Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<refnamediv>
<refname>systemctl</refname>
- <refpurpose>Control the systemd system and session manager</refpurpose>
+ <refpurpose>Control the systemd system and service manager</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><command>systemctl</command> may be used to
introspect and control the state of the
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- system and session manager.</para>
+ system and service manager.</para>
</refsect1>
<refsect1>
text and exits.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>--version</option></term>
+
+ <listitem><para>Prints a short version
+ string and exits.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><option>--type=</option></term>
<term><option>-t</option></term>
<term><option>-p</option></term>
<listitem><para>When showing
- unit/job/manager information, limit
+ unit/job/manager properties, limit
display to certain properties as
specified as argument. If not
specified all set properties are
<listitem><para>When listing units,
show all units, regardless of their
state, including inactive units. When
- showing unit/job/manager information,
+ showing unit/job/manager properties,
show all properties regardless whether
they are set or not.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>--failed</option></term>
+
+ <listitem><para>When listing units,
+ show only failed units. Do not confuse
+ with
+ <option>--fail</option>.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><option>--full</option></term>
unfinished job, fail the command. If
this is not specified the requested
operation will replace the pending job,
- if necessary.</para></listitem>
+ if necessary. Do not confuse
+ with
+ <option>--failed</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--ignore-dependencies</option></term>
+
+ <listitem><para>When enqueuing a new
+ job ignore all its dependencies and
+ execute it immediately. If passed no
+ required units of the unit passed will
+ be pulled in, and no ordering
+ dependencies will be honoured. This is
+ mostly a debugging and rescue tool for
+ the administrator and should not be
+ used by
+ applications.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>Suppress output to
STDOUT in
<command>snapshot</command>,
- <command>check</command>,
+ <command>is-active</command>,
<command>enable</command> and
<command>disable</command>.</para></listitem>
</varlistentry>
enqueued and <command>systemctl</command> will
wait until it is completed. By passing this
argument it is only verified and
- enqueued.</para></listitem> </varlistentry>
+ enqueued.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-legend</option></term>
+
+ <listitem><para>Do not print a legend, i.e.
+ the column headers and the footer with hints.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--no-pager</option></term>
+
+ <listitem><para>Do not pipe output into a
+ pager.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><option>--system</option></term>
</varlistentry>
<varlistentry>
- <term><option>--session</option></term>
+ <term><option>--user</option></term>
<listitem><para>Talk to the systemd
- session manager of the calling user.</para></listitem>
+ manager of the calling user.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>When used with
<command>enable</command> and
<command>disable</command>, operate on the
- global session configuĊation
+ global user configuration
directory, thus enabling or disabling
a unit file globally for all future
- sessions of all users.</para></listitem>
+ logins of all users.</para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
- <term><option>--kill-mode=</option></term>
+ <term><option>--no-ask-password</option></term>
<listitem><para>When used with
- <command>kill</command>, choose the
- mode how to kill the selected
- processes. Must be one of
- <option>control-group</option>,
- <option>process-group</option> or
- <option>process</option> to select
- whether to kill the entire control
- group, the process group or only the
- selected process itself. If ommitted
- defaults to
- <option>control-group</option> if
- <option>--kill-who=all</option> is
- set, or <option>process</option>
- otherwise. You probably never need to
- use this switch.</para></listitem>
+ <command>start</command> and related
+ commands, disables asking for
+ passwords. Background services may
+ require input of a password or
+ passphrase string, for example to
+ unlock system hard disks or
+ cryptographic certificates. Unless
+ this option is specified and the
+ command is invoked from a terminal
+ <command>systemctl</command> will
+ query the user on the terminal for the
+ necessary secrets. Use this option to
