-<?xml version='1.0'?> <!--*-nxml-*-->
+<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
-This file is part of systemd.
+ This file is part of systemd.
-Copyright 2010 Lennart Poettering
+ Copyright 2010 Lennart Poettering
-systemd is free software; you can redistribute it and/or modify it
-under the terms of the GNU Lesser General Public License as published by
-the Free Software Foundation; either version 2.1 of the License, or
-(at your option) any later version.
+ systemd is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
-systemd is distributed in the hope that it will be useful, but
-WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Lesser General Public License for more details.
+ systemd is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
-You should have received a copy of the GNU Lesser General Public License
-along with systemd; If not, see <http://www.gnu.org/licenses/>.
+ You should have received a copy of the GNU Lesser General Public License
+ along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
-<refentry id="systemctl">
+<refentry id="systemctl"
+ xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>systemctl</title>
<refsect1>
<title>Description</title>
- <para><command>systemctl</command> may be used to
- introspect and control the state of the
+ <para><command>systemctl</command> may be used to introspect and
+ control the state of the <literal>systemd</literal> system and
+ service manager. Please refer to
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- system and service manager.</para>
+ for an introduction into the basic concepts and functionality this
+ tool manages.</para>
</refsect1>
<refsect1>
<para>The following options are understood:</para>
<variablelist>
- <varlistentry>
- <term><option>-h</option></term>
- <term><option>--help</option></term>
-
- <listitem><para>Prints a short help
- text and exits.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--version</option></term>
-
- <listitem>
- <para>Prints a short version string and exits.</para>
- </listitem>
- </varlistentry>
-
<varlistentry>
<term><option>-t</option></term>
<term><option>--type=</option></term>
<term><option>--state=</option></term>
<listitem>
- <para>The argument should be a comma-separated list of unit LOAD,
- SUB, or ACTIVE states. When listing units, show only those
- in specified states.</para>
+ <para>The argument should be a comma-separated list of unit
+ LOAD, SUB, or ACTIVE states. When listing units, show only
+ those in specified states. Use <option>--state=failed</option>
+ to show only failed units.</para>
</listitem>
</varlistentry>
</varlistentry>
<varlistentry>
- <term><option>--reverse</option></term>
+ <term><option>-r</option></term>
+ <term><option>--recursive</option></term>
<listitem>
- <para>Show reverse dependencies between units with
- <command>list-dependencies</command>, i.e. units with
- dependencies of type <varname>Wants=</varname> or
- <varname>Requires=</varname> on the given unit.
- </para>
+ <para>When listing units, also show units of local
+ containers. Units of local containers will be prefixed with
+ the container name, separated by a single colon character
+ (<literal>:</literal>).</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>--after</option></term>
- <term><option>--before</option></term>
+ <term><option>--reverse</option></term>
<listitem>
- <para>Show which units are started after or before
- with <command>list-dependencies</command>, respectively.
+ <para>Show reverse dependencies between units with
+ <command>list-dependencies</command>, i.e. follow
+ dependencies of type <varname>WantedBy=</varname>,
+ <varname>RequiredBy=</varname>,
+ <varname>RequiredByOverrridable=</varname>,
+ <varname>PartOf=</varname>, <varname>BoundBy=</varname>,
+ instead of <varname>Wants=</varname> and similar.
</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>-l</option></term>
- <term><option>--full</option></term>
+ <term><option>--after</option></term>
<listitem>
- <para>Do not ellipsize unit names, process tree entries, and
- truncate unit descriptions in the output of
- <command>list-units</command> and
- <command>list-jobs</command>.</para>
+ <para>With <command>list-dependencies</command>, show the
+ units that are ordered before the specified unit. In other
+ words, recursively list units following the
+ <varname>After=</varname> dependency.</para>
+
+ <para>Note that any <varname>After=</varname> dependency is
+ automatically mirrored to create a
+ <varname>Before=</varname> dependency. Temporal dependencies
+ may be specified explicitly, but are also created implicitly
+ for units which are <varname>WantedBy=</varname> targets
+ (see
+ <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>),
+ and as a result of other directives (for example
+ <varname>RequiresMountsFor=</varname>). Both explicitly
+ and implicitly introduced dependencies are shown with
+ <command>list-dependencies</command>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>--fail</option></term>
+ <term><option>--before</option></term>
<listitem>
- <para>If the requested operation conflicts with a pending
- unfinished job, fail the command. If this is not specified,
- the requested operation will replace the pending job, if
- necessary. Do not confuse with
- <option>--failed</option>.</para>
+ <para>With <command>list-dependencies</command>, show the
+ units that are ordered after the specified unit. In other
+ words, recursively list units following the
+ <varname>Before=</varname> dependency.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>--show-types</option></term>
+ <term><option>-l</option></term>
+ <term><option>--full</option></term>
<listitem>
- <para>When showing sockets, show the type of the socket.</para>
+ <para>Do not ellipsize unit names, process tree entries,
+ journal output, or truncate unit descriptions in the output
+ of <command>status</command>, <command>list-units</command>,
+ <command>list-jobs</command>, and
+ <command>list-timers</command>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>--irreversible</option></term>
+ <term><option>--show-types</option></term>
<listitem>
- <para>Mark this transaction's jobs as irreversible. This prevents
- future conflicting transactions from replacing these jobs.
