chiark / gitweb /
systemctl: if we managed to reexec the init system via the bus don't retry via signal
[elogind.git] / TODO
diff --git a/TODO b/TODO
index 80faf0fa3f17a641f26e421afb1b05475d4103f9..677e1c9f4f09e18699bf5395642f64af425daf6c 100644 (file)
--- a/TODO
+++ b/TODO
-F15:
+Bugfixes:
 
 * swap units that are activated by one name but shown in the kernel under another are semi-broken
 
-* NFS, networkmanager ordering issue (PENDING)
-
 * NM should pull in network.target (PENDING)
   https://bugzilla.redhat.com/show_bug.cgi?id=692008
 
-* bluetooth should be possible to disable (PENDING)
+* make anaconda write timeout=0 for encrypted devices
 
-* add fstab fields to add wait timeouts, change Wants to Requires by local-fs.target
+* fix broken Sockets=syslog-ng.socket packaging
 
-* bind mounts are ignored
-  https://bugzilla.redhat.com/show_bug.cgi?id=682662
+* logind: ensure ACLs are updated on login and logout
 
-* 0595f9a1c182a84581749823ef47c5f292e545f9 is borked, freezes shutdown
-    (path: after installing inotify watches, recheck file again to fix race)
+* fix CUPS .path unit for globbing
 
-* get writev() /dev/kmsg support into the F15 kernel
-    https://lkml.org/lkml/2011/4/6/473
-  patched merged into -mm
+* service: pid file reading after reload doesn't work, since we don't reset the pid variable
 
-* fix sd_is_socket() invocation in dbus
+* make sure timeouts are applied to Type=oneshot services.
 
-* fix default timeout values mentioned in man page
+Features:
 
-* New CK release, with sysinit.target dropping and TTY loop
+* something like ConditionExec= or ExecStartPre= without failure state
 
-* New Avahi package, enable it by default
+* service restart retry configuration
 
-* don't trim empty cgroups
-  https://bugzilla.redhat.com/show_bug.cgi?id=678555
+* tmpfiles: apply "x" on "D" too (see patch from William Douglas)
+* tmpfiles: support generation of char/block devices, symlinks and one-line files (think sysfs)
 
-Features:
+* Introduce ControlGroupPersistant=yes to set +t on the tasks file when creating the cgroup
 
-* use pivot_root on shutdown so that we can unmount the root directory.
+* don't set $HOME in services unless requested
 
-* fix alsa mixer restore to not print error when no config is stored
+* remove hacks in vala code and require libnotify 0.7
 
-* show enablement status in systemctl status
+* hide PAM/TCPWrap options in fragment parser when compile time disabled
 
-* write blog stories about:
-  - enabling dbus services
-  - status update
-  - you are a distro: why switch?
+* when we automatically restart a service, ensure we retsart its rdeps, too.
 
-* allow port = 0 in .socket units
+* allow Type=simple with PIDFile=
+  https://bugzilla.redhat.com/show_bug.cgi?id=723942
 
-* rename systemd-logger to systemd-stdio-syslog-bridge
+* move PAM code into its own binary
 
-* introduce /usr/lib/binfmt.d/, /usr/lib/tmpfiles.d/
+* warn if the user stops a service but not its associated socket
 
-* take BSD file lock on tty devices when using them?
+* logind: spawn user@..service on login
 
-* avoid any flag files, or readahead files in /, we need to support r/o /
-  or / on tmpfs like Android setups.
+* logind: non-local X11 server handling
 
-* move readahead files into /var, look for them with .path units
+* logind: use sysfs path in device hash table instead of sysname, as soon as fb driver is fixed
 
-* teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
+* implement Register= switch in .socket units to enable registration
+  in Avahi, RPC and other socket registration services.
 
-* get process transport into dbus for systemctl -P/-H
+* make sure people don't leave processes around after ExecStartPre=
 
-* document default dependencies
+* make sure systemd-ask-password-wall does not shutdown systemd-ask-password-console too early
 
-* support systemd.whitelist=/systemd.blacklist= on the kernel command
-  line.
+* readahead: use BTRFS_IOC_DEFRAG_RANGE instead of BTRFS_IOC_DEFRAG ioctl, with START_IO
 
-* Find a way to replace /var/run, /var/lock directories with
-  symlinks during an RPM package upgrade (filesystem.rpm or systemd.rpm).
-  (lua code to create symlinks right away for new installations is in filesytem.rpm now)
-  We soon want to get rid of var-run.mount var-lock.mount units:
-    if mountpoint /run ; then
-          umount /var/run || :
-    else
-          mount --move /var/run /run || mount --bind /var/run /run
-    fi
-    mv /var/run /var/.run.save
-    ln -s /run /var/run
-    echo "R /var/.run.save" > /etc/tmpfiles.d/remove-run-save.conf
+* readahead: check whether a btrfs volume includes ssd by checking mount flag "ssd"
 
-* when key file cannot be found, read it from kbd in cryptsetup
+* support sd_notify() style notification when reload begins (RELOADING=1), reload is finished (READY=1)
 
-* add switch to systemctl to show enabled but not running services. Or
-  another switch that shows service that have been running since
-  booting but aren't running anymore.
+* support sd_notify() style notification when shutting down, to make auto-exit bus services work (STOPPING=1)
 
-* reuse mkdtemp namespace dirs in /tmp?
+* verify that the AF_UNIX sockets of a service in the fs still exist
+  when we start a service in order to avoid confusion when a user
+  assumes starting a service is enough to make it accessible
 
-* recreate systemd's D-Bus private socket file on SIGUSR2
+* Make it possible to set the keymap independently from the font on
+  the kernel cmdline. Right now setting one resets also the other.
 