+ switch this behavior off. In this case
+ the password must be supplied by some
+ other means (for example graphical
+ password agents) or the service might
+ fail. This also disables querying the
+ user for authentication for privileged
+ operations.</para></listitem>
</varlistentry>
<varlistentry>
<option>all</option> to select whether
to kill only the main process of the
unit, the control process or all
- processes of the unit. If ommitted
+ processes of the unit. If omitted
defaults to
<option>all</option>.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>---signal=</option></term>
+ <term><option>--signal=</option></term>
<term><option>-s</option></term>
<listitem><para>When used with
<command>kill</command>, choose which
signal to send to selected
processes. Must be one of the well
- know signal specifiers such as
+ known signal specifiers such as
SIGTERM, SIGINT or SIGSTOP. If
- ommitted defaults to
+ omitted defaults to
<option>SIGTERM</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><option>--force</option></term>
+ <term><option>-f</option></term>
<listitem><para>When used with
- <command>enable</command>, override any
+ <command>enable</command>, overwrite any
existing conflicting
symlinks.</para></listitem>
+
+ <listitem><para>When used with
+ <command>halt</command>,
+ <command>poweroff</command>,
+ <command>reboot</command> or
+ <command>kexec</command> execute the
+ selected operation without shutting
+ down all units. However, all processes
+ will be killed forcibly and all file
+ systems are unmounted or remounted
+ read-only. This is hence a drastic but
+ relatively safe option to request an
+ immediate reboot. If
+ <option>--force</option> is specified
+ twice for these operations, they will
+ be executed immediately without
+ terminating any processes or umounting
+ any file systems. Warning: specifying
+ <option>--force</option> twice with
+ any of these operations might result
+ in data loss.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--root=</option></term>
+
+ <listitem><para>When used with
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and
+ related commands), use alternative
+ root path when looking for unit
+ files.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--defaults</option></term>
+ <term><option>--runtime</option></term>
<listitem><para>When used with
- <command>disable</command>, ensures
- that only the symlinks created by
- <command>enable</command> are removed,
- not all symlinks pointing to the unit
- file that shall be
- disabled.</para></listitem>
+ <command>enable</command>/<command>disable</command>/<command>is-enabled</command> (and related commands), make
+ changes only temporarily, so that they
+ are dropped on the next reboot. This
+ will have the effect that changes are
+ not made in subdirectories of
+ <filename>/etc</filename> but in
+ <filename>/run</filename>, with
+ identical immediate effects, however,
+ since the latter is lost on reboot,
+ the changes are lost
+ too.</para></listitem>
</varlistentry>
+
+ <varlistentry>
+ <term><option>-H</option></term>
+ <term><option>--host</option></term>
+
+ <listitem><para>Execute operation
+ remotely. Specify a hostname, or
+ username and hostname separated by @,
+ to connect to. This will use SSH to
+ talk to the remote systemd
+ instance.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-P</option></term>
+ <term><option>--privileged</option></term>
+
+ <listitem><para>Acquire privileges via
+ PolicyKit before executing the
+ operation.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--lines=</option></term>
+ <term><option>-n</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> controls the
+ number of journal lines to show,
+ counting from the most recent
+ ones. Takes a positive integer
+ argument. Defaults to
+ 10.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--follow</option></term>
+ <term><option>-f</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> continously
+ prints new journal entries as they are
+ appended to the
+ journal.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--output=</option></term>
+ <term><option>-o</option></term>
+
+ <listitem><para>When used with
+ <command>status</command> controls the
+ formatting of the journal entries that
+ are shown. For the available choices
+ see
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. Defaults
+ to
+ <literal>short</literal>.</para></listitem>
+ </varlistentry>
+
</variablelist>
<para>The following commands are understood:</para>
<listitem><para>Restart one or more
units specified on the command
- line. If the units are not running yet
- the operation will
- fail.</para></listitem>
+ line if the units are running. Do
+ nothing if units are not running.
