<?xml version='1.0'?> <!--*-nxml-*-->
-<?xml-stylesheet type="text/xsl" href="http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl"?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
This file is part of systemd.
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
-<refentry id="journald.conf">
- <refentryinfo>
- <title>journald.conf</title>
- <productname>systemd</productname>
-
- <authorgroup>
- <author>
- <contrib>Developer</contrib>
- <firstname>Lennart</firstname>
- <surname>Poettering</surname>
- <email>lennart@poettering.net</email>
- </author>
- </authorgroup>
- </refentryinfo>
-
- <refmeta>
- <refentrytitle>journald.conf</refentrytitle>
- <manvolnum>5</manvolnum>
- </refmeta>
-
- <refnamediv>
- <refname>journald.conf</refname>
- <refpurpose>Journal service configuration file</refpurpose>
- </refnamediv>
-
- <refsynopsisdiv>
- <para><filename>/etc/systemd/journald.conf</filename></para>
- </refsynopsisdiv>
-
- <refsect1>
- <title>Description</title>
-
- <para>This files configures various parameters of the
- systemd journal service
- <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
-
- </refsect1>
-
- <refsect1>
- <title>Options</title>
-
- <para>All options are configured in the
- <literal>[Journal]</literal> section:</para>
-
- <variablelist>
-
- <varlistentry>
- <term><varname>Compress=</varname></term>
-
- <listitem><para>Takes a boolean
- value. If enabled (the default) data
- objects that shall be stored in the
- journal and are larger than a certain
- threshold are compressed with the XZ
- compression algorithm before they are
- written to the file
- system.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>RateLimitInterval=</varname></term>
- <term><varname>RateLimitBurst=</varname></term>
-
- <listitem><para>Configures the rate
- limiting that is applied to all
- messages generated on the system. If
- in the time interval defined by
- <varname>RateLimitInterval=</varname>
- more messages than specified in
- <varname>RateLimitBurst=</varname> are
- logged by a service all further
- messages within the interval are
- dropped, until the interval is over. A
- message about the number of dropped
- messages is generated. This rate
- limiting is applied per-service, so
- that two services which log do not
- interfere with each other's
- limit. Defaults to 100 messages in
- 10s. The time specification for
- <varname>RateLimitInterval=</varname>
- may be specified in the following
- units: <literal>s</literal>,
- <literal>min</literal>,
- <literal>h</literal>,
- <literal>ms</literal>,
- <literal>us</literal>. To turn off any
- kind of rate limiting, set either
- value to 0.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>SystemMaxUse=</varname></term>
- <term><varname>SystemKeepFree=</varname></term>
- <term><varname>SystemMaxFileSize=</varname></term>
- <term><varname>SystemMinFileSize=</varname></term>
- <term><varname>RuntimeMaxUse=</varname></term>
- <term><varname>RuntimeKeepFree=</varname></term>
- <term><varname>RuntimeMaxFileSize=</varname></term>
- <term><varname>RuntimeMinFileSize=</varname></term>
-
- <listitem><para>Enforce size limits on
- the journal files stored. The options
- prefixed with
- <literal>System</literal> apply to the
- journal files when stored on a
- persistent file system, more
- specifically
- <filename>/var/log/journal</filename>. The
- options prefixed with
- <literal>Runtime</literal> apply to
- the journal files when stored on a
- volatile in-memory file system, more
- specifically
- <filename>/run/log/journal</filename>. The
- former is used only when
- <filename>/var</filename> is mounted,
- writable and the directory
- <filename>/var/log/journal</filename>
- exists. Otherwise only the latter
- applies. Note that this means that
- during early boot and if the
- administrator disabled persistent
- logging only the latter options apply,
- while the former apply if persistent
- logging is enabled and the system is
- fully booted
- up. <varname>SystemMaxUse=</varname>
- and <varname>RuntimeMaxUse=</varname>
- control how much disk space the
- journal may use up at
- maximum. Defaults to 10% of the size
- of the respective file
- system. <varname>SystemKeepFree=</varname>
