our $sign = 1;
our $dryrun_level = 0;
our $changesfile;
-our $buildproductsdir = '..';
+our $buildproductsdir;
+our $bpd_glob;
our $new_package = 0;
-our $ignoredirty = 0;
+our $includedirty = 0;
our $rmonerror = 1;
our @deliberatelies;
our %previously;
autoflush STDOUT 1;
our $supplementary_message = '';
-our $need_split_build_invocation = 0;
+our $need_split_build_invocation = 1;
our $split_brain = 0;
END {
return $tagformatfn->($v, $distro);
}
-sub debiantag_maintview ($$) {
- my ($v,$distro) = @_;
- return "$distro/".dep14_version_mangle $v;
-}
-
sub madformat ($) { $_[0] eq '3.0 (quilt)' }
sub lbranch () { return "$branchprefix/$csuite"; }
our $dgit_privdir_made //= ensure_a_playground 'dgit';
}
+sub bpd_abs () {
+ my $r = $buildproductsdir;
+ $r = "$maindir/$r" unless $r =~ m{^/};
+ return $r;
+}
+
sub branch_gdr_info ($$) {
my ($symref, $head) = @_;
my ($status, $msg, $current, $ffq_prev, $gdrlast) =
}
my @inreleasefiles = grep { m#/InRelease$# } @releasefiles;
@releasefiles = @inreleasefiles if @inreleasefiles;
- die "apt updated wrong number of Release files (@releasefiles), erk"
+ if (!@releasefiles) {
+ fail <<END;
+apt seemed to not to update dgit's cached Release files for $isuite.
+(Perhaps $cache
+ is on a filesystem mounted `noatime'; if so, please use `relatime'.)
+END
+ }
+ die "apt updated too many Release files (@releasefiles), erk"
unless @releasefiles == 1;
($aptget_releasefile) = @releasefiles;
foreach my $fi (@dfi) {
my $f = $fi->{Filename};
die "$f ?" if $f =~ m#/|^\.|\.dsc$|\.tmp$#;
- my $upper_f = "$maindir/../$f";
+ my $upper_f = (bpd_abs()."/$f");
printdebug "considering reusing $f: ";
printdebug "linked (using ...,fetch).\n";
} elsif ((printdebug "($!) "),
$! != ENOENT) {
- fail "accessing ../$f,fetch: $!";
+ fail "accessing $buildproductsdir/$f,fetch: $!";
} elsif (link_ltarget $upper_f, $f) {
printdebug "linked.\n";
} elsif ((printdebug "($!) "),
$! != ENOENT) {
- fail "accessing ../$f: $!";
+ fail "accessing $buildproductsdir/$f: $!";
} else {
printdebug "absent.\n";
}
printdebug "linked.\n";
} elsif ((printdebug "($!) "),
$! != EEXIST) {
- fail "saving ../$f: $!";
+ fail "saving $buildproductsdir/$f: $!";
} elsif (!$refetched) {
printdebug "no need.\n";
} elsif (link $f, "$upper_f,fetch") {
printdebug "linked (using ...,fetch).\n";
} elsif ((printdebug "($!) "),
$! != EEXIST) {
- fail "saving ../$f,fetch: $!";
+ fail "saving $buildproductsdir/$f,fetch: $!";
} else {
printdebug "cannot.\n";
}
}
my @clogcmd = qw(dpkg-parsechangelog --format rfc822 --all);
- debugcmd "|",@clogcmd;
- open CLOGS, "-|", @clogcmd or die $!;
-
my $clogp;
my $r1clogp;
printdebug "import clog search...\n";
+ parsechangelog_loop \@clogcmd, "package changelog", sub {
+ my ($thisstanza, $desc) = @_;
+ no warnings qw(exiting);
- for (;;) {
- my $stanzatext = do { local $/=""; <CLOGS>; };
- printdebug "import clogp ".Dumper($stanzatext) if $debuglevel>1;
- last if !defined $stanzatext;
-
- my $desc = "package changelog, entry no.$.";
- open my $stanzafh, "<", \$stanzatext or die;
- my $thisstanza = parsecontrolfh $stanzafh, $desc, 1;
$clogp //= $thisstanza;
printdebug "import clog $thisstanza->{version} $desc...\n";
$r1clogp = $thisstanza;
printdebug "import clog $r1clogp->{version} becomes r1\n";
- }
- die $! if CLOGS->error;
- close CLOGS or $?==SIGPIPE or failedcmd @clogcmd;
+ };
$clogp or fail "package changelog has no entries!";
foreach my $fi (@dfi) {
my $f = $fi->{Filename};
next unless is_orig_file_in_dsc($f, \@dfi);
- complete_file_from_dsc('..', $fi)
+ complete_file_from_dsc($buildproductsdir, $fi)
or next;
}
}
}
}
- return if $ignoredirty;
+ return if $includedirty;
git_check_unmodified();
}
$@ =~ s/^\n//; chomp $@;
print STDERR <<END;
$@
-| Not fast forward; maybe --overwrite is needed, see dgit(1)
+| Not fast forward; maybe --overwrite is needed ? Please see dgit(1).
