our $our_version = 'UNRELEASED'; ###substituted###
-our @rpushprotovsn_support = qw(2);
+our @rpushprotovsn_support = qw(3 2);
our $protovsn;
our $isuite = 'unstable';
our @deliberatelies;
our %previously;
our $existing_package = 'dpkg';
-our $cleanmode = 'dpkg-source';
+our $cleanmode;
our $changes_since_version;
our $quilt_mode;
our $quilt_modes_re = 'linear|smash|auto|nofix|nocheck';
our %format_ok = map { $_=>1 } ("1.0","3.0 (native)","3.0 (quilt)");
our $suite_re = '[-+.0-9a-z]+';
+our $cleanmode_re = 'dpkg-source(?:-d)?|git|git-ff|check|none';
our (@git) = qw(git);
our (@dget) = qw(dget);
'sbuild' => \@sbuild,
'ssh' => \@ssh,
'dgit' => \@dgit,
+ 'git' => \@git,
'dpkg-source' => \@dpkgsource,
'dpkg-buildpackage' => \@dpkgbuildpackage,
'dpkg-genchanges' => \@dpkggenchanges,
'ch' => \@changesopts,
'mergechanges' => \@mergechanges);
-our %opts_opt_cmdonly = ('gpg' => 1);
+our %opts_opt_cmdonly = ('gpg' => 1, 'git' => 1);
+our %opts_cfg_insertpos = map {
+ $_,
+ scalar @{ $opts_opt_map{$_} }
+} keys %opts_opt_map;
+
+sub finalise_opts_opts();
our $keyid;
autoflush STDOUT 1;
+our $supplementary_message = '';
+
+END {
+ local ($@, $?);
+ print STDERR "! $_\n" foreach $supplementary_message =~ m/^.+$/mg;
+}
+
our $remotename = 'dgit';
our @ourdscfield = qw(Dgit Vcs-Dgit-Master);
our $csuite;
sub protocol_read_bytes ($$) {
my ($fh, $nbytes) = @_;
- $nbytes =~ m/^[1-9]\d{0,5}$/ or badproto \*RO, "bad byte count";
+ $nbytes =~ m/^[1-9]\d{0,5}$|^0$/ or badproto \*RO, "bad byte count";
my $d;
my $got = read $fh, $d, $nbytes;
$got==$nbytes or badproto_badread $fh, "data block";
main usages:
dgit [dgit-opts] clone [dgit-opts] package [suite] [./dir|/dir]
dgit [dgit-opts] fetch|pull [dgit-opts] [suite]
- dgit [dgit-opts] build [git-buildpackage-opts|dpkg-buildpackage-opts]
+ dgit [dgit-opts] build [dpkg-buildpackage-opts]
+ dgit [dgit-opts] sbuild [sbuild-opts]
dgit [dgit-opts] push [dgit-opts] [suite]
dgit [dgit-opts] rpush build-host:build-dir ...
important dgit options:
'dgit-distro.test-dummy.upload-host' => 'test-dummy',
);
-sub git_get_config ($) {
- my ($c) = @_;
+our %gitcfg;
- our %git_get_config_memo;
- if (exists $git_get_config_memo{$c}) {
- return $git_get_config_memo{$c};
- }
+sub git_slurp_config () {
+ local ($debuglevel) = $debuglevel-2;
+ local $/="\0";
- my $v;
- my @cmd = (@git, qw(config --), $c);
- {
- local ($debuglevel) = $debuglevel-2;
- $v = cmdoutput_errok @cmd;
- };
- if ($?==0) {
- } elsif ($?==256) {
- $v = undef;
- } else {
- failedcmd @cmd;
+ my @cmd = (@git, qw(config -z --get-regexp .*));
+ debugcmd "|",@cmd;
+
+ open GITS, "-|", @cmd or failedcmd @cmd;
+ while (<GITS>) {
+ chomp or die;
+ printdebug "=> ", (messagequote $_), "\n";
+ m/\n/ or die "$_ ?";
+ push @{ $gitcfg{$`} }, $'; #';
}
- $git_get_config_memo{$c} = $v;
- return $v;
+ $!=0; $?=0;
+ close GITS
+ or ($!==0 && $?==256)
+ or failedcmd @cmd;
+}
+
+sub git_get_config ($) {
+ my ($c) = @_;
+ my $l = $gitcfg{$c};
+ printdebug"C $c ".(defined $l ? messagequote "'$l'" : "undef")."\n"
+ if $debuglevel >= 4;
+ $l or return undef;
+ @$l==1 or badcfg "multiple values for $c" if @$l > 1;
+ return $l->[0];
}
sub cfg {
badcfg "pushing but distro is configured readonly"
if access_forpush_config() eq '0';
$access_forpush = 1;
+ $supplementary_message = <<'END' unless $we_are_responder;
+Push failed, before we got started.
