloaded.</para>
+
+ <para>Using <command>enable</command> on masked units
+ results in an error.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
- <varlistentry>
- <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term>
-
- <listitem>
- <para>Checks whether any of the specified unit files are
- enabled (as with <command>enable</command>). Returns an exit
- code of 0 if at least one is enabled, non-zero
- otherwise. Prints the current enable status. To suppress
- this output, use <option>--quiet</option>.</para>
- </listitem>
- </varlistentry>
-
<varlistentry>
<term><command>reenable <replaceable>NAME</replaceable>...</command></term>
command line, to the defaults configured in the preset
policy files. This has the same effect as
<command>disable</command> or <command>enable</command>,
- depending how the unit is listed in the preset files. For
- more information on the preset policy format, see
+ depending how the unit is listed in the preset files.</para>
+
+ <para>Use <option>--preset-mode=</option> to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.</para>
+
+ <para>For more information on the preset policy format,
+ see
<citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
For more information on the concept of presets, please
- consult the
- <ulink url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink>
+ consult the <ulink
+ url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink>
document.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>preset-all</command></term>
+
+ <listitem>
+ <para>Resets all installed unit files to the defaults
+ configured in the preset policy file (see above).</para>
+
+ <para>Use <option>--preset-mode=</option> to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Checks whether any of the specified unit files are
+ enabled (as with <command>enable</command>). Returns an
+ exit code of 0 if at least one is enabled, non-zero
+ otherwise. Prints the current enable status (see table).
+ To suppress this output, use <option>--quiet</option>.
+ </para>
+
+ <table>
+ <title>
+ <command>is-enabled</command> output
+ </title>
+
+ <tgroup cols='3'>
+ <thead>
+ <row>
+ <entry>Printed string</entry>
+ <entry>Meaning</entry>
+ <entry>Return value</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><literal>enabled</literal></entry>
+ <entry morerows='1'>Enabled through a symlink in <filename>.wants</filename> directory (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>0</entry>
+ </row>
+ <row>
+ <entry><literal>enabled-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>linked</literal></entry>
+ <entry morerows='1'>Made available through a symlink to the unit file (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>linked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>masked</literal></entry>
+ <entry morerows='1'>Disabled entirely (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>masked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>static</literal></entry>
+ <entry>Unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> section.</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>indirect</literal></entry>
+ <entry>Unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> section, listing other unit files that might be enabled.</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>disabled</literal></entry>
+ <entry>Unit file is not enabled.</entry>
+ <entry>1</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>mask <replaceable>NAME</replaceable>...</command></term>
<filename>/dev/null</filename>, making it impossible to
start them. This is a stronger version of
<command>disable</command>, since it prohibits all kinds of
- activation of the unit, including manual activation. Use
- this option with care. This honors the
+ activation of the unit, including enablement and manual
+ activation. Use this option with care. This honors the
<option>--runtime</option> option to only mask temporarily
- until the next reoobt of the system.</para>
+ until the next reboot of the system.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>add-wants <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+ <term><command>add-requires <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Adds <literal>Wants=</literal> resp. <literal>Requires=</literal>
+ dependency to the specified <replaceable>TARGET</replaceable> for
+ one or more units. </para>
+
+ <para>This command honors <option>--system</option>,
+ <option>--user</option>, <option>--runtime</option> and
+ <option>--global</option> in a similar way as
+ <command>enable</command>.</para>
+
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>edit <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Edit a drop-in snippet or a whole replacement file if
+ <option>--full</option> is specified, to extend or override the
+ specified unit.</para>
+
+ <para>Depending on whether <option>--system</option> (the default),
+ <option>--user</option>, or <option>--global</option> is specified,
+ this creates a drop-in file for each unit either for the system,
+ for the calling user or for all futures logins of all users. Then,
+ the editor (see the "Environment" section below) is invoked on
+ temporary files which will be written to the real location if the
+ editor exits successfully.</para>
+
+ <para>If <option>--full</option> is specified, this will copy the
+ original units instead of creating drop-in files.</para>
+
+ <para>If <option>--runtime</option> is specified, the changes will
+ be made temporarily in <filename>/run</filename> and they will be
+ lost on the next reboot.</para>
+
+ <para>If the temporary file is empty upon exit the modification of
+ the related unit is canceled</para>
+
+ <para>After the units have been edited, systemd configuration is
+ reloaded (in a way that is equivalent to <command>daemon-reload</command>).
