systemd System and Service Manager
+CHANGES WITH 213:
+
+ * A new "systemd-timesyncd" daemon has been added for
+ synchronizing the system clock across the network. It
+ implements an SNTP client. In contrast to NTP
+ implementations such as chrony or the NTP reference server
+ this only implements a client side, and does not bother with
+ the full NTP complexity, focusing only on querying time from
+ one remote server and synchronizing the local clock to
+ it. Unless you intend to serve NTP to networked clients or
+ want to connect to local hardware clocks this simple NTP
+ client should be more than appropriate for most
+ installations. The daemon runs with minimal privileges, and
+ has been hooked up with networkd to only operate when
+ network connectivity is available. The daemon saves the
+ current clock to disk every time a new NTP sync has been
+ acquired, and uses this to possibly correct the system clock
+ early at bootup, in order to accommodate for systems that
+ lack an RTC such as the Raspberry Pi and embedded devices,
+ and make sure that time monotonically progresses on these
+ systems, even if it is not always correct. To make use of
+ this daemon a new system user and group "systemd-timesync"
+ needs to be created on installation of systemd.
+
+ * The queue "seqnum" interface of libudev has been disabled, as
+ it was generally incompatible with device namespacing as
+ sequence numbers of devices go "missing" if the devices are
+ part of a different namespace.
+
+ * "systemctl list-timers" and "systemctl list-sockets" gained
+ a --recursive switch for showing units of these types also
+ for all local containers, similar in style to the already
+ supported --recursive switch for "systemctl list-units".
+
+ * A new RebootArgument= setting has been added for service
+ units, which may be used to specify a kernel reboot argument
+ to use when triggering reboots with StartLimitAction=.
+
+ * A new FailureAction= setting has been added for service
+ units which may be used to specify an operation to trigger
+ when a service fails. This works similarly to
+ StartLimitAction=, but unlike it controls what is done
+ immediately rather than only after several attempts to
+ restart the service in question.
+
+ * hostnamed got updated to also expose the kernel name,
+ release, and version on the bus. This is useful for
+ executing commands like hostnamectl with the -H switch.
+ systemd-analyze makes use of this to properly display
+ details when running non-locally.
+
+ * The bootchart tool can now show cgroup information in the
+ graphs it generates.
+
+ * The CFS CPU quota cgroup attribute is now exposed for
+ services. The new CPUQuota= switch has been added for this
+ which takes a percentage value. Setting this will have the
+ result that a service may never get more CPU time than the
+ specified percentage, even if the machine is otherwise idle.
+
+ * systemd-networkd learned IPIP and SIT tunnel support.
+
+ * LSB init scripts exposing a dependency on $network will now
+ get a dependency on network-online.target rather than simply
+ network.target. This should bring LSB handling closer to
+ what it was on SysV systems.
+
+ * A new fsck.repair= kernel option has been added to control
+ how fsck shall deal with unclean file systems at boot.
+
+ * The (.ini) configuration file parser will now silently
+ ignore sections whose name begins with "X-". This may be
+ used to maintain application-specific extension sections in unit
+ files.
+
+ * machined gained a new API to query the IP addresses of
+ registered containers. "machinectl status" has been updated
+ to show these addresses in its output.
+
+ * A new call sd_uid_get_display() has been added to the
+ sd-login APIs for querying the "primary" session of a
+ user. The "primary" session of the user is elected from the
+ user's sessions and generally a graphical session is
+ preferred over a text one.
+
+ * A minimal systemd-resolved daemon has been added. It
+ currently simply acts as a companion to systemd-networkd and
+ manages resolv.conf based on per-interface DNS
+ configuration, possibly supplied via DHCP. In the long run
+ we hope to extend this into a local DNSSEC enabled DNS and
+ mDNS cache.
+
+ * The systemd-networkd-wait-online tool is now enabled by
+ default. It will delay network-online.target until a network
+ connection has been configured. The tool primarily integrates
+ with networkd, but will also make a best effort to make sense
+ of network configuration performed in some other way.
