+Summary of changes from v056 to v057
+============================================
+
+<tklauser:access.unizh.ch>:
+ o fix stupid all_partitions bug
+
+Kay Sievers:
+ o add test for make -j4 to build-check
+ o klibc: version 1.0.6
+ o update Debian rules
+ o apply default permissions only for devices that will need it
+ o adapt RELEASE-NOTES
+ o udev_volume_id: fix endianess macros
+ o udev-test.pl: add test for DEVNAME export to RUN environment
+ o update the man page to reflect the recent changes
+ o export DEVNAME to RUN-key executed programs
+ o fix make -j4 and the local klibc-install
+ o update RELEASE-NOTES
+ o add RUN key to be able to run rule based notification
+ o fix udevtest to print the error if logging is disabled
+ o move execute_program to utils + add action to init_device
+ o correct correction for error path for PROGRAM execution
+ o correct error path for PROGRAM execution
+ o klibc: version 1.0.5
+ o check for strlen()==0 before accessing strlen()-1
+ o allow to match against empty key values
+ o read %s{}-sysfs values at any device in the chain
+ o udev_rules.c: don't change sysfs_device while walking up the device chain
+ o klibc: strlcpy/strlcat - don't alter destination if size == 0
+ o fix klibc's broken strlcpy/strlcat
+ o udevinfo: print SYSFS attribute the same way we match it
+ o remove untrusted chars read from sysfs-values or returned by PROGRAM
+ o udevinfo: print errors to stderr instead of stdout
+ o klibc: version 1.0.4
+ o support log-priority levels in udev.conf
+ o test-suite: remove UDEV_TEST, it's not needed anymore
+ o libsysfs: remove trailing slash on SYSFS_PATH override
+
+
+Summary of changes from v055 to v056
+============================================
+
+<tklauser:access.unizh.ch>:
+ o fix header paths in udev_libc_wrapper.c
+
+Kay Sievers:
+ o udev-test.pl: use more common user/group names
+ o klibc: remove SCCS directories from the temporary klibc install
+ o udev-test.pl: add a test where the group cannot be found in /etc/passwd
+ o udev-test.pl: add check for textual uid/gid
+ o fix bad typo that prevents the GROUP to be applied
+ o udevd: don't delay events with TIMEOUT in the environment
+ o klibc: use klcc wrapper instead of our own Makefile
+ o change call_foreach_file to return a list
+
+
+Summary of changes from v054 to v055
+============================================
+
+<jkluebs:luebsphoto.com>:
+ o This patch causes the remove handler to check that each symlink actually points to the correct devnode and skip it if it does not.
+
+<pebenito:gentoo.org>:
+ o udev selinux fix
+
+<tklauser:access.unizh.ch>:
+ o The following patch fixes some warnings when compiling volume_id from udev with the -Wall compiler flag. Define _GNU_SOURCE for strnlen() and correct the path to logging.h
+ o The following patch fixes a warning when compiling chassis_id from udev with the -Wall compiler flag. There are too much conversions in the format string of sscanf(). One %d can be dropped.
+
+Greg Kroah-Hartman:
+ o fix raid rules
+ o added frugalware udev ruleset
+ o merge selinux and Kay's symlink fixes together
+
+Hannes Reinecke:
+ o volume_id: Fix label/uuid reading for reiserfs
+
+Kay Sievers:
+ o add udevstart to the RELEASE-NOTES
+ o volume_id: version 43
+ o clarify the shortcomings of %e
+ o correct rule match for devices without a physical device
+ o remove unneeded code, libsysfs does this for us
+ o add final release note
+ o add ENV{} key to match agains environment variables
+ o simplify sysfs_pair handling
+ o add a test and simplify debug statement
+ o support =, ==, !=, += for the key match and assignment
+ o add OPTION="last_rule" to skip any later rule
+ o rename namedev_dev to udev_rule
+ o correct enum device_type
+ o remove udevstart on make clean
+ o volume_id: version 42
+ o volume_id: version 41
+ o remove unneeded include
+ o The path to dlist.h is not correct
+ o udevinfo -d: use '=' as separator, cause ':' may be a part of the devpath
+ o klibc: version 1.0.3
+ o add RELEASE-NOTES file
+ o test suite: move "driver" link to physical device
+ o remove PLACE key match
+ o don't lookup "root" in the userdb
+ o fix ia64 compile
+ o fix segfaulting udev while DRIVER matching
+ o cleanup list.h
+ o klibc: version 0.214
+ o rename device_list->list to device_list->node
+ o replace strncpy()/strncat() by strlcpy()/strlcat()
+ o split udev and udevstart
+ o udev_volume_id: version 39
+ o rename LOG to USE_LOG in all places
+ o remove Makefile magic for klibc integration
+ o klibc_fixups: remove no longer needed stuff