+ </para>
+
+ <para>Note that this command cannot be used to remotely edit units
+ and that you cannot temporarily edit units which are in
+ <filename>/etc</filename> since they take precedence over
+ <filename>/run</filename>.</para>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>get-default</command></term>
<listitem>
- <para>Get the default target specified
- via <filename>default.target</filename> link.</para>
+ <para>Return the default target to boot into. This returns
+ the target unit name <filename>default.target</filename>
+ is aliased (symlinked) to.</para>
</listitem>
</varlistentry>
<term><command>set-default <replaceable>NAME</replaceable></command></term>
<listitem>
- <para>Set the default target to boot into. Command links
- <filename>default.target</filename> to the given unit.</para>
+ <para>Set the default target to boot into. This sets
+ (symlinks) the <filename>default.target</filename> alias
+ to the given target unit.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+ </refsect2>
+
+ <refsect2>
+ <title>Machine Commands</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><command>list-machines <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
+
+ <listitem>
+ <para>List the host and all running local containers with
+ their state. If one or more
+ <replaceable>PATTERN</replaceable>s are specified, only
+ containers matching one of them are shown.
+ </para>
</listitem>
</varlistentry>
</variablelist>
<listitem>
<para>Create a snapshot. If a snapshot name is specified,
the new snapshot will be named after it. If none is
- specified, an automatic snapshot name is generated. In either
- case, the snapshot name used is printed to STDOUT, unless
- <option>--quiet</option> is specified.</para>
+ specified, an automatic snapshot name is generated. In
+ either case, the snapshot name used is printed to standard
+ output, unless <option>--quiet</option> is specified.
+ </para>
<para>A snapshot refers to a saved state of the systemd
manager. It is implemented itself as a unit that is
</listitem>
</varlistentry>
<varlistentry>
- <term><command>delete <replaceable>NAME</replaceable>...</command></term>
+ <term><command>delete <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Remove a snapshot previously created with
specified value.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>import-environment <replaceable>VARIABLE</replaceable>...</command></term>
+
+ <listitem>
+ <para>Import all, one or more environment variables set on
+ the client into the systemd manager environment block. If
+ no arguments are passed, the entire environment block is
+ imported. Otherwise, a list of one or more environment
+ variable names should be passed, whose client-side values
+ are then imported into the manager's environment
+ block.</para>
+ </listitem>
+ </varlistentry>
</variablelist>
</refsect2>
<para>Reload systemd manager configuration. This will reload
all unit files and recreate the entire dependency
tree. While the daemon is being reloaded, all sockets systemd
- listens on on behalf of user configuration will stay
+ listens on behalf of user configuration will stay
accessible.</para> <para>This command should not be confused
- with the <command>load</command> or
- <command>reload</command> commands.</para>
+ with the <command>reload</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<title>System Commands</title>
<variablelist>
+ <varlistentry>
+ <term><command>is-system-running</command></term>
+
+ <listitem>
+ <para>Checks whether the system is operational. This
+ returns success when the system is fully up and running,
+ meaning not in startup, shutdown or maintenance
+ mode. Failure is returned otherwise. In addition, the
+ current state is printed in a short string to standard
+ output, see table below. Use <option>--quiet</option> to
+ suppress this output.</para>
+
+ <table>
+ <title>Manager Operational States</title>
+ <tgroup cols='2'>
+ <colspec colname='name' />
+ <colspec colname='description' />
+ <thead>
+ <row>
+ <entry>Name</entry>
+ <entry>Description</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><varname>initializing</varname></entry>
+ <entry><para>Early bootup, before
+ <filename>basic.target</filename> is reached
+ or the <varname>maintenance</varname> state entered.