-* be more specific what failed:
-    ...
-    Unmounting file systems.
-    Not all file systems unmounted, 1 left.
-    Disabling swaps.
-    Detaching loop devices.
-    Detaching DM devices.
-    Cannot finalize remaining file systems and devices, trying to kill remaining processes.
-    Unmounting file systems.
-    Not all file systems unmounted, 1 left.
-    Cannot finalize remaining file systems and devices, giving up.
-    ...
-
-* check for compiled-in, but not active selinux, and don't print any warnings
-  about policy loading. Probably check for available selinux in /proc/filesystems,
-  and check for active selinux with getcon_raw() == "kernel"
+* move nss-myhostname into systemd
 
-* Support --test based on current system state
+* and a dbus call to generate target from current state
 
-* systemctl enable as D-Bus call
+* detect LXC with $container=lxc
 
-* consider services with any kind of link in /etc/systemd/system enabled
+* drop /.readahead on bigger upgrades with yum
 
-* show failure error string in "systemctl status"
+* add inode nr check to readahead to suppress preloading changed files
 
-* make sure timeouts are applied to Type=oneshot services.
-
-* Maybe implement "systemctl mask" and "systemctl unmask", but not
-  document it? When doing that add switch to make this temporary by
-  placing mask links in /dev.
+* add support for /bin/mount -s
 
-* detect LXC environment
+* GC unreferenced jobs (such as .device jobs)
 
-* invoke vhangup() before and after invoking getty
-    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3c95c985fa91ecf6a0e29622bbdd13dcfc5ce9f1
+* avoid DefaultStandardOutput=syslog to have any effect on StandardInput=socket services
 
-* support "auto" and "comment=systemd.automount" at the same time for an fstab entry
+* cgroup_notify_empty(): recursively check groups up the tree, too
 
-* Maybe store in unit files whether a service should be enabled by default on package installation
-  (belongs into a distro pattern though, not in an upstream package's service file)
+* when failing to start a service due to ratelimiting, try again later, if restart=always is set
 
-* perhaps add "systemctl reenable" as combination of "systemctl disable" and "systemctl enable"
+* write blog stories about:
+  - enabling dbus services
+  - status update
+  - how to make changes to sysctl and sysfs attributes
+  - remote access
+  - cgroup best pratices to avoid stepping on each others toes
+  - how to pass throw-away units to systemd, or dynamically change properties of existing units
+  - how to integrate cgconfig and suchlike with systemd
+  - security properties
 
-* need a way to apply mount options of api vfs from systemd unit files
-  (or some other modern source?) instead of fstab?
+* allow port=0 in .socket units
 
-* maybe introduce ExecRestartPre=
+* move readahead files into /var, look for them with .path units
 
+* teach dbus to activate all services it finds in /etc/systemd/services/org-*.service
 * figure out what happened to bluez patch
 
+* support systemd.mask= on the kernel command line.
+
+* when key file cannot be found, read it from kbd in cryptsetup
+
+* reuse mkdtemp namespace dirs in /tmp?
+
+* recreate systemd's D-Bus private socket file on SIGUSR2
+
+* Support --test based on current system state
+
+* investigate whether the gnome pty helper should be moved into systemd, to provide cgroup support.
+
+* maybe introduce ExecRestartPre=
+
 * Patch systemd-fsck to use -C and pass console fd to it
 
 * configurable jitter for timer events
 
+* timer events with system resume
+
+* timer events on calendar time
+
 * Support ProcessNeededForShutdown=true to allow stuff like mdmon to
   be killed very late after the rootfs is read only? If implement pass
   this to shutdown binary via command line argument.
 
-* Integrate "mdadm --wait-clean". Maybe just let SIGTERM to mdmon trigger the
-  needed action
-
 * dot output for --test showing the 'initial transaction'
 
 * calendar time support in timer, iCalendar semantics for the timer stuff (RFC2445)
-  - check timerfd() patch: http://lkml.org/lkml/2010/11/23/290
-
-* systemd --user
-  - get PR_SET_ANCHOR merged: http://lkml.org/lkml/2010/2/2/165
-
-* add VT tracking:
-  - provide CK functionality
-  - start getty only when actual vt switch happens (same model as
-    socket on-demand activation). allocate the next free tty and
-    start a getty there. this way, pressing alt-f[1-12] will switch
-    through running X and getty sessions, and any unallocated
-    activated tty will start a new getty. the hardcoding of
-    getty[1-6] will entirely go away.
-  - http://git.kernel.org/?p=linux/kernel/git/gregkh/tty-2.6.git;a=commitdiff;h=fbc92a3455577ab17615cbcb91826399061bd789
+    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=99ee5315dac6211e972fa3f23bcc9a0343ff58c4
 
