systemd System and Service Manager
+CHANGES WITH 217:
+
+ * journalctl gained the new options -t/--identifier= to match
+ on the syslog identifier (aka "tag"), as well as --utc to
+ show log timestamps in the UTC timezone. journalctl now also
+ accepts -n/--lines=all to disable line capping in a pager.
+
+ * journalctl gained a new switch, --flush, that synchronously
+ flushes logs from /run/log/journal to /var/log/journal if
+ persistent storage is enabled. systemd-journal-flush.service
+ now waits until the operation is complete.
+
+ * Services can notify the manager before they start a reload
+ (by sending RELOADING=1) or shutdown (by sending
+ STOPPING=1). This allows the manager to track and show the
+ internal state of daemons and closes a race condition when
+ the process is still running but has closed its D-Bus
+ connection.
+
+ * Services with Type=oneshot do not have to have any ExecStart
+ commands anymore.
+
+ * User units are now loaded also from
+ $XDG_RUNTIME_DIR/systemd/user/. This is similar to the
+ /run/systemd/user directory that was already previously
+ supported, but is under the control of the user.
+
+ * Job timeouts (i.e. time-outs on the time a job that is
+ queued stays in the run queue) can now optionally result in
+ immediate reboot or power-off actions (JobTimeoutAction= and
+ JobTimeoutRebootArgument=). This is useful on ".target"
+ units, to limit the maximum time a target remains
+ undispatched in the run queue, and to trigger an emergency
+ operation in such a case. This is now used by default to
+ turn off the system if boot-up (as defined by everything in
+ basic.target) hangs and does not complete for at least
+ 15min. Also, if power-off or reboot hang for at least 30min
+ an immediate power-off/reboot operation is triggered. This
+ functionality is particularly useful to increase reliability
+ on embedded devices, but also on laptops which might
+ accidentally get powered on when carried in a backpack and
+ whose boot stays stuck in a hard disk encryption passphrase
+ question.
+
+ * systemd-logind can be configured to also handle lid switch
+ events even when the machine is docked or multiple displays
+ are attached (HandleLidSwitchDocked= option).
+
+ * A helper binary and a service have been added which can be
+ used to resume from hibernation in the initramfs. A
+ generator will parse the resume= option on the kernel
+ command line to trigger resume.
+
+ * A user console daemon systemd-consoled has been
+ added. Currently, it is a preview, and will so far open a
+ single terminal on each session of the user marked as
+ Desktop=systemd-console.
+
+ * Route metrics can be specified for DHCP routes added by
+ systemd-networkd.
+
+ * The SELinux context of socket-activated services can be set
+ from the information provided by the networking stack
+ (SELinuxContextFromNet= option).
+
+ * Userspace firmware loading support has been removed and
+ the minimum supported kernel version is thus bumped to 3.7.
+
+ * Timeout for udev workers has been increased from 1 to 3
+ minutes, but a warning will be printed after 1 minute to
+ help diagnose kernel modules that take a long time to load.
+
+ * Udev rules can now remove tags on devices with TAG-="foobar".
+
+ * systemd's readahead implementation has been removed. In many
+ circumstances it didn't give expected benefits even for
+ rotational disk drives and was becoming less relevant in the
+ age of SSDs. As none of the developers has been using
+ rotating media anymore, and nobody stepped up to actively
+ maintain this component of systemd it has now been removed.
+
+ * Swap units can use Options= to specify discard options.
+ Discard options specified for swaps in /etc/fstab are now
+ respected.
+
+ * Docker containers are now detected as a separate type of
+ virtualization.
+
+ * The Password Agent protocol gained support for queries where
+ the user input is shown, useful e.g. for user names.
+ systemd-ask-password gained a new --echo option to turn that
+ on.
+
+ * The default sysctl.d/ snippets will now set:
+
+ net.core.default_qdisc = fq_codel
+
+ This selects Fair Queuing Controlled Delay as the default
+ queuing discipline for network interfaces. fq_codel helps
+ fight the network bufferbloat problem. It is believed to be
+ a good default with no tuning required for most workloads.
+ Downstream distributions may override this choice. On 10Gbit
+ servers that do not do forwarding, "fq" may perform better.
+ Systems without a good clocksource should use "pfifo_fast".
+
+ * If kdbus is enabled during build a new option BusPolicy= is
+ available for service units, that allows locking all service
+ processes into a stricter bus policy, in order to limit
+ access to various bus services, or even hide most of them
+ from the service's view entirely.
+
+ * networkctl will now show the .network and .link file
+ networkd has applied to a specific interface.
+
+ * sd-login gained a new API call sd_session_get_desktop() to
+ query which desktop environment has been selected for a
+ session.
+
+ * UNIX utmp support is now compile-time optional to support
+ legacy-free systems.
+
+ * systemctl gained two new commands "add-wants" and
+ "add-requires" for pulling in units from specific targets
+ easily.
+
+ * If the word "rescue" is specified on the kernel command line
+ the system will now boot into rescue mode (aka
+ rescue.target), which was previously available only by
+ specifying "1" or "systemd.unit=rescue.target" on the kernel
+ command line. This new kernel command line option nicely
+ mirrors the already existing "emergency" kernel command line
+ option.
+
+ * New kernel command line options mount.usr=, mount.usrflags=,
+ mount.usrfstype= have been added that match root=, rootflags=,
+ rootfstype= but allow mounting a specific file system to
+ /usr.
+
+ * The $NOTIFY_SOCKET is now also passed to control processes of
+ services, not only the main process.
+
+ * This version reenables support for fsck's -l switch. This
+ means at least version v2.25 of util-linux is required for
+ operation, otherwise dead-locks on device nodes may
+ occur. Again: you need to update util-linux to at least
+ v2.25 when updating systemd to v217.
+
+ * The "multi-seat-x" tool has been removed from systemd, as
+ its functionality has been integrated into X servers 1.16,
+ and the tool is hence redundant. It is recommended to update
+ display managers invoking this tool to simply invoke X
+ directly from now on, again.
+
+ * Support for the new ALLOW_INTERACTIVE_AUTHORIZATION D-Bus
+ message flag has been added for all of systemd's PolicyKit
+ authenticated method calls has been added. In particular
+ this now allows optional interactive authorization via
+ PolicyKit for many of PID1's privileged operations such as
+ unit file enabling and disabling.
+
+ * "udevadm hwdb --update" learnt a new switch "--usr" for
+ placing the rebuilt hardware database in /usr instead of
+ /etc. When used only hardware database entries stored in
+ /usr will be used, and any user database entries in /etc are
+ ignored. This functionality is useful for vendors to ship a
+ pre-built database on systems where local configuration is
+ unnecessary or unlikely.
+
+ * Calendar time specifications in .timer units now also
+ understand the strings "semi-annually", "quarterly" and
+ "minutely" as shortcuts (in addition to the preexisting
+ "anually", "hourly", ...).
+
+ * systemd-tmpfiles will now correctly create files in /dev
+ at boot which are marked for creation only at boot. It is
+ recommended to always create static device nodes with 'c!'
+ and 'b!', so that they are created only at boot and not
+ overwritten at runtime.
+
+ * When the watchdog logic is used for a service (WatchdogSec=)
+ and the watchdog timeout is hit the service will now be
+ terminated with SIGABRT (instead of just SIGTERM), in order
+ to make sure a proper coredump and backtrace is
+ generated. This ensures that hanging services will result in
+ similar coredump/backtrace behaviour as services that hit a
+ segmentation fault.
+
+ Contributions from: Andreas Henriksson, Andrei Borzenkov,
+ Angus Gibson, Ansgar Burchardt, Ben Wolsieffer, Brandon L.
