<refsynopsisdiv>
<cmdsynopsis>
- <command>journalctl <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt" rep="repeat">MATCHES</arg></command>
+ <command>journalctl</command>
+ <arg choice="opt" rep="repeat">OPTIONS</arg>
+ <arg choice="opt" rep="repeat">MATCHES</arg>
</cmdsynopsis>
</refsynopsisdiv>
journal as written by
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
- <para>If called without parameter will show the full
+ <para>If called without parameter it will show the full
contents of the journal, starting with the oldest
entry collected.</para>
command line all matches before and after are combined
in a disjunction (i.e. logical OR).</para>
+ <para>As shortcuts for a few types of field/value
+ matches file paths may be specified. If a file path
+ refers to an executable file, this is equivalent to an
+ <literal>_EXE=</literal> match for the canonicalized
+ binary path. Similar, if a path refers to a device
+ node, this is equivalent to a
+ <literal>_KERNEL_DEVICE=</literal> match for the
+ device.</para>
+
<para>Output is interleaved from all accessible
journal files, whether they are rotated or currently
being written, and regardless whether they belong to the
<variablelist>
<varlistentry>
- <term><option>--help</option></term>
<term><option>-h</option></term>
+ <term><option>--help</option></term>
<listitem><para>Prints a short help
text and exits.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--all</option></term>
+ <term><option>--full</option></term>
+
+ <listitem><para>Show all (printable) fields in
+ full.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><option>-a</option></term>
+ <term><option>--all</option></term>
<listitem><para>Show all fields in
full, even if they include unprintable
</varlistentry>
<varlistentry>
- <term><option>--follow</option></term>
<term><option>-f</option></term>
+ <term><option>--follow</option></term>
- <listitem><para>Show only most recent
+ <listitem><para>Show only the most recent
journal entries, and continuously print
new entries as they are appended to
the journal.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--lines=</option></term>
+ <term><option>-e</option></term>
+ <term><option>--pager-end</option></term>
+
+ <listitem><para>Immediately jump to
+ the end of the journal inside the
+ implied pager tool. This implies
+ <option>-n1000</option> to guarantee
+ that the pager won't buffer logs of
+ unbounded size. This may be overridden
+ with an explicit <option>-n</option>
+ with some other numeric value on the
+ command line. Note that this option is
+ only supported for the
+ <citerefentry><refentrytitle>less</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ pager.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><option>-n</option></term>
+ <term><option>--lines=</option></term>
- <listitem><para>Controls the number of
- journal lines to show, counting from
- the most recent ones. Takes a positive
- integer argument. In follow mode
- defaults to 10, otherwise is unset
- thus not limiting how many lines are
- shown.</para></listitem>
+ <listitem><para>Show the most recent
+ journal events and limit the number of
+ events shown. If
+ <option>--follow</option> is used,
+ this option is implied. The argument,
+ a positive integer, is optional, and
+ defaults to 10. </para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
- <term><option>--output=</option></term>
+ <term><option>-r</option></term>
+ <term><option>--reverse</option></term>
+
+ <listitem><para>Reverse output, so the newest
+ entries are displayed first.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><option>-o</option></term>
+ <term><option>--output=</option></term>
<listitem><para>Controls the
- formatting of the journal entries that are
- shown. Takes one of
+ formatting of the journal entries that
+ are shown. Takes one of
<literal>short</literal>,
<literal>short-monotonic</literal>,
<literal>verbose</literal>,
<literal>export</literal>,
<literal>json</literal>,
+ <literal>json-pretty</literal>,
+ <literal>json-sse</literal>,
<literal>cat</literal>. <literal>short</literal>
is the default and generates an output
that is mostly identical to the
serializes the journal into a binary
(but mostly text-based) stream
suitable for backups and network
- transfer. <literal>json</literal>
+ transfer (see <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal
+ Export Format</ulink> for more
+ information). <literal>json</literal>
formats entries as JSON data
- structures. <literal>cat</literal>
+ structures, one per
+ line (see <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/json">Journal
+ JSON Format</ulink> for more
+ information). <literal>json-pretty</literal>
+ also formats entries as JSON data
+ structures, but formats them in
+ multiple lines in order to make them
+ more readable for
+ humans. <literal>json-sse</literal>
+ also formats entries as JSON data
+ structures, but wraps them in a format
+ suitable for <ulink
+ url="https://developer.mozilla.org/en-US/docs/Server-sent_events/Using_server-sent_events">Server-Sent
+ Events</ulink>. <literal>cat</literal>
generates a very terse output only
showing the actual message of each
journal entry with no meta data, not
</varlistentry>
<varlistentry>
- <term><option>--quiet</option></term>
+ <term><option>-x</option></term>
+ <term><option>--catalog</option></term>
+
+ <listitem><para>Augment log lines with
+ explanation texts from the message
+ catalog. This will add explanatory
