X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?p=cura.git;a=blobdiff_plain;f=resources%2Fquickprint%2Flulzbot_profiles%2FMini_single_extruder_v2%2Flaybrick_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini;h=9c949c80afdf33941c7e22191d2757ee071ab1a7;hp=a0c3908d01fb200552d5d79f06422e9e33977c75;hb=7af1ba0bf830e84ead7ac3e4814596981df330b1;hpb=cd74299799650863f1d25cf9ba5c4c4263b52322

diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/laybrick_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/laybrick_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
index a0c3908d..9c949c80 100644
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/laybrick_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/laybrick_medium-quality_Mini_single-extruder-v2_0.5noz_cura.ini
@@ -142,18 +142,19 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
 	G1 Z2 E0 F75                 ; extrude filament back into nozzle
 	M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
-	M400
-	M104 S0                                      ; hotend off
-	M140 S0                                      ; heated bed heater off (if you have it)
-	M107                                         ; fans off
-	G92 E5                                       ; set extruder to 5mm for retract on print end
-	G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
-	M190 R50                                     ; wait for bed to cool
-	M140 S0                                      ; bed off
-	G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
-	M84                                          ; steppers off
-	G90                                          ; absolute positioning
-	;{profile_string}
+    M400
+    M104 S0                                      ; hotend off
+    M140 S0                                      ; heated bed heater off (if you have it)
+    M107                                         ; fans off
+    G92 E5                                       ; set extruder to 5mm for retract on print end
+    G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
+    M190 R50                                     ; wait for bed to cool
+    M140 S0                                      ;
+    G1 X145 F1000                                ; move to cooling positioning
+    G1 Y175 F1000                                ; move to cooling positioning
+    M84                                          ; steppers off
+    G90                                          ; absolute positioning
+    ;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
 	;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
 	;Print time: {print_time}