+ o udev_volume_id: volume_id v38
+ o use numeric owner/group as default values to avoid parsing userdb
+ o fix up segfaulting binaries with new klibc
+ o udevinfo -d: speed-up device dump
+ o klibc: version 0.211
+ o klibc_fixups: remove unneeded stuff
+ o replace weird defines by real code
+ o udev-test.pl: remove useless tests
+ o allow unlimitied count of symlinks
+ o unmap db-file after use
+ o remove typedef for call_foreach_file() handler function
+ o correct udev_init_device
+ o rename attributes to options
+ o kill stupid gcc4 warning
+ o trivial clenaup of namedev code
+ o klibc: check for gcc4
+ o klibc: update v0.205
+
+Thierry Vignaud:
+ o gentoo rule update for raid devices
+
+
+Summary of changes from v053 to v054
+============================================
+
+<tklauser:access.unizh.ch>:
+ o udev_volume_id: add Reiser4 support
+
+Kay Sievers:
+ o namedev: skip backslashes only if followed by newline
+ o wait_for_sysfs: add joydev
+ o udevinfo: print devpath -> node relationship for all devices
+ o trivial rename of some variables
+ o klibc v0.199
+ o big libsysfs diet (pre 2.0 version)
+ o udev_volume_id: volume_id v35
+ o add "serio" to bus list
+ o determine device type in udev_init_device()
+ o move kernel name/number evaluation into udev_init_device()
+ o detect NAME="" as ignore_device rule
+ o trivial namedev cleanup
+ o cleanup db functions
+ o clean up match_place()
+ o switch device type to enum
+ o switch major/minor to dev_t
+ o remove the device node only if the major/minor number matches
+ o libsysfs: work around a klibc bug
+ o introduce OPTIONS=ignore_device, ignore_remove, all_partitions" key
+ o namedev: execute PROGRAM only once and not possibly for every physical device
+
+Patrick Mansfield:
+ o update scsi_id to work with libsysfs changes
+
+
+Summary of changes from v052 to v053
+============================================
+
+Greg Kroah-Hartman:
+ o fix gentoo fb permission issue
+ o allow simple-build-check.sh to go faster if MAKEOPTS is set
+ o make the release tarballs have writable files in them
+ o remove gentoo permission file as it's not valid anymore
+
+Kay Sievers:
+ o fix special file mode mask for temporary device node
+ o udevstart: simplify "dev" file searching
+ o udev_volume_id: remove temporary node creation and parent handling
+ o add %P modifier to query the node name of the parent device
+ o udev_volume_id: remove __packed__ from dasd structure as it does not work
+ o create /block/*/range count of partitons for all_partitions
+
+Patrick Mansfield:
+ o scsi_id changes for use with udev %N and %p
+
+
+Summary of changes from v051 to v052
+============================================
+
+<md:linux.it>:
+ o debian: update rules files
+ o raid-devfs.sh: devfs names for hardware RAID controllers
+ o scsi_id: when udevstart is started, /tmp is not writeable
+ o cdsymlinks.sh: trivial fix, the variable is initialized to '', not 0
+
+<sschweizer:gmail.com>:
+ o gentoo/udev.rules: add default permissions for sound devices
+
+Greg Kroah-Hartman:
+ o fix example comment in ide-devfs.sh
+ o Add infiniband to gentoo rules
+ o Another gentoo fix, adding dvb support
+ o Fix gentoo bug #76056 (fb device group permissions.)
+ o Fix gentoo bug #81102, device nodes for the pktcdvd device
+
+Kay Sievers:
+ o provide temporary device node for callouts to access the device
+ o udev_volume_id: fix dasd disklabel reading with -l option
+ o udev_volume_id: volume_id version 034
+ o udev_volume_id: rename probe_ibm into probe_dasd
+ o udev_volume_id: volume_id version 032
+ o Makefile: add some more warnings and prepare for clean gcc4 compile
+ o Makefile: cleanup conditional config option sections
+ o fix -Wsign-compare warnings
+ o chassis_id: clean compilation and fix bad function parameter passing
+ o simple_build_check: make it possible to pass KERNEL_DIR
+ o selinux: cleanup udev integration
+
+Michael Buesch:
+ o trivial: remove _all_ trailing slashes with no_trailing_slash()
+ o trivial: fix signedness
+ o namdev: allow symlink-only rules to specify node permissions
+ o udevd: fix valgrind warning
+
+
+Summary of changes from v050 to v051
+============================================
+
+<roland:digitalvampire.org>:
+ o This fixes a silly mistake in how udevinfo prints the major and minor numbers (right now it prints the minor next to "MAJOR" and the major next to "MINOR" ;)
+
+<tklauser:access.unizh.chbk>:
+ o I tried to compile udev 050plus with the GCC 4.0 snapshot 200412119 and got two errors about possibly uninitialized structs, so I fixed this.
