-# There are a number of modifiers that are allowed to be used in the NAME or PROGRAM fields.
-# They provide the following subsitutions:
-# %n - the "kernel number" of the device.
-# for example, 'sda3' has a "kernel number" of '3'
-# %k - the kernel name for the device.
-# %M - the kernel major number for the device
-# %m - the kernel minor number for the device
-# %b - the bus id for the device
-# %c - the return value for the CALLOUT program (note, this doesn't work within
-# the PROGRAM field for the obvious reason.)
-# %D - use the devfs style disk name for this device.
-# For partitions, this will result in 'part%n'
-# If this is not a partition, it will result in 'disc'
-#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields. See the udev man page for a full description of them.
# Looking for scsi bus id 42:0:0:1
-CALLOUT, BUS="scsi", PROGRAM="/bin/echo -n test-%b", ID="test-42:0:0:1", NAME="%c"
+BUS="scsi", PROGRAM="/bin/echo -n test-%b", RESULT="test-42:0:0:1", NAME="%c"
# A usb camera.
-LABEL, BUS="usb", SYSFS_vendor="FUJIFILM", SYSFS_model="M100", NAME="camera%n"
+BUS="usb", SYSFS{vendor}="FUJIFILM", SYSFS{model}="M100", NAME="camera%n"
# USB Epson printer to be called lp_epson
-LABEL, BUS="usb", SYSFS_serial="HXOLL0012202323480", NAME="lp_epson"
+BUS="usb", SYSFS_serial="HXOLL0012202323480", NAME="lp_epson"
# USB HP printer to be called lp_hp
-LABEL, BUS="usb", SYSFS_serial="W09090207101241330", NAME="lp_hp"
+BUS="usb", SYSFS{serial}="W09090207101241330", NAME="lp_hp"
# sound card with PCI bus id 00:0b.0 to be the first sound card
-NUMBER, BUS="pci", ID="00:0b.0", NAME="dsp"
+BUS="pci", ID="00:0b.0", NAME="dsp"
# sound card with PCI bus id 00:07.1 to be the second sound card
-NUMBER, BUS="pci", ID="00:07.1", NAME="dsp1"
+BUS="pci", ID="00:07.1", NAME="dsp1"
# USB mouse plugged into the third port of the first hub to be called mouse0
-TOPOLOGY, BUS="usb", PLACE="1.3", NAME="mouse0"
+BUS="usb", PLACE="1.3", NAME="mouse0"
# USB tablet plugged into the third port of the second hub to be called mouse1
-TOPOLOGY, BUS="usb", PLACE="2.3", NAME="mouse1"
-TOPOLOGY, BUS="usb", PLACE="2.4", NAME="mouse2"
+BUS="usb", PLACE="2.3", NAME="mouse1"
+BUS="usb", PLACE="2.4", NAME="mouse2"
# ttyUSB1 should always be called visor
-REPLACE, KERNEL="ttyUSB1", NAME="visor"
-REPLACE, KERNEL="ttyUSB0", NAME="pl2303"
+KERNEL="ttyUSB1", NAME="visor"
+KERNEL="ttyUSB0", NAME="pl2303"
# a devfs like way to name some tty devices
-#REPLACE, KERNEL="ttyS*", NAME="tts/%n"
-#REPLACE, KERNEL="tty*", NAME="vc/%n"
+#KERNEL="ttyS*", NAME="tts/%n"
+#KERNEL="tty*", NAME="vc/%n"
# if this is a ide cdrom, name it the default name, and create a symlink to cdrom
-CALLOUT, BUS="ide", PROGRAM="/bin/cat /proc/ide/%k/media", ID="cdrom", NAME="%k", SYMLINK="cdrom"
+BUS="ide", KERNEL="*[!0-9]", PROGRAM="/bin/cat /proc/ide/%k/media", RESULT="cdrom", NAME="%k", SYMLINK="cdrom"
-# device mapper creates its own device nodes
-IGNORE, KERNEL="dm-[0-9]*"
+# device mapper creates its own device nodes so ignore these
+KERNEL="dm-[0-9]*", NAME=""
# DRI devices always go into a subdirectory (as per the LSB spec)
-REPLACE, KERNEL="card*", NAME="dri/card%n"
+KERNEL="card*", NAME="dri/card%n"
+
+# alsa devices
+KERNEL="controlC[0-9]*", NAME="snd/%k"
+KERNEL="hw[CD0-9]*", NAME="snd/%k"
+KERNEL="pcm[CD0-9cp]*", NAME="snd/%k"
+KERNEL="midi[CD0-9]*", NAME="snd/%k"
+KERNEL="timer", NAME="snd/%k"
+KERNEL="seq", NAME="snd/%k"
+
+# input devices
+KERNEL="mice", NAME="input/%k"
+KERNEL="mouse*", NAME="input/%k"
+KERNEL="event*", NAME="input/%k"
+KERNEL="js*", NAME="input/%k"
+KERNEL="ts*", NAME="input/%k"
~ianmdlvl / elogind.git / blobdiff