X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=dgit.git;a=blobdiff_plain;f=git-debrebase.1.pod;h=1156825c8a92831c55507a115b92413ace15fe16;hp=1c3e68128f0e4967e90d1bb9e219b43b075e57a9;hb=2b844820d3d171b554c43bcc69b907932201f769;hpb=da6f19f4f54e84723e9d1435bcfd4f7db8e55986

diff --git a/git-debrebase.1.pod b/git-debrebase.1.pod
index 1c3e6812..1156825c 100644
--- a/git-debrebase.1.pod
+++ b/git-debrebase.1.pod
@@ -55,6 +55,12 @@ The options for git-rebase must either start with C<-i>,
 or be prececded by C<-->,
 to distinguish them from options for git-debrebase.
 
+It is hazardous to use plain git-rebase on a git-debrebase branch,
+because git-rebase has a tendency to start the rebase
+too far back in history,
+and then drop important commits.
+Soo L<git-debrebase(5)/ILLEGAL OPERATIONS>
+
 =item git-debrebase status
 
 Analyses the current branch,
@@ -89,16 +95,29 @@ If the branch is already laundered and stitched, does nothing.
 
 =item git-debrebase prepush [--prose=<for commit message>]
 
+If the branch is unstitched,
+stitches it,
+consuming ffq-prev.
+
+This is a good command to run before pushing to a git server.
+You should consider using B<conclude> instead,
+because that launders the branch too.
+
 =item git-debrebase stitch [--prose=<for commit message>]
 
 Stitches the branch,
 consuming ffq-prev.
-This is a good command to run before pushing to a git server.
 
 If there is no ffq-prev, it is an error, unless --noop-ok.
 
-You should consider using B<conclude> instead,
-because that launders the branch too.
+You should consider using B<prepush> or B<conclude> instead.
+
+=item git-debrebase scrap
+
+Throws away all the work since the branch was last stitched.
+This is done by rewinding you to ffq-prev.
+
+If you are in the middle of a git-rebase, will abort that too.
 
 =item git-debrebase new-upstream <new-version> [<upstream-details>...]
 
@@ -135,6 +154,12 @@ If you git-rebase --abort,
 the whole new upstream operation is aborted,
 except for the laundering.
 
+<new-version>
+may be whole new Debian version, including revision,
+or just the upstream part,
+in which case -1 will be appended
+to make the new Debian version.
+
 The <upstream-details> are, optionally, in order:
 
 =over
@@ -244,6 +269,8 @@ the gbp upstream branch, if there is one.
 It is a snag if it is not an ancestor of HEAD,
 or if the history between the upstream and HEAD
 contains commits which make changes to upstream files.
+If it is not specified,
+the same algorithm is used as for git-debrebase new-upstream.
 
 It is also a snag if the specified upstream
 has a debian/ subdirectory.
@@ -251,11 +278,20 @@ This check exists to detect certain likely user errors,
 but if this situation is true and expected,
 forcing it is fine.
 
+git-debrebase will try to look for the dgit archive view
+of the most recent release,
+and if it finds it will make a pseduomerge so that
+your new git-debrebase view is appropriately fast forward.
+
 The result is a well-formed git-debrebase interchange branch.
 The result is also fast-forward from the gbp branch.
 
+It is a snag if the new branch looks like it will have diverged,
+just as for a laundering/unstitching call to git-debrebase;
+See L</Establish the current branch's ffq-prev>, below.
+
 Note that it is dangerous not to know whether you are
-dealing with a gbp patches-unappled branch containing quilt patches,
+dealing with a gbp patches-unapplied branch containing quilt patches,
 or a git-debrebase interchange branch.
 At worst,
 using the wrong tool for the branch format might result in
@@ -320,6 +356,86 @@ Be sure to not accidentally treat the result as
 a git-debrebase branch,
 or you will drop all the patches!
 
+=item git-debrebase convert-from-dgit-view [<convert-options>] [upstream]
+
+Converts any dgit-compatible git branch
+corresponding to a (possibly hypothetical) 3.0 quilt dsc source package
+into a git-debrebase-compatible branch.
+
+This operation should not be used
+if the branch is already in git-debrebase form.
+Normally git-debrebase will refuse to continue in this case
+(or silently do nothing if the global --noop-ok option is used).
+
+Some representation of the original upstream source code will be needed.
+If I<upstream> is supplied, that must be a suitable upstream commit.
+By default,
+git-debrebase will look first for git tags (as for new-upstream),
+and then for orig tarballs which it will ask dgit to process.
+
+The upstream source must be exactly right and
+all the patches in debian/patches must be up to date.
+Applying the patches from debian/patches to the upstream source
+must result in exactly your HEAD.
+
+The output is laundered and stitched.
+The resulting history is not particularly pretty,
+especially if orig tarball(s) were imported
+to produce a synthetic upstream commit.
+
+The available convert-options are as follows.
+(These must come after convert-from-dgit-view.)
+
+=over
+
+=item --[no-]diagnose
+
+Print additional error messages to help diagnose
+failure to find an appropriate upstream.
+--no-diagnose is the default.
+
+=item --build-products-dir
+
+Directory to look in for orig tarballs.
+The default is the git config option
+dgit.default.build-products-dir
+or failing that, C<..>.
+Passed on to dgit, if git-debrebase invokes dgit.
+
+=item --[no-]origs
+
+Whether to try to look for or use any orig tarballs.
+--origs is the default.
+
+=item --[no-]tags
+
+Whether to try to look for or use any upstream git tags.
+--tags is the default.
+
+=item --always-convert-anyway
+
+Perform the conversion operation,
+producing unpleasant extra history,
+even if the branch seems to be in git-debrebase form already.
+This should not be done unless necessary,
+and it should not be necessary.
+
+=back
+
+=item git-debrebase forget-was-ever-debrebase
+
+Deletes the ffq-prev and debrebase-last refs
+associated with this branch,
+that git-debrebase and dgit use to determine
+whether this branch is managed by git-debrebase,
+and what previous head may need to be stitched back in.
+
+This can be useful if you were just playing with git-debrebase,
+and have used git-reset --hard to go back to a commit
+before your experiments.
+
+Do not use this if you expect to run git-debrebase on the branch again.
+
 =back
 
 =head1 OPTIONS
@@ -384,10 +500,30 @@ it is a snag if <commit-ish> is the anchor
 for the previous upstream version in
 git-debrebase new-upstream operations.
 
+=item --dgit=<program>
+
+Run <program>, instead of dgit from PATH,
+when invocation of dgit is necessary.
+This is provided mostly for the benefit of the test suite.
+
 =item -D
 
 Requests (more) debugging.  May be repeated.
 
+=item --experimntal-merge-resolution
+
+Enable experimental code for handling general merges
+(see L<git-debrebase(5)/General merges>).
+
+This option may generate branch structures that
+require the use of this same option by other people.
+Also you may experience lossage of various kinds,
+including false error messages,
+references to nonexistent documentation,
+being handed an incomprehensible pile of
+multidimensional merge wreckage,
+and/or possible mangling of your package's source code.
+
 =back
 
 =head1 UNSTITCHING AND LAUNDERING