+ Black, Christian Hesse, Cristian Rodríguez, Daniel Buch,
+ Daniele Medri, Daniel Mack, Dan Williams, Dave Reisner, David
+ Herrmann, David Sommerseth, David Strauss, Emil Renner
+ Berthing, Eric Cook, Evangelos Foutras, Filipe Brandenburger,
+ Gustavo Sverzut Barbieri, Hans de Goede, Harald Hoyer, Hristo
+ Venev, Hugo Grostabussiat, Ivan Shapovalov, Jan Janssen, Jan
+ Synacek, Jonathan Liu, Juho Son, Karel Zak, Kay Sievers, Klaus
+ Purer, Koen Kooi, Lennart Poettering, Lukas Nykryn, Lukasz
+ Skalski, Łukasz Stelmach, Mantas Mikulėnas, Marcel Holtmann,
+ Marius Tessmann, Marko Myllynen, Martin Pitt, Michael Biebl,
+ Michael Marineau, Michael Olbrich, Michael Scherer, Michal
+ Schmidt, Michal Sekletar, Miroslav Lichvar, Patrik Flykt,
+ Philippe De Swert, Piotr Drąg, Rahul Sundaram, Richard
+ Weinberger, Robert Milasan, Ronny Chevalier, Ruben Kerkhof,
+ Santiago Vila, Sergey Ptashnick, Simon McVittie, Sjoerd
+ Simons, Stefan Brüns, Steven Allen, Steven Noonan, Susant
+ Sahani, Sylvain Plantefève, Thomas Hindoe Paaboel Andersen,
+ Timofey Titovets, Tobias Hunger, Tom Gundersen, Torstein
+ Husebø, Umut Tezduyar Lindskog, WaLyong Cho, Zbigniew
+ Jędrzejewski-Szmek.
+
+ -- Berlin, 2014-10-28
+
+CHANGES WITH 216:
+
+ * timedated no longer reads NTP implementation unit names from
+ /usr/lib/systemd/ntp-units.d/*.list. Alternative NTP
+ implementations should add a
+
+ Conflicts=systemd-timesyncd.service
+
+ to their unit files to take over and replace systemd's NTP
+ default functionality.
+
+ * systemd-sysusers gained a new line type "r" for configuring
+ which UID/GID ranges to allocate system users/groups
+ from. Lines of type "u" may now add an additional column
+ that specifies the home directory for the system user to be
+ created. Also, systemd-sysusers may now optionally read user
+ information from STDIN instead of a file. This is useful for
+ invoking it from RPM preinst scriptlets that need to create
+ users before the first RPM file is installed since these
+ files might need to be owned by them. A new
+ %sysusers_create_inline RPM macro has been introduced to do
+ just that. systemd-sysusers now updates the shadow files as
+ well as the user/group databases, which should enhance
+ compatibility with certain tools like grpck.
+
+ * A number of bus APIs of PID 1 now optionally consult
+ PolicyKit to permit access for otherwise unprivileged
+ clients under certain conditions. Note that this currently
+ doesn't support interactive authentication yet, but this is
+ expected to be added eventually, too.
+
+ * /etc/machine-info now has new fields for configuring the
+ deployment environment of the machine, as well as the
+ location of the machine. hostnamectl has been updated with
+ new command to update these fields.
+
+ * systemd-timesyncd has been updated to automatically acquire
+ NTP server information from systemd-networkd, which might
+ have been discovered via DHCP.
+
+ * systemd-resolved now includes a caching DNS stub resolver
+ and a complete LLMNR name resolution implementation. A new
+ NSS module "nss-resolve" has been added which can be used
+ instead of glibc's own "nss-dns" to resolve hostnames via
+ systemd-resolved. Hostnames, addresses and arbitrary RRs may
+ be resolved via systemd-resolved D-Bus APIs. In contrast to
+ the glibc internal resolver systemd-resolved is aware of
+ multi-homed system, and keeps DNS server and caches separate
+ and per-interface. Queries are sent simultaneously on all
+ interfaces that have DNS servers configured, in order to
+ properly handle VPNs and local LANs which might resolve
+ separate sets of domain names. systemd-resolved may acquire
+ DNS server information from systemd-networkd automatically,
+ which in turn might have discovered them via DHCP. A tool
+ "systemd-resolve-host" has been added that may be used to
+ query the DNS logic in resolved. systemd-resolved implements
+ IDNA and automatically uses IDNA or UTF-8 encoding depending
+ on whether classic DNS or LLMNR is used as transport. In the
+ next releases we intend to add a DNSSEC and mDNS/DNS-SD
+ implementation to systemd-resolved.
+
+ * A new NSS module nss-mymachines has been added, that
+ automatically resolves the names of all local registered
+ containers to their respective IP addresses.
+
+ * A new client tool "networkctl" for systemd-networkd has been
+ added. It currently is entirely passive and will query
+ networking configuration from udev, rtnetlink and networkd,
+ and present it to the user in a very friendly
+ way. Eventually, we hope to extend it to become a full
+ control utility for networkd.
+
+ * .socket units gained a new DeferAcceptSec= setting that
+ controls the kernels' TCP_DEFER_ACCEPT sockopt for
+ TCP. Similar, support for controlling TCP keep-alive
+ settings has been added (KeepAliveTimeSec=,
+ KeepAliveIntervalSec=, KeepAliveProbes=). Also, support for
+ turning off Nagle's algorithm on TCP has been added
+ (NoDelay=).
+
+ * logind learned a new session type "web", for use in projects
+ like Cockpit which register web clients as PAM sessions.
+
+ * timer units with at least one OnCalendar= setting will now
+ be started only after timer-sync.target has been
+ reached. This way they will not elapse before the system
+ clock has been corrected by a local NTP client or
+ similar. This is particular useful on RTC-less embedded
+ machines, that come up with an invalid system clock.
+
+ * systemd-nspawn's --network-veth= switch should now result in
+ stable MAC addresses for both the outer and the inner side
+ of the link.
+
+ * systemd-nspawn gained a new --volatile= switch for running
+ container instances with /etc or /var unpopulated.
+
+ * The kdbus client code has been updated to use the new Linux
+ 3.17 memfd subsystem instead of the old kdbus-specific one.
+
+ * systemd-networkd's DHCP client and server now support
+ FORCERENEW. There are also new configuration options to
+ configure the vendor client identifier and broadcast mode
+ for DHCP.
+
+ * systemd will no longer inform the kernel about the current
+ timezone, as this is necessarily incorrect and racy as the
+ kernel has no understanding of DST and similar
+ concepts. This hence means FAT timestamps will be always
+ considered UTC, similar to what Android is already
+ doing. Also, when the RTC is configured to the local time
+ (rather than UTC) systemd will never synchronize back to it,
+ as this might confuse Windows at a later boot.
+
+ * systemd-analyze gained a new command "verify" for offline
+ validation of unit files.
+
+ * systemd-networkd gained support for a couple of additional
+ settings for bonding networking setups. Also, the metric for
+ statically configured routes may now be configured. For
+ network interfaces where this is appropriate the peer IP
+ address may now be configured.
+
+ * systemd-networkd's DHCP client will no longer request
+ broadcasting by default, as this tripped up some networks.
+ For hardware where broadcast is required the feature should
+ be switched back on using RequestBroadcast=yes.
+
+ * systemd-networkd will now set up IPv4LL addresses (when
+ enabled) even if DHCP is configured successfully.
+
+ * udev will now default to respect network device names given
+ by the kernel when the kernel indicates that these are
+ predictable. This behavior can be tweaked by changing
+ NamePolicy= in the relevant .link file.
+
+ * A new library systemd-terminal has been added that
+ implements full TTY stream parsing and rendering. This
+ library is supposed to be used later on for implementing a
+ full userspace VT subsystem, replacing the current kernel
+ implementation.
+
+ * A new tool systemd-journal-upload has been added to push
+ journal data to a remote system running
+ systemd-journal-remote.
+
+ * journald will no longer forward all local data to another
+ running syslog daemon. This change has been made because
+ rsyslog (which appears to be the most commonly used syslog
+ implementation these days) no longer makes use of this, and
+ instead pulls the data out of the journal on its own. Since
+ forwarding the messages to a non-existent syslog server is
+ more expensive than we assumed we have now turned this
+ off. If you run a syslog server that is not a recent rsyslog
+ version, you have to turn this option on again
+ (ForwardToSyslog= in journald.conf).
+
+ * journald now optionally supports the LZ4 compressor for
+ larger journal fields. This compressor should perform much
+ better than XZ which was the previous default.
+
+ * machinectl now shows the IP addresses of local containers,
+ if it knows them, plus the interface name of the container.
+
+ * A new tool "systemd-escape" has been added that makes it
+ easy to escape strings to build unit names and similar.
+
+ * sd_notify() messages may now include a new ERRNO= field
+ which is parsed and collected by systemd and shown among the
+ "systemctl status" output for a service.
+
+ * A new component "systemd-firstboot" has been added that
+ queries the most basic systemd information (timezone,
+ hostname, root password) interactively on first
+ boot. Alternatively it may also be used to provision these
+ things offline on OS images installed into directories.
+
+ * The default sysctl.d/ snippets will now set
+
+ net.ipv4.conf.default.promote_secondaries=1
+
+ This has the benefit of no flushing secondary IP addresses
+ when primary addresses are removed.
+
+ Contributions from: Ansgar Burchardt, Bastien Nocera, Colin
+ Walters, Dan Dedrick, Daniel Buch, Daniel Korostil, Daniel
+ Mack, Dan Williams, Dave Reisner, David Herrmann, Denis
+ Kenzior, Eelco Dolstra, Eric Cook, Hannes Reinecke, Harald
+ Hoyer, Hong Shick Pak, Hui Wang, Jean-André Santoni, Jóhann
+ B. Guðmundsson, Jon Severinsson, Karel Zak, Kay Sievers, Kevin
+ Wells, Lennart Poettering, Lukas Nykryn, Mantas Mikulėnas,
+ Marc-Antoine Perennou, Martin Pitt, Michael Biebl, Michael
+ Marineau, Michael Olbrich, Michal Schmidt, Michal Sekletar,
+ Miguel Angel Ajo, Mike Gilbert, Olivier Brunel, Robert
+ Schiele, Ronny Chevalier, Simon McVittie, Sjoerd Simons, Stef
+ Walter, Steven Noonan, Susant Sahani, Tanu Kaskinen, Thomas
+ Blume, Thomas Hindoe Paaboel Andersen, Timofey Titovets,
+ Tobias Geerinckx-Rice, Tomasz Torcz, Tom Gundersen, Umut
+ Tezduyar Lindskog, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-08-19
+
+CHANGES WITH 215:
+
+ * A new tool systemd-sysusers has been added. This tool
+ creates system users and groups in /etc/passwd and
+ /etc/group, based on static declarative system user/group
+ definitions in /usr/lib/sysusers.d/. This is useful to
+ enable factory resets and volatile systems that boot up with
+ an empty /etc directory, and thus need system users and
+ groups created during early boot. systemd now also ships
+ with two default sysusers.d/ files for the most basic
+ users and groups systemd and the core operating system
+ require.
+
+ * A new tmpfiles snippet has been added that rebuilds the
+ essential files in /etc on boot, should they be missing.
+
+ * A directive for ensuring automatic clean-up of
+ /var/cache/man/ has been removed from the default
+ configuration. This line should now be shipped by the man
+ implementation. The necessary change has been made to the
+ man-db implementation. Note that you need to update your man
+ implementation to one that ships this line, otherwise no
+ automatic clean-up of /var/cache/man will take place.
+
+ * A new condition ConditionNeedsUpdate= has been added that
+ may conditionalize services to only run when /etc or /var
+ are "older" than the vendor operating system resources in
+ /usr. This is useful for reconstructing or updating /etc
+ after an offline update of /usr or a factory reset, on the
+ next reboot. Services that want to run once after such an
+ update or reset should use this condition and order
+ themselves before the new systemd-update-done.service, which
+ will mark the two directories as fully updated. A number of
+ service files have been added making use of this, to rebuild
+ the udev hardware database, the journald message catalog and
+ dynamic loader cache (ldconfig). The systemd-sysusers tool
+ described above also makes use of this now. With this in
+ place it is now possible to start up a minimal operating
+ system with /etc empty cleanly. For more information on the
+ concepts involved see this recent blog story:
+
+ http://0pointer.de/blog/projects/stateless.html
+
+ * A new system group "input" has been introduced, and all
+ input device nodes get this group assigned. This is useful
+ for system-level software to get access to input devices. It
+ complements what is already done for "audio" and "video".
+
+ * systemd-networkd learnt minimal DHCPv4 server support in
+ addition to the existing DHCPv4 client support. It also
+ learnt DHCPv6 client and IPv6 Router Solicitation client
+ support. The DHCPv4 client gained support for static routes
+ passed in from the server. Note that the [DHCPv4] section
+ known in older systemd-networkd versions has been renamed to
+ [DHCP] and is now also used by the DHCPv6 client. Existing
+ .network files using settings of this section should be
+ updated, though compatibility is maintained. Optionally, the
+ client hostname may now be sent to the DHCP server.
+
+ * networkd gained support for vxlan virtual networks as well
+ as tun/tap and dummy devices.
+
+ * networkd gained support for automatic allocation of address
+ ranges for interfaces from a system-wide pool of
+ addresses. This is useful for dynamically managing a large
+ number of interfaces with a single network configuration
+ file. In particular this is useful to easily assign
+ appropriate IP addresses to the veth links of a large number
+ of nspawn instances.
+
+ * RPM macros for processing sysusers, sysctl and binfmt
+ drop-in snippets at package installation time have been
+ added.
+
+ * The /etc/os-release file should now be placed in
+ /usr/lib/os-release. The old location is automatically
+ created as symlink. /usr/lib is the more appropriate
+ location of this file, since it shall actually describe the
+ vendor operating system shipped in /usr, and not the
+ configuration stored in /etc.
+
+ * .mount units gained a new boolean SloppyOptions= setting
+ that maps to mount(8)'s -s option which enables permissive
+ parsing of unknown mount options.
+
+ * tmpfiles learnt a new "L+" directive which creates a symlink
+ but (unlike "L") deletes a pre-existing file first, should
+ it already exist and not already be the correct
+ symlink. Similar, "b+", "c+" and "p+" directives have been
+ added as well, which create block and character devices, as
+ well as fifos in the filesystem, possibly removing any
+ pre-existing files of different types.
+
+ * For tmpfiles' "L", "L+", "C" and "C+" directives the final
+ 'argument' field (which so far specified the source to
+ symlink/copy the files from) is now optional. If omitted the
+ same file os copied from /usr/share/factory/ suffixed by the
+ full destination path. This is useful for populating /etc
+ with essential files, by copying them from vendor defaults
+ shipped in /usr/share/factory/etc.
+
+ * A new command "systemctl preset-all" has been added that
+ applies the service preset settings to all installed unit
+ files. A new switch --preset-mode= has been added that
+ controls whether only enable or only disable operations
+ shall be executed.
+
+ * A new command "systemctl is-system-running" has been added
+ that allows checking the overall state of the system, for
+ example whether it is fully up and running.
+
+ * When the system boots up with an empty /etc, the equivalent
+ to "systemctl preset-all" is executed during early boot, to
+ make sure all default services are enabled after a factory
+ reset.
+
+ * systemd now contains a minimal preset file that enables the
+ most basic services systemd ships by default.
+
+ * Unit files' [Install] section gained a new DefaultInstance=
+ field for defining the default instance to create if a
+ template unit is enabled with no instance specified.
+
+ * A new passive target cryptsetup-pre.target has been added
+ that may be used by services that need to make they run and
+ finish before the first LUKS cryptographic device is set up.
+
+ * The /dev/loop-control and /dev/btrfs-control device nodes
+ are now owned by the "disk" group by default, opening up
+ access to this group.
+
+ * systemd-coredump will now automatically generate a
+ stack trace of all core dumps taking place on the system,
+ based on elfutils' libdw library. This stack trace is logged
+ to the journal.
+
+ * systemd-coredump may now optionally store coredumps directly
+ on disk (in /var/lib/systemd/coredump, possibly compressed),
+ instead of storing them unconditionally in the journal. This
+ mode is the new default. A new configuration file
+ /etc/systemd/coredump.conf has been added to configure this
+ and other parameters of systemd-coredump.
+
+ * coredumpctl gained a new "info" verb to show details about a
+ specific coredump. A new switch "-1" has also been added
+ that makes sure to only show information about the most
+ recent entry instead of all entries. Also, as the tool is
+ generally useful now the "systemd-" prefix of the binary
+ name has been removed. Distributions that want to maintain
+ compatibility with the old name should add a symlink from
+ the old name to the new name.
+
+ * journald's SplitMode= now defaults to "uid". This makes sure
+ that unprivileged users can access their own coredumps with
+ coredumpctl without restrictions.
+
+ * New kernel command line options "systemd.wants=" (for
+ pulling an additional unit during boot), "systemd.mask="
+ (for masking a specific unit for the boot), and
+ "systemd.debug-shell" (for enabling the debug shell on tty9)
+ have been added. This is implemented in the new generator
+ "systemd-debug-generator".
+
+ * systemd-nspawn will now by default filter a couple of
+ syscalls for containers, among them those required for
+ kernel module loading, direct x86 IO port access, swap
+ management, and kexec. Most importantly though
+ open_by_handle_at() is now prohibited for containers,
+ closing a hole similar to a recently discussed vulnerability
+ in docker regarding access to files on file hierarchies the
+ container should normally not have access to. Note that for
+ nspawn we generally make no security claims anyway (and
+ this is explicitly documented in the man page), so this is
+ just a fix for one of the most obvious problems.
+
+ * A new man page file-hierarchy(7) has been added that
+ contains a minimized, modernized version of the file system
+ layout systemd expects, similar in style to the FHS
+ specification or hier(5). A new tool systemd-path(1) has
+ been added to query many of these paths for the local
+ machine and user.
+
+ * Automatic time-based clean-up of $XDG_RUNTIME_DIR is no
+ longer done. Since the directory now has a per-user size
+ limit, and is cleaned on logout this appears unnecessary,
+ in particular since this now brings the lifecycle of this
+ directory closer in line with how IPC objects are handled.
+
+ * systemd.pc now exports a number of additional directories,
+ including $libdir (which is useful to identify the library
+ path for the primary architecture of the system), and a
+ couple of drop-in directories.
+
+ * udev's predictable network interface names now use the dev_port
+ sysfs attribute, introduced in linux 3.15 instead of dev_id to
+ distinguish between ports of the same PCI function. dev_id should
+ only be used for ports using the same HW address, hence the need
+ for dev_port.
+
+ * machined has been updated to export the OS version of a
+ container (read from /etc/os-release and
+ /usr/lib/os-release) on the bus. This is now shown in
+ "machinectl status" for a machine.
+
+ * A new service setting RestartForceExitStatus= has been
+ added. If configured to a set of exit signals or process
+ return values, the service will be restarted when the main
+ daemon process exits with any of them, regardless of the
+ Restart= setting.
+
+ * systemctl's -H switch for connecting to remote systemd
+ machines has been extended so that it may be used to
+ directly connect to a specific container on the
+ host. "systemctl -H root@foobar:waldi" will now connect as
+ user "root" to host "foobar", and then proceed directly to
+ the container named "waldi". Note that currently you have to
+ authenticate as user "root" for this to work, as entering
+ containers is a privileged operation.
+
+ Contributions from: Andreas Henriksson, Benjamin Steinwender,
+ Carl Schaefer, Christian Hesse, Colin Ian King, Cristian
+ Rodríguez, Daniel Mack, Dave Reisner, David Herrmann, Eugene
+ Yakubovich, Filipe Brandenburger, Frederic Crozat, Hristo
+ Venev, Jan Engelhardt, Jonathan Boulle, Kay Sievers, Lennart
+ Poettering, Luke Shumaker, Mantas Mikulėnas, Marc-Antoine
+ Perennou, Marcel Holtmann, Michael Marineau, Michael Olbrich,
+ Michał Bartoszkiewicz, Michal Sekletar, Patrik Flykt, Ronan Le
+ Martret, Ronny Chevalier, Ruediger Oertel, Steven Noonan,
+ Susant Sahani, Thadeu Lima de Souza Cascardo, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Tom Hirst, Umut Tezduyar
+ Lindskog, Uoti Urpala, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-07-03
+
+CHANGES WITH 214:
+
+ * As an experimental feature, udev now tries to lock the
+ disk device node (flock(LOCK_SH|LOCK_NB)) while it
+ executes events for the disk or any of its partitions.
+ Applications like partitioning programs can lock the
+ disk device node (flock(LOCK_EX)) and claim temporary
+ device ownership that way; udev will entirely skip all event
+ handling for this disk and its partitions. If the disk
+ was opened for writing, the close will trigger a partition
+ table rescan in udev's "watch" facility, and if needed
+ synthesize "change" events for the disk and all its partitions.
+ This is now unconditionally enabled, and if it turns out to
+ cause major problems, we might turn it on only for specific
+ devices, or might need to disable it entirely. Device Mapper
+ devices are excluded from this logic.
+
+ * We temporarily dropped the "-l" switch for fsck invocations,
+ since they collide with the flock() logic above. util-linux
+ upstream has been changed already to avoid this conflict,
+ and we will readd "-l" as soon as util-linux with this
+ change has been released.
+
+ * The dependency on libattr has been removed. Since a long
+ time, the extended attribute calls have moved to glibc, and
+ libattr is thus unnecessary.
+
+ * Virtualization detection works without priviliges now. This
+ means the systemd-detect-virt binary no longer requires
+ CAP_SYS_PTRACE file capabilities, and our daemons can run
+ with fewer privileges.
+
+ * systemd-networkd now runs under its own "systemd-network"
+ user. It retains the CAP_NET_ADMIN, CAP_NET_BIND_SERVICE,
+ CAP_NET_BROADCAST, CAP_NET_RAW capabilities though, but
+ loses the ability to write to files owned by root this way.
+
+ * Similar, systemd-resolved now runs under its own
+ "systemd-resolve" user with no capabilities remaining.
+
+ * Similar, systemd-bus-proxyd now runs under its own
+ "systemd-bus-proxy" user with only CAP_IPC_OWNER remaining.
+
+ * systemd-networkd gained support for setting up "veth"
+ virtual ethernet devices for container connectivity, as well
+ as GRE and VTI tunnels.
+
+ * systemd-networkd will no longer automatically attempt to
+ manually load kernel modules necessary for certain tunnel
+ transports. Instead, it is assumed the kernel loads them
+ automatically when required. This only works correctly on
+ very new kernels. On older kernels, please consider adding
+ the kernel modules to /etc/modules-load.d/ as a work-around.
+
+ * The resolv.conf file systemd-resolved generates has been
+ moved to /run/systemd/resolve/. If you have a symlink from
+ /etc/resolv.conf, it might be necessary to correct it.
+
+ * Two new service settings, ProtectHome= and ProtectSystem=,
+ have been added. When enabled, they will make the user data
+ (such as /home) inaccessible or read-only and the system
+ (such as /usr) read-only, for specific services. This allows
+ very light-weight per-service sandboxing to avoid
+ modifications of user data or system files from
+ services. These two new switches have been enabled for all
+ of systemd's long-running services, where appropriate.
+
+ * Socket units gained new SocketUser= and SocketGroup=
+ settings to set the owner user and group of AF_UNIX sockets
+ and FIFOs in the file system.
+
+ * Socket units gained a new RemoveOnStop= setting. If enabled,
+ all FIFOS and sockets in the file system will be removed
+ when the specific socket unit is stopped.
+
+ * Socket units gained a new Symlinks= setting. It takes a list
+ of symlinks to create to file system sockets or FIFOs
+ created by the specific Unix sockets. This is useful to
+ manage symlinks to socket nodes with the same life-cycle as
+ the socket itself.
+
+ * The /dev/log socket and /dev/initctl FIFO have been moved to
+ /run, and have been replaced by symlinks. This allows
+ connecting to these facilities even if PrivateDevices=yes is
+ used for a service (which makes /dev/log itself unavailable,
+ but /run is left). This also has the benefit of ensuring
+ that /dev only contains device nodes, directories and
+ symlinks, and nothing else.
+
+ * sd-daemon gained two new calls sd_pid_notify() and
+ sd_pid_notifyf(). They are similar to sd_notify() and
+ sd_notifyf(), but allow overriding of the source PID of
+ notification messages if permissions permit this. This is
+ useful to send notify messages on behalf of a different
+ process (for example, the parent process). The
+ systemd-notify tool has been updated to make use of this
+ when sending messages (so that notification messages now
+ originate from the shell script invoking systemd-notify and
+ not the systemd-notify process itself. This should minimize
+ a race where systemd fails to associate notification
+ messages to services when the originating process already
+ vanished.
+
+ * A new "on-abnormal" setting for Restart= has been added. If
+ set, it will result in automatic restarts on all "abnormal"
+ reasons for a process to exit, which includes unclean
+ signals, core dumps, timeouts and watchdog timeouts, but
+ does not include clean and unclean exit codes or clean
+ signals. Restart=on-abnormal is an alternative for
+ Restart=on-failure for services that shall be able to
+ terminate and avoid restarts on certain errors, by
+ indicating so with an unclean exit code. Restart=on-failure
+ or Restart=on-abnormal is now the recommended setting for
+ all long-running services.
+
+ * If the InaccessibleDirectories= service setting points to a
+ mount point (or if there are any submounts contained within
+ it), it is now attempted to completely unmount it, to make
+ the file systems truly unavailable for the respective
+ service.
