don't log error if database does not exist

[elogind.git] / RELEASE-NOTES

diff --git a/RELEASE-NOTES b/RELEASE-NOTES
index 69166cfef1e16c1ae361e07569a59356aabce27c..19af28fb66a719a1075c918a60781e1f3c6c35e3 100644 (file)
--- a/RELEASE-NOTES
+++ b/RELEASE-NOTES
@@ -1,3 +1,19 @@
+udev 078
+========
+Symlinks are now exported to the event environment. Hopefully it's no
+longer needed to run udevinfo from an event process, like it was
+mentioned on the hotplug list:
+  UDEV  [1134776873.702967] add@/block/sdb
+  ...
+  DEVNAME=/dev/sdb
+  DEVLINKS=/dev/disk/by-id/usb-IBM_Memory_Key_0218B301030027E8 /dev/disk/by-path/usb-0218B301030027E8:0:0:0
+
+udev 077
+========
+Fix a problem if udevsend is used as the hotplug handler and tries to use
+syslog, which causes a "vc" event loop. 2.6.15 will make udevsend obsolete
+and this kind of problems will hopefully go away soon.
+
 udev 076
 ========
 All built-in logic to work around bad sysfs timing is removed with this
@@ -7,9 +23,26 @@ the timing of the "bus" link creation, the former integrated logic should
 be emulated by a rule placed before all other rules:
   ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
 
-The option "udev_db" does no longer exist. All udev state will always
-be in /$udev_root/.udev/ now, there is no longer an option to set this
+The option "udev_db" does no longer exist. All udev state will be in
+/$udev_root/.udev/ now, there is no longer an option to set this
 to anything else.
+If the init script or something else used this value, just depend on
+this hardcoded path. But remember _all_content_ of this directory is
+still private to udev and can change at any time.
+
+Default location for rule sripts and helper programs is now: /lib/udev/.
+Everything that is not useful on the commandline should go into this
+directory. Some of the helpers in the extras folder are installed there
+now. The rules need to be changed, to find the helpers there.
+
+Also /lib/udev/devices is recommended as a directory where packages or
+the user can place real device nodes, which get copied over to /dev at
+every boot. This should replace the various solutions with custom config
+files.
+
+Udevsend does no longer start the udev daemon. This must be done with
+the init script that prepares /dev on tmpfs and creates the initial nodes,
+before starting the daemon.
 
 udev 075
 ========