- The jobs can still be cancelled using the <command>cancel</command>
- command.</para>
+ <para>When showing sockets, show the type of the socket.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><option>--ignore-dependencies</option></term>
+ <term><option>--job-mode=</option></term>
<listitem>
- <para>When enqueuing a new job, ignore all its dependencies
- and execute it immediately. If passed, no required units of
- the unit passed will be pulled in, and no ordering
- dependencies will be honored. This is mostly a debugging and
- rescue tool for the administrator and should not be used by
- applications.</para>
+ <para>When queuing a new job, this option controls how to deal with
+ already queued jobs. It takes one of <literal>fail</literal>,
+ <literal>replace</literal>,
+ <literal>replace-irreversibly</literal>,
+ <literal>isolate</literal>,
+ <literal>ignore-dependencies</literal>,
+ <literal>ignore-requirements</literal> or
+ <literal>flush</literal>. Defaults to
+ <literal>replace</literal>, except when the
+ <command>isolate</command> command is used which implies the
+ <literal>isolate</literal> job mode.</para>
+
+ <para>If <literal>fail</literal> is specified and a requested
+ operation conflicts with a pending job (more specifically:
+ causes an already pending start job to be reversed into a stop
+ job or vice versa), cause the operation to fail.</para>
+
+ <para>If <literal>replace</literal> (the default) is
+ specified, any conflicting pending job will be replaced, as
+ necessary.</para>
+
+ <para>If <literal>replace-irreversibly</literal> is specified,
+ operate like <literal>replace</literal>, but also mark the new
+ jobs as irreversible. This prevents future conflicting
+ transactions from replacing these jobs (or even being enqueued
+ while the irreversible jobs are still pending). Irreversible
+ jobs can still be cancelled using the <command>cancel</command>
+ command.</para>
+
+ <para><literal>isolate</literal> is only valid for start
+ operations and causes all other units to be stopped when the
+ specified unit is started. This mode is always used when the
+ <command>isolate</command> command is used.</para>
+
+ <para><literal>flush</literal> will cause all queued jobs to
+ be canceled when the new job is enqueued.</para>
+
+ <para>If <literal>ignore-dependencies</literal> is specified,
+ then all unit dependencies are ignored for this new job and
+ the operation is executed immediately. If passed, no required
+ units of the unit passed will be pulled in, and no ordering
+ dependencies will be honored. This is mostly a debugging and
+ rescue tool for the administrator and should not be used by
+ applications.</para>
+
+ <para><literal>ignore-requirements</literal> is similar to
+ <literal>ignore-dependencies</literal>, but only causes the
+ requirement dependencies to be ignored, the ordering
+ dependencies will still be honoured.</para>
</listitem>
+
</varlistentry>
<varlistentry>
sleep state. Any user may take these locks and privileged
users may override these locks. If any locks are taken,
shutdown and sleep state requests will normally fail
- (regardless if privileged or not) and a list of active locks
+ (regardless of whether privileged or not) and a list of active locks
is printed. However, if <option>--ignore-inhibitors</option>
is specified, the locks are ignored and not printed, and the
operation attempted anyway, possibly requiring additional
<command>snapshot</command>,
<command>is-active</command>,
<command>is-failed</command>,
+ <command>is-enabled</command>,
+ <command>is-system-running</command>,
<command>enable</command> and
<command>disable</command>.</para>
</listitem>
</listitem>
</varlistentry>
- <varlistentry>
- <term><option>--no-legend</option></term>
+ <xi:include href="user-system-options.xml" xpointer="user" />
+ <xi:include href="user-system-options.xml" xpointer="system" />
- <listitem>
- <para>Do not print a legend, i.e. the column headers and
- the footer with hints.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--no-pager</option></term>
-
- <listitem>
- <para>Do not pipe output into a pager.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--system</option></term>
-
- <listitem>
- <para>Talk to the systemd system manager. (Default)</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>--user</option></term>
-
- <listitem>
- <para>Talk to the systemd manager of the calling
- user.</para>
- </listitem>
- </varlistentry>
+ <!-- we do not document -failed here, as it has been made
+ redundant by -state=failed, which it predates. To keep
+ things simple we only document the new switch, while
+ keeping the old one around for compatibility only. -->
<varlistentry>
<term><option>--no-wall</option></term>
querying the user for authentication for privileged
operations.</para>
</listitem>
-
</varlistentry>
<varlistentry>
<listitem>
<para>When used with <command>kill</command>, choose which
- processes to kill. Must be one of <option>main</option>,
- <option>control</option> or <option>all</option> to select
- whether to kill only the main process of the unit, the
- control process or all processes of the unit. If omitted,
- defaults to <option>all</option>.</para>
+ processes to send a signal to. Must be one of
