<term><option>--full</option></term>
<listitem>
- <para>Do not ellipsize unit names, process tree entries, and
- truncate unit descriptions in the output of
- <command>list-units</command> and
- <command>list-jobs</command>.</para>
+ <para>Do not ellipsize unit names, process tree entries,
+ journal output, or truncate unit descriptions in the output
+ of <command>status</command>, <command>list-units</command>,
+ <command>list-jobs</command>, and
+ <command>list-timers</command>.</para>
</listitem>
</varlistentry>
<term><option>--job-mode=</option></term>
<listitem>
- <para>When queuing a new job, control how to deal with already
- queued jobs. Takes one of <literal>fail</literal>,
+ <para>When queuing a new job, this option controls how to deal with
+ already queued jobs. It takes one of <literal>fail</literal>,
<literal>replace</literal>,
<literal>replace-irreversibly</literal>,
<literal>isolate</literal>,
applications.</para>
<para><literal>ignore-requirements</literal> is similar to
- <literal>ignore-dependencies</literal> but only causes the
+ <literal>ignore-dependencies</literal>, but only causes the
requirement dependencies to be ignored, the ordering
dependencies will still be honoured.</para>
</listitem>
sleep state. Any user may take these locks and privileged
users may override these locks. If any locks are taken,
shutdown and sleep state requests will normally fail
- (regardless if privileged or not) and a list of active locks
+ (regardless of whether privileged or not) and a list of active locks
is printed. However, if <option>--ignore-inhibitors</option>
is specified, the locks are ignored and not printed, and the
operation attempted anyway, possibly requiring additional
<term><option>--no-legend</option></term>
<listitem>
- <para>Do not print a legend, i.e. the column headers and
+ <para>Do not print the legend, i.e. the column headers and
the footer with hints.</para>
</listitem>
</varlistentry>
<listitem>
<para>When used with <command>enable</command>,
- <command>disable</command>, <command>is-enabled</command>
+ <command>disable</command>,
(and related commands), make changes only temporarily, so
that they are lost on the next reboot. This will have the
effect that changes are not made in subdirectories of
with identical immediate effects, however, since the latter
is lost on reboot, the changes are lost too.</para>
- <para>Similar, when used with
+ <para>Similarly, when used with
<command>set-property</command>, make changes only
temporarily, so that they are lost on the next
reboot.</para>
<term><command>list-sockets <optional><replaceable>PATTERN</replaceable>...</optional></command></term>
<listitem>
- <para>List socket units ordered by the listening address.
+ <para>List socket units ordered by listening address.
If one or more <replaceable>PATTERN</replaceable>s are
specified, only socket units matching one of them are
shown. Produces output similar to
</varlistentry>
<varlistentry>
- <term><command>start <replaceable>NAME</replaceable>...</command></term>
+ <term><command>start <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Start (activate) one or more units specified on the
command line.</para>
+
+ <para>Note that glob patterns operate on a list of currently
+ loaded units. Units which are not active and are not in a
+ failed state usually are not loaded, and would not be
+ matched by any pattern. In addition, in case of
+ instantiated units, systemd is often unaware of the
+ instance name until the instance has been started. Therefore
+ using glob patterns with <command>start</command>
+ has limited usefulness.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>stop <replaceable>NAME</replaceable>...</command></term>
+ <term><command>stop <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Stop (deactivate) one or more units specified on the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Asks all units listed on the command line to reload
</varlistentry>
<varlistentry>
- <term><command>restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Restart one or more units specified on the command
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
</listitem>
</varlistentry>
<varlistentry>
- <term><command>reload-or-try-restart <replaceable>NAME</replaceable>...</command></term>
+ <term><command>reload-or-try-restart <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Reload one or more units if they support it. If not,
</listitem>
</varlistentry>
<varlistentry>
- <term><command>kill <replaceable>NAME</replaceable>...</command></term>
+ <term><command>kill <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Send a signal to one or more processes of the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-active <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-active <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Check whether any of the specified units are active
(i.e. running). Returns an exit code 0 if at least one is
- active, non-zero otherwise. Unless <option>--quiet</option>
+ active, or non-zero otherwise. Unless <option>--quiet</option>
is specified, this will also print the current unit state to
STDOUT.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>is-failed <replaceable>NAME</replaceable>...</command></term>
+ <term><command>is-failed <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Check whether any of the specified units are in a "failed" state.
</listitem>
</varlistentry>
<varlistentry>
- <term><command>status</command> <optional><replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...]</optional></term>
+ <term><command>status</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...]</optional></term>
<listitem>
<para>Show terse runtime status information about one or
belongs to.</para>
<para>This function is intended to generate human-readable
- output. If you are looking for computer-parsable output, use
- <command>show</command> instead.</para>
+ output. If you are looking for computer-parsable output,
+ use <command>show</command> instead. By default this
+ function only shows 10 lines of output and ellipsizes
+ lines to fit in the terminal window. This can be changes
+ with <option>--lines</option> and <option>--full</option>,
+ see above. In addition, <command>journalctl
+ --unit=<replaceable>NAME</replaceable></command> or
+ <command>journalctl
+ --user-unit=<replaceable>NAME</replaceable></command> use
+ a similar filter for messages and might be more
+ convenient.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>show</command> <optional><replaceable>NAME</replaceable>...|<replaceable>JOB</replaceable>...</optional></term>
+ <term><command>show</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>JOB</replaceable>...</optional></term>
<listitem>
<para>Show properties of one or more units, jobs, or the
</listitem>
</varlistentry>
<varlistentry>
- <term><command>cat <replaceable>NAME</replaceable>...</command></term>
+ <term><command>cat <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Show backing files of one or more units. Prints the
</varlistentry>
<varlistentry>
- <term><command>help <replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...</command></term>
+ <term><command>help <replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...</command></term>
<listitem>
<para>Show manual pages for one or more units, if
</varlistentry>
<varlistentry>
- <term><command>reset-failed [<replaceable>NAME</replaceable>...]</command></term>
+ <term><command>reset-failed [<replaceable>PATTERN</replaceable>...]</command></term>
<listitem>
<para>Reset the <literal>failed</literal> state of the
<listitem>
<para>Checks whether any of the specified unit files are
- enabled (as with <command>enable</command>). Returns an exit
- code of 0 if at least one is enabled, non-zero
- otherwise. Prints the current enable status. To suppress
- this output, use <option>--quiet</option>.</para>
+ enabled (as with <command>enable</command>). Returns an
+ exit code of 0 if at least one is enabled, non-zero
+ otherwise. Prints the current enable status (see table).
