version.
The upstream udev project's set of default rules may require a most recent
-kernel release to work properly. This is currently version 2.6.31.
+kernel release to work properly. This is currently version 2.6.32.
Tools and rules shipped by udev are not public API and may change at any time.
-Never call any private tool in /lib/udev from any external application; it might
-just go away in the next release. Access to udev information is only offered
-by udevadm and libudev. Tools and rules in /lib/udev and the entire contents of
-the /dev/.udev directory are private to udev and do change whenever needed.
+Never call any private tool in /usr/lib/udev from any external application; it
+might just go away in the next release. Access to udev information is only offered
+by udevadm and libudev. Tools and rules in /usr/lib/udev and the entire contents
+of the /run/udev directory are private to udev and do change whenever needed.
Requirements:
- - Version 2.6.27 of the Linux kernel with sysfs, procfs, signalfd, inotify,
- unix domain sockets, networking and hotplug enabled:
+ - Version 2.6.34 of the Linux kernel with sysfs, procfs, signalfd, inotify,
+ unix domain sockets, networking and hotplug enabled
+
+ - Some architectures might need a later kernel, that supports accept4(),
+ or need to backport the accept4() syscall wiring in the kernel.
+
+ - These options are needed:
CONFIG_HOTPLUG=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_NET=y
CONFIG_SYSFS=y
CONFIG_SYSFS_DEPRECATED*=n
CONFIG_PROC_FS=y
- CONFIG_TMPFS=y
CONFIG_INOTIFY_USER=y
CONFIG_SIGNALFD=y
+
+ - These options might be needed:
+ CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y (user ACLs for device nodes)
CONFIG_BLK_DEV_BSG=y (SCSI devices)
be mounted at /sys. No other locations are supported by a standard
udev installation.
- - The system must have the following group names resolvable at udev startup:
+ - The default rule sset requires the following group names resolvable at udev startup:
disk, cdrom, floppy, tape, audio, video, lp, tty, dialout, and kmem.
Especially in LDAP setups, it is required that getgrnam() be able to resolve
these group names with only the rootfs mounted and while no network is
available.
- - The 'udev extras' has the following dependencies:
- libacl, libglib2, libusb, usbutils, pciutils, and gperf.
- These dependencies can be disabled with the --disable-extras configure option.
+ - Some udev extras have external dependencies like:
+ libacl, libglib2, usbutils, pciutils, and gperf.
+ All these extras can be disabled with configure options.
Setup:
- At bootup, the /dev directory should get the 'devtmpfs' filesystem
mounted. Udev manages the permissions and ownership of the kernel-created
device nodes, and udev possibly creates additional symlinks. If needed, udev also
- works on an empty 'tmpfs' filesystem, but some static device nodes like
- /dev/null, /dev/console, /dev/kmsg are needed to be able to start udev itself.
+ works on an empty 'tmpfs' filesystem, but some device nodes like
+ /dev/null, /dev/console, /dev/kmsg should be created before udevd is started.
- The udev daemon should be started to handle device events sent by the kernel.
- During bootup, the kernel can be asked to send events for all already existing
- devices, to apply the configuration to these devices. This is usually done by:
- /sbin/udevadm trigger --type=subsystems
- /sbin/udevadm trigger --type=devices
+ During bootup, the events for already existing devices can be replayed, so
+ that they are configured by udev. This is usually done by:
+ udevadm trigger --action=add --type=subsystems
+ udevadm trigger --action=add --type=devices
- - Restarting the daemon does never apply any rules to existing devices.
+ - Restarting the daemon never applies any rules to existing devices.
- New/changed rule files are picked up automatically; there is no daemon
restart or signal needed.
Operation:
- - Udev creates/removes device nodes in /dev, based on events the kernel
- sends out on device creation/removal.
+ - Based on events the kernel sends out on device creation/removal, udev
+ creates/removes device nodes and symlinks in the /dev directory.
- All kernel events are matched against a set of specified rules, which
possibly hook into the event processing and load required kernel
- modules to setup devices. For all devices the kernel exports a major/minor
+ modules to set up devices. For all devices, the kernel exports a major/minor
number; if needed, udev creates a device node with the default kernel
- name. If specified, udev applies permissions/ownership to the device
+ device name. If specified, udev applies permissions/ownership to the device
node, creates additional symlinks pointing to the node, and executes
programs to handle the device.
http://www.kernel.org/pub/linux/utils/kernel/hotplug/libudev/
http://www.kernel.org/pub/linux/utils/kernel/hotplug/gudev/
-For more details about udev and udev rules see the udev(7) man page.
+For more details about udev and udev rules, see the udev man pages:
+ http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev/
Please direct any comment/question to the linux-hotplug mailing list at:
linux-hotplug@vger.kernel.org
~ianmdlvl / elogind.git / blobdiff