From: nickthetait Date: Mon, 23 Nov 2015 17:39:08 +0000 (-0700) Subject: Initial fakeouts for Mangrove X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=cura.git;a=commitdiff_plain;h=730e8f2c1c8dfc9498a1b416cc398606f60940c3 Initial fakeouts for Mangrove Plenty of things are misplaced, broken and poorly implemented yet --- diff --git a/Cura/gui/configWizard.py b/Cura/gui/configWizard.py index eedc7e39..b5d8fa92 100644 --- a/Cura/gui/configWizard.py +++ b/Cura/gui/configWizard.py @@ -1112,10 +1112,16 @@ class LulzbotMachineSelectPage(InfoPage): self.LulzbotMini = self.AddImageButton(self.panel, 0, 0, _("LulzBot Mini"), 'Lulzbot_mini.jpg', image_size, style=ImageButton.IB_GROUP) self.LulzbotMini.OnSelected(self.OnLulzbotMiniSelected) - self.LulzbotTaz = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 4 or 5"), + + self.LulzbotTaz6 = self.AddImageButton(self.panel, 0, 1, _("LulzBot TAZ 6"), + 'Lulzbot_TAZ6.jpg', image_size) + self.LulzbotTaz6.OnSelected(self.OnLulzbotTaz6Selected) + + self.LulzbotTaz = self.AddImageButton(self.panel, 1, 0, _("LulzBot TAZ 4 or 5"), 'Lulzbot_TAZ5.jpg', image_size) self.LulzbotTaz.OnSelected(self.OnLulzbotTazSelected) - self.OtherPrinters = self.AddImageButton(self.panel, 1, 0, _("Other Printers"), + + self.OtherPrinters = self.AddImageButton(self.panel, 1, 1, _("Other Printers"), 'Generic-3D-Printer.png', image_size) self.OtherPrinters.OnSelected(self.OnOthersSelected) self.LulzbotMini.SetValue(True) @@ -1131,6 +1137,9 @@ class LulzbotMachineSelectPage(InfoPage): wx.wizard.WizardPageSimple.Chain(self.GetParent().lulzbotMiniToolheadPage, self.GetParent().lulzbotReadyPage) + def OnLulzbotTaz6Selected(self): + wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTaz6SelectPage) + def OnLulzbotTazSelected(self): wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotTazSelectPage) @@ -1213,10 +1222,35 @@ class LulzbotMiniToolheadSelectPage(InfoPage): profile.putMachineSetting('toolhead_shortname', 'Flexystruder') profile.putMachineSetting('machine_type', 'lulzbot_mini_flexystruder') +class LulzbotTaz6SelectPage(InfoPage): + def __init__(self, parent): + super(LulzbotTaz6SelectPage, self).__init__(parent, _("LulzBot TAZ 6 Selection")) + + self.panel = self.AddPanel() + image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT) + self.taz6 = self.AddImageButton(self.panel, 0, 0, _('Tilapia'), + 'Lulzbot_Toolhead_TAZ_Tilapia.jpg', image_size, + style=ImageButton.IB_GROUP) + self.taz6.OnSelected(self.OnTilapiaSelected) + self.taz6.SetValue(True) + + def OnPageShown(self): + self.taz6.TriggerGroupCallbacks() + + def OnTilapiaSelected(self): + wx.wizard.WizardPageSimple.Chain(self, self.GetParent().lulzbotReadyPage) + + def StoreData(self): + profile.putProfileSetting('nozzle_size', '0.5') + profile.putMachineSetting('extruder_amount', '1') + profile.putMachineSetting('toolhead', 'Single Extruder Tilapia') + profile.putMachineSetting('toolhead_shortname', 'Tilapia') + profile.putMachineSetting('machine_type', 'lulzbot_TAZ_6_Single_Tilapia') + profile.putMachineSetting('machine_name', 'LulzBot TAZ 6') class LulzbotTazSelectPage(InfoPage): def __init__(self, parent): - super(LulzbotTazSelectPage, self).__init__(parent, _("LulzBot TAZ Selection")) + super(LulzbotTazSelectPage, self).__init__(parent, _("LulzBot TAZ 4-5 Selection")) self.panel = self.AddPanel() image_size=(LulzbotMachineSelectPage.IMAGE_WIDTH, LulzbotMachineSelectPage.IMAGE_HEIGHT) @@ -1494,6 +1528,7 @@ class LulzbotChangeToolheadWizard(wx.wizard.Wizard): self.lulzbotTaz5NozzleSelectPage = LulzbotTaz5NozzleSelectPage(self) self.lulzbotTazBedSelectPage = LulzbotTazBedSelectPage(self) self.lulzbotTazSelectPage = LulzbotTazSelectPage(self) + self.lulzbotTaz6SelectPage = LulzbotTaz6SelectPage(self) wx.wizard.WizardPageSimple.Chain(self.lulzbotMiniToolheadPage, self.lulzbotReadyPage) wx.wizard.WizardPageSimple.Chain(self.lulzbotTazHotendPage, self.lulzbotTazToolheadPage) diff --git a/Cura/gui/firmwareInstall.py b/Cura/gui/firmwareInstall.py