Update all profiles for LulzBot Mini

[cura.git] / resources / quickprint / lulzbot_profiles / Mini_single_extruder_v2 / polycarbonate_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini

diff --git a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/polycarbonate_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/polycarbonate_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
index 32632143f31efe574a2f83cd43662102eae1c969..f7a0853d5bce062494d568a77f5e4fc8d2d54bf4 100644 (file)
--- a/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/polycarbonate_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
+++ b/resources/quickprint/lulzbot_profiles/Mini_single_extruder_v2/polycarbonate_high-speed_Mini_single-extruder-v2_0.5noz_cura.ini
@@ -142,18 +142,19 @@ start.gcode = ;This Gcode has been generated specifically for the LulzBot Mini
        G1 Z2 E0 F75                 ; extrude filament back into nozzle
        M140 S{print_bed_temperature}; get bed temping up during first layer
 end.gcode = 
-       M400
-       M104 S0                                      ; hotend off
-       M140 S0                                      ; heated bed heater off (if you have it)
-       M107                                         ; fans off
-       G92 E5                                       ; set extruder to 5mm for retract on print end
-       G1 X5 Y5 Z156 E0 F10000                      ; move to cooling positioning
-       M190 R50                                     ; wait for bed to cool
-       M140 S0                                      ; bed off
-       G1 X145 Y175 Z156 F1000                      ; move to cooling positioning
-       M84                                          ; steppers off
-       G90                                          ; absolute positioning
-       ;{profile_string}
+    M400
+    M104 S0                                      ; hotend off
+    M140 S0                                      ; heated bed heater off (if you have it)
+    M107                                         ; fans off
+    G92 E5                                       ; set extruder to 5mm for retract on print end
+    G1 X5 Y5 Z158 E0 F10000                      ; move to cooling positioning
+    M190 R50                                     ; wait for bed to cool
+    M140 S0                                      ;
+    G1 X145 F1000                                ; move to cooling positioning
+    G1 Y175 F1000                                ; move to cooling positioning
+    M84                                          ; steppers off
+    G90                                          ; absolute positioning
+    ;{profile_string}
 start2.gcode = ;Sliced at: {day} {date} {time}
        ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
        ;Print time: {print_time}