+You can retry the push, after fixing the problem, if you like.
+END
+ finalise_opts_opts();
+}
+
+sub notpushing () {
+ finalise_opts_opts();
+}
+
+sub supplementary_message ($) {
+ my ($msg) = @_;
+ if (!$we_are_responder) {
+ $supplementary_message = $msg;
+ return;
+ } elsif ($protovsn >= 3) {
+ responder_send_command "supplementary-message ".length($msg)
+ or die $!;
+ print PO $msg or die $!;
+ }
}
sub access_distros () {
@l;
}
-sub access_cfg (@) {
+sub access_cfg_cfgs (@) {
my (@keys) = @_;
my @cfgs;
# The nesting of these loops determines the search order. We put
}
push @cfgs, map { "dgit.default.$_" } @realkeys;
push @cfgs, @rundef;
+ return @cfgs;
+}
+
+sub access_cfg (@) {
+ my (@keys) = @_;
+ my (@cfgs) = access_cfg_cfgs(@keys);
my $value = cfg(@cfgs);
return $value;
}
+sub access_cfg_bool ($$) {
+ my ($def, @keys) = @_;
+ parse_cfg_bool($keys[0], $def, access_cfg(@keys, 'RETURN-UNDEF'));
+}
+
sub string_to_ssh ($) {
my ($spec) = @_;
if ($spec =~ m/\s/) {
open P, "-|", @cmd or die $!;
while (<P>) {
chomp or die;
- printdebug("$debugprefix>|$_|\n");
+ printdebug(">|$_|\n");
push @rows, $_;
}
$!=0; $?=0; close P or failedcmd @cmd;
my $url = "$prefix/$package$suffix";
my @cmd = (qw(curl -sS -I), $url);
my $result = cmdoutput @cmd;
+ $result =~ s/^\S+ 200 .*\n\r?\n//;
+ # curl -sS -I with https_proxy prints
+ # HTTP/1.0 200 Connection established
$result =~ m/^\S+ (404|200) /s or
fail "unexpected results from git check query - ".
Dumper($prefix, $result);
return $tree;
}
-sub mktree_in_ud_from_only_subdir () {
- # changes into the subdir
- my (@dirs) = <*/.>;
- die unless @dirs==1;
- $dirs[0] =~ m#^([^/]+)/\.$# or die;
- my $dir = $1;
- changedir $dir;
-
+sub remove_stray_gits () {
my @gitscmd = qw(find -name .git -prune -print0);
debugcmd "|",@gitscmd;
open GITS, "-|", @gitscmd or failedcmd @gitscmd;
}
}
$!=0; $?=0; close GITS or failedcmd @gitscmd;
+}
+
+sub mktree_in_ud_from_only_subdir () {
+ # changes into the subdir
+ my (@dirs) = <*/.>;
+ die unless @dirs==1;
+ $dirs[0] =~ m#^([^/]+)/\.$# or die;
+ my $dir = $1;
+ changedir $dir;
+ remove_stray_gits();
mktree_in_ud_here();
- my $format=get_source_format();
+ my ($format, $fopts) = get_source_format();
if (madformat($format)) {
rmtree '.pc';
}
my $f = $fi->{Filename};
die "$f ?" if $f =~ m#/|^\.|\.dsc$|\.tmp$#;
- link "../../../$f", $f
+ link_ltarget "../../../$f", $f
or $!==&ENOENT
or die "$f $!";
- complete_file_from_dsc('.', $fi);
+ complete_file_from_dsc('.', $fi)
+ or next;
if (is_orig_file($f)) {
link $f, "../../../../$f"
my $furl = $dscurl;
$furl =~ s{/[^/]+$}{};
$furl .= "/$f";
- die "$f ?" unless $f =~ m/^${package}_/;
+ die "$f ?" unless $f =~ m/^\Q${package}\E_/;
die "$f ?" if $f =~ m#/#;
runcmd_ordryrun_local @curl,qw(-o),$tf,'--',"$furl";
- next if !act_local();
+ return 0 if !act_local();
$downloaded = 1;
}
" demands hash $fi->{Hash} ".