END
finish -1;
}
sub cmd_push_source {
prep_push();
+ fail "dgit push-source: --include-dirty/--ignore-dirty does not make".
+ "sense with push-source!" if $includedirty;
if ($changesfile) {
my $changes = parsecontrol("$buildproductsdir/$changesfile",
"source changes file");
@git, qw(pull --ff-only -q), "$playground/work", qw(master);
}
-sub quilt_fixup_mkwork ($) {
+sub unpack_playtree_mkwork ($) {
my ($headref) = @_;
mkdir "work" or die $!;
runcmd @git, qw(reset -q --hard), $headref;
}
-sub quilt_fixup_linkorigs ($$) {
+sub unpack_playtree_linkorigs ($$) {
my ($upstreamversion, $fn) = @_;
# calls $fn->($leafname);
- foreach my $f (<$maindir/../*>) { #/){
- my $b=$f; $b =~ s{.*/}{};
+ my $bpd_abs = bpd_abs();
+ opendir QFD, $bpd_abs or fail "buildproductsdir: $bpd_abs: $!";
+ while ($!=0, defined(my $b = readdir QFD)) {
+ my $f = bpd_abs()."/".$b;
{
local ($debuglevel) = $debuglevel-1;
printdebug "QF linkorigs $b, $f ?\n";
link_ltarget $f, $b or die "$b $!";
$fn->($b);
}
+ die "$buildproductsdir: $!" if $!;
+ closedir QFD;
}
sub quilt_fixup_delete_pc () {
# get it to generate debian/patches/debian-changes, it is
# necessary to build the source package.
- quilt_fixup_linkorigs($upstreamversion, sub { });
- quilt_fixup_mkwork($headref);
+ unpack_playtree_linkorigs($upstreamversion, sub { });
+ unpack_playtree_mkwork($headref);
rmtree("debian/patches");
print $fakedsc " ".$md->hexdigest." $size $b\n" or die $!;
};
- quilt_fixup_linkorigs($upstreamversion, $dscaddfile);
+ unpack_playtree_linkorigs($upstreamversion, $dscaddfile);
my @files=qw(debian/source/format debian/rules
debian/control debian/changelog);
next unless m/^(\w+) (\S.*\S)$/ && $2 eq $splitbrain_cachekey;
my $cachehit = $1;
- quilt_fixup_mkwork($headref);
+ unpack_playtree_mkwork($headref);
my $saved = maybe_split_brain_save $headref, $cachehit, "cache-hit";
if ($cachehit ne $headref) {
progress "dgit view: found cached ($saved)";
failed to apply your git tree's patch stack (from debian/patches/) to
the corresponding upstream tarball(s). Your source tree and .orig
are probably too inconsistent. dgit can only fix up certain kinds of
- anomaly (depending on the quilt mode). See --quilt= in dgit(1).
+ anomaly (depending on the quilt mode). Please see --quilt= in dgit(1).