+
+Christian Bornträger:
+ o udev_volume_id: fix -d option
+
+Greg Kroah-Hartman:
+ o gentoo fb permission fix
+ o fix gcc 2.96 issue in libsysfs
+ o remove the lfs startup script on request of the author
+ o clean up the aoe char device rules, and delete the block one as it's not needed
+ o add aoe block and char device rules to the gentoo rule file
+ o fix udev_volume_id build error
+
+Hannes Reinecke:
+ o rearrange link order in Makefile
+
+Kay Sievers:
+ o udev_volume_id: new version of volume_id
+ o klibc: update to version 0.198
+ o udev_volume_id: fix FAT label reading
+ o klibc: update to version 0.196
+ o udevd: throttle the forking of processes
+ o udevd: add possible initialization of expected_seqnum
+ o udevd: it's obviously not the brightest idea to exit a device node manager if it doesn't find /dev/null
+ o udevd: separate socket handling to prepare for other event sources
+ o udevd: support -d switch to become a daemon
+ o udev_volume_id: version 27
+ o udevd: split up message receiving an queueing
+ o remove useless warning if udev.conf contains keys not read by udev itself
+ o improve event sequence serialization
+ o remove udevsend syslog noise on udevd startup
+ o limit the initial timeout of the udevd event handling
+ o correct detection of hotplug.d/ udevsend loop
+ o correct log statement
+ o remove default_* permissions from udev.conf file
+ o update Fedora config files and add some more tests
+ o allow permissions only rules
+ o add SUBSYSTEM rule to catch all block devices and apply the disk permissions
+ o update Fedora config files
+ o handle renamed network interfaces properly if we manage hotplug.d/
+ o allow multiline rules by backslash at the end of the line
+ o add OnStream tape drive rules
+ o simplify rules file by setting default mode to 0660
+ o simplify permission application
+ o I broke the extras/ again. Add simple build test script now
+ o Merge vrfy.org:/home/kay/src/udev into vrfy.org:/home/kay/src/udev.kay
+ o initial merge of fedora udev.permissions into udev.rules
+ o remove permissions file mentioning from the udev man page
+ o fix some typos in gentoo's udev.rules introduced by the merge
+
+Michael Buesch:
+ o The attached patch fixes the code path if namedev_name_device() fails
+
+Summary of changes from v049 to v050
+============================================
+
+<harald:redhat.com>:
+ o selinux patch
+
+<tklauser:access.unizh.ch>:
+ o I made some more changes to the manpage of udev including
+
+Kay Sievers:
+ o update libsysfs to CVS version and fix segfaulting attribute reading
+ o klibc supports LOG_PID now, so remove our own implementation
+ o avoid building klibc test programs and pass SUBDIRS= to klibc clean
+
+
+Summary of changes from v048 to v049
+============================================
+
+Greg Kroah-Hartman:
+ o fix 'make clean' error in klibc
+
+Kay Sievers:
+ o update klibc to 0.194
+ o export DEVNAME regardless of the state of udev_dev_d
+ o add class specific files for class/spi_transport and class/spi_host
+ o udevd-test.pl: remove wrong date calculation
+ o check earlier if we should run as udevstart
+ o remove double initialization
+ o include missing header to udevtest.c
+ o add -V option to udev to print the version number
+ o prevent udev node creatinon for "class" registration
+ o udevd: serialization of the event sequence of a chain of devices
+ o add a class/fc_host file to the list of what to wait for
+ o udev_volume_id: links sysfs.a instead of all objects
+
+Martin Schlemmer:
+ o remove leftover from udevinfo's -d option
+
+
+Summary of changes from v047 to v048
+============================================
+
+Greg Kroah-Hartman:
+ o fix udev_volume_id so it will now build properly
+ o fix scsi_id build errors due to changes in the main udev makefile
+
+
+Summary of changes from v046 to v047
+============================================
+
+<klauser:access.unizh.ch>:
+ o Various typos and other litte errors in udev.8.in
+
+<sjoerd:spring.luon.net>:
+ o DEVNAME on device removal
+
+<sschweizer:gmail.com>:
+ o Allow GROUP to have modifiers in it
+
+Greg Kroah-Hartman:
+ o add more debian rules files
+ o move distro specific config files into their own directories
+ o update debian rules files
+ o added asterix rules to the gentoo file
+ o use udevstart for udev.init.* files
+ o delete a bunch of files no longer needed
+ o fix gentoo scsi cdrom rule