index 5220e796..722a293b 100644 --- a/Cura/gui/firmwareInstall.py +++ b/Cura/gui/firmwareInstall.py @@ -39,7 +39,8 @@ def getDefaultFirmware(machineIndex = None): 'lulzbot_TAZ_4_FlexyDuallyV1': "Taz4-5-Dual-or-FlexyDually-Budaschnozzle-2015Q1.hex", 'lulzbot_TAZ_5_FlexyDuallyV1': "Taz4-5-Dual-or-FlexyDually-Budaschnozzle-2015Q1.hex", 'lulzbot_TAZ_4_FlexyDuallyV2': "Taz4-5-FlexyDually-LBHexagon-2015Q3.hex", - 'lulzbot_TAZ_5_FlexyDuallyV2': "Taz4-5-FlexyDually-LBHexagon-2015Q3.hex" + 'lulzbot_TAZ_5_FlexyDuallyV2': "Taz4-5-FlexyDually-LBHexagon-2015Q3.hex", + 'lulzbot_TAZ_6_SingleTilapia': "Taz6-Single-Tilapia-2015-Q4.hex" } machine_type = profile.getMachineSetting('machine_type', machineIndex) extruders = profile.getMachineSettingFloat('extruder_amount', machineIndex) diff --git a/Cura/util/profile.py b/Cura/util/profile.py index dcd78cc7..d170dc71 100644 --- a/Cura/util/profile.py +++ b/Cura/util/profile.py @@ -1213,8 +1213,10 @@ def calculateObjectSizeOffsets(): def getMachineCenterCoords(): if getMachineSetting('machine_center_is_zero') == 'True': return [0, 0] - elif getMachineSetting('machine_type') == 'lulzbot_mini': - return [(getMachineSettingFloat('machine_width') / 2) + 2.5, (getMachineSettingFloat('machine_width') / 2) + 0.5] + elif getMachineSetting('machine_type') == 'lulzbot_mini' or \ + getMachineSetting('machine_type') == 'lulzbot_TAZ_6': + return [(getMachineSettingFloat('machine_width') / 2) + 2.5, + (getMachineSettingFloat('machine_width') / 2) + 0.5] return [getMachineSettingFloat('machine_width') / 2, getMachineSettingFloat('machine_depth') / 2] #Returns a list of convex polygons, first polygon is the allowed area of the machine, diff --git a/resources/images/Lulzbot_TAZ6.jpg b/resources/images/Lulzbot_TAZ6.jpg new file mode 100644 index 00000000..4ba0eed4 Binary files /dev/null and b/resources/images/Lulzbot_TAZ6.jpg differ diff --git a/resources/images/Lulzbot_Toolhead_TAZ_Tilapia.jpg b/resources/images/Lulzbot_Toolhead_TAZ_Tilapia.jpg new file mode 100644 index 00000000..f4942950 Binary files /dev/null and b/resources/images/Lulzbot_Toolhead_TAZ_Tilapia.jpg differ diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/ABS/material.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/ABS/material.ini new file mode 100644 index 00000000..c554ad1b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/ABS/material.ini @@ -0,0 +1,2 @@ +[info] +disabled = true diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PET/material.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PET/material.ini new file mode 100644 index 00000000..c554ad1b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PET/material.ini @@ -0,0 +1,2 @@ +[info] +disabled = true diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA/material.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA/material.ini new file mode 100644 index 00000000..c554ad1b --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA/material.ini @@ -0,0 +1,2 @@ +[info] +disabled = true diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/high-speed/profile.ini new file mode 100644 index 00000000..2920be65 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ6_single_tilapia/PLA_high-speed_TAZ6_single-tilapia_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/material.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/material.ini new file mode 100644 index 00000000..c461a40a --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_VP/material.ini @@ -0,0 +1,5 @@ +[info] +name = PLA (Village Plastics) +material_types = Beginner +order = 2 +url = lulzbot.com/store/filament/pla-village?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/high-speed/profile.