+ help texts to log messages in the
+ output where this is available. These
+ short help texts will explain the
+ context of an error or log event,
+ possible solutions, as well as
+ pointers to support forums, developer
+ documentation and any other relevant
+ manuals. Note that help texts are not
+ available for all messages, but only
+ for selected ones. For more
+ information on the message catalog
+ please refer to the <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/catalog">Message
+ Catalog Developer
+ Documentation</ulink>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
<term><option>-q</option></term>
+ <term><option>--quiet</option></term>
<listitem><para>Suppresses any warning
message regarding inaccessible system
</varlistentry>
<varlistentry>
- <term><option>--local</option></term>
- <term><option>-l</option></term>
+ <term><option>-m</option></term>
+ <term><option>--merge</option></term>
- <listitem><para>Show only locally
- generated messages.</para></listitem>
+ <listitem><para>Show entries
+ interleaved from all available
+ journals, including remote
+ ones.</para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--this-boot</option></term>
<term><option>-b</option></term>
+ <term><option>--this-boot</option></term>
<listitem><para>Show data only from
- current boot.</para></listitem>
+ current boot. This will add a match
+ for <literal>_BOOT_ID=</literal> for
+ the current boot ID of the
+ kernel.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-k</option></term>
+ <term><option>--dmesg</option></term>
+
+ <listitem><para>Show kernel messages from
+ current boot. This implies <option>-b</option>
+ and adds the match <literal>_TRANSPORT=kernel</literal>.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-u</option></term>
+ <term><option>--unit=</option></term>
+
+ <listitem><para>Show messages for the
+ specified systemd unit. This will add
+ a match for messages from the unit
+ (<literal>_SYSTEMD_UNIT=</literal>)
+ and additional matches for messages
+ from systemd and messages about
+ coredumps for the specified unit.</para>
+ <para>This parameter can be specified multiple times.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--user-unit=</option></term>
+
+ <listitem><para>Show messages for the
+ specified user session unit. This will
+ add a match for messages from the unit
+ (<literal>_SYSTEMD_USER_UNIT=</literal>
+ and <literal>_UID=</literal>) and
+ additional matches for messages from
+ session systemd and messages about
+ coredumps for the specified unit.</para>
+ <para>This parameter can be specified multiple times.
+ </para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-p</option></term>
+ <term><option>--priority=</option></term>
+
+ <listitem><para>Filter output by
+ message priorities or priority
+ ranges. Takes either a single numeric
+ or textual log level (i.e. between
+ 0/<literal>emerg</literal> and
+ 7/<literal>debug</literal>), or a
+ range of numeric/text log levels in
+ the form FROM..TO. The log levels are
+ the usual syslog log levels as
+ documented in
+ <citerefentry><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ i.e. <literal>emerg</literal> (0),
+ <literal>alert</literal> (1),
+ <literal>crit</literal> (2),
+ <literal>err</literal> (3),
+ <literal>warning</literal> (4),
+ <literal>notice</literal> (5),
+ <literal>info</literal> (6),
+ <literal>debug</literal> (7). If a
+ single log level is specified all
+ messages with this log level or a
+ lower (hence more important) log level
+ are shown. If a range is specified all
+ messages within the range are shown,
+ including both the start and the end
+ value of the range. This will add
+ <literal>PRIORITY=</literal> matches
+ for the specified
+ priorities.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-c</option></term>
+ <term><option>--cursor=</option></term>
+
+ <listitem><para>Start showing entries
+ from the location in the journal
+ specified by the passed
+ cursor.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--since=</option></term>
+ <term><option>--until=</option></term>
+
+ <listitem><para>Start showing entries
+ on or newer than the specified date,
+ or on or older than the specified
+ date, respectively. Date specifications should be of
+ the format "2012-10-30 18:17:16". If
+ the time part is omitted, 00:00:00 is
+ assumed. If only the seconds component
+ is omitted, :00 is assumed. If the
+ date component is omitted, the
+ current day is assumed. Alternatively
+ the strings
+ <literal>yesterday</literal>,
+ <literal>today</literal>,
+ <literal>tomorrow</literal> are
+ understood, which refer to 00:00:00 of
+ the day before the current day, the
+ current day, or the day after the
+ current day, respectively. <literal>now</literal>
+ refers to the current time. Finally,
+ relative times may be specified,
+ prefixed with <literal>-</literal> or
+ <literal>+</literal>, referring to
+ times before or after the current
+ time, respectively.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>-F</option></term>
+ <term><option>--field=</option></term>
+
+ <listitem><para>Print all possible
+ data values the specified field can
+ take in all entries of the
+ journal.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--system</option></term>
+ <term><option>--user</option></term>
+
+ <listitem><para>Show messages from
+ system services and the kernel (with
+ <option>--system</option>). Show
+ messages from service of current user
+ (with <option>--user</option>).