($downloaded ? "(got wrong file from archive!)"
: "(perhaps you should delete this file?)");
+
+ return 1;
}
sub ensure_we_have_orig () {
foreach my $fi (dsc_files_info()) {
my $f = $fi->{Filename};
next unless is_orig_file($f);
- complete_file_from_dsc('..', $fi);
+ complete_file_from_dsc('..', $fi)
+ or next;
}
}
runcmd @git, qw(config), $k, $v;
}
-sub setup_mergechangelogs () {
+sub setup_mergechangelogs (;$) {
+ my ($always) = @_;
+ return unless $always || access_cfg_bool(1, 'setup-mergechangelogs');
+
my $driver = 'dpkg-mergechangelogs';
my $cb = "merge.$driver";
my $attrs = '.git/info/attributes';
rename "$attrs.new", "$attrs" or die "$attrs: $!";
}
+sub setup_useremail (;$) {
+ my ($always) = @_;
+ return unless $always || access_cfg_bool(1, 'setup-useremail');
+
+ my $setup = sub {
+ my ($k, $envvar) = @_;
+ my $v = access_cfg("user-$k", 'RETURN-UNDEF') // $ENV{$envvar};
+ return unless defined $v;
+ set_local_git_config "user.$k", $v;
+ };
+
+ $setup->('email', 'DEBEMAIL');
+ $setup->('name', 'DEBFULLNAME');
+}
+
+sub setup_new_tree () {
+ setup_mergechangelogs();
+ setup_useremail();
+}
+
sub clone ($) {
my ($dstdir) = @_;
canonicalise_suite();
$vcsgiturl =~ s/\s+-b\s+\S+//g;
runcmd @git, qw(remote add vcs-git), $vcsgiturl;
}
- setup_mergechangelogs();
+ setup_new_tree();
runcmd @git, qw(reset --hard), lrref();
printdone "ready for work in $dstdir";
}
} else {
failedcmd @cmd;
}
+
+ if (stat_exists "debian/source/local-options") {
+ fail "git tree contains debian/source/local-options";
+ }
}
sub commit_admin ($) {
progress "nothing quilty to commit, ok.";
return;
}
- runcmd_ordryrun_local @git, qw(add), sort keys %adds;
+ my @adds = map { s/[][*?\\]/\\$&/g; $_; } sort keys %adds;
+ runcmd_ordryrun_local @git, qw(add -f), @adds;
commit_admin "Commit Debian 3.0 (quilt) metadata";
}
sub get_source_format () {
+ my %options;
+ if (open F, "debian/source/options") {
+ while (<F>) {
+ next if m/^\s*\#/;
+ next unless m/\S/;
+ s/\s+$//; # ignore missing final newline
+ if (m/\s*\#\s*/) {
+ my ($k, $v) = ($`, $'); #');
+ $v =~ s/^"(.*)"$/$1/;
+ $options{$k} = $v;
+ } else {
+ $options{$_} = 1;
+ }
+ }
+ F->error and die $!;
+ close F;
+ } else {
+ die $! unless $!==&ENOENT;
+ }
+
if (!open F, "debian/source/format") {
die $! unless $!==&ENOENT;
return '';
$_ = <F>;
F->error and die $!;
chomp;
- return $_;
+ return ($_, \%options);
}
sub madformat ($) {
if (!defined $keyid) {
$keyid = access_cfg('keyid','RETURN-UNDEF');
}
+ if (!defined $keyid) {
+ $keyid = getfield $clogp, 'Maintainer';
+ }
unlink $tfn->('.tmp.asc') or $!==&ENOENT or die $!;
my @sign_cmd = (@gpg, qw(--detach-sign --armor));
push @sign_cmd, qw(-u),$keyid if defined $keyid;
sub dopush ($) {
my ($forceflag) = @_;
printdebug "actually entering push\n";
+ supplementary_message(<<'END');
+Push failed, while preparing your push.