+ o Fix the multithreaded build again
+ o merge
+ o comment out ability to run udev-test.pl with valgrind
+ o fix spurious valgrind warning in udev
+ o fix udevinfo '-q path' option as it was not working
+ o merge
+ o fix parallel build error
+
+Kay Sievers:
+ o update Fedora dev.d/ example and remove unused conf.d/ directory
+ o don't install distribution specific init script on "make install"
+ o restore OWNER/GROUP assignment in rule coming from RESULT
+ o make gcov compile scripts working with recent gcc
+ o fix udev-test/udev-test.pl to work with again
+ o add net/atml and class/ppdev to the wait_for_sysfs exception list
+ o add net/nlv* devices to the exception list
+ o add "pcmcia" and "fc_transport" to the wait_for_sysfs lists
+ o remove unused timestamp field
+ o simplify permission handling
+ o handle /etc/hotplug.d/ only if the event comes from udevd
+ o trivial cleanups and change some comments
+ o remove unused variables
+ o udevsend/udevd handle events without a subsystem
+ o use blacklist on device "remove" and remove dev.d/ call code duplication
+ o update the man pages and correct Usage: hints
+ o don't call the hotplug scripts with a test run
+ o don't call dev.d/ scripts twice, if directory = subsystem
+ o remove archive file if we changed something
+ o link archive insted of objects
+ o rename udev_lib to udev_utils and dev_d to udev_multiplex
+ o handle whole hotplug event with udevd/udev
+ o integrate wait_for_sysfs in udev
+ o make the searched multiplex directories conditionally
+ o add MANAGED_EVENT to the forked udev environment
+ o export DEVNAME on remove event
+ o export udev_log flag to the environment
+ o remove my test code
+ o add support for /devices-devices without any file to wait for
+ o Patch from Alex Riesen <raa.lkml@gmail.com>
+ o add a bunch of busses to the list of what to wait for
+ o close connection to syslog in forked udevd child
+ o udevd exit path cleanup
+ o fix network device naming bug
+
+
+Summary of changes from v045 to v046
+============================================
+
+Greg Kroah-Hartman:
+ o make spotless for releases
+
+Kay Sievers:
+ o Don't try to print major/minor for devices without a dev file
+ o remove get_device_type and merge that into udev_set_values()
+ o prevent udevd crash if DEVPATH is not set
+ o add ippp and bcrypt to the exception lists of wait_for_sysfs
+ o let klibc add the trailing newline to syslog conditionally
+ o disable logging for udevstart
+ o add NAME{ignore_remove} attribute
+ o remove historical SYSFS_attr="value" format
+ o don't wait for sysfs if the kernel(2.6.10-rc2) tells us what not to expect
+ o change key names in udevinfo sysfs walk to match the kernel
+ o support DRIVER as a rule key
+ o support SUBSYSTEM as a rule key
+ o rename udevdb* to udev_db*
+ o Make dev.d/ handling a separate processing stage
+ o make the udev object available to more processing stages
+ o remove udev_lib dependency from udevsend, which makes it smaller
+ o add ACTION to udev object to expose it to the whole process
+ o make udevinfo's -r option also workimg for symlink queries
+ o let udev act as udevstart if argv[1] == "udevstart"
+ o improve udevinfo sysfs info walk
+ o add sysfs info walk to udevinfo
+ o pass the whole event environment to udevd
+ o replace tdb database by simple lockless file database
+
+
+Summary of changes from v044 to v045
+============================================
+
+Martin Schlemmer:
+ o Some updates for Gentoo's udev rules
+
+
+Summary of changes from v043 to v044
+============================================
+
+Greg Kroah-Hartman:
+ o add cdsymlinks.sh support to gentoo rules file
+ o fix gentoo legacy tty rule
+ o remove 'sudo' usage from the Makefile
+ o make udev-test.pl test for root permissions before running
+
+Kay Sievers:
+ o reduce syslog noise of udevsend if multiple instances try to start udevd
+ o add i2c-dev to the list of devices without a bus
+
+
+Summary of changes from v042 to v043
+============================================
+
+Greg Kroah-Hartman:
+ o add test target to makefile
+ o add dumb script to show all sysfs devices in the system
+
+Kay Sievers:
+ o Shut up wait_for_sysfs class/net failure messages, as it's not possible to
+ get that right for all net devices. Kernels later than 2.6.10-rc1 will
+ handle that by carrying the neccessary information in the hotplug event.