+
+ * The ReadOnlyDirectories= service setting and
+ systemd-nspawn's --read-only parameter are now recursively
+ applied to all submounts, too.
+
+ * Mount units may now be created transiently via the bus APIs.
+
+ * The support for SysV and LSB init scripts has been removed
+ from the systemd daemon itself. Instead, it is now
+ implemented as a generator that creates native systemd units
+ from these scripts when needed. This enables us to remove a
+ substantial amount of legacy code from PID 1, following the
+ fact that many distributions only ship a very small number
+ of LSB/SysV init scripts nowadays.
+
+ * Priviliged Xen (dom0) domains are not considered
+ virtualization anymore by the virtualization detection
+ logic. After all, they generally have unrestricted access to
+ the hardware and usually are used to manage the unprivileged
+ (domU) domains.
+
+ * systemd-tmpfiles gained a new "C" line type, for copying
+ files or entire directories.
+
+ * systemd-tmpfiles "m" lines are now fully equivalent to "z"
+ lines. So far, they have been non-globbing versions of the
+ latter, and have thus been redundant. In future, it is
+ recommended to only use "z". "m" has hence been removed
+ from the documentation, even though it stays supported.
+
+ * A tmpfiles snippet to recreate the most basic structure in
+ /var has been added. This is enough to create the /var/run →
+ /run symlink and create a couple of structural
+ directories. This allows systems to boot up with an empty or
+ volatile /var. Of course, while with this change, the core OS
+ now is capable with dealing with a volatile /var, not all
+ user services are ready for it. However, we hope that sooner
+ or later, many service daemons will be changed upstream so
+ that they are able to automatically create their necessary
+ directories in /var at boot, should they be missing. This is
+ the first step to allow state-less systems that only require
+ the vendor image for /usr to boot.
+
+ * systemd-nspawn has gained a new --tmpfs= switch to mount an
+ empty tmpfs instance to a specific directory. This is
+ particularly useful for making use of the automatic
+ reconstruction of /var (see above), by passing --tmpfs=/var.
+
+ * Access modes specified in tmpfiles snippets may now be
+ prefixed with "~", which indicates that they shall be masked
+ by whether the existing file or directory is currently
+ writable, readable or executable at all. Also, if specified,
+ the sgid/suid/sticky bits will be masked for all
+ non-directories.
+
+ * A new passive target unit "network-pre.target" has been
+ added which is useful for services that shall run before any
+ network is configured, for example firewall scripts.
+
+ * The "floppy" group that previously owned the /dev/fd*
+ devices is no longer used. The "disk" group is now used
+ instead. Distributions should probably deprecate usage of
+ this group.
+
+ Contributions from: Camilo Aguilar, Christian Hesse, Colin Ian
+ King, Cristian Rodríguez, Daniel Buch, Dave Reisner, David
+ Strauss, Denis Tikhomirov, John, Jonathan Liu, Kay Sievers,
+ Lennart Poettering, Mantas Mikulėnas, Mark Eichin, Ronny
+ Chevalier, Susant Sahani, Thomas Blume, Thomas Hindoe Paaboel
+ Andersen, Tom Gundersen, Umut Tezduyar Lindskog, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Berlin, 2014-06-11
+
+CHANGES WITH 213:
+
+ * A new "systemd-timesyncd" daemon has been added for
+ synchronizing the system clock across the network. It
+ implements an SNTP client. In contrast to NTP
+ implementations such as chrony or the NTP reference server,
+ this only implements a client side, and does not bother with
+ the full NTP complexity, focusing only on querying time from
+ one remote server and synchronizing the local clock to
+ it. Unless you intend to serve NTP to networked clients or
+ want to connect to local hardware clocks, this simple NTP
+ client should be more than appropriate for most
+ installations. The daemon runs with minimal privileges, and
+ has been hooked up with networkd to only operate when
+ network connectivity is available. The daemon saves the
+ current clock to disk every time a new NTP sync has been
+ acquired, and uses this to possibly correct the system clock
+ early at bootup, in order to accommodate for systems that
+ lack an RTC such as the Raspberry Pi and embedded devices,
+ and to make sure that time monotonically progresses on these
+ systems, even if it is not always correct. To make use of
+ this daemon, a new system user and group "systemd-timesync"
+ needs to be created on installation of systemd.
+
+ * The queue "seqnum" interface of libudev has been disabled, as
+ it was generally incompatible with device namespacing as
+ sequence numbers of devices go "missing" if the devices are
+ part of a different namespace.
+
+ * "systemctl list-timers" and "systemctl list-sockets" gained
+ a --recursive switch for showing units of these types also
+ for all local containers, similar in style to the already
+ supported --recursive switch for "systemctl list-units".
+
+ * A new RebootArgument= setting has been added for service
+ units, which may be used to specify a kernel reboot argument
+ to use when triggering reboots with StartLimitAction=.
+
+ * A new FailureAction= setting has been added for service
+ units which may be used to specify an operation to trigger
+ when a service fails. This works similarly to
+ StartLimitAction=, but unlike it, controls what is done
+ immediately rather than only after several attempts to
+ restart the service in question.
+
+ * hostnamed got updated to also expose the kernel name,
+ release, and version on the bus. This is useful for
+ executing commands like hostnamectl with the -H switch.
+ systemd-analyze makes use of this to properly display
+ details when running non-locally.
+
+ * The bootchart tool can now show cgroup information in the
+ graphs it generates.
+
+ * The CFS CPU quota cgroup attribute is now exposed for
+ services. The new CPUQuota= switch has been added for this
+ which takes a percentage value. Setting this will have the
+ result that a service may never get more CPU time than the
+ specified percentage, even if the machine is otherwise idle.
+
+ * systemd-networkd learned IPIP and SIT tunnel support.
+
+ * LSB init scripts exposing a dependency on $network will now
+ get a dependency on network-online.target rather than simply
+ network.target. This should bring LSB handling closer to
+ what it was on SysV systems.
+
+ * A new fsck.repair= kernel option has been added to control
+ how fsck shall deal with unclean file systems at boot.
+
+ * The (.ini) configuration file parser will now silently
+ ignore sections whose name begins with "X-". This may be
+ used to maintain application-specific extension sections in unit
+ files.
+
+ * machined gained a new API to query the IP addresses of
+ registered containers. "machinectl status" has been updated
+ to show these addresses in its output.
+
+ * A new call sd_uid_get_display() has been added to the
+ sd-login APIs for querying the "primary" session of a
+ user. The "primary" session of the user is elected from the
+ user's sessions and generally a graphical session is
+ preferred over a text one.
+
+ * A minimal systemd-resolved daemon has been added. It
+ currently simply acts as a companion to systemd-networkd and
+ manages resolv.conf based on per-interface DNS
+ configuration, possibly supplied via DHCP. In the long run
+ we hope to extend this into a local DNSSEC enabled DNS and
+ mDNS cache.
+
+ * The systemd-networkd-wait-online tool is now enabled by
+ default. It will delay network-online.target until a network
+ connection has been configured. The tool primarily integrates
+ with networkd, but will also make a best effort to make sense
+ of network configuration performed in some other way.
+
+ * Two new service options StartupCPUShares= and
+ StartupBlockIOWeight= have been added that work similarly to
+ CPUShares= and BlockIOWeight= however only apply during
+ system startup. This is useful to prioritize certain services
+ differently during bootup than during normal runtime.
+
+ * hostnamed has been changed to prefer the statically
+ configured hostname in /etc/hostname (unless set to
+ 'localhost' or empty) over any dynamic one supplied by
+ dhcp. With this change, the rules for picking the hostname
+ match more closely the rules of other configuration settings
+ where the local administrator's configuration in /etc always
+ overrides any other settings.
+
+ Contributions fron: Ali H. Caliskan, Alison Chaiken, Bas van
+ den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
+ Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
+ David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
+ Dolstra, Evan Nemerson, Florian Albrechtskirchinger, Greg
+ Kroah-Hartman, Harald Hoyer, Holger Hans Peter Freyther, Jan
+ Engelhardt, Jani Nikula, Jason St. John, Jeffrey Clark,
+ Jonathan Boulle, Kay Sievers, Lennart Poettering, Lukas
+ Nykryn, Lukasz Skalski, Łukasz Stelmach, Mantas Mikulėnas,
+ Marcel Holtmann, Martin Pitt, Matthew Monaco, Michael
+ Marineau, Michael Olbrich, Michal Sekletar, Mike Gilbert, Nis
+ Martensen, Patrik Flykt, Philip Lorenz, poma, Ray Strode,
+ Reyad Attiyat, Robert Milasan, Scott Thrasher, Stef Walter,
+ Steven Siloti, Susant Sahani, Tanu Kaskinen, Thomas Bächler,
+ Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut Tezduyar
+ Lindskog, WaLyong Cho, Will Woods, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Beijing, 2014-05-28
+
+CHANGES WITH 212:
+
+ * When restoring the screen brightness at boot, stay away from
+ the darkest setting or from the lowest 5% of the available
+ range, depending on which is the larger value of both. This
+ should effectively protect the user from rebooting into a
+ black screen, should the brightness have been set to minimum
+ by accident.
+
+ * sd-login gained a new sd_machine_get_class() call to
+ determine the class ("vm" or "container") of a machine
+ registered with machined.
+
+ * sd-login gained new calls
+ sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
+ to query the identity of the peer of a local AF_UNIX
+ connection. They operate similarly to their sd_pid_get_xyz()
+ counterparts.
+
+ * PID 1 will now maintain a system-wide system state engine
+ with the states "starting", "running", "degraded",
+ "maintenance", "stopping". These states are bound to system
+ startup, normal runtime, runtime with at least one failed
+ service, rescue/emergency mode and system shutdown. This
+ state is shown in the "systemctl status" output when no unit
+ name is passed. It is useful to determine system state, in
+ particularly when doing so for many systems or containers at
+ once.
+
+ * A new command "list-machines" has been added to "systemctl"
+ that lists all local OS containers and shows their system
+ state (see above), if systemd runs inside of them.
+
+ * systemctl gained a new "-r" switch to recursively enumerate
+ units on all local containers, when used with the
+ "list-unit" command (which is the default one that is
+ executed when no parameters are specified).
+
+ * The GPT automatic partition discovery logic will now honour
+ two GPT partition flags: one may be set on a partition to
+ cause it to be mounted read-only, and the other may be set
+ on a partition to ignore it during automatic discovery.
+
+ * Two new GPT type UUIDs have been added for automatic root
+ partition discovery, for 32-bit and 64-bit ARM. This is not
+ particularly useful for discovering the root directory on
+ these architectures during bare-metal boots (since UEFI is
+ not common there), but still very useful to allow booting of
+ ARM disk images in nspawn with the -i option.
+
+ * MAC addresses of interfaces created with nspawn's
+ --network-interface= switch will now be generated from the
+ machine name, and thus be stable between multiple invocations
+ of the container.
+
+ * logind will now automatically remove all IPC objects owned
+ by a user if she or he fully logs out. This makes sure that
+ users who are logged out cannot continue to consume IPC
+ resources. This covers SysV memory, semaphores and message
+ queues as well as POSIX shared memory and message
+ queues. Traditionally, SysV and POSIX IPC had no life-cycle
+ limits. With this functionality, that is corrected. This may
+ be turned off by using the RemoveIPC= switch of logind.conf.
+
+ * The systemd-machine-id-setup and tmpfiles tools gained a
+ --root= switch to operate on a specific root directory,
+ instead of /.
+
+ * journald can now forward logged messages to the TTYs of all
+ logged in users ("wall"). This is the default for all
+ emergency messages now.
+
+ * A new tool systemd-journal-remote has been added to stream
+ journal log messages across the network.
+
+ * /sys/fs/cgroup/ is now mounted read-only after all cgroup
+ controller trees are mounted into it. Note that the
+ directories mounted beneath it are not read-only. This is a
+ security measure and is particularly useful because glibc
+ actually includes a search logic to pick any tmpfs it can
+ find to implement shm_open() if /dev/shm is not available
+ (which it might very well be in namespaced setups).
+
+ * machinectl gained a new "poweroff" command to cleanly power
+ down a local OS container.
+
+ * The PrivateDevices= unit file setting will now also drop the
+ CAP_MKNOD capability from the capability bound set, and
+ imply DevicePolicy=closed.
+
+ * PrivateDevices=, PrivateNetwork= and PrivateTmp= is now used
+ comprehensively on all long-running systemd services where
+ this is appropriate.
+
+ * systemd-udevd will now run in a disassociated mount
+ namespace. To mount directories from udev rules, make sure to
+ pull in mount units via SYSTEMD_WANTS properties.
+
+ * The kdbus support gained support for uploading policy into
+ the kernel. sd-bus gained support for creating "monitoring"
+ connections that can eavesdrop into all bus communication
+ for debugging purposes.
+
+ * Timestamps may now be specified in seconds since the UNIX
+ epoch Jan 1st, 1970 by specifying "@" followed by the value
+ in seconds.
+
+ * Native tcpwrap support in systemd has been removed. tcpwrap
+ is old code, not really maintained anymore and has serious
+ shortcomings, and better options such as firewalls
+ exist. For setups that require tcpwrap usage, please
+ consider invoking your socket-activated service via tcpd,
+ like on traditional inetd.
+
+ * A new system.conf configuration option
+ DefaultTimerAccuracySec= has been added that controls the
+ default AccuracySec= setting of .timer units.
+
+ * Timer units gained a new WakeSystem= switch. If enabled,
+ timers configured this way will cause the system to resume
+ from system suspend (if the system supports that, which most
+ do these days).
+
+ * Timer units gained a new Persistent= switch. If enabled,
+ timers configured this way will save to disk when they have
+ been last triggered. This information is then used on next
+ reboot to possible execute overdue timer events, that
+ could not take place because the system was powered off.
+ This enables simple anacron-like behaviour for timer units.
+
+ * systemctl's "list-timers" will now also list the time a
+ timer unit was last triggered in addition to the next time
+ it will be triggered.
+
+ * systemd-networkd will now assign predictable IPv4LL
+ addresses to its local interfaces.
+
+ Contributions from: Brandon Philips, Daniel Buch, Daniel Mack,
+ Dave Reisner, David Herrmann, Gerd Hoffmann, Greg
+ Kroah-Hartman, Hendrik Brueckner, Jason St. John, Josh
+ Triplett, Kay Sievers, Lennart Poettering, Marc-Antoine
+ Perennou, Michael Marineau, Michael Olbrich, Miklos Vajna,
+ Patrik Flykt, poma, Sebastian Thorarensen, Thomas Bächler,
+ Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom Gundersen,
+ Umut Tezduyar Lindskog, Wieland Hoffmann, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Berlin, 2014-03-25
+
+CHANGES WITH 211:
+
+ * A new unit file setting RestrictAddressFamilies= has been
+ added to restrict which socket address families unit
+ processes gain access to. This takes address family names
+ like "AF_INET" or "AF_UNIX", and is useful to minimize the
+ attack surface of services via exotic protocol stacks. This
+ is built on seccomp system call filters.
+
+ * Two new unit file settings RuntimeDirectory= and
+ RuntimeDirectoryMode= have been added that may be used to
+ manage a per-daemon runtime directories below /run. This is
+ an alternative for setting up directory permissions with
+ tmpfiles snippets, and has the advantage that the runtime
+ directory's lifetime is bound to the daemon runtime and that
+ the daemon starts up with an empty directory each time. This
+ is particularly useful when writing services that drop
+ privileges using the User= or Group= setting.
+
+ * The DeviceAllow= unit setting now supports globbing for
+ matching against device group names.
+
+ * The systemd configuration file system.conf gained new
+ settings DefaultCPUAccounting=, DefaultBlockIOAccounting=,
+ DefaultMemoryAccounting= to globally turn on/off accounting
+ for specific resources (cgroups) for all units. These
+ settings may still be overridden individually in each unit
+ though.
+
+ * systemd-gpt-auto-generator is now able to discover /srv and
+ root partitions in addition to /home and swap partitions. It
+ also supports LUKS-encrypted partitions now. With this in
+ place, automatic discovery of partitions to mount following
+ the Discoverable Partitions Specification
+ (http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec)
+ is now a lot more complete. This allows booting without
+ /etc/fstab and without root= on the kernel command line on
+ systems prepared appropriately.
+
+ * systemd-nspawn gained a new --image= switch which allows
+ booting up disk images and Linux installations on any block
+ device that follow the Discoverable Partitions Specification
+ (see above). This means that installations made with
+ appropriately updated installers may now be started and
+ deployed using container managers, completely
+ unmodified. (We hope that libvirt-lxc will add support for
+ this feature soon, too.)
+
+ * systemd-nspawn gained a new --network-macvlan= setting to
+ set up a private macvlan interface for the
+ container. Similarly, systemd-networkd gained a new
+ Kind=macvlan setting in .netdev files.
+
+ * systemd-networkd now supports configuring local addresses
+ using IPv4LL.
+
+ * A new tool systemd-network-wait-online has been added to
+ synchronously wait for network connectivity using
+ systemd-networkd.
+
+ * The sd-bus.h bus API gained a new sd_bus_track object for
+ tracking the life-cycle of bus peers. Note that sd-bus.h is
+ still not a public API though (unless you specify
+ --enable-kdbus on the configure command line, which however
+ voids your warranty and you get no API stability guarantee).
+
+ * The $XDG_RUNTIME_DIR runtime directories for each user are
+ now individual tmpfs instances, which has the benefit of
+ introducing separate pools for each user, with individual
+ size limits, and thus making sure that unprivileged clients
+ can no longer negatively impact the system or other users by
+ filling up their $XDG_RUNTIME_DIR. A new logind.conf setting
+ RuntimeDirectorySize= has been introduced that allows
+ controlling the default size limit for all users. It
+ defaults to 10% of the available physical memory. This is no
+ replacement for quotas on tmpfs though (which the kernel
+ still does not support), as /dev/shm and /tmp are still
+ shared resources used by both the system and unprivileged
+ users.
+
+ * logind will now automatically turn off automatic suspending
+ on laptop lid close when more than one display is
+ connected. This was previously expected to be implemented
+ individually in desktop environments (such as GNOME),
+ however has been added to logind now, in order to fix a
+ boot-time race where a desktop environment might not have
+ been started yet and thus not been able to take an inhibitor
+ lock at the time where logind already suspends the system
+ due to a closed lid.
+
+ * logind will now wait at least 30s after each system
+ suspend/resume cycle, and 3min after system boot before
+ suspending the system due to a closed laptop lid. This
+ should give USB docking stations and similar enough time to
+ be probed and configured after system resume and boot in
+ order to then act as suspend blocker.
+
+ * systemd-run gained a new --property= setting which allows
+ initialization of resource control properties (and others)
+ for the created scope or service unit. Example: "systemd-run
+ --property=BlockIOWeight=10 updatedb" may be used to run
+ updatedb at a low block IO scheduling weight.
+
+ * systemd-run's --uid=, --gid=, --setenv=, --setenv= switches
+ now also work in --scope mode.
+
+ * When systemd is compiled with kdbus support, basic support
+ for enforced policies is now in place. (Note that enabling
+ kdbus still voids your warranty and no API compatibility
+ promises are made.)
+
+ Contributions from: Andrey Borzenkov, Ansgar Burchardt, Armin
+ K., Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
+ Harald Hoyer, Henrik Grindal Bakken, Jasper St. Pierre, Kay
+ Sievers, Kieran Clancy, Lennart Poettering, Lukas Nykryn,
+ Mantas Mikulėnas, Marcel Holtmann, Mark Oteiza, Martin Pitt,
+ Mike Gilbert, Peter Rajnoha, poma, Samuli Suominen, Stef
+ Walter, Susant Sahani, Tero Roponen, Thomas Andersen, Thomas
+ Bächler, Thomas Hindoe Paaboel Andersen, Tomasz Torcz, Tom
+ Gundersen, Umut Tezduyar Lindskog, Uoti Urpala, Zachary Cook,
+ Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-03-12
+
+CHANGES WITH 210:
+
+ * systemd will now relabel /dev after loading the SMACK policy
+ according to SMACK rules.
+
+ * A new unit file option AppArmorProfile= has been added to
+ set the AppArmor profile for the processes of a unit.
+
+ * A new condition check ConditionArchitecture= has been added
+ to conditionalize units based on the system architecture, as
+ reported by uname()'s "machine" field.
+
+ * systemd-networkd now supports matching on the system
+ virtualization, architecture, kernel command line, host name
+ and machine ID.
+
+ * logind is now a lot more aggressive when suspending the
+ machine due to a closed laptop lid. Instead of acting only
+ on the lid close action, it will continuously watch the lid
+ status and act on it. This is useful for laptops where the
+ power button is on the outside of the chassis so that it can
+ be reached without opening the lid (such as the Lenovo
+ Yoga). On those machines, logind will now immediately
+ re-suspend the machine if the power button has been
+ accidentally pressed while the laptop was suspended and in a
+ backpack or similar.
+
+ * logind will now watch SW_DOCK switches and inhibit reaction
+ to the lid switch if it is pressed. This means that logind
+ will not suspend the machine anymore if the lid is closed
+ and the system is docked, if the laptop supports SW_DOCK
+ notifications via the input layer. Note that ACPI docking
+ stations do not generate this currently. Also note that this
+ logic is usually not fully sufficient and Desktop
+ Environments should take a lid switch inhibitor lock when an
+ external display is connected, as systemd will not watch
+ this on its own.
+
+ * nspawn will now make use of the devices cgroup controller by
+ default, and only permit creation of and access to the usual
+ API device nodes like /dev/null or /dev/random, as well as
+ access to (but not creation of) the pty devices.
+
+ * We will now ship a default .network file for
+ systemd-networkd that automatically configures DHCP for
+ network interfaces created by nspawn's --network-veth or
+ --network-bridge= switches.
+
+ * systemd will now understand the usual M, K, G, T suffixes
+ according to SI conventions (i.e. to the base 1000) when
+ referring to throughput and hardware metrics. It will stay
+ with IEC conventions (i.e. to the base 1024) for software
+ metrics, according to what is customary according to
+ Wikipedia. We explicitly document which base applies for
+ each configuration option.
+
+ * The DeviceAllow= setting in unit files now supports a syntax
+ to whitelist an entire group of devices node majors at once,
+ based on the /proc/devices listing. For example, with the
+ string "char-pts", it is now possible to whitelist all
+ current and future pseudo-TTYs at once.
+
+ * sd-event learned a new "post" event source. Event sources of
+ this type are triggered by the dispatching of any event
+ source of a type that is not "post". This is useful for
+ implementing clean-up and check event sources that are
+ triggered by other work being done in the program.
+
+ * systemd-networkd is no longer statically enabled, but uses
+ the usual [Install] sections so that it can be
+ enabled/disabled using systemctl. It still is enabled by
+ default however.
+
+ * When creating a veth interface pair with systemd-nspawn, the
+ host side will now be prefixed with "vb-" if
+ --network-bridge= is used, and with "ve-" if --network-veth
+ is used. This way, it is easy to distinguish these cases on
+ the host, for example to apply different configuration to
+ them with systemd-networkd.
+
+ * The compatibility libraries for libsystemd-journal.so,
+ libsystem-id128.so, libsystemd-login.so and
+ libsystemd-daemon.so do not make use of IFUNC
+ anymore. Instead, we now build libsystemd.so multiple times
+ under these alternative names. This means that the footprint
+ is drastically increased, but given that these are
+ transitional compatibility libraries, this should not matter
+ much. This change has been made necessary to support the ARM
+ platform for these compatibility libraries, as the ARM
+ toolchain is not really at the same level as the toolchain
+ for other architectures like x86 and does not support
+ IFUNC. Please make sure to use --enable-compat-libs only
+ during a transitional period!
+
+ Contributions from: Andreas Fuchs, Armin K., Colin Walters,
+ Daniel Mack, Dave Reisner, David Herrmann, Djalal Harouni,
+ Holger Schurig, Jason A. Donenfeld, Jason St. John, Jasper
+ St. Pierre, Kay Sievers, Lennart Poettering, Łukasz Stelmach,
+ Marcel Holtmann, Michael Scherer, Michal Sekletar, Mike
+ Gilbert, Samuli Suominen, Thomas Bächler, Thomas Hindoe
+ Paaboel Andersen, Tom Gundersen, Umut Tezduyar Lindskog,
+ Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-02-24
+
CHANGES WITH 209:
* A new component "systemd-networkd" has been added that can
MTU, duplex settings, Wake-on-LAN settings, MAC address, MAC
address assignment policy (randomized, ...).
+ * The configuration of network interface naming rules for
+ "permanent interface names" has changed: a new NamePolicy=
+ setting in the [Link] section of .link files determines the
+ priority of possible naming schemes (onboard, slot, mac,
+ path). The default value of this setting is determined by
+ /usr/lib/net/links/99-default.link. Old
+ 80-net-name-slot.rules udev configuration file has been
+ removed, so local configuration overriding this file should
+ be adapated to override 99-default.link instead.