+You can retry the push, after fixing the problem, if you like.
+END
prep_ud();
access_giturl(); # check that success is vaguely likely
my $tfn = sub { ".git/dgit/tag$_[0]"; };
my $tagobjfn;
+ supplementary_message(<<'END');
+Push failed, while signing the tag.
+You can retry the push, after fixing the problem, if you like.
+END
+ # If we manage to sign but fail to record it anywhere, it's fine.
if ($we_are_responder) {
$tagobjfn = $tfn->('.signed.tmp');
responder_receive_files('signed-tag', $tagobjfn);
$changesfile,$changesfile,
$tfn);
}
+ supplementary_message(<<'END');
+Push failed, *after* signing the tag.
+If you want to try again, you should use a new version number.
+END
my $tag_obj_hash = cmdoutput @git, qw(hash-object -w -t tag), $tagobjfn;
runcmd_ordryrun @git, qw(verify-tag), $tag_obj_hash;
runcmd_ordryrun_local @git, qw(update-ref), "refs/tags/$tag", $tag_obj_hash;
+ supplementary_message(<<'END');
+Push failed, while updating the remote git repository - see messages above.
+If you want to try again, you should use a new version number.
+END
if (!check_for_git()) {
create_remote_git_repo();
}
$forceflag."HEAD:".rrref(), $forceflag."refs/tags/$tag";
runcmd_ordryrun @git, qw(update-ref -m), 'dgit push', lrref(), 'HEAD';
+ supplementary_message(<<'END');
+Push failed, after updating the remote git repository.
+If you want to try again, you must use a new version number.
+END
if ($we_are_responder) {
my $dryrunsuffix = act_local() ? "" : ".tmp";
responder_receive_files('signed-dsc-changes',
sign_changes $changesfile;
}
+ supplementary_message(<<'END');
+Push failed, while uploading package(s) to the archive server.
+You can retry the upload of exactly these same files with dput of:
+ $changesfile
+If that .changes file is broken, you will need to use a new version
+number for your next attempt at the upload.
+END
my $host = access_cfg('upload-host','RETURN-UNDEF');
my @hostarg = defined($host) ? ($host,) : ();
runcmd_ordryrun @dput, @hostarg, $changesfile;
printdone "pushed and uploaded $cversion";
+ supplementary_message('');
responder_send_command("complete");
}
sub cmd_clone {
parseopts();
+ notpushing();
my $dstdir;
badusage "-p is not allowed with clone; specify as argument instead"
if defined $package;
}
sub fetchpullargs () {
+ notpushing();
if (!defined $package) {
my $sourcep = parsecontrol('debian/control','debian/control');
$package = getfield $sourcep, 'Source';
}
sub cmd_push {
- pushing();
parseopts();
+ pushing();
badusage "-p is not allowed with dgit push" if defined $package;
check_not_dirty();
my $clogp = parsechangelog();
fail "dgit push: changelog specifies $isuite ($csuite)".
" but command line specifies $specsuite";
}
+ supplementary_message(<<'END');
+Push failed, while checking state of the archive.
+You can retry the push, after fixing the problem, if you like.
+END
if (check_for_git()) {
git_fetch_us();
}
#---------- remote commands' implementation ----------
sub cmd_remote_push_build_host {
- pushing();
my ($nrargs) = shift @ARGV;
my (@rargs) = @ARGV[0..$nrargs-1];
@ARGV = @ARGV[$nrargs..$#ARGV];
$we_are_responder = 1;
$us .= " (build host)";
+ pushing();
+
open PI, "<&STDIN" or die $!;
open STDIN, "/dev/null" or die $!;
open PO, ">&STDOUT" or die $!;
changedir $i_tmp;
($protovsn) = initiator_expect { m/^dgit-remote-push-ready (\S+)/ };
die "$protovsn ?" unless grep { $_ eq $protovsn } @rpushprotovsn_support;
+ $supplementary_message = '' unless $protovsn >= 3;
for (;;) {
my ($icmd,$iargs) = initiator_expect {
m/^(\S+)(?: (.*))?$/;
progress $msg;
}
+sub i_resp_supplementary_message ($) {
+ my ($rhs) = @_;
+ $supplementary_message = protocol_read_bytes \*RO, $rhs;
+}
+
sub i_resp_complete {
my $pid = $i_child_pid;
$i_child_pid = undef; # prevents killing some other process with same pid
local $ENV{'EDITOR'} = cmdoutput qw(realpath --), $0;
local $ENV{'VISUAL'} = $ENV{'EDITOR'};
local $ENV{$fakeeditorenv} = cmdoutput qw(realpath --), $descfn;
- runcmd_ordryrun_local @dpkgsource, qw(--commit .), $patchname;
+ runcmd @dpkgsource, qw(--commit .), $patchname;