+ o wait() for specific pid to return from fork()
+ o Don't use any syslog() in signal handler, cause it may deadlock
+ o Add support for highpoint ataraid to volume_id to suppress label reading on raid set members.
+ o Add a bunch of devices without "device" symlinks
+ o Exit, if udevtest cannot open the device (segfault)
+ o Patches from Harald Hoyer <harald@redhat.com>
+ o Apply the default permissions even if we found a entry in the permissions
+ file. Correct one test, as the default is applied correctly now and the
+ mode will no longer be 0000.
+ o add test for format chars in multiple symlinks to replace
+ o Add net/vmnet and class/zaptel to the list of devices without physical device
+
+
+Summary of changes from v040 to v042
+============================================
+
+Greg Kroah-Hartman:
+ o add inotify to the rules for gentoo
+
+Kay Sievers:
+ o skip waiting for device if we get a bad event for class creation and not for a device underneath it
+ o add net/pan and net/bnep handling
+ o switch wait for bus_file to stat() instead of open() add net/tun device handling add ieee1394 device handling
+ o Remove the last klibc specific line from the main udev code Move _KLIBC_HAS_ARCH_SIG_ATOMIC_T to the fixup file which is automatically included by the Makefile is we build with klibc
+ o ignore *.rej files from failed patches
+ o update to libsysfs 1.2.0 and add some stuff klib_fixup Now we have only the sysfs.h file different from the upstream version to map our dbg() macro.
+ o improve klibc fixup integration
+ o cleanup udevd/udevstart
+ o expose sysfs functions for sharing it
+
+
+Summary of changes from v039 to v040
+============================================
+
+<jk:blackdown.de>:
+ o wait_for_sysfs update for dm devices
+
+Greg Kroah-Hartman:
+ o sparse cleanups on the tree
+ o fix stupid cut-and-paste error for msr devices on gentoo boxes
+ o add *~ to bk ignore list
+ o delete udevruler.c as per Kay's request
+ o fix up the wait_for_sysfs_test script a bit
+
+Kay Sievers:
+ o fix debug in volume id / fix clashing global var name
+ o volume_id fix
+ o $local user
+ o cleanup netif handling and netif-dev.d/ events
+ o big cleanup of internal udev api
+ o don't wait for dummy devices
+ o close the syslog
+ o Fix ppp net devices in wait_for_sysfs
+ o Fix wait_for_sysfs messages (more debugging info)
+
+
+Summary of changes from v038 to v039
+============================================
+
+Greg Kroah-Hartman:
+ o Hopefully fix the vcs issue in wait_for_sysfs
+ o take out & from wait_for_sysfs_test that I previously missed
+ o add very nice cdsymlinks scripts
+ o add some helper scripts for dvb and input devices
+ o add debian config files
+ o let the extras/ programs build "pretty" also
+ o tweak the ccdv program to handle files in subdirectories being built
+ o crap, I messed up the 'sed' instances pretty badly, this fixes the config and man page mess
+ o fix broken 'make -j5' functionality
+
+Kay Sievers:
+ o swich attribute open() to simple stat()
+ o wait_for_sysfs update for /class/firmware and /class/net/irda devices
+ o fix unusual sysfs behavior for pcmcia_socket
+ o remove sleeps from udev as it is external now
+ o delete udevruler?
+ o Makefile fix
+
+Patrick Mansfield:
+ o update udev to scsi_id 0.7
+ o pass SYSFS setting down for extras builds
+ o move assignments past local variables
+
+
+Summary of changes from v037 to v038
+============================================
+
+<andrew.patterson:hp.com>:
+ o Re: Problem parsing %s in udev rules
+
+Greg Kroah-Hartman:
+ o fix up error in building extras and libsysfs
+
+Summary of changes from v036 to v037
+============================================
+
+<md:linux.it>:
+ o small udev patch
+
+Greg Kroah-Hartman:
+ o fix compilation warning in tdb log message
+ o Fix build error with klibc due to recent changes
+ o merge
+ o add wait_for_sysfs test script to the tarball to help people debug their boxes
+ o add ipsec to wait_for_sysfs ignore list
+ o added ccdv to bk ignore list
+ o a few more Makefile tweaks for the quiet feature
+ o Make the build silent, thanks to a helper program from ncftp
+ o rename files to have '_' instead of '-' in them
+ o change max time to wait in wait_for_sysfs to 10 seconds to hopefully handle some slow machines
+ o add support for class/raw/ to wait_for_sysfs
+ o fix up Makefile for wait_for_sysfs udev_version.h dependancy
+ o remove the debian specific file, as they don't want to share with the rest of the world :(
+
+Kay Sievers:
+ o prevent deadlocks on an corrupt udev database
+ o wait_for_sysfs_update
+
+Michael Buesch:
+ o fix asmlinkage
+ o fix incompatible pointer type warning
+
+
+Summary of changes from v035 to v036
+============================================
+
+Greg Kroah-Hartman:
+ o add the error number to the error message in wait_for_sysfs to help out in debugging problems
+
+Summary of changes from v034 to v035
+============================================
+
+Greg Kroah-Hartman:
+ o added ieee1394 support to wait_for_sysfs
+ o update wait_for_sysfs with a bunch more devices thanks to user reports
+
+Summary of changes from v033 to v034
+============================================
+
+Kay Sievers:
+ o wait_for_sysfs bluetooth class update
+
+Greg Kroah-Hartman:
+ o add comment in wait_for_sysfs to explain the structure better
+ o Revert previous dev_d.c change, it's not what is causing HAL problems
+ o hm, somethings odd with DEVPATH, see if this fixes it
+ o 33_bk mark for the makefile
+ o wait_for_sysfs: clean up the logic for the list of devices that we do not expect device symlinks for
+ o get rid of annoying extra lines in the syslog for some libsysfs debug messages
+ o added support for i2c devices in wait_for_sysfs.c
+ o add support for i2c-adapter devices to wait_for_sysfs.c
+
+Summary of changes from v032 to v033
+============================================
+
+<harald:redhat.com>:
+ o udev close on exec
+ o some cleanups and security fixes
+ o some cleanups and security fixes
+ o selinux for udev
+ o cleanup PATCH for extras/chassis_id/Makefile
+
+<kpfleming:backtobasicsmgmt.com>:
+ o respect prefix= setting in built udev.conf (updated)
+
+Greg Kroah-Hartman:
+ o add support for usb interfaces to wait_for_sysfs to keep it quiet
+ o enable native tdb spinlocks on i386 platforms
+ o delete extras/multipath-tools as per the author's request
+ o be paranoid in dev_d.c
+ o add USE_SELINUX to README documentation so people have a chance to see what is going on
+ o update the selinux.h file to start to look sane
+ o update bk ignore list for the wait_for_sysfs binary
+ o kdetv wants to see device nodes in /dev
+ o update comments in scsi-devfs.sh
+ o fix up Makefiles to get the klibc build working properly
+ o update bk ignore list for new klibc generated files
+ o oops forgot to add the new klibc/include directory
+ o update klibc to version 0.181
+
+Kay Sievers:
+ o fix problems with dev.d and udevstart
+ o wait_for_sysfs debug cleanup
+ o fix problems using scsi_id with udevstart
+ o update volume_id
+ o finally solve the bad sysfs-timing for all of us
+ o volume-id build fix and update
+ o switch udev's seqnum to u64
+ o add enum tests
+ o fix udev segfaults with bad permissions file
+
+Patrick Mansfield:
+ o update udev to include scsi_id 0.6
+
+
+Summary of changes from v031 to v032
+============================================
+
+<harald:redhat.com>:
+ o udev parse bug
+
+Kay Sievers:
+ o handle only block and class devices
+ o fix udevstart badly broken in udev 031
+
+
+Summary of changes from v030 to v031
+============================================