+ Note that for compatibility
+ with Red Hat init scripts
+ <command>condrestart</command> is
+ equivalent to this command.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>reload-or-restart [NAME...]</command></term>
+
+ <listitem><para>Reload one or more
+ units if they support it. If not,
+ restart them instead. If the units
+ are not running yet they will be
+ started.</para></listitem>
+ </varlistentry>
+ <varlistentry>
<term><command>reload-or-try-restart [NAME...]</command></term>
<listitem><para>Reload one or more
units if they support it. If not,
- restart them instead. Note that for
- compatibility with SysV and Red Hat
- init scripts
- <command>force-reload</command> and
- <command>condrestart</command> may be
- used as equivalent commands to
- <command>reload-or-try-restart</command>.</para></listitem>
+ restart them instead. Do nothing if
+ the units are not running. Note that
+ for compatibility with SysV init
+ scripts
+ <command>force-reload</command> is
+ equivalent to this
+ command.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>isolate [NAME]</command></term>
<term><command>is-active [NAME...]</command></term>
<listitem><para>Check whether any of
- the specified units is active
+ the specified units are active
(i.e. running). Returns an exit code
0 if at least one is active, non-zero
otherwise. Unless
<listitem><para>Show terse runtime
status information about one or more
- units. This function is intended to
- generate human-readable output. If you
- are looking for computer-parsable
- output, use <command>show</command>
- instead. If a PID is passed
- information about the unit the process
- of the PID belongs to is
- shown.</para></listitem>
+ units, followed by its most recent log
+ data from the journal. This function
+ is intended to generate human-readable
+ output. If you are looking for
+ computer-parsable output, use
+ <command>show</command> instead. If a
+ PID is passed information about the
+ unit the process of the PID belongs to
+ is shown.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>show [NAME...|JOB...]</command></term>
looking for formatted human-readable
output.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>man [NAME...|PID...]</command></term>
+ <listitem><para>Show manual pages for
+ one or more units, if available. If a
+ PID is passed the manual pages for the
+ unit the process of the PID belongs to
+ is shown.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><command>reset-failed [NAME...]</command></term>
command.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>list-unit-files</command></term>
+
+ <listitem><para>List installed unit files.
+ </para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>enable [NAME...]</command></term>
administrator is free to make
additional changes manually, by
placing or removing symlinks in the
- directory. This is particular useful
+ directory. This is particularly useful
to create configurations that deviate
from the suggested default
installation. In this case the
<para>Depending on whether
<option>--system</option>,
- <option>--session</option> or
+ <option>--user</option> or
<option>--global</option> is specified
this enables the unit for the system,
- for sessions of the calling user only
- or for all future session of all
+ for the calling user only
+ or for all future logins of all
users. Note that in the latter case no
systemd daemon configuration is
reloaded.</para>
configuration directory, and hence
undoes the changes made by
<command>enable</command>. Note
- however that this by default removes
+ however that this removes
all symlinks to the unit files
(i.e. including manual additions), not
just those actually created by
- <command>enable</command>. If only the
- symlinks that are suggested by default
- shall be removed, pass
- <option>--defaults</option>. This
+ <command>enable</command>. This call
implicitly reloads the systemd daemon
configuration after completing the
disabling of the units. Note that this
command does not implicitly stop the
units that is being disabled. If this
is desired an additional
- <command>stop</command>command should
+ <command>stop</command> command should
be executed afterwards.</para>
<para>This command will print the
<option>--quiet</option>.</para>
</listitem>
- <para>This command honours
+ <para>This command honors
<option>--system</option>,
- <option>--session</option>,
+ <option>--user</option>,
<option>--global</option> in a similar
way as
<command>enable</command>.</para>
(as with
<command>enable</command>). Returns an
exit code of 0 if at least one is
- enabled, non-zero
- otherwise.</para></listitem>
+ enabled, non-zero otherwise. Prints
