use LWP::UserAgent;
use Dpkg::Control::Hash;
use File::Path;
+use File::Spec;
use File::Temp qw(tempdir);
use File::Basename;
use Dpkg::Version;
our %format_ok = map { $_=>1 } ("1.0","3.0 (native)","3.0 (quilt)");
our $suite_re = '[-+.0-9a-z]+';
-our $cleanmode_re = 'dpkg-source(?:-d)?|git|git-ff|check|none';
+our $cleanmode_re = qr{(?: dpkg-source (?: -d )? (?: ,no-check | ,all-check )?
+ | (?: git | git-ff ) (?: ,always )?
+ | check (?: ,ignores )?
+ | none
+ )}x;
our $git_authline_re = '^([^<>]+) \<(\S+)\> (\d+ [-+]\d+)$';
our $splitbraincache = 'dgit-intern/quilt-cache';
our (@gbp_build) = ('');
our (@gbp_pq) = ('gbp pq');
our (@changesopts) = ('');
-our (@pbuilder) = ("sudo -E pbuilder");
-our (@cowbuilder) = ("sudo -E cowbuilder");
+our (@pbuilder) = ("sudo -E pbuilder","--no-source-only-changes");
+our (@cowbuilder) = ("sudo -E cowbuilder","--no-source-only-changes");
our %opts_opt_map = ('dget' => \@dget, # accept for compatibility
'curl' => \@curl,
}
sub no_such_package () {
- print STDERR f_ "%s: package %s does not exist in suite %s\n",
+ print STDERR f_ "%s: source package %s does not exist in suite %s\n",
$us, $package, $isuite;
finish 4;
}
printdebug "branch_is_gdr $walk ?-octopus NO\n";
return 0;
}
+ if (!@parents) {
+ printdebug "branch_is_gdr $walk origin\n";
+ return 0;
+ }
if ($get_patches->($walk) ne $tip_patches) {
# Our parent added, removed, or edited patches, and wasn't
# a gdr make-patches commit. gdr make-patches probably
@$l==1 or badcfg
f_ "multiple values for %s (in %s git config)", $c, $src
if @$l > 1;
+ $l->[0] =~ m/\n/ and badcfg f_
+ "value for config option %s (in %s git config) contains newline(s)!",
+ $c, $src;
return $l->[0];
}
return undef;
__ "(nominal) distro being accessed");
}
+sub check_bpd_exists () {
+ stat $buildproductsdir
+ or fail f_ "build-products-dir %s is not accessible: %s\n",
+ $buildproductsdir, $!;
+}
+
+sub dotdot_bpd_transfer_origs ($$$) {
+ my ($bpd_abs, $upstreamversion, $wanted) = @_;
+ # checks is_orig_file_of_vsn and if
+ # calls $wanted->{$leaf} and expects boolish
+
+ return if $buildproductsdir eq '..';
+
+ my $warned;
+ my $dotdot = $maindir;
+ $dotdot =~ s{/[^/]+$}{};
+ opendir DD, $dotdot or fail "opendir .. ($dotdot): $!";
+ while ($!=0, defined(my $leaf = readdir DD)) {
+ {
+ local ($debuglevel) = $debuglevel-1;
+ printdebug "DD_BPD $leaf ?\n";
+ }
+ next unless is_orig_file_of_vsn $leaf, $upstreamversion;
+ next unless $wanted->($leaf);
+ next if lstat "$bpd_abs/$leaf";
+
+ print STDERR f_
+ "%s: found orig(s) in .. missing from build-products-dir, transferring:\n",
+ $us
+ unless $warned++;
+ $! == &ENOENT or fail f_
+ "check orig file %s in bpd %s: %s", $leaf, $bpd_abs, $!;
+ lstat "$dotdot/$leaf" or fail f_
+ "check orig file %s in ..: %s", $leaf, $!;
+ if (-l _) {
+ stat "$dotdot/$leaf" or fail f_
+ "check target of orig symlink %s in ..: %s", $leaf, $!;
+ my $ltarget = readlink "$dotdot/$leaf" or
+ die "readlink $dotdot/$leaf: $!";
+ if ($ltarget !~ m{^/}) {
+ $ltarget = "$dotdot/$ltarget";
+ }
+ symlink $ltarget, "$bpd_abs/$leaf"
+ or die "$ltarget $bpd_abs $leaf: $!";
+ print STDERR f_
+ "%s: cloned orig symlink from ..: %s\n",
+ $us, $leaf;
+ } elsif (link "$dotdot/$leaf", "$bpd_abs/$leaf") {
+ print STDERR f_
+ "%s: hardlinked orig from ..: %s\n",
+ $us, $leaf;
+ } elsif ($! != EXDEV) {
+ fail f_ "failed to make %s a hardlink to %s: %s",
+ "$bpd_abs/$leaf", "$dotdot/$leaf", $!;
+ } else {
+ symlink "$bpd_abs/$leaf", "$dotdot/$leaf"
+ or die "$bpd_abs $dotdot $leaf $!";
+ print STDERR f_
+ "%s: symmlinked orig from .. on other filesystem: %s\n",
+ $us, $leaf;
+ }
+ }
+ die "$dotdot; $!" if $!;
+ closedir DD;