 * implicitly import "defaults" settings file into all types
+* exec settings override
+* writable cgroups dbus properties for live changes
 
 * port over to LISTEN_FDS/LISTEN_PID:
-   - uuidd    HAVEPATCH
    - rpcbind (/var/run/rpcbind.sock!) HAVEPATCH
    - cups     HAVEPATCH
    - postfix, saslauthd
@@ -181,29 +152,38 @@ Features:
    - bluetoothd (/var/run/sdp! @/org/bluez/audio!)
    - distccd
 
-* fingerprint.target, wireless.target, gps.target, netdevice.target
+* auditd service files
 
-* set_put(), hashmap_put() return values check. i.e. == 0 doesn't free()!
+* fingerprint.target, wireless.target, gps.target, netdevice.target
 
 * io priority during initialization
 
 * if a service fails too often, make the service enter failed mode, and the socket, too.
 
-* systemctl list-jobs - show dependencies
+* new deps "Triggers" and "TriggeredBy"
 
-* auditd service files
+* systemctl list-jobs - show dependencies
 
 * add systemctl switch to dump transaction without executing it
 
 * suspend, resume support?
 
-* readahead: btrfs/LVM SSD detection
+* drop cap bounding set in readahead and other services
 
-* add separate man page for [Install] settings
+External:
 
-* allow runtime changing of log level and target
+* dbus:
+   - get process transport into dbus for systemctl -P/-H (PENDING)
+   - dbus --user
+   - natively watch for dbus-*.service symlinks (PENDING)
+   - allow specification of socket mode/umask when allocating DBusServer
+   - allow disabling of fd passing when connecting a AF_UNIX connection
+   - allow disabling of UID passing for AUTH EXTERNAL
 
-External:
+* systemd --user
+    PR_SET_CHILD_REAPER patch: https://lkml.org/lkml/2011/7/28/426
+
+* fix alsa mixer restore to not print error when no config is stored
 
 * udisks should not use udisks-part-id, instead use blkid. also not probe /dev/loopxxx
 
@@ -213,32 +193,15 @@ External:
 
 * make cryptsetup lower --iter-time
 
-* patch kernel for xattr support in /dev, /proc/, /sys and /sys/fs/cgroup.
+* patch kernel for xattr support in /dev, /proc/, /sys and /sys/fs/cgroup?
 
 * patch kernel for cpu feature modalias for autoloading aes/kvm/...
     http://git.kernel.org/?p=linux/kernel/git/ak/linux-misc-2.6.git;a=shortlog;h=refs/heads/cpuid-match
   (Rafael J. Wysocki's sysdev rework is on the way. After that CPUs can be exported a proper bus.)
 
-* procps, psmisc, sysvinit-tools, hostname → util-linux-ng
-
-https://bugzilla.redhat.com/show_bug.cgi?id=614245 -- plymouth
-https://bugzilla.redhat.com/show_bug.cgi?id=612789 -- umount /cgroup on halt
-https://bugzilla.redhat.com/show_bug.cgi?id=612728 -- /etc/rc.d/init.d/functions
-https://bugzilla.redhat.com/show_bug.cgi?id=612712 -- pam_systemd
-https://bugs.freedesktop.org/show_bug.cgi?id=29193 -- accountsservice
-https://bugs.freedesktop.org/show_bug.cgi?id=29194 -- ConsoleKit
-https://bugs.freedesktop.org/show_bug.cgi?id=29205 -- udisks
-http://article.gmane.org/gmane.linux.bluez.kernel/6479 -- bluez
-http://www.spinics.net/lists/linux-nfs/msg14371.html -- rpcbind
-https://bugzilla.redhat.com/show_bug.cgi?id=617328 -- ntp
-https://bugzilla.redhat.com/show_bug.cgi?id=617320 -- at
-https://bugzilla.redhat.com/show_bug.cgi?id=617326 -- fprintd
-https://bugzilla.redhat.com/show_bug.cgi?id=617333 -- yum
-https://bugzilla.redhat.com/show_bug.cgi?id=617317 -- acpid
-https://bugzilla.redhat.com/show_bug.cgi?id=617327 -- gpm
-https://bugzilla.redhat.com/show_bug.cgi?id=617330 -- pcsc-lite
-https://bugzilla.redhat.com/show_bug.cgi?id=617321 -- audit
-https://bugzilla.redhat.com/show_bug.cgi?id=617316 -- abrt
+* kernel: add /proc/sys file exposing CAP_LAST_CAP? sysconf?
+
+* kernel: add device_type = "fb", "fbcon" to class "graphics"
 
 Regularly:
 
@@ -252,4 +215,4 @@ Regularly:
 
 * pahole
 
-* CFLAGS="-Wl,--gc-sections -Wl,--print-gc-sections -ffunction-sections -fdata-sections"
+* set_put(), hashmap_put() return values check. i.e. == 0 doesn't free()!