+
+ * Two new service options StartupCPUShares= and
+ StartupBlockIOWeight= have been added that work similarly to
+ CPUShares= and BlockIOWeight= however only apply during
+ system startup. This is useful to prioritize certain services
+ differently during bootup than during normal runtime.
+
+ * hostnamed has been changed to prefer the statically
+ configured hostname in /etc/hostname (unless set to
+ 'localhost' or empty) over any dynamic one supplied by
+ dhcp. With this change the rules for picking the hostname
+ match more closely the rules of other configuration settings
+ where the local administrator's configuration in /etc always
+ overrides any other settings.
+
+ Contributions fron: Ali H. Caliskan, Alison Chaiken, Bas van
+ den Berg, Brandon Philips, Cristian Rodríguez, Daniel Buch,
+ Dan Kilman, Dave Reisner, David Härdeman, David Herrmann,
+ David Strauss, Dimitris Spingos, Djalal Harouni, Eelco
+ Dolstra, Evan Nemerson, Florian Albrechtskirchinger, Greg
+ Kroah-Hartman, Harald Hoyer, Holger Hans Peter Freyther, Jan
+ Engelhardt, Jani Nikula, Jason St. John, Jeffrey Clark,
+ Jonathan Boulle, Kay Sievers, Lennart Poettering, Lukas
+ Nykryn, Lukasz Skalski, Łukasz Stelmach, Mantas Mikulėnas,
+ Marcel Holtmann, Martin Pitt, Matthew Monaco, Michael
+ Marineau, Michael Olbrich, Michal Sekletar, Mike Gilbert, Nis
+ Martensen, Patrik Flykt, Philip Lorenz, poma, Ray Strode,
+ Reyad Attiyat, Robert Milasan, Scott Thrasher, Stef Walter,
+ Steven Siloti, Susant Sahani, Tanu Kaskinen, Thomas Bächler,
+ Thomas Hindoe Paaboel Andersen, Tom Gundersen, Umut Tezduyar
+ Lindskog, WaLyong Cho, Will Woods, Zbigniew
+ Jędrzejewski-Szmek
+
+ -- Beijing, 2014-05-28
+
CHANGES WITH 212:
* When restoring the screen brightness at boot, stay away from
* sd-login gained new calls
sd_peer_get_{session,owner_uid,unit,user_unit,slice,machine_name}(),
to query the identity of the peer of a local AF_UNIX
- connection. They operate similar to their sd_pid_get_xyz()
+ connection. They operate similarly to their sd_pid_get_xyz()
counterparts.
* PID 1 will now maintain a system-wide system state engine
* systemd-nspawn gained a new --network-macvlan= setting to
set up a private macvlan interface for the
- container. Similar, systemd-networkd gained a new
+ container. Similarly, systemd-networkd gained a new
Kind=macvlan setting in .netdev files.
* systemd-networkd now supports configuring local addresses
not available as public API.
* systemd will now look for the "debug" argument on the kernel
- command line and enable debug logging, similar to
+ command line and enable debug logging, similar to what
"systemd.log_level=debug" already did before.
* "systemctl set-default", "systemctl get-default" has been
* The various "environment" files, such as /etc/locale.conf
now support continuation lines with a backslash ("\") as
- last character in the line, similar in style (but different)
+ last character in the line, similarly in style (but different)
to how this is supported in shells.
* For normal user processes the _SYSTEMD_USER_UNIT= field is
* "systemctl unlock-sessions" has been added, that allows
unlocking the screens of all user sessions at once, similar
- how "systemctl lock-sessions" already locked all users
+ to how "systemctl lock-sessions" already locked all users
sessions. This is backed by a new D-Bus call UnlockSessions().
* "loginctl seat-status" will now show the master device of a
pager. This is only supported in conjunction with "less".
* journalctl gained a new "--user-unit=" option, that works
- similar to "--unit=" but filters for user units rather than
+ similarly to "--unit=" but filters for user units rather than
system units.
* A number of unit files to ease adoption of systemd in
~ianmdlvl / elogind.git / blobdiff