+}
+
sub generate_commits_from_dsc () {
# See big comment in fetch_from_archive, below.
# See also README.dsc-import.
prep_ud();
changedir $playground;
+ my $bpd_abs = bpd_abs();
+ my $upstreamv = upstreamversion $dsc->{version};
my @dfi = dsc_files_info();
+
+ dotdot_bpd_transfer_origs $bpd_abs, $upstreamv,
+ sub { grep { $_->{Filename} eq $_[0] } @dfi };
+
foreach my $fi (@dfi) {
my $f = $fi->{Filename};
die "$f ?" if $f =~ m#/|^\.|\.dsc$|\.tmp$#;
- my $upper_f = (bpd_abs()."/$f");
+ my $upper_f = "$bpd_abs/$f";
printdebug "considering reusing $f: ";
printdebug "considering saving $f: ";
- if (link $f, $upper_f) {
+ if (rename_link_xf 1, $f, $upper_f) {
printdebug "linked.\n";
- } elsif ((printdebug "($!) "),
+ } elsif ((printdebug "($@) "),
$! != EEXIST) {
- fail f_ "saving %s: %s", "$buildproductsdir/$f", $!;
+ fail f_ "saving %s: %s", "$buildproductsdir/$f", $@;
} elsif (!$refetched) {
printdebug "no need.\n";
- } elsif (link $f, "$upper_f,fetch") {
+ } elsif (rename_link_xf 1, $f, "$upper_f,fetch") {
printdebug "linked (using ...,fetch).\n";
- } elsif ((printdebug "($!) "),
+ } elsif ((printdebug "($@) "),
$! != EEXIST) {
- fail f_ "saving %s: %s", "$buildproductsdir/$f,fetch", $!;
+ fail f_ "saving %s: %s", "$buildproductsdir/$f,fetch", $@;
} else {
printdebug "cannot.\n";
}
# from the debian/changelog, so we record the tree objects now and
# make them into commits later.
my @tartrees;
- my $upstreamv = upstreamversion $dsc->{version};
my $orig_f_base = srcfn $upstreamv, '';
foreach my $fi (@dfi) {
}
sub fetch_from_archive () {
+ check_bpd_exists();
ensure_setup_existing_tree();
# Ensures that lrref() is what is actually in the archive, one way
}
printdebug "clone main body\n";
- canonicalise_suite();
- my $hasgit = check_for_git();
mkdir $dstdir or fail f_ "create \`%s': %s", $dstdir, $!;
changedir $dstdir;
+ check_bpd_exists();
+
+ canonicalise_suite();
+ my $hasgit = check_for_git();
+
runcmd @git, qw(init -q);
record_maindir();
setup_new_tree();
}
sub check_not_dirty () {
- foreach my $f (qw(local-options local-patch-header)) {
- if (stat_exists "debian/source/$f") {
- fail f_ "git tree contains debian/source/%s", $f;
+ my @forbid = qw(local-options local-patch-header);
+ @forbid = map { "debian/source/$_" } @forbid;
+ foreach my $f (@forbid) {
+ if (stat_exists $f) {
+ fail f_ "git tree contains %s", $f;
}
}
+ my @cmd = (@git, qw(status -uall --ignored --porcelain));
+ push @cmd, qw(debian/source/format debian/source/options);
+ push @cmd, @forbid;
+
+ my $bad = cmdoutput @cmd;
+ if (length $bad) {
+ fail +(__
+ "you have uncommitted changes to critical files, cannot continue:\n").
+ $bad;
+ }
+
return if $includedirty;
git_check_unmodified();
sub pseudomerge_make_commit ($$$$ $$) {
my ($clogp, $dgitview, $archive_hash, $i_arch_v,
$msg_cmd, $msg_msg) = @_;
- progress f_ "Declaring that HEAD inciudes all changes in %s...",
+ progress f_ "Declaring that HEAD includes all changes in %s...",
$i_arch_v->[0];
my $tree = cmdoutput qw(git rev-parse), "${dgitview}:";
my $i_arch_v = pseudomerge_version_check($clogp, $archive_hash);
if (!defined $overwrite_version) {
- progress __ "Checking that HEAD inciudes all changes in archive...";
+ progress __ "Checking that HEAD includes all changes in archive...";
}
return $dgitview if is_fast_fwd $archive_hash, $dgitview;
if ($sourceonlypolicy eq 'ok') {
} elsif ($sourceonlypolicy eq 'always') {
forceable_fail [qw(uploading-binaries)],
- __ "uploading binaries, although distroy policy is source only"
+ __ "uploading binaries, although distro policy is source only"
if $hasdebs;
} elsif ($sourceonlypolicy eq 'never') {
forceable_fail [qw(uploading-source-only)],
- __ "source-only upload, although distroy policy requires .debs"
+ __ "source-only upload, although distro policy requires .debs"
if !$hasdebs;
} elsif ($sourceonlypolicy eq 'not-wholly-new') {
forceable_fail [qw(uploading-source-only)],
printdebug "considering C=$c->{Commit} P=$p->{Commit}\n";
my @cmd= (@git, qw(diff-tree -r --name-only),
- $p->{Commit},$c->{Commit}, qw(-- debian/patches .pc));
+ $p->{Commit},$c->{Commit},
+ qw(-- debian/patches .pc debian/source/format));
my $patchstackchange = cmdoutput @cmd;
if (length $patchstackchange) {
$patchstackchange =~ s/\n/,/g;
if (act_local()) {
debugcmd "+",@cmd;
$!=0; $?=-1;
- failedcmd @cmd if system @cmd and $?!=7*256;
+ failedcmd @cmd
+ if system @cmd
+ and not ($? == 7*256 or
+ $? == -1 && $!==ENOENT);
} else {
dryrun_report @cmd;
}
# calls $fn->($leafname);
my $bpd_abs = bpd_abs();
+
+ dotdot_bpd_transfer_origs $bpd_abs, $upstreamversion, sub { 1 };
+
opendir QFD, $bpd_abs or fail "buildproductsdir: $bpd_abs: $!";
- while ($!=0, defined(my $b = readdir QFD)) {
- my $f = bpd_abs()."/".$b;
+ while ($!=0, defined(my $leaf = readdir QFD)) {
+ my $f = bpd_abs()."/".$leaf;
{
local ($debuglevel) = $debuglevel-1;
- printdebug "QF linkorigs $b, $f ?\n";
+ printdebug "QF linkorigs bpd $leaf, $f ?\n";
}
- next unless is_orig_file_of_vsn $b, $upstreamversion;
- printdebug "QF linkorigs $b, $f Y\n";
- link_ltarget $f, $b or die "$b $!";
- $fn->($b);
+ next unless is_orig_file_of_vsn $leaf, $upstreamversion;
+ printdebug "QF linkorigs $leaf, $f Y\n";
+ link_ltarget $f, $leaf or die "$leaf $!";
+ $fn->($leaf);
}
die "$buildproductsdir: $!" if $!;
closedir QFD;
changedir "..";
runcmd @dpkgsource, qw(-x), (srcfn $version, ".dsc");
rename srcfn("$upstreamversion", "/debian/patches"),
- "work/debian/patches";
+ "work/debian/patches"
+ or $!==ENOENT
+ or confess "install d/patches: $!";
changedir "work";
commit_quilty_patch();
END
my $dscaddfile=sub {
- my ($b) = @_;
+ my ($leaf) = @_;
my $md = new Digest::MD5;
- my $fh = new IO::File $b, '<' or die "$b $!";
+ my $fh = new IO::File $leaf, '<' or die "$leaf $!";
stat $fh or confess $!;
my $size = -s _;
$md->addfile($fh);
- print $fakedsc " ".$md->hexdigest." $size $b\n" or confess $!;
+ print $fakedsc " ".$md->hexdigest." $size $leaf\n" or confess $!;
};
unpack_playtree_linkorigs($upstreamversion, $dscaddfile);
};
my @dl;
- foreach my $b (qw(01 02)) {
+ foreach my $bits (qw(01 02)) {
foreach my $v (qw(O2H O2A H2A)) {
- push @dl, ($diffbits->{$v} & $b) ? '##' : '==';
+ push @dl, ($diffbits->{$v} & $bits) ? '##' : '==';
}
}
printdebug "differences \@dl @dl.\n";
sub maybe_apply_patches_dirtily () {
return unless $quilt_mode =~ m/gbp|unapplied/;
- print STDERR <<END or confess $!;
+ print STDERR __ <<END or confess $!;
dgit: Building, or cleaning with rules target, in patches-unapplied tree.