+ the current enable status. To suppress
+ this output use
+ <option>--quiet</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>reenable [NAME...]</command></term>
+
+ <listitem><para>Reenable one or more
+ unit files, as specified on the
+ command line. This is a combination of
+ <command>disable</command> and
+ <command>enable</command> and is
+ useful to reset the symlinks a unit is
+ enabled with to the defaults
+ configured in the
+ <literal>[Install]</literal> section
+ of the unit file.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>preset [NAME...]</command></term>
+
+ <listitem><para>Reset one or more unit
+ files, as specified on the command
+ line, to the defaults configured in a
+ preset file. This has the same effect
+ as <command>disable</command> or
+ <command>enable</command>, depending
+ how the unit is listed in the preset
+ files.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>mask [NAME...]</command></term>
+
+ <listitem><para>Mask one or more unit
+ files, as specified on the command
+ line. This will link these units to
+ <filename>/dev/null</filename>, making
+ it impossible to start them. This is a stronger version
+ of <command>disable</command>, since
+ it prohibits all kinds of activation
+ of the unit, including manual
+ activation. Use this option with
+ care.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>unmask [NAME...]</command></term>
+
+ <listitem><para>Unmask one or more
+ unit files, as specified on the
+ command line. This will undo the
+ effect of
+ <command>mask</command>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>link [NAME...]</command></term>
+
+ <listitem><para>Link a unit file that
+ is not in the unit file search paths
+ into the unit file search path. This
+ requires an absolute path to a unit
+ file. The effect of this can be undone
+ with <command>disable</command>. The
+ effect of this command is that a unit
+ file is available for
+ <command>start</command> and other
+ commands although it isn't installed
+ directly in the unit search
+ path.</para>
+ </listitem>
</varlistentry>
<varlistentry>
<listitem><para>Cancel one or more
jobs specified on the command line by
their numeric job
- IDs. If not job id is specified cancels all jobs that are pending.</para></listitem>
- </varlistentry>
- <varlistentry>
- <term><command>monitor</command></term>
-
- <listitem><para>Monitor unit/job
- changes. This is mostly useful for
- debugging purposes and prints a line
- each time systemd loads or unloads a
- unit configuration file, or a unit
- property changes.</para></listitem>
+ IDs. If no job id is specified, cancel all pending jobs.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>dump</command></term>
<para>A snapshot refers to a saved
state of the systemd manager. It is
- implemented itself as unit that is
+ implemented itself as a unit that is
generated dynamically with this
command and has dependencies on all
units active at the time. At a later
configuration will stay
accessible.</para></listitem>
</varlistentry>
- <varlistentry>
- <term><command>daemon-exit</command></term>
-
- <listitem><para>Ask the systemd
- manager to quit. This is only
- supported for session managers
- (i.e. in conjunction with the
- <option>--session</option> option) and
- will fail otherwise.</para></listitem>
- </varlistentry>
<varlistentry>
<term><command>show-environment</command></term>
is only removed if it has the
specified value.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>default</command></term>
+ <listitem><para>Enter default
+ mode. This is mostly equivalent to
+ <command>start
+ default.target</command>.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>rescue</command></term>
+
+ <listitem><para>Enter rescue
+ mode. This is mostly equivalent to
+ <command>isolate
+ rescue.target</command> but also
+ prints a wall message to all
+ users.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>emergency</command></term>
+
+ <listitem><para>Enter emergency
+ mode. This is mostly equivalent to
+ <command>isolate
+ emergency.target</command> but also
+ prints a wall message to all
+ users.</para></listitem>
+ </varlistentry>
<varlistentry>
<term><command>halt</command></term>
system. This is mostly equivalent to
<command>start halt.target</command>
but also prints a wall message to all
- users.</para></listitem>
+ users. If combined with
+ <option>--force</option> shutdown of
+ all running services is skipped,
+ however all processes are killed and
+ all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the system halt. If
+ <option>--force</option> is specified
+ twice the the operation is immediately
+ executed without terminating any