END
}
changedir '..';
- quilt_fixup_mkwork($headref);
+ unpack_playtree_mkwork($headref);
my $mustdeletepc=0;
if (stat_exists ".pc") {
maybe_unapply_patches_again();
}
+# return values from massage_dbp_args are one or both of these flags
+sub WANTSRC_SOURCE () { 01; } # caller should build source (separately)
+sub WANTSRC_BUILDER () { 02; } # caller should run dpkg-buildpackage
+
sub build_or_push_prep_early () {
our $build_or_push_prep_early_done //= 0;
return if $build_or_push_prep_early_done++;
# unless we're not doing a split build and want dpkg-source
# as cleanmode, in which case we can do nothing
#
- # return values:
- # 0 - source will NOT need to be built separately by caller
- # +1 - source will need to be built separately by caller
- # +2 - source will need to be built separately by caller AND
- # dpkg-buildpackage should not in fact be run at all!
debugcmd '#massaging#', @$cmd if $debuglevel>1;
#print STDERR "MASS0 ",Dumper($cmd, $xargs, $need_split_build_invocation);
if ($cleanmode eq 'dpkg-source' && !$need_split_build_invocation) {
$clean_using_builder = 1;
- return 0;
+ return WANTSRC_BUILDER;
}
# -nc has the side effect of specifying -b if nothing else specified
# and some combinations of -S, -b, et al, are errors, rather than
}
push @$cmd, '-nc';
#print STDERR "MASS1 ",Dumper($cmd, $xargs, $dmode);
- my $r = 0;
+ my $r = WANTSRC_BUILDER;
if ($need_split_build_invocation) {
printdebug "massage split $dmode.\n";
- $r = $dmode =~ m/[S]/ ? +2 :
- $dmode =~ y/gGF/ABb/ ? +1 :
- $dmode =~ m/[ABb]/ ? 0 :
+ $r = $dmode =~ m/[S]/ ? WANTSRC_SOURCE :
+ $dmode =~ y/gGF/ABb/ ? WANTSRC_SOURCE | WANTSRC_BUILDER :
+ $dmode =~ m/[ABb]/ ? WANTSRC_BUILDER :
die "$dmode ?";
}
printdebug "massage done $r $dmode.\n";
return $r;
}
-sub in_parent (&) {
+sub in_bpd (&) {
my ($fn) = @_;
my $wasdir = must_getcwd();
- changedir "..";
+ changedir $buildproductsdir;
$fn->();
changedir $wasdir;
}
-sub postbuild_mergechanges ($) { # must run with CWD=.. (eg in in_parent)
+# this sub must run with CWD=$buildproductsdir (eg in in_bpd)
+sub postbuild_mergechanges ($) {
my ($msg_if_onlyone) = @_;
# If there is only one .changes file, fail with $msg_if_onlyone,
# or if that is undef, be a no-op.
# Returns the changes file to report to the user.
my $pat = changespat $version;
- my @changesfiles = glob $pat;
+ my @changesfiles = grep { !m/_multi\.changes/ } glob $pat;
@changesfiles = sort {
($b =~ m/_source\.changes$/ <=> $a =~ m/_source\.changes$/)
or $a cmp $b
sub midbuild_checkchanges () {
my $pat = changespat $version;
return if $rmchanges;
- my @unwanted = map { s#^\.\./##; $_; } glob "../$pat";
- @unwanted = grep { $_ ne changespat $version,'source' } @unwanted;
+ my @unwanted = map { s#.*/##; $_; } glob "$bpd_glob/$pat";
+ @unwanted = grep {
+ $_ ne changespat $version,'source' and
+ $_ ne changespat $version,'multi'
+ } @unwanted;
fail <<END
changes files other than source matching $pat already present; building would result in ambiguity about the intended results.
Suggest you delete @unwanted.
sub midbuild_checkchanges_vanilla ($) {
my ($wantsrc) = @_;
- midbuild_checkchanges() if $wantsrc == 1;
+ midbuild_checkchanges() if $wantsrc == (WANTSRC_SOURCE|WANTSRC_BUILDER);
}
sub postbuild_mergechanges_vanilla ($) {
my ($wantsrc) = @_;
- if ($wantsrc == 1) {
- in_parent {
+ if ($wantsrc == (WANTSRC_SOURCE|WANTSRC_BUILDER)) {
+ in_bpd {
postbuild_mergechanges(undef);
};
} else {
build_prep_early();
my @dbp = (@dpkgbuildpackage, qw(-us -uc), changesopts_initial(), @ARGV);
my $wantsrc = massage_dbp_args \@dbp;
- if ($wantsrc > 0) {
+ if ($wantsrc & WANTSRC_SOURCE) {
build_source();
midbuild_checkchanges_vanilla $wantsrc;
} else {
build_prep();
}
- if ($wantsrc < 2) {
+ if ($wantsrc & WANTSRC_BUILDER) {
push @dbp, changesopts_version();
maybe_apply_patches_dirtily();
runcmd_ordryrun_local @dbp;