+ If neither is specified, show all
+ messages that the user can see.
+ </para></listitem>
</varlistentry>
<varlistentry>
- <term><option>--directory=</option></term>
<term><option>-D</option></term>
+ <term><option>--directory=</option></term>
- <listitem><para>Takes an absolute
+ <listitem><para>Takes a
directory path as argument. If
- specified will operate on the
+ specified journalctl will operate on the
specified journal directory instead of
the default runtime and system journal
paths.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>--root=<replaceable>ROOT</replaceable></option></term>
+
+ <listitem><para>Takes a directory path
+ as argument. If specified journalctl
+ will operate on catalog file hierarchy
+ underneath the specified directory
+ instead of the root directory
+ (e.g. <option>--update-catalog</option>
+ will create
+ <filename><replaceable>ROOT</replaceable>/var/lib/systemd/catalog/database</filename>).
+ </para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><option>--new-id128</option></term>
similar.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><option>--header</option></term>
+
+ <listitem><para>Instead of showing
+ journal contents show internal header
+ information of the journal fields
+ accessed.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--disk-usage</option></term>
+
+ <listitem><para>Shows the current disk
+ usage of all
+ journal files.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--list-catalog
+ <optional><replaceable>ID128...</replaceable></optional>
+ </option></term>
+
+ <listitem><para>List the contents of
+ the message catalog, as table of
+ message IDs plus their short
+ description strings.</para>
+
+ <para>If any
+ <replaceable>ID128</replaceable>s are
+ specified, only those entries are shown.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--dump-catalog
+ <optional><replaceable>ID128...</replaceable></optional>
+ </option></term>
+
+ <listitem><para>Show the contents of
+ the message catalog, with entries
+ separated by a line consisting of two
+ dashes and the id (the format is the
+ same as <filename>.catalog</filename>
+ files.</para>
+
+ <para>If any
+ <replaceable>ID128</replaceable>s are
+ specified, only those entries are shown.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--update-catalog</option></term>
+
+ <listitem><para>Update the message
+ catalog index. This command needs to
+ be executed each time new catalog
+ files are installed, removed or
+ updated to rebuild the binary catalog
+ index.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--setup-keys</option></term>
+
+ <listitem><para>Instead of showing
+ journal contents generate a new key
+ pair for Forward Secure Sealing
+ (FSS). This will generate a sealing
+ key and a verification key. The
+ sealing key is stored in the journal
+ data directory and shall remain on the
+ host. The verification key should be
+ stored externally.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--interval=</option></term>
+
+ <listitem><para>Specifies the change
+ interval for the sealing key, when
+ generating an FSS key pair with
+ <option>--setup-keys</option>. Shorter
+ intervals increase CPU consumption but
+ shorten the time range of
+ undetectable journal
+ alterations. Defaults to
+ 15min.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--verify</option></term>
+
+ <listitem><para>Check the journal file
+ for internal consistency. If the
+ file has been generated with FSS
+ enabled, and the FSS verification key
+ has been specified with
+ <option>--verify-key=</option>
+ authenticity of the journal file is
+ verified.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>--verify-key=</option></term>
+
+ <listitem><para>Specifies the FSS
+ verification key to use for the
+ <option>--verify</option>
+ operation.</para></listitem>
+ </varlistentry>
+
</variablelist>
</refsect1>
<refsect1>
<title>Environment</title>
- <variablelist>
+ <variablelist class='environment-variables'>
<varlistentry>
<term><varname>$SYSTEMD_PAGER</varname></term>
<listitem><para>Pager to use when
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service</programlisting>
<para>If the separator "<literal>+</literal>" is used
- two expression may be combined in a logical OR. The
+ two expressions may be combined in a logical OR. The
following will show all messages from the Avahi
service process with the PID 28097 plus all messages
from the D-Bus service (from any of its
<programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 + _SYSTEMD_UNIT=dbus.service</programlisting>
+ <para>Show all logs generated by the D-Bus executable:</para>
+
+ <programlisting>journalctl /usr/bin/dbus-daemon</programlisting>
+
+ <para>Show all logs of the kernel device node <filename noindex='true'>/dev/sda</filename>:</para>
+
+ <programlisting>journalctl /dev/sda</programlisting>
+
</refsect1>
<refsect1>
~ianmdlvl / elogind.git / blobdiff