+ <option>main</option>, <option>control</option> or
+ <option>all</option> to select whether to kill only the main
+ process, the control process or all processes of the
+ unit. The main process of the unit is the one that defines
+ the life-time of it. A control process of a unit is one that
+ is invoked by the manager to induce state changes of it. For
+ example, all processes started due to the
+ <varname>ExecStartPre=</varname>,
+ <varname>ExecStop=</varname> or
+ <varname>ExecReload=</varname> settings of service units are
+ control processes. Note that there is only one control
+ process per unit at a time, as only one state change is
+ executed at a time. For services of type
+ <varname>Type=forking</varname>, the initial process started
+ by the manager for <varname>ExecStart=</varname> is a
+ control process, while the process ultimately forked off by
+ that one is then considered the main process of the unit (if
+ it can be determined). This is different for service units
+ of other types, where the process forked off by the manager
+ for <varname>ExecStart=</varname> is always the main process
+ itself. A service unit consists of zero or one main process,
+ zero or one control process plus any number of additional
+ processes. Not all unit types manage processes of these
+ types however. For example, for mount units, control processes
+ are defined (which are the invocations of
+ <filename>/usr/bin/mount</filename> and
+ <filename>/usr/bin/umount</filename>), but no main process
+ is defined. If omitted, defaults to
+ <option>all</option>.</para>
</listitem>
</varlistentry>
safe option to request an immediate reboot. If
<option>--force</option> is specified twice for these
operations, they will be executed immediately without
- terminating any processes or umounting any file
+ terminating any processes or unmounting any file
systems. Warning: specifying <option>--force</option> twice
with any of these operations might result in data
loss.</para>
<listitem>
<para>When used with <command>enable</command>,
- <command>disable</command>, <command>is-enabled</command>
+ <command>disable</command>, <command>edit</command>,
(and related commands), make changes only temporarily, so
that they are lost on the next reboot. This will have the
effect that changes are not made in subdirectories of
with identical immediate effects, however, since the latter
is lost on reboot, the changes are lost too.</para>
- <para>Similar, when used with
+ <para>Similarly, when used with
<command>set-property</command>, make changes only
temporarily, so that they are lost on the next
reboot.</para>
</varlistentry>
<varlistentry>
- <term><option>-H</option></term>
- <term><option>--host</option></term>
-
- <listitem>
- <para>Execute operation remotely. Specify a hostname, or
- username and hostname separated by <literal>@</literal>, to connect to. This
- will use SSH to talk to the remote systemd
- instance.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term><option>-P</option></term>
- <term><option>--privileged</option></term>
+ <term><option>--preset-mode=</option></term>
<listitem>
- <para>Acquire privileges via PolicyKit before executing the
- operation.</para>
+ <para>Takes one of <literal>full</literal> (the default),
+ <literal>enable-only</literal>,
+ <literal>disable-only</literal>. When used with the
+ <command>preset</command> or <command>preset-all</command>
+ commands, controls whether units shall be disabled and
+ enabled according to the preset rules, or only enabled, or
+ only disabled.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
+ <xi:include href="user-system-options.xml" xpointer="host" />
+ <xi:include href="user-system-options.xml" xpointer="machine" />
+
+ <xi:include href="standard-options.xml" xpointer="no-pager" />
+ <xi:include href="standard-options.xml" xpointer="no-legend" />
+ <xi:include href="standard-options.xml" xpointer="help" />
+ <xi:include href="standard-options.xml" xpointer="version" />
</variablelist>
</refsect1>
<variablelist>
<varlistentry>
- <term><command>list-units</command></term>
+ <term><command>list-units <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
<para>List known units (subject to limitations specified
- with <option>-t</option>).</para>
+ with <option>-t</option>). If one or more
+ <replaceable>PATTERN</replaceable>s are specified, only
+ units matching one of them are shown.</para>
<para>This is the default command.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>list-sockets</command></term>
+ <term><command>list-sockets <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
- <para>List socket units ordered by the listening address. Produces output
- similar to
+ <para>List socket units ordered by listening address.
+ If one or more <replaceable>PATTERN</replaceable>s are
+ specified, only socket units matching one of them are
+ shown. Produces output similar to
<programlisting>
LISTEN UNIT ACTIVATES
/dev/initctl systemd-initctl.socket systemd-initctl.service
[::]:22 sshd.socket sshd.service
kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
-5 sockets listed.
- </programlisting>
+5 sockets listed.</programlisting>
Note: because the addresses might contains spaces, this output
is not suitable for programmatic consumption.