# orig is absent.
my $upstreamversion = upstreamversion $version;
my $origfnpat = srcfn $upstreamversion, '.orig.tar.*';
- my $gbp_make_orig = $version =~ m/-/ && !(() = glob "../$origfnpat");
+ my $gbp_make_orig = $version =~ m/-/ && !(() = glob "$bpd_glob/$origfnpat");
if ($gbp_make_orig) {
clean_tree();
}
}
- if ($wantsrc > 0) {
+ if ($wantsrc & WANTSRC_SOURCE) {
build_source();
midbuild_checkchanges_vanilla $wantsrc;
} else {
build_prep();
}
maybe_unapply_patches_again();
- if ($wantsrc < 2) {
+ if ($wantsrc & WANTSRC_BUILDER) {
push @cmd, changesopts();
runcmd_ordryrun_local @cmd, @ARGV;
}
build_prep();
$sourcechanges = changespat $version,'source';
if (act_local()) {
- unlink "../$sourcechanges" or $!==ENOENT
+ unlink "$buildproductsdir/$sourcechanges" or $!==ENOENT
or fail "remove $sourcechanges: $!";
}
$dscfn = dscfn($version);
($f =~ m/\.debian\.tar(?:\.\w+)$/ &&
$f eq srcfn($version, $&));
printdebug "source copy, found $f - renaming\n";
- rename "$playground/$f", "../$f" or $!==ENOENT
+ rename "$playground/$f", "$buildproductsdir/$f" or $!==ENOENT
or fail "put in place new source file ($f): $!";
}
} else {
}
runcmd_ordryrun_local qw(sh -ec),
'exec >$1; shift; exec "$@"','x',
- "../$sourcechanges",
+ "$buildproductsdir/$sourcechanges",
@dpkggenchanges, qw(-S), changesopts();
}
sub cmd_sbuild {
build_source();
midbuild_checkchanges();
- in_parent {
+ in_bpd {
if (act_local()) {
stat_exists $dscfn or fail "$dscfn (in parent directory): $!";
stat_exists $sourcechanges
runcmd_ordryrun_local @sbuild, qw(-d), $isuite, @ARGV, $dscfn;
};
maybe_unapply_patches_again();
- in_parent {
+ in_bpd {
postbuild_mergechanges(<<END);
perhaps you need to pass -A ? (sbuild's default is to build only
arch-specific binaries; dgit 1.4 used to override that.)
my @dfi = dsc_files_info();
foreach my $fi (@dfi) {
my $f = $fi->{Filename};
- my $here = "../$f";
+ my $here = "$buildproductsdir/$f";
if (lstat $here) {
next if stat $here;
fail "lstat $here works but stat gives $! !";
} elsif (m/^--(gbp|dpm)$/s) {
push @ropts, "--quilt=$1";
$quilt_mode = $1;
- } elsif (m/^--ignore-dirty$/s) {
+ } elsif (m/^--(?:ignore|include)-dirty$/s) {
push @ropts, $_;
- $ignoredirty = 1;
+ $includedirty = 1;
} elsif (m/^--no-quilt-fixup$/s) {
push @ropts, $_;
$quilt_mode = 'nocheck';
$need_split_build_invocation ||= quiltmode_splitbrain();
+ fail "dgit: --include-dirty is not supported in split view quilt mode"
+ if $split_brain && $includedirty;
+
if (!defined $cleanmode) {
local $access_forpush;
$cleanmode = access_cfg('clean-mode', 'RETURN-UNDEF');
badcfg "unknown clean-mode \`$cleanmode'" unless
$cleanmode =~ m/^($cleanmode_re)$(?!\n)/s;
}
+
+ $buildproductsdir //= access_cfg('build-products-dir', 'RETURN-UNDEF');
+ $buildproductsdir //= '..';
+ $bpd_glob = $buildproductsdir;
+ $bpd_glob =~ s#[][\\{}*?~]#\\$&#g;
}
if ($ENV{$fakeeditorenv}) {
~ianmdlvl / dgit.git / blobdiff