+ processes or unmounting any file
+ systems. This may result in data
+ loss.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>poweroff</command></term>
power-off the system. This is mostly
equivalent to <command>start
poweroff.target</command> but also
- prints a wall message to all
- users.</para></listitem>
+ prints a wall message to all users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are
+ killed and all file systems are
+ unmounted or mounted read-only,
+ immediately followed by the powering
+ off. If <option>--force</option> is
+ specified twice the the operation is
+ immediately executed without
+ terminating any processes or
+ unmounting any file systems. This may
+ result in data loss.</para></listitem>
</varlistentry>
<varlistentry>
<term><command>reboot</command></term>
- <listitem><para>Shut down and
- reboot the system. This is mostly
- equivalent to <command>start
+ <listitem><para>Shut down and reboot
+ the system. This is mostly equivalent
+ to <command>start
reboot.target</command> but also
- prints a wall message to all
- users.</para></listitem>
+ prints a wall message to all users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are
+ killed and all file systems are
+ unmounted or mounted read-only,
+ immediately followed by the reboot. If
+ <option>--force</option> is specified
+ twice the the operation is immediately
+ executed without terminating any
+ processes or unmounting any file
+ systems. This may result in data
+ loss.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>default</command></term>
+ <term><command>kexec</command></term>
- <listitem><para>Enter default
- mode. This is mostly equivalent to
- <command>start
- default.target</command>.</para></listitem>
+ <listitem><para>Shut down and reboot
+ the system via kexec. This is mostly
+ equivalent to <command>start
+ kexec.target</command> but also prints
+ a wall message to all users. If
+ combined with <option>--force</option>
+ shutdown of all running services is
+ skipped, however all processes are killed
+ and all file systems are unmounted or
+ mounted read-only, immediately
+ followed by the
+ reboot.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>rescue</command></term>
+ <term><command>exit</command></term>
- <listitem><para>Enter rescue
- mode. This is mostly equivalent to
- <command>isolate
- rescue.target</command> but also
- prints a wall message to all
- users.</para></listitem>
+ <listitem><para>Ask the systemd
+ manager to quit. This is only
+ supported for user service managers
+ (i.e. in conjunction with the
+ <option>--user</option> option) and
+ will fail otherwise.</para></listitem>
</varlistentry>
<varlistentry>
- <term><command>emergency</command></term>
+ <term><command>suspend</command></term>
- <listitem><para>Enter emergency
- mode. This is mostly equivalent to
- <command>isolate
- emergency.target</command> but also
- prints a wall message to all
- users.</para></listitem>
+ <listitem><para>Suspend the system.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>hibernate</command></term>
+
+ <listitem><para>Hibernate the system.</para></listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>switch-root [ROOT] [INIT]</command></term>
+
+ <listitem><para>Switches to a
+ different root directory and executes
+ a new system manager process below
+ it. This is intended for usage in
+ initial RAM disks ("initrd"), and will
+ transition from the initrd's system
+ manager process (a.k.a "init" process)
+ to the main system manager
+ process. Takes two arguments: the
+ directory to make the new root
+ directory, and the path to the new
+ system manager binary below it to
+ execute as PID 1. If the latter is
+ ommitted or the empty string, a
+ systemd binary will automatically be
+ searched for and used as init. If the
+ system manager path is ommitted or
+ equal the empty string the state of
+ the initrd's system manager process is
+ passed to the main system manager,
+ which allows later introspection of the
+ state of the services involved in the
+ initrd boot.</para></listitem>
</varlistentry>
</variablelist>
code otherwise.</para>
</refsect1>
+ <refsect1>
+ <title>Environment</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><varname>$SYSTEMD_PAGER</varname></term>
+ <listitem><para>Pager to use when
+ <option>--no-pager</option> is not given;
+ overrides <varname>$PAGER</varname>. Setting
+ this to an empty string or the value
+ <literal>cat</literal> is equivalent to passing
+ <option>--no-pager</option>.</para></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemadm</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>
~ianmdlvl / elogind.git / blobdiff