dgit: Have to apply the patches - making the tree dirty.
}
sub maybe_unapply_patches_again () {
- progress "dgit: Unapplying patches again to tidy up the tree."
+ progress __ "dgit: Unapplying patches again to tidy up the tree."
if $patches_applied_dirtily;
runcmd qw(dpkg-source --after-build .)
if $patches_applied_dirtily & 01;
#----- other building -----
-our $clean_using_builder;
-# ^ tree is to be cleaned by dpkg-source's builtin idea that it should
-# clean the tree before building (perhaps invoked indirectly by
-# whatever we are using to run the build), rather than separately
-# and explicitly by us.
+sub clean_tree_check_git ($$$) {
+ my ($honour_ignores, $message, $ignmessage) = @_;
+ my @cmd = (@git, qw(clean -dn));
+ push @cmd, qw(-x) unless $honour_ignores;
+ my $leftovers = cmdoutput @cmd;
+ if (length $leftovers) {
+ print STDERR $leftovers, "\n" or confess $!;
+ $message .= $ignmessage if $honour_ignores;
+ fail $message;
+ }
+}
+
+sub clean_tree_check_git_wd ($) {
+ my ($message) = @_;
+ return if $cleanmode =~ m{no-check};
+ return if $patches_applied_dirtily; # yuk
+ clean_tree_check_git +($cleanmode !~ m{all-check}),
+ $message, "\n".__ <<END;
+If this is just missing .gitignore entries, use a different clean
+mode, eg --clean=dpkg-source,no-check (-wdn/-wddn) to ignore them
+or --clean=git (-wg/-wgf) to use \`git clean' instead.
+END
+}
+
+sub clean_tree_check () {
+ # This function needs to not care about modified but tracked files.
+ # That was done by check_not_dirty, and by now we may have run
+ # the rules clean target which might modify tracked files (!)
+ if ($cleanmode =~ m{^check}) {
+ clean_tree_check_git +($cleanmode =~ m{ignores}), __
+ "tree contains uncommitted files and --clean=check specified", '';
+ } elsif ($cleanmode =~ m{^dpkg-source}) {
+ clean_tree_check_git_wd __
+ "tree contains uncommitted files (NB dgit didn't run rules clean)";
+ } elsif ($cleanmode =~ m{^git}) {
+ clean_tree_check_git 1, __
+ "tree contains uncommited, untracked, unignored files\n".
+ "You can use --clean=git[-ff],always (-wga/-wgfa) to delete them.", '';
+ } elsif ($cleanmode eq 'none') {
+ } else {
+ confess "$cleanmode ?";
+ }
+}
sub clean_tree () {
- return if $clean_using_builder;
- if ($cleanmode eq 'dpkg-source') {
- maybe_apply_patches_dirtily();
- runcmd_ordryrun_local @dpkgbuildpackage, qw(-T clean);
- } elsif ($cleanmode eq 'dpkg-source-d') {
+ # We always clean the tree ourselves, rather than leave it to the
+ # builder (dpkg-source, or soemthing which calls dpkg-source).
+ if ($cleanmode =~ m{^dpkg-source}) {
+ my @cmd = @dpkgbuildpackage;
+ push @cmd, qw(-d) if $cleanmode =~ m{^dpkg-source-d};
+ push @cmd, qw(-T clean);
maybe_apply_patches_dirtily();
- runcmd_ordryrun_local @dpkgbuildpackage, qw(-d -T clean);
- } elsif ($cleanmode eq 'git') {
+ runcmd_ordryrun_local @cmd;
+ clean_tree_check_git_wd __
+ "tree contains uncommitted files (after running rules clean)";
+ } elsif ($cleanmode =~ m{^git(?!-)}) {
runcmd_ordryrun_local @git, qw(clean -xdf);
- } elsif ($cleanmode eq 'git-ff') {
+ } elsif ($cleanmode =~ m{^git-ff}) {
runcmd_ordryrun_local @git, qw(clean -xdff);
- } elsif ($cleanmode eq 'check') {
- my $leftovers = cmdoutput @git, qw(clean -xdn);
- if (length $leftovers) {
- print STDERR $leftovers, "\n" or confess $!;
- fail "tree contains uncommitted files and --clean=check specified";
- }
+ } elsif ($cleanmode =~ m{^check}) {
+ clean_tree_check();
} elsif ($cleanmode eq 'none') {
} else {
- die "$cleanmode ?";
+ confess "$cleanmode ?";
}
}
sub cmd_clean () {
- badusage "clean takes no additional arguments" if @ARGV;
+ badusage __ "clean takes no additional arguments" if @ARGV;
notpushing();
clean_tree();
maybe_unapply_patches_again();
sub build_or_push_prep_early () {
our $build_or_push_prep_early_done //= 0;
return if $build_or_push_prep_early_done++;
- badusage "-p is not allowed with dgit $subcommand" if defined $package;
+ badusage f_ "-p is not allowed with dgit %s", $subcommand
+ if defined $package;
my $clogp = parsechangelog();
$isuite = getfield $clogp, 'Distribution';
$package = getfield $clogp, 'Source';
sub build_prep ($) {
my ($wantsrc) = @_;
build_prep_early();
- # clean the tree if we're trying to include dirty changes in the
- # source package, or we are running the builder in $maindir
- clean_tree() if $includedirty || ($wantsrc & WANTSRC_BUILDER);
+ check_bpd_exists();
+ if (!building_source_in_playtree() || ($wantsrc & WANTSRC_BUILDER)
+ # Clean the tree because we're going to use the contents of
+ # $maindir. (We trying to include dirty changes in the source
+ # package, or we are running the builder in $maindir.)