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/high-speed/profile.ini new file mode 100644 index 00000000..2920be65 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/high-speed/profile.ini @@ -0,0 +1,4 @@ +[info] +name = High speed +order = 1 +profile_file = ../../../lulzbot_profiles/TAZ6_single_tilapia/PLA_high-speed_TAZ6_single-tilapia_cura.ini diff --git a/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/material.ini b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/material.ini new file mode 100644 index 00000000..1f4e59e1 --- /dev/null +++ b/resources/quickprint/lulzbot_TAZ_6_SingleTilapia/PLA_eSUN/material.ini @@ -0,0 +1,5 @@ +[info] +name = PLA (eSUN) +material_types = Beginner +order = 1 +url = lulzbot.com/store/filament/pla-esun?pk_campaign=software-cura diff --git a/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_high-speed_TAZ6_single-tilapia_cura.ini b/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_high-speed_TAZ6_single-tilapia_cura.ini new file mode 100644 index 00000000..728af6c8 --- /dev/null +++ b/resources/quickprint/lulzbot_profiles/TAZ6_single_tilapia/PLA_high-speed_TAZ6_single-tilapia_cura.ini @@ -0,0 +1,297 @@ +[profile] +layer_height = 0.38 +wall_thickness = 1.0 +retraction_enable = True +solid_layer_thickness = 0.88 +fill_density = 20 +perimeter_before_infill = True +nozzle_size = 0.5 +print_speed = 50 +print_temperature = 205 +print_temperature2 = 0 +print_temperature3 = 0 +print_temperature4 = 0 +print_temperature5 = 0 +print_bed_temperature = 60 +support = None +platform_adhesion = None +support_dual_extrusion = Both +wipe_tower = False +wipe_tower_volume = 15 +ooze_shield = False +filament_diameter = 2.85 +filament_diameter2 = 0 +filament_diameter3 = 0 +filament_diameter4 = 0 +filament_diameter5 = 0 +filament_flow = 100.0 +retraction_speed = 10 +retraction_amount = 1 +retraction_dual_amount = 16.5 +retraction_min_travel = 1.5 +retraction_combing = All +retraction_minimal_extrusion = 0.005 +retraction_hop = 0.1 +bottom_thickness = 0.425 +layer0_width_factor = 125 +object_sink = 0.0 +overlap_dual = 0.15 +travel_speed = 175 +bottom_layer_speed = 15 +infill_speed = 55 +solidarea_speed = 45 +inset0_speed = 45 +insetx_speed = 50 +cool_min_layer_time = 15 +fan_enabled = True +skirt_line_count = 1 +skirt_gap = 3.0 +skirt_minimal_length = 250 +fan_full_height = 0.5 +fan_speed = 40 +fan_speed_max = 60 +cool_min_feedrate = 10 +cool_head_lift = False +solid_top = True +solid_bottom = True +fill_overlap = 15 +support_type = Lines +support_angle = 45 +support_fill_rate = 30 +support_xy_distance = 0.7 +support_z_distance = 0.05 +spiralize = False +simple_mode = False +brim_line_count = 10 +raft_margin = 5.0 +raft_line_spacing = 3.0 +raft_base_thickness = 0.3 +raft_base_linewidth = 1.0 +raft_interface_thickness = 0.27 +raft_interface_linewidth = 0.4 +raft_airgap_all = 0.0 +raft_airgap = 0.5 +raft_surface_layers = 2 +raft_surface_thickness = 0.27 +raft_surface_linewidth = 0.4 +fix_horrible_union_all_type_a = True +fix_horrible_union_all_type_b = False +fix_horrible_use_open_bits = False +fix_horrible_extensive_stitching = False +plugin_config = (lp1 + . +object_center_x = -1 +object_center_y = -1 +simplemodesettings = +simplemodeprofile = 2_normal +simplemodematerial = 1_pla +simplemodematerialtype = Beginner + +[alterations] +start.gcode = G21 + M107 ; disable fans + G21 ; metric values + G90 ; absolute positioning + M82 ; set extruder to absolute mode + M107 ; start with the fan off + G92 E0 ; set extruder position to 0 + M140 S{print_bed_temperature}; get bed heating up + G28 ; home all + M109 S130 ; set to cleaning temp and wait + G1 E-30 F100 ; suck up XXmm of filament + M109 S140 ; heat to probe temp + G1 X-15 Y100 F3000 ; move above wiper pad + G1 Z2 ; Push nozzle into wiper + G1 X-17 Y95 F1000 ; slow wipe + G1 X-17 Y90 F1000 ; slow wipe + G1 X-17 Y85 F1000 ; slow wipe + G1 X-15 Y90 F1000 ; slow wipe + G1 X-17 Y80 F1000 ; slow wipe + G1 X-15 Y95 F1000 ; slow wipe + G1 X-17 Y75 F2000 ; fast wipe + G1 X-15 Y65 F2000 ; fast wipe + G1 X-17 Y70 F2000 ; fast wipe + G1 X-15 Y60 F2000 ; fast wipe + G1 X-17 Y55 F2000 ; fast wipe + G1 X-15 Y50 F2000 ; fast wipe + G1 X-17 Y40 F2000 ; fast wipe + G1 X-15 Y45 F2000 ; fast wipe + G1 X-17 Y35 F2000 ; fast wipe + G1 X-15 