</para>
<para>See also the options <option>--show-types</option>,
- <option>--all</option>, and <option>--failed</option>.</para>
+ <option>--all</option>, and <option>--state=</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>start <replaceable>NAME</replaceable>...</command></term>
+ <term><command>list-timers <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
+
+ <listitem>
+ <para>List timer units ordered by the time they elapse
+ next. If one or more <replaceable>PATTERN</replaceable>s
+ are specified, only units matching one of them are shown.
+ </para>
+
+ <para>See also the options <option>--all</option> and
+ <option>--state=</option>.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>start <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Start (activate) one or more units specified on the
command line.</para>
+
+ <para>Note that glob patterns operate on a list of currently
+ loaded units. Units which are not active and are not in a
+ failed state usually are not loaded, and would not be
+ matched by any pattern. In addition, in case of
+ instantiated units, systemd is often unaware of the
+ instance name until the instance has been started. Therefore,
+ using glob patterns with <command>start</command>
+ has limited usefulness.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>stop <replaceable>NAME</replaceable>...</command></term>
+ <term><command>stop <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Stop (deactivate) one or more units specified on the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Asks all units listed on the command line to reload
file.</para>
<para>This command should not be confused with the
- <command>daemon-reload</command> or <command>load</command>
- commands.</para>
+ <command>daemon-reload</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
<listitem>
<para>Start the unit specified on the command line and its
- dependencies and stop all others.</para>
+ dependencies and stop all others. If a unit name with no
+ extension is given, an extension of
+ <literal>.target</literal> will be assumed.</para>
<para>This is similar to changing the runlevel in a
traditional init system. The <command>isolate</command>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>kill <replaceable>NAME</replaceable>...</command></term>
+ <term><command>kill <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Send a signal to one or more processes of the
unit. Use <option>--kill-who=</option> to select which
- process to kill. Use <option>--kill-mode=</option> to select
- the kill mode and <option>--signal=</option> to select the
- signal to send.</para>
+ process to kill. Use <option>--signal=</option> to select
+ the signal to send.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-active <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-active <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Check whether any of the specified units are active
- (i.e. running). Returns an exit code 0 if at least one is
- active, non-zero otherwise. Unless <option>--quiet</option>
- is specified, this will also print the current unit state to
- STDOUT.</para>
+ (i.e. running). Returns an exit code
+ <constant>0</constant> if at least one is active, or
+ non-zero otherwise. Unless <option>--quiet</option> is
+ specified, this will also print the current unit state to
+ standard output.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-failed <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-failed <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
- <para>Check whether any of the specified units are in a "failed" state.
- Returns an exit code 0 if at least one has failed, non-zero
- otherwise. Unless <option>--quiet</option> is specified, this
- will also print the current unit state to
- STDOUT.</para>
+ <para>Check whether any of the specified units are in a
+ "failed" state. Returns an exit code
+ <constant>0</constant> if at least one has failed,
+ non-zero otherwise. Unless <option>--quiet</option> is
+ specified, this will also print the current unit state to
+ standard output.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>status [<replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...]</command></term>
+ <term><command>status</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...]</optional></term>
<listitem>
<para>Show terse runtime status information about one or
more units, followed by most recent log data from the
- journal. If no units are specified, show all units (subject
- to limitations specified with <option>-t</option>). If a PID
- is passed, show information about the unit the process
- belongs to.</para>
+ journal. If no units are specified, show system status. If
+ combined with <option>--all</option>, also show the status of
+ all units (subject to limitations specified with
+ <option>-t</option>). If a PID is passed, show information
+ about the unit the process belongs to.</para>
<para>This function is intended to generate human-readable
- output. If you are looking for computer-parsable output, use
- <command>show</command> instead.</para>
+ output. If you are looking for computer-parsable output,
+ use <command>show</command> instead. By default this
+ function only shows 10 lines of output and ellipsizes
+ lines to fit in the terminal window. This can be changes
+ with <option>--lines</option> and <option>--full</option>,
+ see above. In addition, <command>journalctl
+ --unit=<replaceable>NAME</replaceable></command> or
+ <command>journalctl
+ --user-unit=<replaceable>NAME</replaceable></command> use
+ a similar filter for messages and might be more
+ convenient.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>show [<replaceable>NAME</replaceable>...|<replaceable>JOB</replaceable>...]</command></term>