+ || $cleanmode =~ m{always}) {
+ # Or because the user asked us to.
+ clean_tree();
+ } else {
+ # We don't actually need to do anything in $maindir, but we
+ # should do some kind of cleanliness check because (i) the
+ # user may have forgotten a `git add', and (ii) if the user
+ # said -wc we should still do the check.
+ clean_tree_check();
+ }
build_maybe_quilt_fixup();
if ($rmchanges) {
my $pat = changespat $version;
foreach my $f (glob "$buildproductsdir/$pat") {
if (act_local()) {
- unlink $f or fail "remove old changes file $f: $!";
+ unlink $f or
+ fail f_ "remove old changes file %s: %s", $f, $!;
} else {
- progress "would remove $f";
+ progress f_ "would remove %s", $f;
}
}
}
1;
}) {
print STDERR $@;
- fail
+ fail __
"archive query failed (queried because --since-version not specified)";
}
if (@vsns) {
@vsns = map { $_->[0] } @vsns;
@vsns = sort { -version_compare($a, $b) } @vsns;
$changes_since_version = $vsns[0];
- progress "changelog will contain changes since $vsns[0]";
+ progress f_ "changelog will contain changes since %s", $vsns[0];
} else {
$changes_since_version = '_';
- progress "package seems new, not specifying -v<version>";
+ progress __ "package seems new, not specifying -v<version>";
}
}
if ($changes_since_version ne '_') {
$r |= WANTSRC_SOURCE if grep { s/^full$/binary/ } @d;
$r |= WANTSRC_SOURCE if grep { s/^source$// } @d;
$r |= WANTSRC_BUILDER if grep { m/./ } @d;
- fail "Wanted to build nothing!" unless $r;
+ fail __ "Wanted to build nothing!" unless $r;
$dmode = '--build='. join ',', grep m/./, @d;
} else {
$r =
$dmode =~ m/[S]/ ? WANTSRC_SOURCE :
$dmode =~ y/gGF/ABb/ ? WANTSRC_SOURCE | WANTSRC_BUILDER :
$dmode =~ m/[ABb]/ ? WANTSRC_BUILDER :
- die "$dmode ?";
+ confess "$dmode ?";
}
printdebug "massage done $r $dmode.\n";
push @$cmd, $dmode;
} @changesfiles;
my $result;
if (@changesfiles==1) {
- fail <<END.$msg_if_onlyone if defined $msg_if_onlyone;
-only one changes file from build (@changesfiles)
+ fail +(f_ <<END, "@changesfiles").$msg_if_onlyone
+only one changes file from build (%s)
END
+ if defined $msg_if_onlyone;
$result = $changesfiles[0];
} elsif (@changesfiles==2) {
my $binchanges = parsecontrol($changesfiles[1], "binary changes file");
foreach my $l (split /\n/, getfield $binchanges, 'Files') {
- fail "$l found in binaries changes file $binchanges"
+ fail f_ "%s found in binaries changes file %s", $l, $binchanges
if $l =~ m/\.dsc$/;
}
runcmd_ordryrun_local @mergechanges, @changesfiles;
my $multichanges = changespat $version,'multi';
if (act_local()) {
- stat_exists $multichanges
- or fail "$multichanges unexpectedly not created by build";
+ stat_exists $multichanges or fail f_
+ "%s unexpectedly not created by build", $multichanges;
foreach my $cf (glob $pat) {
next if $cf eq $multichanges;
- rename "$cf", "$cf.inmulti" or
- fail "install new changes $cf\{,.inmulti}: $!";
+ rename "$cf", "$cf.inmulti" or fail f_
+ "install new changes %s\{,.inmulti}: %s", $cf, $!;
}
}
$result = $multichanges;
} else {
- fail "wrong number of different changes files (@changesfiles)";
+ fail f_ "wrong number of different changes files (%s)",
+ "@changesfiles";
}
- printdone "build successful, results in $result\n" or confess $!;
+ printdone f_ "build successful, results in %s\n", $result
+ or confess $!;
}
sub midbuild_checkchanges () {
$_ ne changespat $version,'source' and
$_ ne changespat $version,'multi'
} @unwanted;
- fail <<END
-changes files other than source matching $pat already present; building would result in ambiguity about the intended results.
-Suggest you delete @unwanted.
+ fail +(f_ <<END, $pat, "@unwanted")
+changes files other than source matching %s already present; building would result in ambiguity about the intended results.
+Suggest you delete %s.
END
if @unwanted;
}
postbuild_mergechanges(undef);
};
} else {
- printdone "build successful\n";
+ printdone __ "build successful\n";
}
}
sub cmd_build {
build_prep_early();
- $buildproductsdir eq '..' or print STDERR <<END;
-$us: warning: build-products-dir set, but not supported by dpkg-buildpackage
-$us: warning: build-products-dir will be ignored; files will go to ..
+ $buildproductsdir eq '..' or print STDERR +(f_ <<END, $us, $us);
+%s: warning: build-products-dir set, but not supported by dpkg-buildpackage
+%s: warning: build-products-dir will be ignored; files will go to ..