}
}
# should be contained within debian/patches.
changedir '../fake';
+ remove_stray_gits();
mktree_in_ud_here();
rmtree '.pc';
- runcmd @git, 'add', '.';
+ runcmd @git, qw(add -Af .);
my $oldtiptree=git_write_tree();
changedir '../work';
my $abbrev = sub {
my $x = $_[0]{Commit};
$x =~ s/(.*?[0-9a-z]{8})[0-9a-z]*$/$1/;
- return $;
+ return $x;
};
my $reportnot = sub {
my ($notp) = @_;
}
sub build_maybe_quilt_fixup () {
- my $format=get_source_format;
+ my ($format,$fopts) = get_source_format;
return unless madformat $format;
# sigh
check_for_vendor_patches();
+ my $clogp = parsechangelog();
+ my $headref = git_rev_parse('HEAD');
+
+ prep_ud();
+ changedir $ud;
+
+ my $upstreamversion=$version;
+ $upstreamversion =~ s/-[^-]*$//;
+
+ if ($fopts->{'single-debian-patch'}) {
+ #quilt_fixup_singlepatch($clogp, $headref, $upstreamversion);
+ die;
+ } else {
+ quilt_fixup_multipatch($clogp, $headref, $upstreamversion);
+ }
+
+ changedir '../../../..';
+ runcmd_ordryrun_local
+ @git, qw(pull --ff-only -q .git/dgit/unpack/work master);
+}
+
+sub quilt_fixup_multipatch ($$$) {
+ my ($clogp, $headref, $upstreamversion) = @_;
+
# Our objective is:
# - honour any existing .pc in case it has any strangeness
# - determine the git commit corresponding to the tip of
# can work. We do this as follows:
# 1. Collect all relevant .orig from parent directory
# 2. Generate a debian.tar.gz out of
- # debian/{patches,rules,source/format}
+ # debian/{patches,rules,source/format,source/options}
# 3. Generate a fake .dsc containing just these fields:
# Format Source Version Files
# 4. Extract the fake .dsc
# 5. If we had a .pc in-tree, delete it, and git-commit
# 6. Back in the main tree, fast forward to the new HEAD
- my $clogp = parsechangelog();
- my $headref = git_rev_parse('HEAD');
-
- prep_ud();
- changedir $ud;
-
- my $upstreamversion=$version;
- $upstreamversion =~ s/-[^-]*$//;
-
my $fakeversion="$upstreamversion-~~DGITFAKE";
my $fakedsc=new IO::File 'fake.dsc', '>' or die $!;
foreach my $f (<../../../../*>) { #/){
my $b=$f; $b =~ s{.*/}{};
next unless is_orig_file $b, srcfn $upstreamversion,'';
- link $f, $b or die "$b $!";
+ link_ltarget $f, $b or die "$b $!";
$dscaddfile->($b);
}
my @files=qw(debian/source/format debian/rules);
- if (stat_exists '../../../debian/patches') {
- push @files, 'debian/patches';
+ foreach my $maybe (qw(debian/patches debian/source/options)) {
+ next unless stat_exists "../../../$maybe";
+ push @files, $maybe;
}
my $debtar= srcfn $fakeversion,'.debian.tar.gz';
runcmd @git, qw(rm -rqf .pc);
commit_admin "Commit removal of .pc (quilt series tracking data)";
}
-
- changedir '../../../..';
- runcmd @git, qw(pull --ff-only -q .git/dgit/unpack/work master);
}
sub quilt_fixup_editor () {
#----- other building -----
+our $suppress_clean;
+
sub clean_tree () {
+ return if $suppress_clean;
if ($cleanmode eq 'dpkg-source') {
runcmd_ordryrun_local @dpkgbuildpackage, qw(-T clean);
} elsif ($cleanmode eq 'dpkg-source-d') {
sub cmd_clean () {
badusage "clean takes no additional arguments" if @ARGV;
+ notpushing();
clean_tree();
}
sub build_prep () {
+ notpushing();
badusage "-p is not allowed when building" if defined $package;
check_not_dirty();
clean_tree();
build_maybe_quilt_fixup();
}
-sub changesopts () {
+sub changesopts_initial () {
my @opts =@changesopts[1..$#changesopts];
+}
+
+sub changesopts_version () {
if (!defined $changes_since_version) {
my @vsns = archive_query('archive_query');
my @quirk = access_quirk();
}
}
if ($changes_since_version ne '_') {
- unshift @opts, "-v$changes_since_version";
+ return ("-v$changes_since_version");
+ } else {
+ return ();
}
- return @opts;
}
-sub massage_dbp_args ($) {
- my ($cmd) = @_;
- return unless $cleanmode =~ m/git|none/;
+sub changesopts () {
+ return (changesopts_initial(), changesopts_version());
+}
+
+sub massage_dbp_args ($;$) {
+ my ($cmd,$xargs) = @_;
+ if ($cleanmode eq 'dpkg-source') {
+ $suppress_clean = 1;
+ return;
+ }
debugcmd '#massaging#', @$cmd if $debuglevel>1;
my @newcmd = shift @$cmd;
# -nc has the side effect of specifying -b if nothing else specified
push @newcmd, '-nc';
# and some combinations of -S, -b, et al, are errors, rather than
# later simply overriding earlier
- push @newcmd, '-F' unless grep { m/^-[bBASF]$/ } @$cmd;
+ push @newcmd, '-F' unless grep { m/^-[bBASF]$/ } (@$cmd, @$xargs);
push @newcmd, @$cmd;
@$cmd = @newcmd;
}
sub cmd_build {
- build_prep();
- my @dbp = (@dpkgbuildpackage, qw(-us -uc), changesopts(), @ARGV);
+ my @dbp = (@dpkgbuildpackage, qw(-us -uc), changesopts_initial(), @ARGV);
massage_dbp_args \@dbp;
+ build_prep();
+ push @dbp, changesopts_version();
runcmd_ordryrun_local @dbp;
printdone "build successful\n";
}
-sub cmd_git_build {
- build_prep();
+sub cmd_gbp_build {
my @dbp = @dpkgbuildpackage;
- massage_dbp_args \@dbp;
- my @cmd =
- (qw(git-buildpackage -us -uc --git-no-sign-tags),
- "--git-builder=@dbp");
+ massage_dbp_args \@dbp, \@ARGV;
+
+ my @cmd;
+ if (length executable_on_path('git-buildpackage')) {
+ @cmd = qw(git-buildpackage);
+ } else {
+ @cmd = qw(gbp buildpackage);
+ }
+ push @cmd, (qw(-us -uc --git-no-sign-tags), "--git-builder=@dbp");
+
+ if ($cleanmode eq 'dpkg-source') {
+ $suppress_clean = 1;
+ } else {
+ push @cmd, '--git-cleaner=true';
+ }
+ build_prep();
unless (grep { m/^--git-debian-branch|^--git-ignore-branch/ } @ARGV) {
canonicalise_suite();
push @cmd, "--git-debian-branch=".lbranch();
runcmd_ordryrun_local @cmd, @ARGV;
printdone "build successful\n";
}
+sub cmd_git_build { cmd_gbp_build(); } # compatibility with <= 1.0
sub build_source {
+ if ($cleanmode =~ m/^dpkg-source/) {
+ # dpkg-source will clean, so we shouldn't
+ $suppress_clean = 1;
+ }
build_prep();
$sourcechanges = "${package}_".(stripepoch $version)."_source.changes";
$dscfn = dscfn($version);
sub cmd_setup_mergechangelogs {