+ <term><command>show</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>JOB</replaceable>...</optional></term>
<listitem>
<para>Show properties of one or more units, jobs, or the
human-readable output.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>cat <replaceable>PATTERN</replaceable>...</command></term>
+ <listitem>
+ <para>Show backing files of one or more units. Prints the
+ "fragment" and "drop-ins" (source files) of units. Each
+ file is preceded by a comment which includes the file
+ name.</para>
+ </listitem>
+ </varlistentry>
<varlistentry>
<term><command>set-property <replaceable>NAME</replaceable> <replaceable>ASSIGNMENT</replaceable>...</command></term>
</varlistentry>
<varlistentry>
- <term><command>help <replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...</command></term>
+ <term><command>help <replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...</command></term>
<listitem>
<para>Show manual pages for one or more units, if
</varlistentry>
<varlistentry>
- <term><command>reset-failed [<replaceable>NAME</replaceable>...]</command></term>
+ <term><command>reset-failed [<replaceable>PATTERN</replaceable>...]</command></term>
<listitem>
<para>Reset the <literal>failed</literal> state of the
</varlistentry>
<varlistentry>
- <term><command>list-dependencies <replaceable>NAME</replaceable></command></term>
+ <term>
+ <command>list-dependencies</command>
+ <optional><replaceable>NAME</replaceable></optional>
+ </term>
<listitem>
- <para>Shows required and wanted units of the specified
- unit. If no unit is specified,
- <filename>default.target</filename> is implied. Target units
- are recursively expanded. When <option>--all</option> is
- passed, all other units are recursively expanded as
- well.</para>
+ <para>Shows units required and wanted by the specified
+ unit. This recursively lists units following the
+ <varname>Requires=</varname>,
+ <varname>RequiresOverridable=</varname>,
+ <varname>Requisite=</varname>,
+ <varname>RequisiteOverridable=</varname>,
+ <varname>Wants=</varname>, <varname>BindsTo=</varname>
+ dependencies. If no unit is specified,
+ <filename>default.target</filename> is implied.</para>
+
+ <para>By default, only target units are recursively
+ expanded. When <option>--all</option> is passed, all other
+ units are recursively expanded as well.</para>
+
+ <para>Options <option>--reverse</option>,
+ <option>--after</option>, <option>--before</option>
+ may be used to change what types of dependencies
+ are shown.</para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<varlistentry>
- <term><command>list-unit-files</command></term>
+ <term><command>list-unit-files <optional><replaceable>PATTERN...</replaceable></optional></command></term>
<listitem>
- <para>List installed unit files.</para>
+ <para>List installed unit files. If one or more
+ <replaceable>PATTERN</replaceable>s are specified, only
+ units whose filename (just the last component of the path)
+ matches one of them are shown.</para>
</listitem>
</varlistentry>
<para>Depending on whether <option>--system</option>,
<option>--user</option>, <option>--runtime</option>,
- or<option>--global</option>, is specified, this enables the unit
+ or <option>--global</option> is specified, this enables the unit
for the system, for the calling user only, for only this boot of
the system, or for all future logins of all users, or only this
boot. Note that in the last case, no systemd daemon
configuration is reloaded.</para>
+
+ <para>Using <command>enable</command> on masked units
+ results in an error.</para>
</listitem>
</varlistentry>
</para>
<para>This command honors <option>--system</option>,
- <option>--user</option>, <option>--runtime</option>,
+ <option>--user</option>, <option>--runtime</option> and
<option>--global</option> in a similar way as
<command>enable</command>.</para>
</listitem>
</varlistentry>
- <varlistentry>
- <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term>
-
- <listitem>
- <para>Checks whether any of the specified unit files are
- enabled (as with <command>enable</command>). Returns an exit
- code of 0 if at least one is enabled, non-zero
- otherwise. Prints the current enable status. To suppress
- this output, use <option>--quiet</option>.</para>
- </listitem>
- </varlistentry>
-
<varlistentry>
<term><command>reenable <replaceable>NAME</replaceable>...</command></term>
command line, to the defaults configured in the preset
policy files. This has the same effect as
<command>disable</command> or <command>enable</command>,
- depending how the unit is listed in the preset files. For
- more information on the preset policy format, see
+ depending how the unit is listed in the preset files.</para>
+
+ <para>Use <option>--preset-mode=</option> to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.</para>
+
+ <para>For more information on the preset policy format,
+ see
<citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
For more information on the concept of presets, please
- consult the
- <ulink url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink>
+ consult the <ulink
+ url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink>
document.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>preset-all</command></term>
+
+ <listitem>
+ <para>Resets all installed unit files to the defaults
+ configured in the preset policy file (see above).</para>
+
+ <para>Use <option>--preset-mode=</option> to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Checks whether any of the specified unit files are
+ enabled (as with <command>enable</command>). Returns an
+ exit code of 0 if at least one is enabled, non-zero
+ otherwise. Prints the current enable status (see table).
+ To suppress this output, use <option>--quiet</option>.