+ </para></entry>
+ </row>
+ <row>
+ <entry><varname>starting</varname></entry>
+ <entry><para>Late bootup, before the job queue
+ becomes idle for the first time, or one of the
+ rescue targets are reached.</para></entry>
+ </row>
+ <row>
+ <entry><varname>running</varname></entry>
+ <entry><para>The system is fully
+ operational.</para></entry>
+ </row>
+ <row>
+ <entry><varname>degraded</varname></entry>
+ <entry><para>The system is operational but one or more
+ units failed.</para></entry>
+ </row>
+ <row>
+ <entry><varname>maintenance</varname></entry>
+ <entry><para>The rescue or emergency target is
+ active.</para></entry>
+ </row>
+ <row>
+ <entry><varname>stopping</varname></entry>
+ <entry><para>The manager is shutting
+ down.</para></entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>default</command></term>
<command>isolate default.target</command>.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>rescue</command></term>
<quote>firmware over the air</quote> update.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>kexec</command></term>
immediately followed by the reboot.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>exit</command></term>
with the <option>--user</option> option) and will fail
otherwise.</para>
</listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>switch-root <replaceable>ROOT</replaceable> <optional><replaceable>INIT</replaceable></optional></command></term>
+ <listitem>
+ <para>Switches to a different root directory and executes a
+ new system manager process below it. This is intended for
+ usage in initial RAM disks ("initrd"), and will transition
+ from the initrd's system manager process (a.k.a "init"
+ process) to the main system manager process. This call takes two
+ arguments: the directory that is to become the new root directory, and
+ the path to the new system manager binary below it to
+ execute as PID 1. If the latter is omitted or the empty
+ string, a systemd binary will automatically be searched for
+ and used as init. If the system manager path is omitted or
+ equal to the empty string, the state of the initrd's system
+ manager process is passed to the main system manager, which
+ allows later introspection of the state of the services
+ involved in the initrd boot.</para>
+ </listitem>
</varlistentry>
+
<varlistentry>
<term><command>suspend</command></term>
</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>hibernate</command></term>
</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>hybrid-sleep</command></term>
<filename>hybrid-sleep.target</filename> target.</para>
</listitem>
</varlistentry>
- <varlistentry>
- <term><command>switch-root <replaceable>ROOT</replaceable> <optional><replaceable>INIT</replaceable></optional></command></term>
-
- <listitem>
- <para>Switches to a different root directory and executes a
- new system manager process below it. This is intended for
- usage in initial RAM disks ("initrd"), and will transition
- from the initrd's system manager process (a.k.a "init"
- process) to the main system manager process. This call takes two
- arguments: the directory that is to become the new root directory, and
- the path to the new system manager binary below it to
- execute as PID 1. If the latter is omitted or the empty
- string, a systemd binary will automatically be searched for
- and used as init. If the system manager path is omitted or
- equal to the empty string, the state of the initrd's system
- manager process is passed to the main system manager, which
- allows later introspection of the state of the services
- involved in the initrd boot.</para>
- </listitem>
- </varlistentry>
</variablelist>
</refsect2>
<refsect2>
<title>Parameter Syntax</title>
- <para>For unit commands the specified
- <replaceable>NAME</replaceable> should be the full name of the
- unit, or an abbreviated name which is automatically extended with
- the <literal>.service</literal> suffix.
- <programlisting># systemctl start foo.service</programlisting> is equivalent to:
- <programlisting># systemctl start foo</programlisting>
- Note that (absolute) paths to device nodes are automatically converted to device unit names, and other (absolute) paths to mount unit names.