badusage "no arguments allowed to dgit setup-mergechangelogs" if @ARGV;
- setup_mergechangelogs();
+ setup_mergechangelogs(1);
+}
+
+sub cmd_setup_useremail {
+ badusage "no arguments allowed to dgit setup-mergechangelogs" if @ARGV;
+ setup_useremail(1);
+}
+
+sub cmd_setup_new_tree {
+ badusage "no arguments allowed to dgit setup-tree" if @ARGV;
+ setup_new_tree();
}
#---------- argument parsing and main program ----------
exit 0;
}
+our (%valopts_long, %valopts_short);
+our @rvalopts;
+
+sub defvalopt ($$$$) {
+ my ($long,$short,$val_re,$how) = @_;
+ my $oi = { Long => $long, Short => $short, Re => $val_re, How => $how };
+ $valopts_long{$long} = $oi;
+ $valopts_short{$short} = $oi;
+ # $how subref should:
+ # do whatever assignemnt or thing it likes with $_[0]
+ # if the option should not be passed on to remote, @rvalopts=()
+ # or $how can be a scalar ref, meaning simply assign the value
+}
+
+defvalopt '--since-version', '-v', '[^_]+|_', \$changes_since_version;
+defvalopt '--distro', '-d', '.+', \$idistro;
+defvalopt '', '-k', '.+', \$keyid;
+defvalopt '--existing-package','', '.*', \$existing_package;
+defvalopt '--build-products-dir','','.*', \$buildproductsdir;
+defvalopt '--clean', '', $cleanmode_re, \$cleanmode;
+defvalopt '--quilt', '', $quilt_modes_re, \$quilt_mode;
+
+defvalopt '', '-c', '.*=.*', sub { push @git, '-c', @_; };
+
+defvalopt '', '-C', '.+', sub {
+ ($changesfile) = (@_);
+ if ($changesfile =~ s#^(.*)/##) {
+ $buildproductsdir = $1;
+ }
+};
+
+defvalopt '--initiator-tempdir','','.*', sub {
+ ($initiator_tempdir) = (@_);
+ $initiator_tempdir =~ m#^/# or
+ badusage "--initiator-tempdir must be used specify an".
+ " absolute, not relative, directory."
+};
+
sub parseopts () {
my $om;
@ssh = ($ENV{'GIT_SSH'});
}
+ my $oi;
+ my $val;
+ my $valopt = sub {
+ my ($what) = @_;
+ @rvalopts = ($_);
+ if (!defined $val) {
+ badusage "$what needs a value" unless @ARGV;
+ $val = shift @ARGV;
+ push @rvalopts, $val;
+ }
+ badusage "bad value \`$val' for $what" unless
+ $val =~ m/^$oi->{Re}$(?!\n)/s;
+ my $how = $oi->{How};
+ if (ref($how) eq 'SCALAR') {
+ $$how = $val;
+ } else {
+ $how->($val);
+ }
+ push @ropts, @rvalopts;
+ };
+
while (@ARGV) {
last unless $ARGV[0] =~ m/^-/;
$_ = shift @ARGV;
} elsif (m/^--new$/) {
push @ropts, $_;
$new_package=1;
- } elsif (m/^--since-version=([^_]+|_)$/) {
- push @ropts, $_;
- $changes_since_version = $1;
- } elsif (m/^--([-0-9a-z]+)=(.*)/s &&
+ } elsif (m/^--([-0-9a-z]+)=(.+)/s &&
($om = $opts_opt_map{$1}) &&
length $om->[0]) {
push @ropts, $_;
($om = $opts_opt_map{$1})) {
push @ropts, $_;
push @$om, $2;
- } elsif (m/^--existing-package=(.*)/s) {
- push @ropts, $_;
- $existing_package = $1;
- } elsif (m/^--initiator-tempdir=(.*)/s) {
- $initiator_tempdir = $1;
- $initiator_tempdir =~ m#^/# or
- badusage "--initiator-tempdir must be used specify an".
- " absolute, not relative, directory."