+ </para>
+
+ <table>
+ <title>
+ <command>is-enabled</command> output
+ </title>
+
+ <tgroup cols='3'>
+ <thead>
+ <row>
+ <entry>Printed string</entry>
+ <entry>Meaning</entry>
+ <entry>Return value</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><literal>enabled</literal></entry>
+ <entry morerows='1'>Enabled through a symlink in <filename>.wants</filename> directory (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>0</entry>
+ </row>
+ <row>
+ <entry><literal>enabled-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>linked</literal></entry>
+ <entry morerows='1'>Made available through a symlink to the unit file (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>linked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>masked</literal></entry>
+ <entry morerows='1'>Disabled entirely (permanently or just in <filename>/run</filename>).</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>masked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>static</literal></entry>
+ <entry>Unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> section.</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>indirect</literal></entry>
+ <entry>Unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> section, listing other unit files that might be enabled.</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>disabled</literal></entry>
+ <entry>Unit file is not enabled.</entry>
+ <entry>1</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>mask <replaceable>NAME</replaceable>...</command></term>
<filename>/dev/null</filename>, making it impossible to
start them. This is a stronger version of
<command>disable</command>, since it prohibits all kinds of
- activation of the unit, including manual activation. Use
- this option with care. This honors the
- <option>--runtime</option> option, to only mask temporarily
- until the next reoobt of the system.</para>
+ activation of the unit, including enablement and manual
+ activation. Use this option with care. This honors the
+ <option>--runtime</option> option to only mask temporarily
+ until the next reboot of the system.</para>
</listitem>
</varlistentry>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>add-wants <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+ <term><command>add-requires <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Adds <literal>Wants=</literal> resp. <literal>Requires=</literal>
+ dependency to the specified <replaceable>TARGET</replaceable> for
+ one or more units. </para>
+
+ <para>This command honors <option>--system</option>,
+ <option>--user</option>, <option>--runtime</option> and
+ <option>--global</option> in a similar way as
+ <command>enable</command>.</para>
+
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><command>edit <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Edit a drop-in snippet or a whole replacement file if
+ <option>--full</option> is specified, to extend or override the
+ specified unit.</para>
+
+ <para>Depending on whether <option>--system</option> (the default),
+ <option>--user</option>, or <option>--global</option> is specified,
+ this creates a drop-in file for each unit either for the system,
+ for the calling user or for all futures logins of all users. Then,
+ the editor (see the "Environment" section below) is invoked on
+ temporary files which will be written to the real location if the
+ editor exits successfully.</para>
+
+ <para>If <option>--full</option> is specified, this will copy the
+ original units instead of creating drop-in files.</para>
+
+ <para>If <option>--runtime</option> is specified, the changes will
+ be made temporarily in <filename>/run</filename> and they will be
+ lost on the next reboot.</para>
+
+ <para>If the temporary file is empty upon exit the modification of
+ the related unit is canceled</para>
+
+ <para>After the units have been edited, systemd configuration is
+ reloaded (in a way that is equivalent to <command>daemon-reload</command>).
+ </para>
+
+ <para>Note that this command cannot be used to remotely edit units
+ and that you cannot temporarily edit units which are in
+ <filename>/etc</filename> since they take precedence over
+ <filename>/run</filename>.</para>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>get-default</command></term>
<listitem>
- <para>Get the default target specified
- via <filename>default.target</filename> link.</para>
+ <para>Return the default target to boot into. This returns
+ the target unit name <filename>default.target</filename>
+ is aliased (symlinked) to.</para>
</listitem>
</varlistentry>
<term><command>set-default <replaceable>NAME</replaceable></command></term>
<listitem>
- <para>Set the default target to boot into. Command links
- <filename>default.target</filename> to the given unit.</para>
+ <para>Set the default target to boot into. This sets
+ (symlinks) the <filename>default.target</filename> alias
+ to the given target unit.</para>
+ </listitem>
+ </varlistentry>
+
+ </variablelist>
+ </refsect2>
+
+ <refsect2>
+ <title>Machine Commands</title>
+
+ <variablelist>
+ <varlistentry>
+ <term><command>list-machines <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
+
+ <listitem>
+ <para>List the host and all running local containers with
+ their state. If one or more
+ <replaceable>PATTERN</replaceable>s are specified, only
+ containers matching one of them are shown.
+ </para>
</listitem>
</varlistentry>
</variablelist>
<variablelist>
<varlistentry>
- <term><command>list-jobs</command></term>
+ <term><command>list-jobs <optional><replaceable>PATTERN...</replaceable></optional></command></term>
<listitem>
- <para>List jobs that are in progress.</para>
+ <para>List jobs that are in progress. If one or more
+ <replaceable>PATTERN</replaceable>s are specified, only
+ jobs for units matching one of them are shown.</para>
</listitem>
</varlistentry>
<varlistentry>
<variablelist>
<varlistentry>
- <term><command>snapshot [<replaceable>NAME</replaceable>]</command></term>
+ <term><command>snapshot <optional><replaceable>NAME</replaceable></optional></command></term>
<listitem>
<para>Create a snapshot. If a snapshot name is specified,
the new snapshot will be named after it. If none is
- specified, an automatic snapshot name is generated. In either
- case, the snapshot name used is printed to STDOUT, unless
- <option>--quiet</option> is specified.</para>
+ specified, an automatic snapshot name is generated. In
+ either case, the snapshot name used is printed to standard
+ output, unless <option>--quiet</option> is specified.
+ </para>
<para>A snapshot refers to a saved state of the systemd
manager. It is implemented itself as a unit that is
</listitem>
</varlistentry>
<varlistentry>
- <term><command>delete <replaceable>NAME</replaceable>...</command></term>
+ <term><command>delete <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Remove a snapshot previously created with
specified value.</para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term>
+ <command>import-environment</command>
+ <optional><replaceable>VARIABLE...</replaceable></optional>
+ </term>
+
+ <listitem>
+ <para>Import all, one or more environment variables set on
+ the client into the systemd manager environment block. If
+ no arguments are passed, the entire environment block is
+ imported. Otherwise, a list of one or more environment
+ variable names should be passed, whose client-side values
+ are then imported into the manager's environment
+ block.</para>
+ </listitem>
+ </varlistentry>
</variablelist>
</refsect2>
<term><command>daemon-reload</command></term>
<listitem>
- <para>Reload systemd manager configuration. This will reload
- all unit files and recreate the entire dependency
- tree. While the daemon is being reloaded, all sockets systemd
- listens on on behalf of user configuration will stay
- accessible.</para> <para>This command should not be confused
- with the <command>load</command> or
- <command>reload</command> commands.</para>
+ <para>Reload systemd manager configuration. This will
+ rerun all generators (see
+ <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>),
+ reload all unit files, and recreate the entire dependency
+ tree. While the daemon is being reloaded, all sockets
+ systemd listens on behalf of user configuration will stay
+ accessible.</para>
+
+ <para>This command should not be confused with the
+ <command>reload</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<title>System Commands</title>
<variablelist>
+ <varlistentry>
+ <term><command>is-system-running</command></term>
+
+ <listitem>
+ <para>Checks whether the system is operational. This
+ returns success when the system is fully up and running,
+ meaning not in startup, shutdown or maintenance
+ mode. Failure is returned otherwise. In addition, the
+ current state is printed in a short string to standard
+ output, see table below. Use <option>--quiet</option> to
+ suppress this output.</para>
+
+ <table>
+ <title>Manager Operational States</title>
+ <tgroup cols='2'>
+ <colspec colname='name' />
+ <colspec colname='description' />
+ <thead>
+ <row>
+ <entry>Name</entry>
+ <entry>Description</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><varname>initializing</varname></entry>
+ <entry><para>Early bootup, before
+ <filename>basic.target</filename> is reached
+ or the <varname>maintenance</varname> state entered.
+ </para></entry>
+ </row>
+ <row>
+ <entry><varname>starting</varname></entry>
+ <entry><para>Late bootup, before the job queue
+ becomes idle for the first time, or one of the
+ rescue targets are reached.</para></entry>
+ </row>
+ <row>
+ <entry><varname>running</varname></entry>
+ <entry><para>The system is fully
+ operational.</para></entry>
+ </row>
+ <row>
+ <entry><varname>degraded</varname></entry>
+ <entry><para>The system is operational but one or more
+ units failed.</para></entry>
+ </row>
+ <row>
+ <entry><varname>maintenance</varname></entry>
+ <entry><para>The rescue or emergency target is
+ active.</para></entry>
+ </row>
+ <row>
+ <entry><varname>stopping</varname></entry>
+ <entry><para>The manager is shutting
+ down.</para></entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>default</command></term>
<command>isolate default.target</command>.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>rescue</command></term>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reboot</command></term>
+ <term><command>reboot <optional><replaceable>arg</replaceable></optional></command></term>
<listitem>
<para>Shut down and reboot the system. This is mostly
specified twice, the operation is immediately executed
without terminating any processes or unmounting any file
systems. This may result in data loss.</para>
+
+ <para>If the optional argument
+ <replaceable>arg</replaceable> is given, it will be passed
+ as the optional argument to the
+ <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ system call. The value is architecture and firmware
+ specific. As an example, <literal>recovery</literal> might
+ be used to trigger system recovery, and
+ <literal>fota</literal> might be used to trigger a
+ <quote>firmware over the air</quote> update.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>kexec</command></term>
immediately followed by the reboot.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>exit</command></term>
with the <option>--user</option> option) and will fail
otherwise.</para>
</listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><command>switch-root <replaceable>ROOT</replaceable> <optional><replaceable>INIT</replaceable></optional></command></term>
+
+ <listitem>
+ <para>Switches to a different root directory and executes a
+ new system manager process below it. This is intended for
+ usage in initial RAM disks ("initrd"), and will transition
+ from the initrd's system manager process (a.k.a "init"
+ process) to the main system manager process. This call takes two
+ arguments: the directory that is to become the new root directory, and
+ the path to the new system manager binary below it to
+ execute as PID 1. If the latter is omitted or the empty
+ string, a systemd binary will automatically be searched for