+
+<arun:codemovers.org>:
+ o udev - read long lines from config files overflow fix
+
+<ballarin.marc:gmx.de>:
+ o Update the FAQ with info about hardlink security
+
+<david:fubar.dk>:
+ o compatibility symlinks for udev
+
+David Weinehall:
+ o Minor POSIX-fixes for udev
+
+Greg Kroah-Hartman:
+ o add symlink for video rule
+ o add a "first" list to udevstart and make it contain the class/mem/ devices
+ o fix compiler warning in udevtest.c
+ o Fix old-style pty breakage in rules file for tty device
+ o add rules for i386 cpu devices
+ o add permission for legotower usb devices
+
+Kay Sievers:
+ o Fix naming ethernet devices in udevstart
+ o update udev_volume_id
+ o let /sbin/hotplug execute udev earlier
+ o pass SEQNUM trough udevd
+ o fix manpages based on esr's spambot
+
+Martin Schlemmer:
+ o add microcode rule to permissions.gentoo file
+
+Michael Buesch:
+ o Try to provide a bit of security for hardlinks to /dev entries
+
+Olaf Hering:
+ o udevsend depends on udev_lib.o
+
+Tom Rini:
+ o fix UDEV_NO_SLEEP
+ o clean up start_udev a bit
+ o Make udev/udevstart be one binary
+ o Add 'asmlinkage' to udev-030
+
+
+Summary of changes from v029 to v030
+============================================
+
+Greg Kroah-Hartman:
+ o fix stupid off-by-one bug that caused udevstart to die on x86-64 boxes
+
+
+Summary of changes from v028 to v029
+============================================
+
+Greg Kroah-Hartman:
+ o add permission rule for jogdial device
+ o fix dumb bug I added to udevstart
+ o make a "last list" of devices for udevstart to operate on last
+ o fix permission problem with input event and ts nodes for gentoo
+ o change default perms of misc/rtc to be readable by anyone
+
+Olaf Hering:
+ o allow NAME_SIZE > SYSFS_PATH_MAX
+
+
+Summary of changes from v027 to v028
+============================================
+
+<atul.sabharwal:intel.com>:
+ o Patch for chassis_id exras module
+
+Daniel Drake:
+ o Writing udev rules doc update
+
+Greg Kroah-Hartman:
+ o clean up block whitelist search logic a bit
+ o reverse order of scanning of udevstart to look at class before block
+
+Kay Sievers:
+ o update udev_volume_id
+
+Leann Ogasawara:
+ o udevstart performance increase
+
+Patrick Mansfield:
+ o update udev scsi_id to scsi_id 0.5
+
+
+Summary of changes from v026 to v027
+============================================
+
+<fork0:users.sf.net>:
+ o fix handle leak in udev_lib.c
+
+Greg Kroah-Hartman:
+ o tweak the gentoo default permission rules as they are wrong for tty and misc devices
+
+
+Summary of changes from v025 to v026
+============================================
+
+Arnd Bergmann:
+ o udev rpm fix
+
+Greg Kroah-Hartman:
+ o add test for ! in partition name
+ o 025_bk mark
+ o Update to version 117 of klibc (from version 108)
+ o add volume_id ignore rule for bk
+ o add volume_id support to the udev.spec file
+ o remove dbus and selinux stuff from the udev.spec file
+ o delete udev_selinux as it doesn't work properly and is the wrong way to do it
+ o Deleted the udev_dbus extra as it didn't really work properly and HAL has a real solution now
+ o add udev.permissions.slackware file
+ o udevstart: close open directories
+
+Kay Sievers:
+ o fix udevd zombies
+ o catchup with recent klibc
+ o Re: udevsend fallback
+ o udev_volume_id update
+ o udev callout for reading filesystem labels
+ o udev callout for reading filesystem labels
+ o udev default config layout changes
+
+Leann Ogasawara:
+ o evaluate getenv() return value for udev_config.c
+
+Summary of changes from v024 to v025
+============================================
+
+<md:linux.it>:
+ o devfs.sh-ide-floppy
+
+<sjoerd:spring.luon.net>:
+ o DEVNODE -> DEVNAME transition fixes
+
+Daniel Drake:
+ o Update writing udev rules docs
+
+Greg Kroah-Hartman:
+ o make dev.d call each directory in the directory chain of the device name, instead of just the whole name
+ o add devd_test script
+ o add more permissions based on SuSE's recommendations
+ o added rules for tun and raw devices
+ o add udev conf.d file
+ o Switch the default config to point to a directory for the rules and permission files
+ o update the Red Hat .dev files to work on other distros
+ o add dbus.dev, pam_console.dev and selinux.dev files for /etc/dev.d/default/ usage
+ o add hints for red hat users from Leann Ogasawara <ogasawara@osdl.org>
+ o add scripts to run gcov for udev from Leann Ogasawara <ogasawara@osdl.org>