Y40 F2000 ; fast wipe + G1 X-17 Y70 F2000 ; fast wipe + G1 X-15 Y30 Z2 F2000 ; fast wipe + G1 X-17 Y35 F2000 ; fast wipe + G1 X-15 Y25 F2000 ; fast wipe + G1 X-17 Y30 F2000 ; fast wipe + G1 X-15 Y25 Z1.5 F1000 ; slow wipe + G1 X-17 Y23 F1000 ; slow wipe + G1 Z10 ; raise extruder + G1 Y10 ; move above probe + M109 S170 ; set to probing temp + M204 S100 ; set accel for probing + G29 ; Probe + M204 S700 ; set accel back to normal + G1 X0 Y0 Z15 F5000 ; get out the way + M400 ; clear buffer + G4 S1 ; pause + M109 S{print_temperature} ; set extruder temp and wait + G4 S25 ; wait for bed to temp up + G1 Z2 E0 F75 ; extrude filament back into nozzle + M140 S{print_bed_temperature}; get bed temping up during first layer + M117 Taz Printing... ; Message +end.gcode = M400 + M104 S0 ; hotend off + M140 S0 ; heated bed heater off (if you have it) + M107 ; fans off + G91 ; relative positioning + G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F3000 ; move Z up a bit and retract filament even more + G90 ; absolute positioning + G1 X0 Y250 ; move to cooling position + M84 ; steppers off + G90 ; absolute positioning + M117 TAZ 6 Ready. + ;{profile_string} +start2.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end2.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start3.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T2 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end3.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +start4.gcode = ;Sliced at: {day} {date} {time} + ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density} + ;Print time: {print_time} + ;Filament used: {filament_amount}m {filament_weight}g + ;Filament cost: {filament_cost} + ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line + ;M104 S{print_temperature} ;Uncomment to add your own temperature line + ;M109 T2 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T1 S{print_temperature2} ;Uncomment to add your own temperature line + ;M109 T0 S{print_temperature} ;Uncomment to add your own temperature line + G21 ;metric values + G90 ;absolute positioning + M107 ;start with the fan off + G28 X0 Y0 ;move X/Y to min endstops + G28 Z0 ;move Z to min endstops + G1 Z15.0 F{travel_speed} ;move the platform down 15mm + T3 ;Switch to the 4th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T2 ;Switch to the 3th extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T1 ;Switch to the 2nd extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F200 E-{retraction_dual_amount} + T0 ;Switch to the first extruder + G92 E0 ;zero the extruded length + G1 F200 E10 ;extrude 10mm of feed stock + G92 E0 ;zero the extruded length again + G1 F{travel_speed} + ;Put printing message on LCD screen + M117 Printing... +end4.gcode = ;End GCode + M104 T0 S0 ;extruder heater off + M104 T1 S0 ;extruder heater off + M104 T2 S0 ;extruder heater off + M104 T3 S0 ;extruder heater off + M140 S0 ;heated bed heater off (if you have it) + G91 ;relative positioning + G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure + G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more + G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way + M84 ;steppers off + G90 ;absolute positioning + ;{profile_string} +support_start.gcode = +support_end.gcode = +cool_start.gcode = +cool_end.gcode = +replace.csv = +preswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added before the T(n) +postswitchextruder.gcode = ;Switch between the current extruder and the next extruder, when printing with multiple extruders. + ;This code is added after the T(n) + diff --git a/scripts/recreate_lulzbot_profiles.py b/scripts/recreate_lulzbot_profiles.py index 5d7cbc11..981b50f0 100644 --- a/scripts/recreate_lulzbot_profiles.py +++ b/scripts/recreate_lulzbot_profiles.py @@ -37,6 +37,7 @@ dir_map = { 'lulzbot_TAZ_5_FlexyDuallyV1'), 'TAZ_flexy_dually_v2': ('lulzbot_TAZ_4_FlexyDuallyV2', 'lulzbot_TAZ_5_FlexyDuallyV2'), + 'TAZ6_single_tilapia': ('lulzbot_TAZ_6_SingleTilapia',), } material_map = {