-<?xml version='1.0'?> <!--*-nxml-*-->
+<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<refsect1>
<title>Description</title>
- <para><command>systemctl</command> may be used to
- introspect and control the state of the
+ <para><command>systemctl</command> may be used to introspect and
+ control the state of the <literal>systemd</literal> system and
+ service manager. Please refer to
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- system and service manager.</para>
+ for an introduction into the basic concepts and functionality this
+ tool manages.</para>
</refsect1>
<refsect1>
<term><option>--state=</option></term>
<listitem>
- <para>The argument should be a comma-separated list of unit LOAD,
- SUB, or ACTIVE states. When listing units, show only those
- in specified states.</para>
+ <para>The argument should be a comma-separated list of unit
+ LOAD, SUB, or ACTIVE states. When listing units, show only
+ those in specified states. Use <option>--state=failed</option>
+ to show only failed units.</para>
</listitem>
</varlistentry>
<command>snapshot</command>,
<command>is-active</command>,
<command>is-failed</command>,
+ <command>is-enabled</command>,
+ <command>is-system-running</command>,
<command>enable</command> and
<command>disable</command>.</para>
</listitem>
<xi:include href="user-system-options.xml" xpointer="user" />
<xi:include href="user-system-options.xml" xpointer="system" />
+ <!-- we do not document -failed here, as it has been made
+ redundant by -state=failed, which it predates. To keep
+ things simple we only document the new switch, while
+ keeping the old one around for compatibility only. -->
+
<varlistentry>
<term><option>--no-wall</option></term>
<listitem>
<para>Takes one of <literal>full</literal> (the default),
<literal>enable-only</literal>,
- <literal>disable-only</literal>. When use with the
+ <literal>disable-only</literal>. When used with the
<command>preset</command> or <command>preset-all</command>
- commands controls whether units shall be disabled and
+ commands, controls whether units shall be disabled and
enabled according to the preset rules, or only enabled, or
only disabled.</para>
</listitem>
</para>
<para>See also the options <option>--show-types</option>,
- <option>--all</option>, and <option>--failed</option>.</para>
+ <option>--all</option>, and <option>--state=</option>.</para>
</listitem>
</varlistentry>
</para>
<para>See also the options <option>--all</option> and
- <option>--failed</option>.</para>
+ <option>--state=</option>.</para>
</listitem>
</varlistentry>
file.</para>
<para>This command should not be confused with the
- <command>daemon-reload</command> or <command>load</command>
- commands.</para>
+ <command>daemon-reload</command> command.</para>
</listitem>
</varlistentry>
the system, or for all future logins of all users, or only this
boot. Note that in the last case, no systemd daemon
configuration is reloaded.</para>
+
+ <para>Using <command>enable</command> on masked units
+ results in an error.</para>
</listitem>
</varlistentry>
<tbody>
<row>
<entry><literal>enabled</literal></entry>
- <entry morerows='1'>Enabled through a symlink in <filename>.wants</filename> directory (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>Enabled through a symlink in <filename>.wants</filename> directory (permanently or just in <filename>/run</filename>).</entry>
<entry morerows='1'>0</entry>
</row>
<row>
</row>
<row>
<entry><literal>linked</literal></entry>
- <entry morerows='1'>Made available through a symlink to the unit file (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>Made available through a symlink to the unit file (permanently or just in <filename>/run</filename>).</entry>
<entry morerows='1'>1</entry>
</row>
<row>
</row>
<row>
<entry><literal>masked</literal></entry>
- <entry morerows='1'>Disabled entirely (permanently or just in <filename>/run</filename>)</entry>
+ <entry morerows='1'>Disabled entirely (permanently or just in <filename>/run</filename>).</entry>
<entry morerows='1'>1</entry>
</row>
<row>
</row>
<row>
<entry><literal>static</literal></entry>
- <entry>Unit is not enabled, but has no provisions for enabling in [Install] section</entry>
+ <entry>Unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> section.</entry>
+ <entry>0</entry>
+ </row>
+ <row>
+ <entry><literal>indirect</literal></entry>
+ <entry>Unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> section, listing other unit files that might be enabled.</entry>
<entry>0</entry>
</row>
<row>
<entry><literal>disabled</literal></entry>
- <entry>Unit is not enabled</entry>
+ <entry>Unit file is not enabled.</entry>
<entry>1</entry>
</row>
</tbody>
<filename>/dev/null</filename>, making it impossible to
start them. This is a stronger version of
<command>disable</command>, since it prohibits all kinds of
- activation of the unit, including manual activation. Use
- this option with care. This honors the
+ activation of the unit, including enablement and manual
+ activation. Use this option with care. This honors the
<option>--runtime</option> option to only mask temporarily
until the next reboot of the system.</para>
</listitem>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><command>add-wants <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+ <term><command>add-requires <replaceable>TARGET</replaceable>
+ <replaceable>NAME</replaceable>...</command></term>
+
+ <listitem>
+ <para>Adds <literal>Wants=</literal> resp. <literal>Requires=</literal>
+ dependency to the specified <replaceable>TARGET</replaceable> for
+ one or more units. </para>
+
+ <para>This command honors <option>--system</option>,
+ <option>--user</option>, <option>--runtime</option> and
+ <option>--global</option> in a similar way as
+ <command>enable</command>.</para>
+
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>link <replaceable>FILENAME</replaceable>...</command></term>
<para>Reload systemd manager configuration. This will reload
all unit files and recreate the entire dependency
tree. While the daemon is being reloaded, all sockets systemd
- listens on on behalf of user configuration will stay
+ listens on behalf of user configuration will stay
accessible.</para> <para>This command should not be confused
- with the <command>load</command> or
- <command>reload</command> commands.</para>
+ with the <command>reload</command> command.</para>
</listitem>
</varlistentry>
<varlistentry>
<title>System Commands</title>
<variablelist>
+ <varlistentry>
+ <term><command>is-system-running</command></term>
+
+ <listitem>
+ <para>Checks whether the system is operational. This
+ returns success when the system is fully up and running,
+ meaning not in startup, shutdown or maintenance
+ mode. Failure is returned otherwise. In addition, the
+ current state is printed in a short string to standard
+ output, see table below. Use <option>--quiet</option> to
+ suppress this output.</para>
+
+ <table>
+ <title>Manager Operational States</title>
+ <tgroup cols='2'>
+ <colspec colname='name' />
+ <colspec colname='description' />
+ <thead>
+ <row>
+ <entry>Name</entry>
+ <entry>Description</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry><varname>initializing</varname></entry>
+ <entry><para>Early bootup, before
+ <filename>basic.target</filename> is reached
+ or the <varname>maintenance</varname> state entered.
+ </para></entry>
+ </row>
+ <row>
+ <entry><varname>starting</varname></entry>
+ <entry><para>Late bootup, before the job queue
+ becomes idle for the first time, or one of the
+ rescue targets are reached.</para></entry>
+ </row>
+ <row>
+ <entry><varname>running</varname></entry>
+ <entry><para>The system is fully
+ operational.</para></entry>
+ </row>
+ <row>
+ <entry><varname>degraded</varname></entry>
+ <entry><para>The system is operational but one or more
+ units failed.</para></entry>
+ </row>
+ <row>
+ <entry><varname>maintenance</varname></entry>
+ <entry><para>The rescue or emergency target is
+ active.</para></entry>
+ </row>
+ <row>
+ <entry><varname>stopping</varname></entry>
+ <entry><para>The manager is shutting
+ down.</para></entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+ </listitem>
+ </varlistentry>
+
<varlistentry>
<term><command>default</command></term>
<command>isolate default.target</command>.</para>
</listitem>
</varlistentry>
+
<varlistentry>
<term><command>rescue</command></term>
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.resource-management</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>
<citerefentry><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
~ianmdlvl / elogind.git / blobdiff