+ and used as init. If the system manager path is omitted or
+ equal to the empty string, the state of the initrd's system
+ manager process is passed to the main system manager, which
+ allows later introspection of the state of the services
+ involved in the initrd boot.</para>
+ </listitem>
</varlistentry>
+
<varlistentry>
<term><command>suspend</command></term>
</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>hibernate</command></term>
</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>hybrid-sleep</command></term>
<filename>hybrid-sleep.target</filename> target.</para>
</listitem>
</varlistentry>
- <varlistentry>
- <term><command>switch-root <replaceable>ROOT</replaceable> [<replaceable>INIT</replaceable>]</command></term>
-
- <listitem>
- <para>Switches to a different root directory and executes a
- new system manager process below it. This is intended for
- usage in initial RAM disks ("initrd"), and will transition
- from the initrd's system manager process (a.k.a "init"
- process) to the main system manager process. This call takes two
- arguments: the directory that is to become the new root directory, and
- the path to the new system manager binary below it to
- execute as PID 1. If the latter is omitted or the empty
- string, a systemd binary will automatically be searched for
- and used as init. If the system manager path is omitted or
- equal to the empty string, the state of the initrd's system
- manager process is passed to the main system manager, which
- allows later introspection of the state of the services
- involved in the initrd boot.</para>
- </listitem>
- </varlistentry>
</variablelist>
</refsect2>
+ <refsect2>
+ <title>Parameter Syntax</title>
+
+ <para>Unit commands listed above take either a single unit name
+ (designated as <replaceable>NAME</replaceable>), or multiple
+ unit specifications (designated as
+ <replaceable>PATTERN</replaceable>...). In the first case, the
+ unit name with or without a suffix must be given. If the suffix
+ is not specified, systemctl will append a suitable suffix,
+ <literal>.service</literal> by default, and a type-specific
+ suffix in case of commands which operate only on specific unit
+ types. For example,
+ <programlisting># systemctl start sshd</programlisting> and
+ <programlisting># systemctl start sshd.service</programlisting>
+ are equivalent, as are
+ <programlisting># systemctl isolate default</programlisting>
+ and
+ <programlisting># systemctl isolate default.target</programlisting>
+ Note that (absolute) paths to device nodes are automatically
+ converted to device unit names, and other (absolute) paths to
+ mount unit names.
+ <programlisting># systemctl status /dev/sda
+# systemctl status /home</programlisting>
+ are equivalent to:
+ <programlisting># systemctl status dev-sda.device
+# systemctl status home.mount</programlisting>
+ In the second case, shell-style globs will be matched against
+ currently loaded units; literal unit names, with or without
+ a suffix, will be treated as in the first case. This means that
+ literal unit names always refer to exactly one unit, but globs
+ may match zero units and this is not considered an error.</para>
+
+ <para>Glob patterns use
+ <citerefentry project='man-pages'><refentrytitle>fnmatch</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ so normal shell-style globbing rules are used, and
+ <literal>*</literal>, <literal>?</literal>,
+ <literal>[]</literal> may be used. See
+ <citerefentry project='man-pages'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for more details. The patterns are matched against the names of
+ currently loaded units, and patterns which do not match anything
+ are silently skipped. For example:
+ <programlisting># systemctl stop sshd@*.service</programlisting>
+ will stop all <filename>sshd@.service</filename> instances.
+ </para>
+
+ <para>For unit file commands, the specified
+ <replaceable>NAME</replaceable> should be the full name of the
+ unit file, or the absolute path to the unit file:
+ <programlisting># systemctl enable foo.service</programlisting>
+ or
+ <programlisting># systemctl link /path/to/foo.service</programlisting>
+ </para>
+ </refsect2>
+
</refsect1>
<refsect1>
<variablelist class='environment-variables'>
<varlistentry>
- <term><varname>$SYSTEMD_PAGER</varname></term>
-
- <listitem>
- <para>Pager to use when <option>--no-pager</option> is not
- given; overrides <varname>$PAGER</varname>. Setting this to
- an empty string or the value <literal>cat</literal> is
- equivalent to passing
- <option>--no-pager</option>.</para>
- </listitem>
+ <term><varname>$SYSTEMD_EDITOR</varname></term>
+
+ <listitem><para>Editor to use when editing units; overrides
+ <varname>$EDITOR</varname> and <varname>$VISUAL</varname>. If neither
+ <varname>$SYSTEMD_EDITOR</varname> nor <varname>$EDITOR</varname> nor
+ <varname>$VISUAL</varname> are present or if it is set to an empty
+ string or if their execution failed, systemctl will try to execute well
+ known editors in this order:
+ <citerefentry><refentrytitle>nano</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>vim</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>vi</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+ </para></listitem>
</varlistentry>
</variablelist>
+ <xi:include href="less-variables.xml" xpointer="pager"/>
+ <xi:include href="less-variables.xml" xpointer="less"/>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemadm</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.resource-management</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry project='man-pages'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff