# Leave this set to `false' for production use.
DEBUG = false
+# Set this to compile with Security-Enhanced Linux support.
+USE_SELINUX = false
ROOT = udev
DAEMON = udevd
INFO = udevinfo
TESTER = udevtest
STARTER = udevstart
-RULER = udevruler
WAIT = wait_for_sysfs
-VERSION = 032_bk
+VERSION = 045
INSTALL_DIR = /usr/local/bin
RELEASE_NAME = $(ROOT)-$(VERSION)
LOCAL_CFG_DIR = etc/udev
EXTRAS=
# place to put our device nodes
-udevdir = ${prefix}/udev
+udevdir = ${prefix}/udev
+udevdb = ${udevdir}/.udevdb
# Comment out this line to build with something other
# than the local version of klibc
#USE_KLIBC = true
+# make the build silent (well, at least the udev part) Set this
+# to something else to make it noisy again.
+V=false
+
# set up PWD so that older versions of make will work with our build.
PWD = $(shell pwd)
AR = $(CROSS)ar
STRIP = $(CROSS)strip
RANLIB = $(CROSS)ranlib
+HOSTCC = gcc
export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS ARCH_LIB_OBJS CRT0
# add -Wredundant-decls when libsysfs gets cleaned up
WARNINGS := -Wall
-# Some nice architecture specific optimizations
-ifeq ($(strip $(TARGET_ARCH)),arm)
- OPTIMIZATION+=-fstrict-aliasing
-endif
-ifeq ($(strip $(TARGET_ARCH)),i386)
- OPTIMIZATION+=-march=i386
- OPTIMIZATION += ${shell if $(CC) -mpreferred-stack-boundary=2 -S -o /dev/null -xc \
- /dev/null >/dev/null 2>&1; then echo "-mpreferred-stack-boundary=2"; fi}
- OPTIMIZATION += ${shell if $(CC) -malign-functions=0 -malign-jumps=0 -S -o /dev/null -xc \
- /dev/null >/dev/null 2>&1; then echo "-malign-functions=0 -malign-jumps=0"; fi}
- CFLAGS+=-pipe -Dasmlinkage=__attribute__((regparm(0)))
-else
- CFLAGS+=-pipe -Dasmlinkage=
-endif
+CFLAGS := -pipe
ifeq ($(strip $(USE_LOG)),true)
CFLAGS += -DLOG
# link udev against it statically.
# Otherwise, use glibc and link dynamically.
ifeq ($(strip $(USE_KLIBC)),true)
+ KLIBC_FIXUPS_DIR= $(PWD)/klibc_fixups
KLIBC_BASE = $(PWD)/klibc
KLIBC_DIR = $(KLIBC_BASE)/klibc
INCLUDE_DIR := $(KLIBC_BASE)/include
CRT0 = $(KLIBC_DIR)/crt0.o
LIBC = $(ARCH_LIB_OBJS) $(LIB_OBJS) $(CRT0)
- CFLAGS += $(WARNINGS) -nostdinc \
- $(OPTFLAGS) \
- -D__KLIBC__ -fno-builtin-printf \
- -I$(INCLUDE_DIR) \
- -I$(INCLUDE_DIR)/arch/$(ARCH) \
- -I$(INCLUDE_DIR)/bits$(BITSIZE) \
- -I$(GCCINCDIR) \
+ CFLAGS += $(WARNINGS) -nostdinc \
+ $(OPTFLAGS) \
+ -D__KLIBC__ -fno-builtin-printf \
+ -I$(KLIBC_FIXUPS_DIR) \
+ -include $(KLIBC_FIXUPS_DIR)/klibc_fixups.h \
+ -I$(INCLUDE_DIR) \
+ -I$(INCLUDE_DIR)/arch/$(ARCH) \
+ -I$(INCLUDE_DIR)/bits$(BITSIZE) \
+ -I$(GCCINCDIR) \
-I$(LINUX_INCLUDE_DIR)
LIB_OBJS =
LDFLAGS = --static --nostdlib -nostartfiles -nodefaultlibs
LDFLAGS =
endif
-CFLAGS += -I$(PWD)/libsysfs
+ifeq ($(strip $(USE_SELINUX)),true)
+ CFLAGS += -DUSE_SELINUX
+ LIB_OBJS += -lselinux
+endif
+
+CFLAGS += -I$(PWD)/libsysfs/sysfs \
+ -I$(PWD)/libsysfs
# config files automatically generated
GEN_CONFIGS = $(LOCAL_CFG_DIR)/udev.conf
LD="$(LD)" \
SYSFS="$(SYSFS)" \
KERNEL_DIR="$(KERNEL_DIR)" \
+ QUIET="@$(PWD)/ccdv" \
-C $$target $@ ; \
done ; \
fi
$(MAKE) -C klibc SUBDIRS=klibc
-TDB = tdb/tdb.o \
- tdb/spinlock.o
-
SYSFS = $(PWD)/libsysfs/sysfs_bus.o \
$(PWD)/libsysfs/sysfs_class.o \
$(PWD)/libsysfs/sysfs_device.o \
OBJS = udev_lib.o \
udev_config.o \
- udev-add.o \
- udev-remove.o \
+ udev_add.o \
+ udev_remove.o \
+ udev_sysfs.o \
udevdb.o \
namedev.o \
namedev_parse.o \
dev_d.o \