- <programlisting># systemctl status /dev/sda
-# systemctl status /home</programlisting> is equivalent to:
- <programlisting># systemctl status dev-sda.device
-# systemctl status home.mount</programlisting></para>
-
- <para>For unit file commands the
- specified <replaceable>NAME</replaceable> should be the full name
- of the unit file, or the absolute path to the unit file.
- <programlisting># systemctl link /path/to/foo.service</programlisting>
- </para>
+ <para>Unit commands listed above take either a single unit name
+ (designated as <replaceable>NAME</replaceable>), or multiple
+ unit specifications (designated as
+ <replaceable>PATTERN</replaceable>...). In the first case, the
+ unit name with or without a suffix must be given. If the suffix
+ is not specified, systemctl will append a suitable suffix,
+ <literal>.service</literal> by default, and a type-specific
+ suffix in case of commands which operate only on specific unit
+ types. For example,
+ <programlisting># systemctl start sshd</programlisting> and
+ <programlisting># systemctl start sshd.service</programlisting>
+ are equivalent, as are
+ <programlisting># systemctl isolate default</programlisting>
+ and
+ <programlisting># systemctl isolate default.target</programlisting>
+ Note that (absolute) paths to device nodes are automatically
+ converted to device unit names, and other (absolute) paths to
+ mount unit names.
+ <programlisting># systemctl status /dev/sda
+# systemctl status /home</programlisting>
+ are equivalent to:
+ <programlisting># systemctl status dev-sda.device
+# systemctl status home.mount</programlisting>
+ In the second case, shell-style globs will be matched against
+ currently loaded units; literal unit names, with or without
+ a suffix, will be treated as in the first case. This means that
+ literal unit names always refer to exactly one unit, but globs
+ may match zero units and this is not considered an error.</para>
+
+ <para>Glob patterns use
+ <citerefentry><refentrytitle>fnmatch</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ so normal shell-style globbing rules are used, and
+ <literal>*</literal>, <literal>?</literal>,
+ <literal>[]</literal> may be used. See
+ <citerefentry><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for more details. The patterns are matched against the names of
+ currently loaded units, and patterns which do not match anything
+ are silently skipped. For example:
+ <programlisting># systemctl stop sshd@*.service</programlisting>
+ will stop all <filename>sshd@.service</filename> instances.
+ </para>
+
+ <para>For unit file commands, the specified
+ <replaceable>NAME</replaceable> should be the full name of the
+ unit file, or the absolute path to the unit file:
+ <programlisting># systemctl enable foo.service</programlisting>
+ or
+ <programlisting># systemctl link /path/to/foo.service</programlisting>
+ </para>
</refsect2>
</refsect1>
<variablelist class='environment-variables'>
<varlistentry>
- <term><varname>$SYSTEMD_PAGER</varname></term>
-
- <listitem>
- <para>Pager to use when <option>--no-pager</option> is not
- given; overrides <varname>$PAGER</varname>. Setting this to
- an empty string or the value <literal>cat</literal> is
- equivalent to passing
- <option>--no-pager</option>.</para>
- </listitem>
+ <term><varname>$SYSTEMD_EDITOR</varname></term>
+
+ <listitem><para>Editor to use when editing units; overrides
+ <varname>$EDITOR</varname> and <varname>$VISUAL</varname>. If neither
+ <varname>$SYSTEMD_EDITOR</varname> nor <varname>$EDITOR</varname> nor
+ <varname>$VISUAL</varname> are present or if it is set to an empty
+ string or if their execution failed, systemctl will try to execute well
+ known editors in this order:
+ <citerefentry><refentrytitle>nano</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>vim</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>vi</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+ </para></listitem>
</varlistentry>
</variablelist>
+ <xi:include href="less-variables.xml" xpointer="pager"/>
+ <xi:include href="less-variables.xml" xpointer="less"/>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemadm</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.resource-management</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff