G1 Z2 E0 F75 ; extrude filament back into nozzle
M140 S{print_bed_temperature}; get bed temping up during first layer
end.gcode =
- M400
- M104 S0 ; hotend off
- M140 S0 ; heated bed heater off (if you have it)
- M107 ; fans off
- G92 E5 ; set extruder to 5mm for retract on print end
- G1 X5 Y5 Z156 E0 F10000 ; move to cooling positioning
- M190 R50 ; wait for bed to cool
- M140 S0 ; bed off
- G1 X145 Y175 Z156 F1000 ; move to cooling positioning
- M84 ; steppers off
- G90 ; absolute positioning
- ;{profile_string}
+ M400
+ M104 S0 ; hotend off
+ M140 S0 ; heated bed heater off (if you have it)
+ M107 ; fans off
+ G92 E5 ; set extruder to 5mm for retract on print end
+ G1 X5 Y5 Z158 E0 F10000 ; move to cooling positioning
+ M190 R50 ; wait for bed to cool
+ M140 S0 ;
+ G1 X145 F1000 ; move to cooling positioning
+ G1 Y175 F1000 ; move to cooling positioning
+ M84 ; steppers off
+ G90 ; absolute positioning
+ ;{profile_string}
start2.gcode = ;Sliced at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}