- $(SYSFS) \
- $(TDB)
+ $(SYSFS)
HEADERS = udev.h \
udev_lib.h \
namedev.h \
udev_version.h \
udevdb.h \
- klibc_fixups.h \
+ udev_sysfs.h \
logging.h \
+ selinux.h \
list.h
ifeq ($(strip $(USE_KLIBC)),true)
- OBJS += klibc_fixups.o
- KLIBC_FIXUP = klibc_fixups.o
+ HEADERS += klibc_fixups/klibc_fixups.h \
+ klibc_fixups/mntent.h \
+ klibc_fixups/pwd.h
+
+ OBJS += klibc_fixups/klibc_fixups.o
+ KLIBC_FIXUP = klibc_fixups/klibc_fixups.o
+endif
+
+ifeq ($(strip $(V)),false)
+ QUIET=@./ccdv
+ HOST_PROGS=ccdv
+else
+ QUIET=
+ HOST_PROGS=
endif
# header files automatically generated
GEN_HEADERS = udev_version.h
+ccdv:
+ @echo "Building ccdv"
+ @$(HOSTCC) -O1 ccdv.c -o ccdv
+
# Rules on how to create the generated header files
udev_version.h:
+ @echo "Creating udev_version.h"
@echo \#define UDEV_VERSION \"$(VERSION)\" > $@
- @echo \#define UDEV_ROOT \"$(udevdir)/\" >> $@
- @echo \#define UDEV_DB \"$(udevdir)/.udev.tdb\" >> $@
+ @echo \#define UDEV_ROOT \"$(udevdir)\" >> $@
+ @echo \#define UDEV_DB \"$(udevdb)\" >> $@
@echo \#define UDEV_CONFIG_DIR \"$(configdir)\" >> $@
@echo \#define UDEV_CONFIG_FILE \"$(configdir)/udev.conf\" >> $@
@echo \#define UDEV_RULES_FILE \"$(configdir)/rules.d\" >> $@
$(GEN_MANPAGES): $(GEN_MANPAGESIN)
sed -e "s:@udevdir@:$(udevdir):" < $@.in > $@
-
-$(OBJS): $(GEN_HEADERS)
-$(ROOT).o: $(GEN_HEADERS)
-$(TESTER).o: $(GEN_HEADERS)
-$(INFO).o: $(GEN_HEADERS)
-$(DAEMON).o: $(GEN_HEADERS)
-$(SENDER).o: $(GEN_HEADERS)
-$(STARTER).o: $(GEN_HEADERS)
+$(OBJS): $(GEN_HEADERS) $(HOST_PROGS)
+$(ROOT).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(TESTER).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(INFO).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(DAEMON).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(SENDER).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(STARTER).o: $(GEN_HEADERS) $(HOST_PROGS)
+$(WAIT).o: $(GEN_HEADERS) $(HOST_PROGS)
$(ROOT): $(LIBC) $(ROOT).o $(STARTER).o $(OBJS) $(HEADERS) $(GEN_MANPAGES)
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udev.o udevstart.o $(OBJS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) udev.o udevstart.o $(OBJS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
$(TESTER): $(LIBC) $(TESTER).o $(OBJS) $(HEADERS)
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udevtest.o $(OBJS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) udevtest.o $(OBJS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
$(INFO): $(LIBC) $(INFO).o $(OBJS) $(HEADERS)
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udevinfo.o udev_lib.o udev_config.o udevdb.o $(SYSFS) $(TDB) $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) udevinfo.o udev_lib.o udev_config.o udevdb.o $(SYSFS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
$(DAEMON): $(LIBC) $(DAEMON).o $(OBJS) udevd.h
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udevd.o udev_lib.o $(KLIBC_FIXUP) $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) udevd.o udev_lib.o $(KLIBC_FIXUP) $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
$(SENDER): $(LIBC) $(SENDER).o $(OBJS) udevd.h
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udevsend.o udev_lib.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
-
-$(RULER): $(LIBC) $(RULER).o $(OBJS) $(HEADERS)
- $(LD) $(LDFLAGS) -o $@ $(CRT0) udevruler.o udev_lib.o udev_config.o udevdb.o $(SYSFS) $(TDB) $(LIB_OBJS) $(ARCH_LIB_OBJS) -lnewt