+ o change permissions on udevd test scripts
+ o Fix build process for users who have LC_ALL set to a non-english language
+ o Added expanded tests to the test framework from Leann Ogasawara <ogasawara@osdl.org>
+ o added execelent "writing udev rules" document from Daniel Drake <dan@reactivated.net>
+ o added rule to put USB printers in their proper places
+ o added rules for CAPI devices
+ o added a dev.d alsa script to help people out
+
+Kay Sievers:
+ o fix test regressions
+ o udev_selinux changes
+ o udevd test script
+ o udev_dbus changes
+ o fix devpath for netdev
+
+Leann Ogasawara:
+ o gcov for udev
+
+
+Summary of changes from v023 to v024
+============================================
+
+<atul.sabharwal:intel.com>:
+ o Add README for chassis_id
+ o Add chassis_id program to extras directory
+
+<chris_friesen:sympatico.ca>:
+ o udevd race conditions and performance, assorted cleanups
+
+<hare:suse.de>:
+ o fix SEGV in libsysfs/dlist.c
+
+<maryedie:osdl.org>:
+ o add OSDL documentation for persistent naming
+
+<md:linux.it>:
+ o small ide-devfs.sh fix
+
+Greg Kroah-Hartman:
+ o remove compiler warning from udevd.c
+ o only generate udev.8 on the fly, not all other man pages
+ o update bk ignore list some more
+ o update bk ignore list
+ o switch to generate the man pages during the normal build, not during the install
+ o convert udev.8.in to use @udevdir@ macro for make install
+ o first step of making man pages dynamically generated
+ o add install and uninstall the etc/dev.d/net/hotplug.dev file to the Makefile
+ o tweak net_test a bit
+ o fix some segfaults when running udevtest for network devices
+ o make a net_test test script using udevtest
+ o handle the subsytem if provided in udevtest
+ o add hotplug.dev script to handle renamed network devices
+ o add a bunch of network class devices to the test sysfs tree
+ o add udevruler to the bk ignore list
+ o update RFC-dev.d docs due to DEVNODE to DEVNAME change
+ o clean up chassis_id coding style
+ o clean up the OSDL document formatting a bit
+ o add netlink rules to devfs and gentoo rules files
+ o added USB device rules to rules files
+ o clean up the gentoo rules file a bit more, adding dri rules
+ o fix up udev.rules to handle oss rules better
+ o 023_bk mark
+ o fix udev.spec file for where udevtest should be placed
+
+Kay Sievers:
+ o tweak node unlink handling
+ o switch udevd's msg_dump() to #define
+ o handle netdev in udevruler
+ o man page cleanup
+ o put config info in db for netdev
+ o increase udevd event timeout
+ o udevstart fix
+ o put netdev handling and dev.d/ in manpages
+ o DEVPATH for netdev
+ o netdev - udevdb+dev.d changes
+ o udevd race conditions and performance, assorted cleanups - take 2
+ o udevinfo patch
+ o dev_d.c file sorting and cleanup
+ o apply all_partitions rule to main block device only
+
+
Summary of changes from v022 to v023
============================================
o mark scsi-devfs.sh as executable
o Increase the name size as requested by Richard Gooch <rgooch@ras.ucalgary.ca>
o fix udevtest to build properly after the big udev_lib change
- o 022 release TAG: v022
Olaf Hering:
o uninitialized variable for mknod and friend
o deleted current extras/multipath directory
o 021_bk mark
o fix the build for older versions of gcc
- o 021 release TAG: v021
Hanna V. Linder:
o Small fix to remove extra "will" in man page
o 017_bk mark
o Add another test to udev-test.pl and fix a bug when only running 1 test
o Fix bug where we did not use the "converted" kernel name if we had no rule
- o v017 release TAG: v017
Patrick Mansfield:
o udev use new libsysfs header file location
o add usb_host and pci_bus to the class blacklist
o added input device rules to udev.rules and udev.rules.devfs
o 013_bk mark
- o v013 release TAG: v013
Hanna V. Linder:
o set default owner/group in db
o Fix bug causing udev to sleep forever waiting for dev file to show up
o change version to 004_bk
o make config files, sysfs root, and udev root configurable from config variables
- o 004 changelog entrys TAG: v004
Robert Love:
o udev: sleep_for_dev() bits
o change the version to 003-bk to keep things sane with people using the bk tree
o got "remove of named devices" working
o fix segfaults when dealing with partitions
- o update changelog for 003 release TAG: v003
Kay Sievers:
o man file update
~ianmdlvl / elogind.git / blobdiff