+
* When the User= switch is used in a unit file, also
initialize $SHELL= based on the user database entry.
merged them into a single library, libsystemd.so, which
provides all symbols. The reason for this is cyclic
dependencies, as these libraries tend to use each other's
- symbols. So far, we've managed to workaround that by linking
+ symbols. So far, we have managed to workaround that by linking
a copy of a good part of our code into each of these
libraries again and again, which, however, makes certain
things hard to do, like sharing static variables. Also, it
one of the next releases, at the same time that we will
declare the APIs stable.
- * When the kernel command-line argument "kdbus" is specified,
+ * When the kernel command line argument "kdbus" is specified,
systemd will automatically load the kdbus.ko kernel module. At
this stage of development, it is only useful for testing kdbus
and should not be used in production. Note: if "--enable-kdbus"
* systemd-nspawn gained a new --personality= switch for
setting the kernel personality for the container. This is
- useful when running a 32bit container on a 64bit host. A
- similar option Personality= is now also available in service
- units.
+ useful when running a 32-bit container on a 64-bit host. A
+ similar option Personality= is now also available for service
+ units to use.
* logind will now also track a "Desktop" identifier for each
session which encodes the desktop environment of it. This is
* For usage together with SystemCallFilter=, a new
SystemCallErrorNumber= setting has been introduced that
- allows configuration of a system error number to return on
- filtered system calls, instead of immediately killing the
+ allows configuration of a system error number to be returned
+ on filtered system calls, instead of immediately killing the
process. Also, SystemCallArchitectures= has been added to
limit access to system calls of a particular architecture
(in order to turn off support for unused secondary
SystemCallArchitectures= setting in system.conf now to turn
off support for non-native system calls system-wide.
+ * systemd requires a kernel with a working name_to_handle_at(),
+ please see the kernel config requirements in the README file.
+
Contributions from: Adam Williamson, Alex Jia, Anatol Pomozov,
Ansgar Burchardt, AppleBloom, Auke Kok, Bastien Nocera,
Chengwei Yang, Christian Seiler, Colin Guthrie, Colin Walters,
kernel, and on seats that are not seat0.
* A new kernel command line option luks.options= is understood
- now which allows specifiying LUKS options for usage for LUKS
+ now which allows specifying LUKS options for usage for LUKS
encrypted partitions specified with luks.uuid=.
* tmpfiles.d(5) snippets may now use specifier expansion in
* A new tmpfiles.d(5) command "m" has been introduced which
may be used to change the owner/group/access mode of a file
- or directory if it exists, but do nothing if it doesn't.
+ or directory if it exists, but do nothing if it does not.
* This release removes high-level support for the
MemorySoftLimit= cgroup setting. The underlying kernel
cgroup attribute memory.soft_limit= is currently badly
designed and likely to be removed from the kernel API in its
- current form, hence we shouldn't expose it for now.
+ current form, hence we should not expose it for now.
* The memory.use_hierarchy cgroup attribute is now enabled for
all cgroups systemd creates in the memory cgroup
* InaccessibleDirectories= and ReadOnlyDirectories= now take
paths that are optionally prefixed with "-" to indicate that
- it should not be considered a failure if they don't exist.
+ it should not be considered a failure if they do not exist.
* journalctl -o (and similar commands) now understands a new
output mode "short-precise", it is similar to "short" but
certain paths from operation.
* journald will now automatically flush all messages to disk
- as soon as a message of the log priorities CRIT, ALERT or
- EMERG is received.
+ as soon as a message at the log level CRIT, ALERT or EMERG
+ is received.
Contributions from: Andrew Cook, Brandon Philips, Christian
Hesse, Christoph Junghans, Colin Walters, Daniel Schaal,
databases to pre-generate dead device nodes based on meta
information contained in kernel modules, so that these would
be auto-loaded on access rather then at boot. As this
- doesn't really have much to do with the exposing actual
+ does not really have much to do with the exposing actual
kernel devices to userspace this has always been slightly
alien in the udev codebase. Following the new scheme kmod
will now generate a runtime snippet for tmpfiles from the
not available as public API.
* systemd will now look for the "debug" argument on the kernel
- command line and enable debug logging, similar to
+ command line and enable debug logging, similar to what
"systemd.log_level=debug" already did before.
* "systemctl set-default", "systemctl get-default" has been
* 'systemd-analyze dot' gained the ability to filter for
specific units via shell-style globs, to create smaller,
- more useful graphs. I.e. it's now possible to create simple
+ more useful graphs. I.e. it is now possible to create simple
graphs of all the dependencies between only target units, or
of all units that Avahi has dependencies with.
* The various "environment" files, such as /etc/locale.conf
now support continuation lines with a backslash ("\") as
- last character in the line, similar in style (but different)
+ last character in the line, similarly in style (but different)
to how this is supported in shells.
* For normal user processes the _SYSTEMD_USER_UNIT= field is
* "systemctl unlock-sessions" has been added, that allows
unlocking the screens of all user sessions at once, similar
- how "systemctl lock-sessions" already locked all users
+ to how "systemctl lock-sessions" already locked all users
sessions. This is backed by a new D-Bus call UnlockSessions().
* "loginctl seat-status" will now show the master device of a
pager. This is only supported in conjunction with "less".
* journalctl gained a new "--user-unit=" option, that works
- similar to "--unit=" but filters for user units rather than
+ similarly to "--unit=" but filters for user units rather than
system units.
* A number of unit files to ease adoption of systemd in
http://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames
* Auke Kok's bootchart implementation has been added to the
- systemd tree. It's an optional component that can graph the
- boot in quite some detail. It's one of the best bootchart
+ systemd tree. It is an optional component that can graph the
+ boot in quite some detail. It is one of the best bootchart
implementations around and minimal in its code and
dependencies.
PolicyKit-less systems. Quite frankly this should have been
this way since day one. It is absolutely our intention to
make systemd work fine on PolicyKit-less systems, and we
- consider it a bug if something doesn't work as it should if
+ consider it a bug if something does not work as it should if
PolicyKit is not around.
* For embedded systems it is now possible to build udev and
* The bash completion logic is now available for journalctl
too.
- * We don't mount the "cpuset" controller anymore together with
+ * We do not mount the "cpuset" controller anymore together with
"cpu" and "cpuacct", as "cpuset" groups generally cannot be
started if no parameters are assigned to it. "cpuset" hence
broke code that assumed it it could create "cpu" groups and
CHANGES WITH 190:
- * Whenever a unit changes state we'll now log this to the
+ * Whenever a unit changes state we will now log this to the
journal and show along the unit's own log output in
"systemctl status".
* There's now a new RPM macro definition for the system preset
dir: %_presetdir.
- * journald will now warn if it can't forward a message to the
- syslog daemon because it's socket is full.
+ * journald will now warn if it ca not forward a message to the
+ syslog daemon because its socket is full.
* timedated will no longer write or process /etc/timezone,
except on Debian. As we do not support late mounted /usr
* systemctl will now warn you if .mount units generated from
/etc/fstab are out of date due to changes in fstab that
- haven't been read by systemd yet.
+ have not been read by systemd yet.
* systemd is now suitable for usage in initrds. Dracut has
already been updated to make use of this. With this in place
* We now mount /tmp as tmpfs by default, but this can be
masked and /etc/fstab can override it.
- * Since udisks doesn't make use of /media anymore we are not
+ * Since udisks does not make use of /media anymore we are not
mounting a tmpfs on it anymore.
* journalctl gained a new --local switch to only interleave
folks
* We now refuse non-UTF8 strings used in various configuration
- and unit files. This is done to ensure we don't pass invalid
+ and unit files. This is done to ensure we do not pass invalid
data over D-Bus or expose it elsewhere.
* Register Mimo USB Screens as suitable for automatic seat
death, since fanotify() will not see accesses done by blkid,
or fsck.
- * Don't show kernel threads in systemd-cgls anymore, unless
+ * Do not show kernel threads in systemd-cgls anymore, unless
requested with new -k switch.
Contributions from: Dan Horák, Kay Sievers, Lennart
--with-rootprefix= to follow the naming used by udev and
kmod
- * Unless specified otherwise we'll now install to /usr instead
+ * Unless specified otherwise we will now install to /usr instead
of /usr/local by default.
* Processes with '@' in argv[0][0] are now excluded from the
~ianmdlvl / elogind.git / blobdiff