+ To suppress this output, use <option>--quiet</option>.
+ </para>
+
+ <table>
+ <title>
+ <command>is-enabled</command> output
+ </title>
+
+ <tgroup cols='3'>
+ <thead>
+ <row>
+ <entry>Printed string</entry>
+ <entry>Meaning</entry>
+ <entry>Return value</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><literal>enabled</literal></entry>
+ <entry morerows='1'>Enabled through a symlink in <filename>.wants</filename> directory (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>0</entry>
+ </row>
+ <row>
+ <entry><literal>enabled-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>linked</literal></entry>
+ <entry morerows='1'>Made available through a symlink to the unit file (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>linked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>masked</literal></entry>
+ <entry morerows='1'>Disabled entirely (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>1</entry>
+ </row>
+ <row>
+ <entry><literal>masked-runtime</literal></entry>
+ </row>
+ <row>
+ <entry><literal>static</literal></entry>
+ <entry>Unit is not enabled, but has no provisions for enabling in [Install] section</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>disabled</literal></entry>
+ <entry>Unit is not enabled</entry>
+ <entry>1</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
</listitem>
</varlistentry>
</listitem>
</varlistentry>
<varlistentry>
- <term><command>delete <replaceable>NAME</replaceable>...</command></term>
+ <term><command>delete <replaceable>PATTERN</replaceable>...</command></term>
<listitem>
<para>Remove a snapshot previously created with
<refsect2>
<title>Parameter Syntax</title>
- <para>For unit commands the specified
- <replaceable>NAME</replaceable> should be the full name of the
- unit, or an abbreviated name which is automatically extended with
- the <literal>.service</literal> suffix.
- <programlisting># systemctl start foo.service</programlisting> is equivalent to:
- <programlisting># systemctl start foo</programlisting>
- Note that (absolute) paths to device nodes are automatically converted to device unit names, and other (absolute) paths to mount unit names.
- <programlisting># systemctl status /dev/sda
-# systemctl status /home</programlisting> is equivalent to:
- <programlisting># systemctl status dev-sda.device
-# systemctl status home.mount</programlisting></para>
-
- <para>For unit file commands the
- specified <replaceable>NAME</replaceable> should be the full name
- of the unit file, or the absolute path to the unit file.
- <programlisting># systemctl link /path/to/foo.service</programlisting>
- </para>
+ <para>Unit ommands listed above take either a single unit name
+ (designated as <replaceable>NAME</replaceable>), or multiple
+ unit specifications (designated as
+ <replaceable>PATTERN</replaceable>...). In the first case, the
+ unit name with or without a suffix must be given. If the suffix
+ is not specified, systemctl will append a suitable suffix,
+ <literal>.service</literal> by default, and a type-specific
+ suffix in case of commands which operate only on specific unit
+ types. For example,
+ <programlisting># systemctl start sshd</programlisting> and
+ <programlisting># systemctl start sshd.service</programlisting>
+ are equivalent, as are
+ <programlisting># systemctl isolate snapshot-11</programlisting>
+ and
+ <programlisting># systemctl isolate snapshot-11.snapshot</programlisting>
+ Note that (absolute) paths to device nodes are automatically
+ converted to device unit names, and other (absolute) paths to
+ mount unit names.
+ <programlisting># systemctl status /dev/sda
+# systemctl status /home</programlisting>
+ are equivalent to:
+ <programlisting># systemctl status dev-sda.device
+# systemctl status home.mount</programlisting>
+ In the second case, shell-style globs will be matched against
+ currently loaded units, and literal unit names, with or without
+ a suffix, will be treated as in the first case. This means that
+ literal unit names always refer to exactly one unit, but globs
+ may match zero units and this is not considered an error.</para>
+
+ <para>Glob patterns use
+ <citerefentry><refentrytitle>fnmatch</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ so normal shell-style globbing rules are used, and
+ <literal>*</literal>, <literal>?</literal>,
+ <literal>[]</literal> may be used. See
+ <citerefentry><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ for more details. The patterns are matched against the names of
+ currently loaded units, and patterns which don't match anything
+ are silently skipped. For example:
+ <programlisting># systemctl stop sshd@*.service</programlisting>
+ will stop all <filename>sshd@.service</filename> instances.
+ </para>
+
+ <para>For unit file commands, the specified
+ <replaceable>NAME</replaceable> should be the full name of the
+ unit file, or the absolute path to the unit file:
+ <programlisting># systemctl enable foo.service</programlisting>
+ or
+ <programlisting># systemctl link /path/to/foo.service</programlisting>
+ </para>
</refsect2>
</refsect1>
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
</refsect1>
~ianmdlvl / elogind.git / blobdiff