- and
- <varname>RuntimeKeepFree=</varname>
- control how much disk space the
- journal shall always leave free for
- other uses if less than the disk space
- configured in
- <varname>SystemMaxUse=</varname> and
- <varname>RuntimeMaxUse=</varname> is
- available. Defaults to 5% of the size
- of the respective file
- system. <varname>SystemMaxFileSize=</varname>
- and
- <varname>RuntimeMaxFileSize=</varname>
- control how large individual journal
- files may grow at maximum. This
- influences the granularity in which
- disk space is made available through
- rotation, i.e. deletion of historic
- data. Defaults to one eighth of the
- values configured with
- <varname>SystemMaxUse=</varname> and
- <varname>RuntimeMaxUse=</varname>, so
- that usually seven rotated journal
- files are kept as
- history. <varname>SystemMinFileSize=</varname>
- and
- <varname>RuntimeMinFileSize=</varname>
- control how large individual journal
- files grow at minimum. Defaults to
- 64K. Specify values in bytes or use
- K, M, G, T, P, E as units for the
- specified sizes. Note that size limits
- are enforced synchronously to journal
- files as they are extended, and need
- no explicit rotation step triggered by
- time.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>ForwardToSyslog=</varname></term>
- <term><varname>ForwardToKMsg=</varname></term>
- <term><varname>ForwardToConsole=</varname></term>
-
- <listitem><para>Control whether log
- messages received by the journal
- daemon shall be forwarded to a
- traditional syslog daemon, to the
- kernel log buffer (kmsg), or to the
- system console. These options take
- boolean arguments. If forwarding to
- syslog is enabled but no syslog daemon
- is running the respective option has
- no effect. By default only forwarding
- to syslog is enabled. These settings
- may be overridden at boot time with the
- kernel command line options
- <literal>systemd.journald.forward_to_syslog=</literal>,
- <literal>systemd.journald.forward_to_kmsg=</literal>
- and
- <literal>systemd.journald.forward_to_console=</literal>. If
- forwarding to the kernel log buffer and
- <varname>ImportKernel=</varname> is
- enabled at the same time care is taken
- to avoid logging loops. It is safe to
- use these options in combination.
- </para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>MaxLevelStore=</varname></term>
- <term><varname>MaxLevelSyslog=</varname></term>
- <term><varname>MaxLevelKMsg=</varname></term>
- <term><varname>MaxLevelConsole=</varname></term>
-
- <listitem><para>Controls the maximum
- log level of messages that are stored
- on disk, forwarded to syslog, kmsg or
- the console (if that is enabled, see
- above). As argument, takes one of
- <literal>emerg</literal>,
- <literal>alert</literal>,
- <literal>crit</literal>,
- <literal>err</literal>,
- <literal>warning</literal>,
- <literal>notice</literal>,
- <literal>info</literal>,
- <literal>debug</literal> or integer
- values in the range of 0..7 (corresponding
- to the same levels). Messages equal or below
- the log level specified are
- stored/forwarded, messages above are
- dropped. Defaults to
- <literal>debug</literal> for
- <varname>MaxLevelStore=</varname> and
- <varname>MaxLevelSyslog=</varname>, to
- ensure that the all messages are
- written to disk and forwarded to
- syslog. Defaults to
- <literal>notice</literal> for
- <varname>MaxLevelKMsg=</varname> and
- <literal>info</literal> for
- <varname>MaxLevelConsole=</varname>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>TTYPath=</varname></term>
-
- <listitem><para>Change the console TTY
- to use if
- <varname>ForwardToConsole=yes</varname>
- is used. Defaults to
- <filename>/dev/console</filename>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>ImportKernel=</varname></term>
-
- <listitem><para>Controls whether
- kernel log messages shall be stored in
- the journal. Takes a boolean argument
- and defaults to disabled. Note that
- currently only one userspace service
- can read kernel messages at a time,
- which means that kernel log message
- reading might get corrupted if it
- is enabled in more than one service,
- for example in both the journal and a
- traditional syslog service.
- </para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>Storage=</varname></term>
-
- <listitem><para>Controls where to
- store journal data. One of
- <literal>volatile</literal>,
- <literal>persistent</literal>,
- <literal>auto</literal> and
- <literal>none</literal>. If
- <literal>volatile</literal> journal
- log data will be stored only in
- memory, i.e. below the
- <filename>/run/log/journal</filename>
- hierarchy (which is created if
- needed). If
- <literal>persistent</literal> data will
- be stored preferably on disk,
- i.e. below the
- <filename>/var/log/journal</filename>
- hierarchy (which is created if
- needed), with a fallback to
- <filename>/run/log/journal</filename>
- (which is created if needed), during
- early boot and if the disk is not
- writable. <literal>auto</literal> is
- similar to
- <literal>persistent</literal> but the
- directory
- <filename>/var/log/journal</filename>
- is not created if needed, so that its
- existence controls where log data
- goes. <literal>none</literal> turns
- off all storage, all log data received
- will be dropped. Forwarding to other
- targets, such as the console, the
- kernel log buffer or a syslog daemon
- will still work however. Defaults to
- <literal>auto</literal>.</para></listitem>
- </varlistentry>
- </variablelist>
-
- </refsect1>
-
- <refsect1>
- <title>See Also</title>
- <para>
- <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
- </para>
- </refsect1>
+<refentry id="journald.conf"
+ xmlns:xi="http://www.w3.org/2001/XInclude">
+ <refentryinfo>
+ <title>journald.conf</title>
+ <productname>systemd</productname>
+
+ <authorgroup>
+ <author>
+ <contrib>Developer</contrib>
+ <firstname>Lennart</firstname>
+ <surname>Poettering</surname>
+ <email>lennart@poettering.net</email>
+ </author>
+ </authorgroup>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>journald.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>journald.conf</refname>
+ <refname>journald.conf.d</refname>
+ <refpurpose>Journal service configuration files</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <para><filename>/etc/systemd/journald.conf</filename></para>
+ <para><filename>/etc/systemd/journald.conf.d/*.conf</filename></para>
+ <para><filename>/run/systemd/journald.conf.d/*.conf</filename></para>
+ <para><filename>/usr/lib/systemd/journald.conf.d/*.conf</filename></para>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>These files configure various parameters of the systemd
+ journal service,
+ <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
+
+ </refsect1>
+
+ <xi:include href="standard-conf.xml" xpointer="confd" />
+ <xi:include href="standard-conf.xml" xpointer="conf" />
+
+ <refsect1>
+ <title>Options</title>
+
+ <para>All options are configured in the
+ <literal>[Journal]</literal> section:</para>
+
+ <variablelist>
+
+ <varlistentry>
+ <term><varname>Storage=</varname></term>
+
+ <listitem><para>Controls where to store journal data. One of
+ <literal>volatile</literal>,
+ <literal>persistent</literal>,
+ <literal>auto</literal> and
+ <literal>none</literal>. If
+ <literal>volatile</literal>, journal
+ log data will be stored only in memory, i.e. below the
+ <filename>/run/log/journal</filename> hierarchy (which is
+ created if needed). If <literal>persistent</literal>, data
+ will be stored preferably on disk, i.e. below the
+ <filename>/var/log/journal</filename> hierarchy (which is
+ created if needed), with a fallback to
+ <filename>/run/log/journal</filename> (which is created if
+ needed), during early boot and if the disk is not writable.
+ <literal>auto</literal> is similar to
+ <literal>persistent</literal> but the directory
+ <filename>/var/log/journal</filename> is not created if
+ needed, so that its existence controls where log data goes.
+ <literal>none</literal> turns off all storage, all log data
+ received will be dropped. Forwarding to other targets, such as
+ the console, the kernel log buffer or a syslog daemon will
+ still work however. Defaults to
+ <literal>auto</literal>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Compress=</varname></term>
+
+ <listitem><para>Takes a boolean value. If enabled (the
+ default), data objects that shall be stored in the journal and
+ are larger than a certain threshold are compressed before they
+ are written to the file system.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>Seal=</varname></term>
+
+ <listitem><para>Takes a boolean value. If enabled (the
+ default), and a sealing key is available (as created by
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
+ <option>--setup-keys</option> command), Forward Secure Sealing
+ (FSS) for all persistent journal files is enabled. FSS is
+ based on <ulink
+ url="https://eprint.iacr.org/2013/397">Seekable Sequential Key
+ Generators</ulink> by G. A. Marson and B. Poettering
+ (doi:10.1007/978-3-642-40203-6_7) and may be used to protect
+ journal files from unnoticed alteration.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SplitMode=</varname></term>
+
+ <listitem><para>Controls whether to split up journal files per
+ user. One of <literal>uid</literal>, <literal>login</literal>
+ and <literal>none</literal>. If <literal>uid</literal>, all
+ users will get each their own journal files regardless of
+ whether they possess a login session or not, however system
+ users will log into the system journal. If
+ <literal>login</literal>, actually logged-in users will get
+ each their own journal files, but users without login session
+ and system users will log into the system journal. If
+ <literal>none</literal>, journal files are not split up by
+ user and all messages are instead stored in the single system
+ journal. Note that splitting up journal files by user is only
+ available for journals stored persistently. If journals are
+ stored on volatile storage (see above), only a single journal
+ file for all user IDs is kept. Defaults to
+ <literal>uid</literal>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>RateLimitInterval=</varname></term>
+ <term><varname>RateLimitBurst=</varname></term>
+
+ <listitem><para>Configures the rate limiting that is applied
+ to all messages generated on the system. If, in the time
+ interval defined by <varname>RateLimitInterval=</varname>,
+ more messages than specified in
+ <varname>RateLimitBurst=</varname> are logged by a service,
+ all further messages within the interval are dropped until the
+ interval is over. A message about the number of dropped
+ messages is generated. This rate limiting is applied
+ per-service, so that two services which log do not interfere
+ with each other's limits. Defaults to 1000 messages in 30s.
+ The time specification for
+ <varname>RateLimitInterval=</varname> may be specified in the
+ following units: <literal>s</literal>, <literal>min</literal>,
+ <literal>h</literal>, <literal>ms</literal>,
+ <literal>us</literal>. To turn off any kind of rate limiting,
+ set either value to 0.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SystemMaxUse=</varname></term>
+ <term><varname>SystemKeepFree=</varname></term>
+ <term><varname>SystemMaxFileSize=</varname></term>
+ <term><varname>RuntimeMaxUse=</varname></term>
+ <term><varname>RuntimeKeepFree=</varname></term>
+ <term><varname>RuntimeMaxFileSize=</varname></term>
+
+ <listitem><para>Enforce size limits on the journal files
+ stored. The options prefixed with <literal>System</literal>
+ apply to the journal files when stored on a persistent file
+ system, more specifically
+ <filename>/var/log/journal</filename>. The options prefixed
+ with <literal>Runtime</literal> apply to the journal files
+ when stored on a volatile in-memory file system, more
+ specifically <filename>/run/log/journal</filename>. The former
+ is used only when <filename>/var</filename> is mounted,
+ writable, and the directory
+ <filename>/var/log/journal</filename> exists. Otherwise, only
+ the latter applies. Note that this means that during early
+ boot and if the administrator disabled persistent logging,
+ only the latter options apply, while the former apply if
+ persistent logging is enabled and the system is fully booted
+ up. <command>journalctl</command> and
+ <command>systemd-journald</command> ignore all files with
+ names not ending with <literal>.journal</literal> or
+ <literal>.journal~</literal>, so only such files, located in
+ the appropriate directories, are taken into account when
+ calculating current disk usage.
+ </para>
+
+ <para><varname>SystemMaxUse=</varname> and
+ <varname>RuntimeMaxUse=</varname> control how much disk space
+ the journal may use up at maximum.
+ <varname>SystemKeepFree=</varname> and
+ <varname>RuntimeKeepFree=</varname> control how much disk
+ space systemd-journald shall leave free for other uses.
+ <command>systemd-journald</command> will respect both limits
+ and use the smaller of the two values.</para>
+
+ <para>The first pair defaults to 10% and the second to 15% of
+ the size of the respective file system. If the file system is
+ nearly full and either <varname>SystemKeepFree=</varname> or
+ <varname>RuntimeKeepFree=</varname> is violated when
+ systemd-journald is started, the value will be raised to
+ percentage that is actually free. This means that if there was
+ enough free space before and journal files were created, and
+ subsequently something else causes the file system to fill up,
+ journald will stop using more space, but it will not be
+ removing existing files to go reduce footprint either.</para>
+
+ <para><varname>SystemMaxFileSize=</varname>
+ and
+ <varname>RuntimeMaxFileSize=</varname>
+ control how large individual journal
+ files may grow at maximum. This
+ influences the granularity in which
+ disk space is made available through
+ rotation, i.e. deletion of historic
+ data. Defaults to one eighth of the
+ values configured with
+ <varname>SystemMaxUse=</varname> and
+ <varname>RuntimeMaxUse=</varname>, so
+ that usually seven rotated journal
+ files are kept as history. Specify
+ values in bytes or use K, M, G, T, P,
+ E as units for the specified sizes
+ (equal to 1024, 1024²,... bytes).
+ Note that size limits are enforced
+ synchronously when journal files are
+ extended, and no explicit rotation
+ step triggered by time is
+ needed.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>MaxFileSec=</varname></term>
+
+ <listitem><para>The maximum time to store entries in a single
+ journal file before rotating to the next one. Normally,
+ time-based rotation should not be required as size-based
+ rotation with options such as
+ <varname>SystemMaxFileSize=</varname> should be sufficient to
+ ensure that journal files do not grow without bounds. However,
+ to ensure that not too much data is lost at once when old
+ journal files are deleted, it might make sense to change this
+ value from the default of one month. Set to 0 to turn off this
+ feature. This setting takes time values which may be suffixed
+ with the units <literal>year</literal>,
+ <literal>month</literal>, <literal>week</literal>,
+ <literal>day</literal>, <literal>h</literal> or
+ <literal>m</literal> to override the default time unit of
+ seconds.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>MaxRetentionSec=</varname></term>
+
+ <listitem><para>The maximum time to store journal entries.
+ This controls whether journal files containing entries older
+ then the specified time span are deleted. Normally, time-based
+ deletion of old journal files should not be required as
+ size-based deletion with options such as
+ <varname>SystemMaxUse=</varname> should be sufficient to
+ ensure that journal files do not grow without bounds. However,
+ to enforce data retention policies, it might make sense to
+ change this value from the default of 0 (which turns off this
+ feature). This setting also takes time values which may be
+ suffixed with the units <literal>year</literal>,
+ <literal>month</literal>, <literal>week</literal>,
+ <literal>day</literal>, <literal>h</literal> or <literal>
+ m</literal> to override the default time unit of
+ seconds.</para></listitem>
+ </varlistentry>
+
+
+ <varlistentry>
+ <term><varname>SyncIntervalSec=</varname></term>
+
+ <listitem><para>The timeout before synchronizing journal files
+ to disk. After syncing, journal files are placed in the
+ OFFLINE state. Note that syncing is unconditionally done
+ immediately after a log message of priority CRIT, ALERT or
+ EMERG has been logged. This setting hence applies only to
+ messages of the levels ERR, WARNING, NOTICE, INFO, DEBUG. The
+ default timeout is 5 minutes. </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>ForwardToSyslog=</varname></term>
+ <term><varname>ForwardToKMsg=</varname></term>
+ <term><varname>ForwardToConsole=</varname></term>
+ <term><varname>ForwardToWall=</varname></term>
+
+ <listitem><para>Control whether log messages received by the
+ journal daemon shall be forwarded to a traditional syslog
+ daemon, to the kernel log buffer (kmsg), to the system
+ console, or sent as wall messages to all logged-in users.
+ These options take boolean arguments. If forwarding to syslog
+ is enabled but no syslog daemon is running, the respective
+ option has no effect. By default, only forwarding wall is
+ enabled. These settings may be overridden at boot time with
+ the kernel command line options
+ <literal>systemd.journald.forward_to_syslog=</literal>,
+ <literal>systemd.journald.forward_to_kmsg=</literal>,
+ <literal>systemd.journald.forward_to_console=</literal> and
+ <literal>systemd.journald.forward_to_wall=</literal>. When
+ forwarding to the console, the TTY to log to can be changed
+ with <varname>TTYPath=</varname>, described
+ below.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>MaxLevelStore=</varname></term>
+ <term><varname>MaxLevelSyslog=</varname></term>
+ <term><varname>MaxLevelKMsg=</varname></term>
+ <term><varname>MaxLevelConsole=</varname></term>
+ <term><varname>MaxLevelWall=</varname></term>
+
+ <listitem><para>Controls the maximum log level of messages
+ that are stored on disk, forwarded to syslog, kmsg, the
+ console or wall (if that is enabled, see above). As argument,
+ takes one of
+ <literal>emerg</literal>,
+ <literal>alert</literal>,
+ <literal>crit</literal>,
+ <literal>err</literal>,
+ <literal>warning</literal>,
+ <literal>notice</literal>,
+ <literal>info</literal>,
+ <literal>debug</literal>,
+ or integer values in the range of 0..7 (corresponding to the
+ same levels). Messages equal or below the log level specified
+ are stored/forwarded, messages above are dropped. Defaults to
+ <literal>debug</literal> for <varname>MaxLevelStore=</varname>
+ and <varname>MaxLevelSyslog=</varname>, to ensure that the all
+ messages are written to disk and forwarded to syslog. Defaults
+ to
+ <literal>notice</literal> for <varname>MaxLevelKMsg=</varname>,
+ <literal>info</literal> for <varname>MaxLevelConsole=</varname>,
+ and <literal>emerg</literal> for
+ <varname>MaxLevelWall=</varname>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>TTYPath=</varname></term>
+
+ <listitem><para>Change the console TTY to use if
+ <varname>ForwardToConsole=yes</varname> is used. Defaults to
+ <filename>/dev/console</filename>.</para></listitem>
+ </varlistentry>
+
+ </variablelist>
+
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ </para>
+ </refsect1>
</refentry>
~ianmdlvl / elogind.git / blobdiff