# There are a number of modifiers that are allowed to be used in the NAME or PROGRAM fields. # They provide the following subsitutions: # %n - the "kernel number" of the device. # for example, 'sda3' has a "kernel number" of '3' # %k - the kernel name for the device. # %M - the kernel major number for the device # %m - the kernel minor number for the device # %b - the bus id for the device # %c - the return value for the CALLOUT program (note, this doesn't work within # the PROGRAM field for the obvious reason.) # %D - use the devfs style disk name for this device. # For partitions, this will result in 'part%n' # If this is not a partition, it will result in 'disc' # # Looking for scsi bus id 42:0:0:1 BUS="scsi", PROGRAM="/bin/echo -n test-%b", ID="test-42:0:0:1", NAME="%c" # A usb camera. BUS="usb", SYSFS_vendor="FUJIFILM", SYSFS_model="M100", NAME="camera%n" # USB Epson printer to be called lp_epson BUS="usb", SYSFS_serial="HXOLL0012202323480", NAME="lp_epson" # USB HP printer to be called lp_hp BUS="usb", SYSFS_serial="W09090207101241330", NAME="lp_hp" # sound card with PCI bus id 00:0b.0 to be the first sound card BUS="pci", ID="00:0b.0", NAME="dsp" # sound card with PCI bus id 00:07.1 to be the second sound card BUS="pci", ID="00:07.1", NAME="dsp1" # USB mouse plugged into the third port of the first hub to be called mouse0 BUS="usb", PLACE="1.3", NAME="mouse0" # USB tablet plugged into the third port of the second hub to be called mouse1 BUS="usb", PLACE="2.3", NAME="mouse1" BUS="usb", PLACE="2.4", NAME="mouse2" # ttyUSB1 should always be called visor KERNEL="ttyUSB1", NAME="visor" KERNEL="ttyUSB0", NAME="pl2303" # a devfs like way to name some tty devices #KERNEL="ttyS*", NAME="tts/%n" #KERNEL="tty*", NAME="vc/%n" # if this is a ide cdrom, name it the default name, and create a symlink to cdrom BUS="ide", PROGRAM="/bin/cat /proc/ide/%k/media", ID="cdrom", NAME="%k", SYMLINK="cdrom" # device mapper creates its own device nodes so ignore these KERNEL="dm-[0-9]*", NAME="" # DRI devices always go into a subdirectory (as per the LSB spec) KERNEL="card*", NAME="dri/card%n"