END
$buildproductsdir = '..';
my @dbp = (@dpkgbuildpackage, qw(-us -uc), changesopts_initial(), @ARGV);
build_source();
midbuild_checkchanges_vanilla $wantsrc;
} else {
- if (!$clean_using_builder) {
- push @cmd, '--git-cleaner=true';
- }
+ push @cmd, '--git-cleaner=true';
}
maybe_unapply_patches_again();
if ($wantsrc & WANTSRC_BUILDER) {
$sourcechanges = changespat $version,'source';
if (act_local()) {
unlink "$buildproductsdir/$sourcechanges" or $!==ENOENT
- or fail "remove $sourcechanges: $!";
+ or fail f_ "remove %s: %s", $sourcechanges, $!;
}
my @cmd = (@dpkgsource, qw(-b --));
my $leafdir;
}
} else {
$leafdir = basename $maindir;
+
+ if ($buildproductsdir ne '..') {
+ # Well, we are going to run dpkg-source -b which consumes
+ # origs from .. and generates output there. To make this
+ # work when the bpd is not .. , we would have to (i) link
+ # origs from bpd to .. , (ii) check for files that
+ # dpkg-source -b would/might overwrite, and afterwards
+ # (iii) move all the outputs back to the bpd (iv) except
+ # for the origs which should be deleted from .. if they
+ # weren't there beforehand. And if there is an error and
+ # we don't run to completion we would necessarily leave a
+ # mess. This is too much. The real way to fix this
+ # is for dpkg-source to have bpd support.
+ confess unless $includedirty;
+ fail __
+ "--include-dirty not supported with --build-products-dir, sorry";
+ }
+
changedir '..';
}
runcmd_ordryrun_local @cmd, $leafdir;
my $mv = sub {
my ($why, $l) = @_;
printdebug " renaming ($why) $l\n";
- rename "$l", bpd_abs()."/$l"
- or fail "put in place new built file ($l): $!";
+ rename_link_xf 0, "$l", bpd_abs()."/$l"
+ or fail f_ "put in place new built file (%s): %s", $l, $@;
};
foreach my $l (split /\n/, getfield $dsc, 'Files') {
$l =~ m/\S+$/ or next;
}
sub cmd_build_source {
- badusage "build-source takes no additional arguments" if @ARGV;
+ badusage __ "build-source takes no additional arguments" if @ARGV;
build_prep(WANTSRC_SOURCE);
build_source();
maybe_unapply_patches_again();
- printdone "source built, results in $dscfn and $sourcechanges";
+ printdone f_ "source built, results in %s and %s",
+ $dscfn, $sourcechanges;
}
sub cmd_push_source {
prep_push();
- fail "dgit push-source: --include-dirty/--ignore-dirty does not make".
- "sense with push-source!" if $includedirty;
+ fail __
+ "dgit push-source: --include-dirty/--ignore-dirty does not make".
+ "sense with push-source!"
+ if $includedirty;
build_maybe_quilt_fixup();
if ($changesfile) {
my $changes = parsecontrol("$buildproductsdir/$changesfile",
- "source changes file");
+ __ "source changes file");
unless (test_source_only_changes($changes)) {
- fail "user-specified changes file is not source-only";
+ fail __ "user-specified changes file is not source-only";
}
} else {
# Building a source package is very fast, so just do it
build_source();
- die "er, patches are applied dirtily but shouldn't be.."
+ confess "er, patches are applied dirtily but shouldn't be.."
if $patches_applied_dirtily;
$changesfile = $sourcechanges;
}
midbuild_checkchanges();
in_bpd {
if (act_local()) {
- stat_exists $dscfn or fail "$dscfn (in build products dir): $!";
- stat_exists $sourcechanges
- or fail "$sourcechanges (in build products dir): $!";
+ stat_exists $dscfn or fail f_
+ "%s (in build products dir): %s", $dscfn, $!;
+ stat_exists $sourcechanges or fail f_
+ "%s (in build products dir): %s", $sourcechanges, $!;
}
runcmd_ordryrun_local @$bbuilder, @args;
};
sub cmd_sbuild {
build_prep_early();
- binary_builder(\@sbuild, <<END, qw(-d), $isuite, @ARGV, $dscfn);
+ binary_builder(\@sbuild, (__ <<END), qw(-d), $isuite, @ARGV, $dscfn);
perhaps you need to pass -A ? (sbuild's default is to build only
arch-specific binaries; dgit 1.4 used to override that.)
END
# @ARGV is allowed to contain only things that should be passed to
# pbuilder under debbuildopts; just massage those
my $wantsrc = massage_dbp_args \@ARGV;
- fail "you asked for a builder but your debbuildopts didn't ask for".
- " any binaries -- is this really what you meant?"
- unless $wantsrc & WANTSRC_BUILDER;
- fail "we must build a .dsc to pass to the builder but your debbuiltopts".
- " forbids the building of a source package; cannot continue"
+ fail __
+ "you asked for a builder but your debbuildopts didn't ask for".
+ " any binaries -- is this really what you meant?"
+ unless $wantsrc & WANTSRC_BUILDER;
+ fail __
+ "we must build a .dsc to pass to the builder but your debbuiltopts".
+ " forbids the building of a source package; cannot continue"
unless $wantsrc & WANTSRC_SOURCE;
# We do not want to include the verb "build" in @pbuilder because
# the user can customise @pbuilder and they shouldn't be required
}
sub cmd_print_unapplied_treeish {
- badusage "incorrect arguments to dgit print-unapplied-treeish" if @ARGV;
+ badusage __ "incorrect arguments to dgit print-unapplied-treeish"
+ if @ARGV;
my $headref = git_rev_parse('HEAD');
my $clogp = commit_getclogp $headref;
$package = getfield $clogp, 'Source';
my ($dstref, $newhash, $what_log, $what_msg) = @_;
my @cmd = (git_update_ref_cmd $what_log, $dstref, $newhash);
runcmd @cmd;
- check_gitattrs($newhash, "source tree");
+ check_gitattrs($newhash, __ "source tree");
- progress "dgit: import-dsc: $what_msg";
+ progress f_ "dgit: import-dsc: %s", $what_msg;
}
sub cmd_import_dsc {
if (m/^--require-valid-signature$/) {
$needsig = 1;
} else {
- badusage "unknown dgit import-dsc sub-option \`$_'";
+ badusage f_ "unknown dgit import-dsc sub-option \`%s'", $_;
}
}
- badusage "usage: dgit import-dsc .../PATH/TO/.DSC BRANCH" unless @ARGV==2;
+ badusage __ "usage: dgit import-dsc .../PATH/TO/.DSC BRANCH"
+ unless @ARGV==2;
my ($dscfn, $dstbranch) = @ARGV;
- badusage "dry run makes no sense with import-dsc" unless act_local();
+ badusage __ "dry run makes no sense with import-dsc"
+ unless act_local();
my $force = $dstbranch =~ s/^\+// ? +1 :
$dstbranch =~ s/^\.\.// ? -1 :
my $chead = cmdoutput_errok @symcmd;
defined $chead or $?==256 or failedcmd @symcmd;
- fail "$dstbranch is checked out - will not update it"
+ fail f_ "%s is checked out - will not update it", $dstbranch
if defined $chead and $chead eq $dstbranch;
my $oldhash = git_get_ref $dstbranch;
- open D, "<", $dscfn or fail "open import .dsc ($dscfn): $!";
+ open D, "<", $dscfn or fail f_ "open import .dsc (%s): %s", $dscfn, $!;
$dscdata = do { local $/ = undef; <D>; };
- D->error and fail "read $dscfn: $!";
+ D->error and fail f_ "read %s: %s", $dscfn, $!;
close C;
# we don't normally need this so import it here
local $SIG{__WARN__} = sub {
print STDERR $_[0];
return unless $needsig;
- fail "import-dsc signature check failed";
+ fail __ "import-dsc signature check failed";
};
if (!$dp->is_signed()) {
- warn "$us: warning: importing unsigned .dsc\n";
+ warn f_ "%s: warning: importing unsigned .dsc\n", $us;
} else {
my $r = $dp->check_signature();
- die "->check_signature => $r" if $needsig && $r;
+ confess "->check_signature => $r" if $needsig && $r;
}
}
$package = getfield $dsc, 'Source';
- parse_dsc_field($dsc, "Dgit metadata in .dsc")
+ parse_dsc_field($dsc, __ "Dgit metadata in .dsc")
unless forceing [qw(import-dsc-with-dgit-field)];
parse_dsc_field_def_dsc_distro();
notpushing();
if (defined $dsc_hash) {
- progress "dgit: import-dsc of .dsc with Dgit field, using git hash";
+ progress __
+ "dgit: import-dsc of .dsc with Dgit field, using git hash";
resolve_dsc_field_commit undef, undef;
}
if (defined $dsc_hash) {
"echo $dsc_hash | git cat-file --batch-check");
my $objgot = cmdoutput @cmd;
if ($objgot =~ m#^\w+ missing\b#) {
- fail <<END
-.dsc contains Dgit field referring to object $dsc_hash
+ fail f_ <<END, $dsc_hash
+.dsc contains Dgit field referring to object %s
Your git tree does not have that object. Try `git fetch' from a
-plausible server (browse.dgit.d.o? alioth?), and try the import-dsc again.
+plausible server (browse.dgit.d.o? salsa?), and try the import-dsc again.
END
}
if ($oldhash && !is_fast_fwd $oldhash, $dsc_hash) {
if ($force > 0) {
- progress "Not fast forward, forced update.";
+ progress __ "Not fast forward, forced update.";
} else {
- fail "Not fast forward to $dsc_hash";
+ fail f_ "Not fast forward to %s", $dsc_hash;
}
}
import_dsc_result $dstbranch, $dsc_hash,
"dgit import-dsc (Dgit): $info",
- "updated git ref $dstbranch";
+ f_ "updated git ref %s", $dstbranch;
return 0;
}
- fail <<END
-Branch $dstbranch already exists
-Specify ..$specbranch for a pseudo-merge, binding in existing history
-Specify +$specbranch to overwrite, discarding existing history
+ fail f_ <<END, $dstbranch, $specbranch, $specbranch
+Branch %s already exists
+Specify ..%s for a pseudo-merge, binding in existing history
+Specify +%s to overwrite, discarding existing history
END
if $oldhash && !$force;
my @dfi = dsc_files_info();
foreach my $fi (@dfi) {
my $f = $fi->{Filename};
+ # We transfer all the pieces of the dsc to the bpd, not just
+ # origs. This is by analogy with dgit fetch, which wants to
+ # keep them somewhere to avoid downloading them again.
+ # We make symlinks, though. If the user wants copies, then
+ # they can copy the parts of the dsc to the bpd using dcmd,
+ # or something.
my $here = "$buildproductsdir/$f";
if (lstat $here) {
- next if stat $here;
- fail "lstat $here works but stat gives $! !";
+ if (stat $here) {
+ next;
+ }
+ fail f_ "lstat %s works but stat gives %s !", $here, $!;
}
- fail "stat $here: $!" unless $! == ENOENT;
+ fail f_ "stat %s: %s", $here, $! unless $! == ENOENT;
+ # $f does not exist in bpd, we need to transfer it
my $there = $dscfn;
- if ($dscfn =~ m#^(?:\./+)?\.\./+#) {
- $there = $';
- } elsif ($dscfn =~ m#^/#) {
- $there = $dscfn;
+ $there =~ s{[^/]+$}{$f} or confess "$there ?";
+ # $there is file we want, relative to user's cwd, or abs
+ printdebug "not in bpd, $f, test $there ...\n";
+ stat $there or fail f_
+ "import %s requires %s, but: %s", $dscfn, $there, $!;
+ if ($there =~ m#^(?:\./+)?\.\./+#) {
+ # $there is relative to user's cwd
+ my $there_from_parent = $';
+ if ($buildproductsdir !~ m{^/}) {
+ # abs2rel, despite its name, can take two relative paths
+ $there = File::Spec->abs2rel($there,$buildproductsdir);
+ # now $there is relative to bpd, great
+ } else {
+ $there = (dirname $maindir)."/$there_from_parent";
+ # now $there is absoute
+ }
+ } elsif ($there =~ m#^/#) {
+ # $there is absolute already
} else {
- fail "cannot import $dscfn which seems to be inside working tree!";
+ fail f_
+ "cannot import %s which seems to be inside working tree!",
+ $dscfn;
}
- $there =~ s#/+[^/]+$## or
- fail "import $dscfn requires ../$f, but it does not exist";
- $there .= "/$f";
- my $test = $there =~ m{^/} ? $there : "../$there";
- stat $test or fail "import $dscfn requires $test, but: $!";
- symlink $there, $here or fail "symlink $there to $here: $!";
- progress "made symlink $here -> $there";
+ symlink $there, $here or fail f_
+ "symlink %s to %s: %s", $there, $here, $!;
+ progress f_ "made symlink %s -> %s", $here, $there;
# print STDERR Dumper($fi);
}
my @mergeinputs = generate_commits_from_dsc();
if ($oldhash) {
if ($force > 0) {
- progress "Import, forced update - synthetic orphan git history.";
+ progress __
+ "Import, forced update - synthetic orphan git history.";
} elsif ($force < 0) {
- progress "Import, merging.";
+ progress __ "Import, merging.";
my $tree = cmdoutput @git, qw(rev-parse), "$newhash:";
my $version = getfield $dsc, 'Version';
my $clogp = commit_getclogp $newhash;
my $authline = clogp_authline $clogp;
- $newhash = make_commit_text <<END;
+ $newhash = make_commit_text <<ENDU
tree $tree
parent $newhash
parent $oldhash
author $authline
committer $authline
-Merge $package ($version) import into $dstbranch
+ENDU
+ .(f_ <<END, $package, $version, $dstbranch);
+Merge %s (%s) import into %s
END
} else {
die; # caught earlier
import_dsc_result $dstbranch, $newhash,
"dgit import-dsc: $info",
- "results are in in git ref $dstbranch";
+ f_ "results are in git ref %s", $dstbranch;
}
sub pre_archive_api_query () {
not_necessarily_a_tree();
}
sub cmd_archive_api_query {
- badusage "need only 1 subpath argument" unless @ARGV==1;
+ badusage __ "need only 1 subpath argument" unless @ARGV==1;
my ($subpath) = @ARGV;
local $isuite = 'DGIT-API-QUERY-CMD';
my @cmd = archive_api_query_cmd($subpath);
push @cmd, qw(-f);
debugcmd ">",@cmd;
- exec @cmd or fail "exec curl: $!\n";
+ exec @cmd or fail f_ "exec curl: %s\n", $!;
}
sub repos_server_url () {
not_necessarily_a_tree();
}
sub cmd_clone_dgit_repos_server {
- badusage "need destination argument" unless @ARGV==1;
+ badusage __ "need destination argument" unless @ARGV==1;
my ($destdir) = @ARGV;
my $url = repos_server_url();
my @cmd = (@git, qw(clone), $url, $destdir);
debugcmd ">",@cmd;
- exec @cmd or fail "exec git clone: $!\n";
+ exec @cmd or fail f_ "exec git clone: %s\n", $!;
}
sub pre_print_dgit_repos_server_source_url () {
not_necessarily_a_tree();
}
sub cmd_print_dgit_repos_server_source_url {
- badusage "no arguments allowed to dgit print-dgit-repos-server-source-url"
+ badusage __
+ "no arguments allowed to dgit print-dgit-repos-server-source-url"
if @ARGV;
my $url = repos_server_url();
print $url, "\n" or confess $!;
not_necessarily_a_tree();
}
sub cmd_print_dpkg_source_ignores {
- badusage "no arguments allowed to dgit print-dpkg-source-ignores"
+ badusage __
+ "no arguments allowed to dgit print-dpkg-source-ignores"
if @ARGV;
print "@dpkg_source_ignores\n" or confess $!;
}
sub cmd_setup_mergechangelogs {
- badusage "no arguments allowed to dgit setup-mergechangelogs" if @ARGV;
+ badusage __ "no arguments allowed to dgit setup-mergechangelogs"
+ if @ARGV;
local $isuite = 'DGIT-SETUP-TREE';
setup_mergechangelogs(1);
}
sub cmd_setup_useremail {
- badusage "no arguments allowed to dgit setup-useremail" if @ARGV;
+ badusage __ "no arguments allowed to dgit setup-useremail" if @ARGV;
local $isuite = 'DGIT-SETUP-TREE';
setup_useremail(1);
}
sub cmd_setup_gitattributes {
- badusage "no arguments allowed to dgit setup-useremail" if @ARGV;
+ badusage __ "no arguments allowed to dgit setup-useremail" if @ARGV;
local $isuite = 'DGIT-SETUP-TREE';
setup_gitattrs(1);
}
sub cmd_setup_new_tree {
- badusage "no arguments allowed to dgit setup-tree" if @ARGV;
+ badusage __ "no arguments allowed to dgit setup-tree" if @ARGV;
local $isuite = 'DGIT-SETUP-TREE';
setup_new_tree();
}
defvalopt '--initiator-tempdir','','.*', sub {
($initiator_tempdir) = (@_);
$initiator_tempdir =~ m#^/# or
- badusage "--initiator-tempdir must be used specify an".
- " absolute, not relative, directory."
+ badusage __ "--initiator-tempdir must be used specify an".
+ " absolute, not relative, directory."
};
sub defoptmodes ($@) {
my ($what) = @_;
@rvalopts = ($_);
if (!defined $val) {
- badusage "$what needs a value" unless @ARGV;
+ badusage f_ "%s needs a value", $what unless @ARGV;
$val = shift @ARGV;
push @rvalopts, $val;
}
- badusage "bad value \`$val' for $what" unless
+ badusage f_ "bad value \`%s' for %s", $val, $what unless
$val =~ m/^$oi->{Re}$(?!\n)/s;
my $how = $oi->{How};
if (ref($how) eq 'SCALAR') {
($om = $opts_opt_map{$1})) {
push @ropts, $_;
push @$om, $2;
+ } elsif (m/^--([-0-9a-z]+)\!:(.*)/s &&
+ !$opts_opt_cmdonly{$1} &&
+ ($om = $opts_opt_map{$1})) {
+ push @ropts, $_;
+ my $cmd = shift @$om;
+ @$om = ($cmd, grep { $_ ne $2 } @$om);
} elsif (m/^--(gbp|dpm)$/s) {
push @ropts, "--quilt=$1";
$quilt_mode = $1;
$_='';
} elsif (m/^--force-/) {
print STDERR
- "$us: warning: ignoring unknown force option $_\n";
+ f_ "%s: warning: ignoring unknown force option %s\n",
+ $us, $_;
$_='';
} elsif (m/^--dgit-tag-format=(old|new)$/s) {
# undocumented, for testing
push @ropts, $_;
$funcopts_long{$_}();
} else {
- badusage "unknown long option \`$_'";
+ badusage f_ "unknown long option \`%s'", $_;
}
} else {
while (m/^-./s) {
} elsif (s/^-wn$//s) {
push @ropts, $&;
$cleanmode = 'none';
- } elsif (s/^-wg$//s) {
+ } elsif (s/^-wg(f?)(a?)$//s) {
push @ropts, $&;
$cleanmode = 'git';
- } elsif (s/^-wgf$//s) {
- push @ropts, $&;
- $cleanmode = 'git-ff';
- } elsif (s/^-wd$//s) {
+ $cleanmode .= '-ff' if $1;
+ $cleanmode .= ',always' if $2;
+ } elsif (s/^-wd(d?)([na]?)$//s) {
push @ropts, $&;
$cleanmode = 'dpkg-source';
- } elsif (s/^-wdd$//s) {
- push @ropts, $&;
- $cleanmode = 'dpkg-source-d';
+ $cleanmode .= '-d' if $1;
+ $cleanmode .= ',no-check' if $2 eq 'n';
+ $cleanmode .= ',all-check' if $2 eq 'a';
} elsif (s/^-wc$//s) {
push @ropts, $&;
$cleanmode = 'check';
+ } elsif (s/^-wci$//s) {
+ push @ropts, $&;
+ $cleanmode = 'check,ignores';
} elsif (s/^-c([^=]*)\=(.*)$//s) {
push @git, '-c', $&;
$gitcfgs{cmdline}{$1} = [ $2 ];
$valopt->($oi->{Short});
$_ = '';
} else {
- badusage "unknown short option \`$_'";
+ badusage f_ "unknown short option \`%s'", $_;
}
}
}
foreach my $name (qw(PIPE CHLD)) {
my $signame = "SIG$name";
my $signum = eval "POSIX::$signame" // die;
- die "$signame is set to something other than SIG_DFL\n"
+ die f_ "%s is set to something other than SIG_DFL\n",
+ $signame
if defined $SIG{$name} and $SIG{$name} ne 'DEFAULT';
$blocked->ismember($signum) and
- die "$signame is blocked\n";
+ die f_ "%s is blocked\n", $signame;
}
};
return unless $@;
chomp $@;
- fail <<END;
-On entry to dgit, $@
-This is a bug produced by something in in your execution environment.
+ fail f_ <<END, $@;
+On entry to dgit, %s
+This is a bug produced by something in your execution environment.
Giving up.
END
}
my $v = access_cfg("cmd-$k", 'RETURN-UNDEF');
if (defined $v) {
- badcfg "cannot set command for $k"
+ badcfg f_ "cannot set command for %s", $k
unless length $om->[0];
$om->[0] = $v;
}
printdebug "CL $c ", (join " ", map { shellquote } @vl),
"\n" if $debuglevel >= 4;
next unless @vl;
- badcfg "cannot configure options for $k"
+ badcfg f_ "cannot configure options for %s", $k
if $opts_opt_cmdonly{$k};
my $insertpos = $opts_cfg_insertpos{$k};
@$om = ( @$om[0..$insertpos-1],
// access_cfg('quilt-mode', 'RETURN-UNDEF')
// 'linear';
$quilt_mode =~ m/^($quilt_modes_re)$/
- or badcfg "unknown quilt-mode \`$quilt_mode'";
+ or badcfg f_ "unknown quilt-mode \`%s'", $quilt_mode;
$quilt_mode = $1;
}
next if defined $$vr;
$$vr = access_cfg($moc->{Key}, 'RETURN-UNDEF') // $moc->{Default};
my $v = $moc->{Vals}{$$vr};
- badcfg "unknown $moc->{Key} setting \`$$vr'" unless defined $v;
+ badcfg f_ "unknown %s setting \`%s'", $moc->{Key}, $$vr
+ unless defined $v;
$$vr = $v;
}
if (!defined $cleanmode) {
local $access_forpush;
- $cleanmode = access_cfg('clean-mode', 'RETURN-UNDEF');
+ $cleanmode = access_cfg('clean-mode-newer', 'RETURN-UNDEF');
+ $cleanmode = undef if $cleanmode && $cleanmode !~ m/^$cleanmode_re$/;
+
+ $cleanmode //= access_cfg('clean-mode', 'RETURN-UNDEF');
$cleanmode //= 'dpkg-source';
- badcfg "unknown clean-mode \`$cleanmode'" unless
- $cleanmode =~ m/^($cleanmode_re)$(?!\n)/s;
+ badcfg f_ "unknown clean-mode \`%s'", $cleanmode unless
+ $cleanmode =~ m/$cleanmode_re/;
}
$buildproductsdir //= access_cfg('build-products-dir', 'RETURN-UNDEF');
parseopts();
check_env_sanity();
-print STDERR "DRY RUN ONLY\n" if $dryrun_level > 1;
-print STDERR "DAMP RUN - WILL MAKE LOCAL (UNSIGNED) CHANGES\n"
+print STDERR __ "DRY RUN ONLY\n" if $dryrun_level > 1;
+print STDERR __ "DAMP RUN - WILL MAKE LOCAL (UNSIGNED) CHANGES\n"
if $dryrun_level == 1;
if (!@ARGV) {
print STDERR __ $helpmsg or confess $!;
my $pre_fn = ${*::}{"pre_$cmd"};
$pre_fn->() if $pre_fn;
-record_maindir if $invoked_in_git_tree;
+if ($invoked_in_git_tree) {
+ changedir_git_toplevel();
+ record_maindir();
+}
git_slurp_config();
my $fn = ${*::}{"cmd_$cmd"};
-$fn or badusage "unknown operation $cmd";
+$fn or badusage f_ "unknown operation %s", $cmd;
$fn->();
finish 0;
~ianmdlvl / dgit.git / blobdiff