- } elsif (m/^--distro=(.*)/s) {
- push @ropts, $_;
- $idistro = $1;
- } elsif (m/^--build-products-dir=(.*)/s) {
- push @ropts, $_;
- $buildproductsdir = $1;
- } elsif (m/^--clean=(dpkg-source(?:-d)?|git|git-ff|check|none)$/s) {
- push @ropts, $_;
- $cleanmode = $1;
- } elsif (m/^--clean=(.*)$/s) {
- badusage "unknown cleaning mode \`$1'";
- } elsif (m/^--quilt=($quilt_modes_re)$/s) {
- push @ropts, $_;
- $quilt_mode = $1;
- } elsif (m/^--quilt=(.*)$/s) {
- badusage "unknown quilt fixup mode \`$1'";
} elsif (m/^--ignore-dirty$/s) {
push @ropts, $_;
$ignoredirty = 1;
} elsif (m/^--deliberately-($deliberately_re)$/s) {
push @ropts, $_;
push @deliberatelies, $&;
+ } elsif (m/^(--[-0-9a-z]+)(=|$)/ && ($oi = $valopts_long{$1})) {
+ $val = $2 ? $' : undef; #';
+ $valopt->($oi->{Long});
} else {
badusage "unknown long option \`$_'";
}
} elsif (s/^-N/-/) {
push @ropts, $&;
$new_package=1;
- } elsif (s/^-v([^_]+|_)$//s) {
- push @ropts, $&;
- $changes_since_version = $1;
} elsif (m/^-m/) {
push @ropts, $&;
push @changesopts, $_;
$_ = '';
- } elsif (s/^-c(.*=.*)//s) {
- push @ropts, $&;
- push @git, '-c', $1;
- } elsif (s/^-d(.+)//s) {
- push @ropts, $&;
- $idistro = $1;
- } elsif (s/^-C(.+)//s) {
- push @ropts, $&;
- $changesfile = $1;
- if ($changesfile =~ s#^(.*)/##) {
- $buildproductsdir = $1;
- }
- } elsif (s/^-k(.+)//s) {
- $keyid=$1;
- } elsif (m/^-[vdCk]$/) {
- badusage
- "option \`$_' requires an argument (and no space before the argument)";
} elsif (s/^-wn$//s) {
push @ropts, $&;
$cleanmode = 'none';
} elsif (s/^-wc$//s) {
push @ropts, $&;
$cleanmode = 'check';
+ } elsif (m/^-[a-zA-Z]/ && ($oi = $valopts_short{$&})) {
+ $val = $'; #';
+ $val = undef unless length $val;
+ $valopt->($oi->{Short});
+ $_ = '';
} else {
badusage "unknown short option \`$_'";
}
}
}
+sub finalise_opts_opts () {
+ foreach my $k (keys %opts_opt_map) {
+ my $om = $opts_opt_map{$k};
+
+ my $v = access_cfg("cmd-$k", 'RETURN-UNDEF');
+ if (defined $v) {
+ badcfg "cannot set command for $k"
+ unless length $om->[0];
+ $om->[0] = $v;
+ }
+
+ foreach my $c (access_cfg_cfgs("opts-$k")) {
+ my $vl = $gitcfg{$c};
+ printdebug "CL $c ",
+ ($vl ? join " ", map { shellquote } @$vl : ""),
+ "\n" if $debuglevel >= 4;
+ next unless $vl;
+ badcfg "cannot configure options for $k"
+ if $opts_opt_cmdonly{$k};
+ my $insertpos = $opts_cfg_insertpos{$k};
+ @$om = ( @$om[0..$insertpos-1],
+ @$vl,
+ @$om[$insertpos..$#$om] );
+ }
+ }
+}
+
if ($ENV{$fakeeditorenv}) {
+ git_slurp_config();
quilt_fixup_editor();
}
parseopts();
+git_slurp_config();
print STDERR "DRY RUN ONLY\n" if $dryrun_level > 1;
print STDERR "DAMP RUN - WILL MAKE LOCAL (UNSIGNED) CHANGES\n"
$quilt_mode = $1;
}
+if (!defined $cleanmode) {
+ local $access_forpush;
+ $cleanmode = access_cfg('clean-mode', 'RETURN-UNDEF');
+ $cleanmode //= 'dpkg-source';
+
+ badcfg "unknown clean-mode \`$cleanmode'" unless
+ $cleanmode =~ m/^($cleanmode_re)$(?!\n)/s;
+}
+
my $fn = ${*::}{"cmd_$cmd"};
$fn or badusage "unknown operation $cmd";
$fn->();
~ianmdlvl / dgit.git / blobdiff