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) udevsend.o udev_lib.o $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
$(WAIT): $(WAIT).o $(OBJS) $(HEADERS) $(LIBC)
- $(LD) $(LDFLAGS) -o $@ $(CRT0) $(WAIT).o $(SYSFS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
- $(STRIPCMD) $@
+ $(QUIET) $(LD) $(LDFLAGS) -o $@ $(CRT0) $(WAIT).o udev_sysfs.o udev_lib.o udev_config.o $(SYSFS) $(LIB_OBJS) $(ARCH_LIB_OBJS)
+ $(QUIET) $(STRIPCMD) $@
+
+#.c.o:
+# $(CC) $(CFLAGS) $(DEFS) $(CPPFLAGS) -c -o $@ $<
+.c.o:
+ $(QUIET) $(CC) $(CFLAGS) -c -o $@ $<
+
clean:
-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
| xargs rm -f
- -rm -f core $(ROOT) $(GEN_HEADERS) $(GEN_CONFIGS) $(GEN_MANPAGES) $(INFO) $(DAEMON) $(SENDER) $(TESTER) $(RULER) $(WAIT)
+ -rm -f core $(ROOT) $(GEN_HEADERS) $(GEN_CONFIGS) $(GEN_MANPAGES) $(INFO) $(DAEMON) $(SENDER) $(TESTER) $(WAIT)
+ -rm -f ccdv
$(MAKE) -C klibc clean
@extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) -C klibc spotless
-rm -f klibc/linux
-DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v -e CVS -e "\.tar\.gz$" -e "\/\." -e releases -e BitKeeper -e SCCS -e "\.tdb$" -e test/sys | sort )
+DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v -e CVS -e "\.tar\.gz" -e "\/\." -e releases -e BitKeeper -e SCCS -e test/sys | sort )
DISTDIR := $(RELEASE_NAME)
srcdir = .
-release: clean
+release: spotless
-rm -rf $(DISTDIR)
mkdir $(DISTDIR)
chmod 777 $(DISTDIR)
@echo "$(RELEASE_NAME).tar.gz created"
-small_release: $(DISTFILES) clean
+small_release: $(DISTFILES) spotless
# @echo $(DISTFILES)
@-rm -rf $(DISTDIR)
@mkdir $(DISTDIR)
@echo "Built $(RELEASE_NAME).tar.gz"
-install-initscript: etc/init.d/udev etc/init.d/udev.debian etc/init.d/udev.init.LSB
+install-initscript: etc/init.d/udev etc/init.d/udev.init.LSB
@if [ -f /etc/redhat-release ]; then \
$(INSTALL_DATA) -D etc/init.d/udev $(DESTDIR)$(initdir)/udev; \
elif [ -f /etc/SuSE-release ]; then \
$(INSTALL_DATA) -D etc/init.d/udev.init.LSB $(DESTDIR)$(initdir)/udev; \
- elif [ -f /etc/debian_version ]; then \
- $(INSTALL_DATA) -D etc/init.d/udev.debian $(DESTDIR)$(initdir)/udev; \
fi
install-config:
$(INSTALL_PROGRAM) -D $(WAIT) $(DESTDIR)$(sbindir)/$(WAIT)
- ln -f -s $(sbindir)/udev $(DESTDIR)$(sbindir)/$(STARTER)
- ln -f -s $(sbindir)/$(SENDER) $(DESTDIR)$(hotplugdir)/10-udev.hotplug
- - ln -f -s $(sbindir)/$(WAIT) $(DESTDIR)$(hotplugdir)/00-wait_for_sysfs.hotplug
+ - ln -f -s $(sbindir)/$(WAIT) $(DESTDIR)$(hotplugdir)/05-wait_for_sysfs.hotplug
ifndef DESTDIR
- - killall udevd
- - rm -f $(udevdir)/.udev.tdb
+ - killall $(DAEMON)
+ - rm -rf $(udevdb)
endif
@extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
uninstall: uninstall-man uninstall-dev.d
- rm $(hotplugdir)/10-udev.hotplug
- - rm $(hotplugdir)/00-wait_for_sysfs.hotplug
+ - rm $(hotplugdir)/05-wait_for_sysfs.hotplug
- rm $(configdir)/rules.d/50-udev.rules
- rm $(configdir)/permissions.d/50-udev.permissions
- rm $(configdir)/udev.conf
- rm $(usrbindir)/$(TESTER)
- rm $(usrbindir)/$(WAIT)
- rmdir $(hotplugdir)
- - rm $(udevdir)/.udev.tdb
+ - rm -rf $(udevdb)
- rmdir $(udevdir)
+ - killall $(DAEMON)
@extras="$(EXTRAS)" ; for target in $$extras ; do \
echo $$target ; \
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
done ; \
+
+test: all
+ @ cd test && ./udev-test.pl
~ianmdlvl / elogind.git / blobdiff